- All
- Favorite
- Popular
- Most rated
| Brand | IMCE |
|---|---|
| Model | HTVP1600C |
| Measurement Principle | Resonant Frequency Method |
| Frequency Range | 1–100 kHz |
| Damping Factor (tan δ) | 1×10⁻⁵ to 0.1 |
| Temperature Range | Ambient to 1600 °C |
| Atmosphere Control | Yes |
| Compliance | ASTM E1876-99 |
| Output Parameters | Young’s Modulus, Shear Modulus, Poisson’s Ratio, Internal Friction (Q⁻¹) |
| Brand | Galdabini |
|---|---|
| Origin | Italy |
| Model | Impact25 |
| Maximum Impact Energy | 25 J |
| Test Configurations | Charpy (simply supported beam), Izod (cantilever beam), and Tensile Impact |
| Compliant Standards | ASTM D256, ASTM D6110, ISO 180, ISO 179, DIN 53438, EN ISO 8256, JIS K7111 |
| Control System | Microprocessor-based with automatic friction compensation |
| Data Interface | RS-232 serial port |
| Software Support | GraphWork data analysis suite |
| Certification | Manufactured in accordance with ISO 9001 quality management system |
| Brand | NOSELAB ATS |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | 1120218 |
| Display | 5-digit LCD |
| Resolution | 0.001 mm |
| Accuracy | ±0.002 mm |
| Measurement Range | 0–12.5 mm or 0–25 mm (selectable) |
| Zeroing | Manual mechanical zero adjustment |
| Output Interface | RS-232 serial port (printer-compatible) |
| Power Supply | 3 V lithium battery |
| Battery Life | Up to 4000 hours of continuous operation |
| Standard Accessories | Bench-mounted base, precision anvil, calibrated contact probe |
| Optional Accessories | Weighted loading kit (for standardized compressive force), V-groove depth probe |
| Brand | IMCE |
|---|---|
| Model | HTVP650C |
| Measurement Principle | Impulse Excitation Technique (IET) / Resonance Frequency Analysis |
| Frequency Range | 1–100 kHz |
| Elastic Modulus Accuracy | < ±0.1% |
| Repeatability | < ±0.2% |
| Damping Resolution | down to 1×10⁻⁵ |
| Sample Dimensions | Length 20–300 mm, Width 2–130 mm |
| Maximum Operating Temperature | 650 °C (upgradable to 1100 °C) |
| Compliance | ASTM C1259, ASTM E1187 |
| Software | Integrated IET data acquisition & analysis suite with temperature correlation module |
| Excitation | Automated electromagnetic impulse system |
| Data Output | Young’s modulus (E), Shear modulus (G), Poisson’s ratio (ν), Resonant frequencies (f₁, f₂, …), Internal friction (Q⁻¹) |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Status | Authorized Distributor |
| Product Origin | Imported |
| Model | EA05 |
| Pricing | Upon Request |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 29/53 |
| Pricing | Upon Request |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Model | Code 1005705 |
| Construction | Benchtop stainless steel test chamber with integrated fume extraction system |
| Flame Calibration | Compliant with ASTM D 5207 for 20 mm and 125 mm flame verification |
| Gas Supply | Methane feed panel with precision flowmeter, adjustable valve, and pressure gauge |
| Operator Interface | Dual hand-access ports with front-opening tempered glass viewing panels |
| Safety Integration | Built-in fume aspirator with foot-pedal activation |
| Compliance | Designed for UL 94 HB, V-0, V-1, V-2, 5VA, 5VB, VTM-1, and VTM-2 test protocols |
| Brand | COFOMEGRA |
|---|---|
| Origin | Italy |
| Model | CORROSIONBOX |
| Chamber Capacity | 450 L / 1000 L |
| Internal Dimensions (W×D×H) | 800×700×800 mm / 1100×800×1100 mm |
| External Dimensions (W×D×H) | 1320×720×1450 mm / 1640×820×1750 mm |
| Weight | 260 kg / 465 kg |
| Salt Solution Reservoir Capacity | 110 L / 260 L |
| Construction Material | 10 mm thick polypropylene (PP) |
| Chamber Insulation | Double-wall insulated |
| Temperature Range (Salt Fog Mode) | 35°C ± 2°C (standard) |
| Temperature Range (Condensation Mode) | 40°C ± 1°C |
| 雾化方� | �: Compressed air-driven saturated mist generation via central nozzle and diffusion tower |
| Heating System | Immersed heating elements with PID-controlled uniformity |
| Drainage | Integrated floor-level sump with gravity drainage |
| Compliance | Designed to meet ASTM B117, ISO 9227, JIS Z2201, DIN 50021 requirements |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | CLIMATIC RH SERIES |
| Price | Upon Request |
| Chamber Volume | 100–1000 L |
| Temperature Range (dry) | 0–95°C |
| Temperature Uniformity (dry) | ±1°C |
| Temperature Uniformity (humid) | ±2°C |
| Relative Humidity Range | 10–98% RH |
| RH Stability | ±3% RH |
| Refrigerant | R134a (CFC-free) |
| Construction | Stainless Steel Interior |
| Cooling System | Air-Cooled Condenser |
| Humidity Generation | Continuous Water Feed |
| Dehumidification | Dedicated Evaporator |
| Control System | Dual-Channel Microprocessor |
| Viewing Window | Integrated Tempered Glass |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Code 10004050 |
| Pricing | Upon Request |
| Brand | NOSELAB ATS |
|---|---|
| Origin | Italy |
| Model | IMPats 15/25/50 |
| Impact Energy Range | 0–15 J, 0–25 J, 0–50 J |
| Impact Velocity | 2.9 m/s, 3.46 m/s, 3.8 m/s (model-dependent) |
| Pendulum Moment (Impact Constant) | Calibrated per energy range |
| Load Cell Range | Matched to nominal impact energy (0–15 J / 0–25 J / 0–50 J) |
| Maximum Lifting Height | Compliant with ISO 179, ISO 180, ASTM D256, ASTM E23, DIN 53438, UNI EN ISO 13802 |
| Brand | COFOMEGRA |
|---|---|
| Origin | Italy |
| Model | SOLARBOX Xe/R.H. |
| Chamber Volume | 40 L (SOLARBOX 1500e) / 75 L (SOLARBOX 3000e) |
| Temperature Range | 35–100 °C |
| Humidity Control | Optional Relative Humidity Monitoring |
| Irradiance Control | Continuous, Closed-Loop via Integrated Radiometer |
| UV Cut-off Filters | 280 nm, 300 nm, 310 nm, and IR-reducing filter |
| Sample Capacity | ≥120 pcs (15 × 30 mm) for 1500e |
| Programmable Cycles | Up to 15 multi-step programs |
| Interface | RS232-C for data logging and remote control |
| Compliance | ASTM G155, ISO 4892-2, ISO 11341, SAE J2527, DIN 75220, UNI EN 13523-13 |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Authorization Status | Authorized Distributor |
| Import Status | Imported |
| Model No. | 10097101 |
| Power Supply | 400 V AC, 50 Hz, 3-phase, 32 A |
| Fuel Gas | Methane |
| Display | 17-inch integrated touchscreen |
| Standards Compliance | ISO 5660-1, ASTM E1354, BS EN ISO 5660-1, NFPA 271 |
| Key Measured Parameters | Heat Release Rate (HRR), Time to Ignition (TTI), Mass Loss Rate (MLR), Effective Heat of Combustion (EHC), Smoke Production Rate (SPR), CO/CO₂ Yield, Oxygen Consumption |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SC-610 |
| Pricing | Available Upon Request |
| Standards Compliance | NFPA 258-T, ASTM E662, BS 6401, ATS 1000.001 |
| Internal Chamber Dimensions | 914 × 610 × 614 mm (L × W × H) |
| Radiant Heat Source | 900 W adjustable furnace, max irradiance 2.5 W/cm² |
| Multi-flame Combustion Burner | Integrated gas mixing flowmeter, temperature-controlled |
| Optical Path | Collimated light beam (λ = 550 nm), photometric detection of transmitted intensity |
| Sample Holders | Three motorized, precision-positioned fixtures with automated insertion/retraction |
| Exhaust System | Servo-controlled pneumatic damper with differential pressure sensor |
| Control Interface | Touch-enabled digital panel with real-time parameter monitoring and preset profile storage |
| Data Acquisition | PC-based software with automated optical density (Ds) calculation per ASTM E662 §7.3, time-resolved smoke density curves (Ds vs. t), and integrated area under curve (AUC) reporting |
| Brand | IMCE |
|---|---|
| Model | RFDA MF Professional |
| Origin | Belgium |
| Application | Non-destructive dynamic mechanical characterization of ceramics, metals, and advanced materials |
| Temperature Range | Ambient to 1750 °C |
| Atmosphere Control | Yes |
| Damping Measurement Range | 1×10⁻⁵ to 0.1 (dimensionless) |
| Measured Parameters | Resonant frequency, elastic modulus (E), shear modulus (G), Poisson’s ratio (ν), internal damping (Q⁻¹ or tan δ) |
| Compliance | ASTM E1876, ISO 12680, DIN 51045-1, applicable to GLP/GMP environments with audit trail enabled in RFDA MF Software |
| Brand | MATHIS |
|---|---|
| Origin | Canada |
| Model | TC-30 |
| Measurement Principle | Transient Plane Source (TPS) or Modified Transient Hot Wire (THW) |
| Sample Measurement Time | 1–60 s |
| Inter-Test Interval | 0–10 min (typ. 2 min) |
| Operating Temperature Range | –20 °C to +60 °C (external sensor) |
| Compliance | Designed for GLP/QC environments |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | 2/3 Column |
| Density Range | 0.8–3.3 g/cm³ (dependent on selected gradient liquid mixture and calibrated sinkers) |
| Accuracy | ±0.0001 g/cm³ at 23.0 ± 0.1 °C |
| Temperature Control | Digital, 5–50 °C ±0.1 °C |
| Bath Volume | ~45 L (transparent acrylic) |
| Cooling | External coil heat exchanger |
| Agitation | Integrated circulation pump |
| Sample Handling | Motorized lift system for sinkers and specimens |
| Gradient Column | Calibrated glass tube, 850 mm total length |
| Accessories | Precision column filling system, NIST-traceable calibrated sinkers |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Model | DE MATTIA FLEXING APPARATUS |
| Test Frequency | 300 ± 10 cycles/min |
| Maximum Deflection | 100 mm |
| Operating Temperature Range (Standard) | Ambient |
| Optional Low-Temp Version | –40 °C |
| Optional High-Temp Version | +120 °C |
| Compliance | ASTM D813 |
| Sample Preparation | Integrated notching tool included |
| Brand | IMCE |
|---|---|
| Model | HTVP1600/1700C (HT1050/1600/1700) |
| Operating Temperature Range | Ambient to 1600 °C / 1700 °C |
| Temperature Stability | ±1 °C |
| Heating Rate | 0.1–20.0 °C/min |
| Resonance Frequency Range | 10 Hz–150 kHz (±0.5 Hz) |
| Damping/Internal Friction Measurement Range | 1×10⁻⁵–0.1 |
| Elastic Modulus Accuracy | <0.1% at RT, <5% at elevated temperature |
| Elastic Modulus Range | 10 MPa–880 GPa |
| Shear Modulus & Poisson’s Ratio | Calculated from resonance spectra |
| Atmosphere Control | Inert, oxidizing, reducing, vacuum-compatible |
| Detection Method | Non-contact laser Doppler vibrometry |
| Compliance | ASTM E1876, ASTM C1259 |
| Brand | IMCE |
|---|---|
| Origin | Belgium |
| Model | LT80 |
| Operating Temperature Range | 77 K to 473 K (Liquid Nitrogen–Free) |
| Cooling Method | Closed-Cycle Mechanical Cryocooler |
| Price | €100,000 |
| Brand | IMCE |
|---|---|
| Origin | Belgium |
| Model | HT1600-DS |
| Sample Capacity | 2 simultaneous specimens |
| Operating Temperature Range | Up to 1600 °C |
| Optional Vertical Dilatometer Integration | Yes |
| Compliance | ASTM E1876, ISO 12680, DIN 51045 |
Show next