- All
- Favorite
- Popular
- Most rated
| Brand | IMCE |
|---|---|
| Model | HTVP1600C |
| Measurement Principle | Resonant Frequency Method |
| Frequency Range | 1–100 kHz |
| Damping Factor (tan δ) | 1×10⁻⁵ to 0.1 |
| Temperature Range | Ambient to 1600 °C |
| Atmosphere Control | Yes |
| Compliance | ASTM E1876-99 |
| Output Parameters | Young’s Modulus, Shear Modulus, Poisson’s Ratio, Internal Friction (Q⁻¹) |
| Brand | Galdabini |
|---|---|
| Origin | Italy |
| Model | Impact25 |
| Maximum Impact Energy | 25 J |
| Test Configurations | Charpy (simply supported beam), Izod (cantilever beam), and Tensile Impact |
| Compliant Standards | ASTM D256, ASTM D6110, ISO 180, ISO 179, DIN 53438, EN ISO 8256, JIS K7111 |
| Control System | Microprocessor-based with automatic friction compensation |
| Data Interface | RS-232 serial port |
| Software Support | GraphWork data analysis suite |
| Certification | Manufactured in accordance with ISO 9001 quality management system |
| Brand | IMCE |
|---|---|
| Model | HTVP650C |
| Measurement Principle | Impulse Excitation Technique (IET) / Resonance Frequency Analysis |
| Frequency Range | 1–100 kHz |
| Elastic Modulus Accuracy | < ±0.1% |
| Repeatability | < ±0.2% |
| Damping Resolution | down to 1×10⁻⁵ |
| Sample Dimensions | Length 20–300 mm, Width 2–130 mm |
| Maximum Operating Temperature | 650 °C (upgradable to 1100 °C) |
| Compliance | ASTM C1259, ASTM E1187 |
| Software | Integrated IET data acquisition & analysis suite with temperature correlation module |
| Excitation | Automated electromagnetic impulse system |
| Data Output | Young’s modulus (E), Shear modulus (G), Poisson’s ratio (ν), Resonant frequencies (f₁, f₂, …), Internal friction (Q⁻¹) |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 29/53 |
| Pricing | Upon Request |
| Brand | NOSELAB ATS |
|---|---|
| Origin | Italy |
| Model | IMPats 15/25/50 |
| Impact Energy Range | 0–15 J, 0–25 J, 0–50 J |
| Impact Velocity | 2.9 m/s, 3.46 m/s, 3.8 m/s (model-dependent) |
| Pendulum Moment (Impact Constant) | Calibrated per energy range |
| Load Cell Range | Matched to nominal impact energy (0–15 J / 0–25 J / 0–50 J) |
| Maximum Lifting Height | Compliant with ISO 179, ISO 180, ASTM D256, ASTM E23, DIN 53438, UNI EN ISO 13802 |
| Brand | IMCE |
|---|---|
| Model | RFDA MF Professional |
| Origin | Belgium |
| Application | Non-destructive dynamic mechanical characterization of ceramics, metals, and advanced materials |
| Temperature Range | Ambient to 1750 °C |
| Atmosphere Control | Yes |
| Damping Measurement Range | 1×10⁻⁵ to 0.1 (dimensionless) |
| Measured Parameters | Resonant frequency, elastic modulus (E), shear modulus (G), Poisson’s ratio (ν), internal damping (Q⁻¹ or tan δ) |
| Compliance | ASTM E1876, ISO 12680, DIN 51045-1, applicable to GLP/GMP environments with audit trail enabled in RFDA MF Software |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Model | DE MATTIA FLEXING APPARATUS |
| Test Frequency | 300 ± 10 cycles/min |
| Maximum Deflection | 100 mm |
| Operating Temperature Range (Standard) | Ambient |
| Optional Low-Temp Version | –40 °C |
| Optional High-Temp Version | +120 °C |
| Compliance | ASTM D813 |
| Sample Preparation | Integrated notching tool included |
| Brand | IMCE |
|---|---|
| Model | HTVP1600/1700C (HT1050/1600/1700) |
| Operating Temperature Range | Ambient to 1600 °C / 1700 °C |
| Temperature Stability | ±1 °C |
| Heating Rate | 0.1–20.0 °C/min |
| Resonance Frequency Range | 10 Hz–150 kHz (±0.5 Hz) |
| Damping/Internal Friction Measurement Range | 1×10⁻⁵–0.1 |
| Elastic Modulus Accuracy | <0.1% at RT, <5% at elevated temperature |
| Elastic Modulus Range | 10 MPa–880 GPa |
| Shear Modulus & Poisson’s Ratio | Calculated from resonance spectra |
| Atmosphere Control | Inert, oxidizing, reducing, vacuum-compatible |
| Detection Method | Non-contact laser Doppler vibrometry |
| Compliance | ASTM E1876, ASTM C1259 |
| Brand | IMCE |
|---|---|
| Origin | Belgium |
| Model | LT80 |
| Operating Temperature Range | 77 K to 473 K (Liquid Nitrogen–Free) |
| Cooling Method | Closed-Cycle Mechanical Cryocooler |
| Price | €100,000 |
| Brand | IMCE |
|---|---|
| Origin | Belgium |
| Model | HT1600-DS |
| Sample Capacity | 2 simultaneous specimens |
| Operating Temperature Range | Up to 1600 °C |
| Optional Vertical Dilatometer Integration | Yes |
| Compliance | ASTM E1876, ISO 12680, DIN 51045 |
Show next