- All
- Favorite
- Popular
- Most rated
| Brand | Chemplex |
|---|---|
| Origin | USA |
| Model | 4312 |
| Type | Manual Hydraulic Pellet Press |
| Maximum Force | 12 tons (107 kN) |
| Compliance | ASTM E1985, ISO 13908, USP <1059> for Solid Dosage Form Preparation |
| Construction | High-strength steel frame with precision-machined hardened steel platens |
| Platen Diameter | 32 mm (standard), compatible with 13 mm, 25 mm, and 32 mm die sets |
| Pressure Display | Analog gauge with dual-scale (tons / MPa) calibration traceable to NIST standards |
| Weight | 42 kg |
| Footprint | 220 × 180 × 480 mm (W × D × H) |
| Brand | Carver |
|---|---|
| Origin | USA |
| Model | 43860 |
| Type | Semi-Automatic Heated Pellet Press |
| Maximum Force | 12 tons (24,000 lbf) |
| Platen Spacing Range | 0–15 in (0–381 mm) |
| Hydraulic Ram Stroke | 5.125 in (130 mm) |
| Platen Size | 6 × 6 in (152.4 × 152.4 mm) |
| Heating Power per Platen | 700 W |
| Max Temperature | 650 °F (343 °C) |
| Temperature Control | Digital PID Controller per Platen |
| Operating Voltage | 240 V AC, 6 A Full Load |
| Dimensions (W×D×H) | 22 × 16 × 39 in (55.9 × 40.6 × 99.1 cm) |
| Net Weight | 300 lb (136 kg) |
| Safety Features | Interlocked Gray Safety Shield, Electronic Emergency Power Cut-off (Fuseless) |
| Brand | CARVER |
|---|---|
| Origin | USA |
| Model | 4350 |
| Type | Manual Pellet Press |
| Maximum Force | 12 tons (24,000 lbf) |
| Platen Diameter | 10.16 cm |
| Die Cavity Compatibility | 13 mm |
| Ram Stroke | 13 cm |
| Jaw Opening Range | 0–13.97 cm |
| Pressure Gauge Range | 0–24,000 psi |
| Dimensions (L×W×H) | 26×20×51 cm |
| Net Weight | 57.5 kg |
| Base Color | Dark Gray |
| Brand | Carver |
|---|---|
| Origin | USA |
| Model | 38874387 |
| Type | Fully Automatic Hydraulic Pellet Press |
| Maximum Pressure | 25 tons (3887) / 40 tons (4387) |
| Platen Diameter | 5 in |
| Platen Travel | 1 in |
| Platen Spacing Range | 1.5–7.25 in |
| Standard Die Sizes | 13 mm (25-ton), 31 mm (40-ton) |
| Optional Die Size | 40 mm |
| Base Dimensions | 32×20 in (3887) / 34×22.75 in (4387) |
| Height | 22 in (3887) / 26 in (4387) |
| Weight | 400 lb (3887) / 500 lb (4387) |
| Control System | SD microprocessor (standard), PD programmable controller (upgraded) |
| Brand | Carver |
|---|---|
| Origin | USA |
| Model | 4128 |
| Maximum Working Pressure | 30 tons (267 kN) |
| Maximum Temperature | 343 °F (173 °C) |
| Platen Dimensions | 12 in × 12 in (305 mm × 305 mm) |
| Platen Stroke | 6 in (152 mm) |
| Base Footprint | 32 in × 27 in (813 mm × 686 mm) |
| Type | C-frame Hydraulic Press |
| Compliance | ASTM E10, ASTM E384, ISO 20501, USP <1059>, GLP-ready architecture |
| Brand | Chemplex |
|---|---|
| Origin | USA |
| Model | 4325 |
| Pressing Force | 30 tons (267 kN) |
| Die Set Options | 32 mm, 35 mm, 40 mm, or 45 mm (Part Nos. 4030, 4038, 4040, 4047) |
| Type | Fully Automatic Pellet Press for X-ray Fluorescence (XRF) Sample Preparation |
| Brand | Carver |
|---|---|
| Origin | USA |
| Model | 4386 CH |
| Type | Manual Hydraulic Pellet Press |
| Maximum Pressure | 12 tons (24,000 lbf) |
| Heating Capability | Electrically heated platens up to 343 °C |
| Platen Size | 6 in × 6 in |
| Platen Spacing | 0–15 in |
| Brand | Carver |
|---|---|
| Origin | USA |
| Model | 3710H |
| Type | Fully Automated Heated Hydraulic Pellet Press |
| Max Pressure | 30 tons |
| Platen Size | 15 in × 15 in |
| Platen Spacing Range | 6–12 in |
| Platen Stroke | 6 in |
| Column Diameter | 1.25 in |
| Base Dimensions | 42 in × 40 in |
| Height | 72 in |
| Weight | 1,850 lb |
| Operating Temperatures | 260 °C / 426 °C / 649 °C |
| Optional Accessories | Electrically Heated Platens, Programmable Logic Controller (PLC), Low-Pressure Operation Kit, Adjustable Compression Rate Module, Integrated Auto-Cooling System |
| Brand | Carver |
|---|---|
| Origin | USA |
| Type | Manual Hydraulic Pellet Press |
| Pressure Capacity | 12–30 tons (24,000–60,000 lbf) |
| Frame Configuration | Dual-Post or Four-Post |
| Platen Dimensions | 4" round to 12"×12" |
| Platen Travel | 5.1–6.5 in |
| Adjustable Platen Gap | 0.75–18 in |
| Construction | Cast iron and hardened steel |
| Mold compatibility | 13 mm, 31 mm, and 40 mm diameter dies |
Show next