- All
- Favorite
- Popular
- Most rated
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 480/490 |
| Price | Upon Request |
| Power Range | 4.44 kW to 56,800 kW |
| Torque Range | 2.8 N·m to 452,000 N·m |
| Speed Accuracy (end-point) | ±0.01% FS |
| Combined Accuracy (Power/Torque) | ±0.08% FS |
| Temperature Compensation Range | +75 °F to +175 °F |
| Analog Output Options | ±5 V or ±10 V dc (user-selectable) |
| Digital Interface | RS232 with full unit-aware data streaming |
| Frequency Response | 0–2 kHz |
| System Resolution | 0.02% FS (14-bit equivalent with 50% overrange) |
| EMI Hardening | IGBT-drive compatible |
| Filter Options | 11 Bessel-type cutoff settings (0.1–200 Hz, 1–2–5 decade steps) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 590 |
| Pricing | Available Upon Request |
| Measurement Range | 4.52 N·m to 83,000 N·m |
| Output Signals | ±5 V DC, 4–20 mA, mV/V |
| Frequency Response | 0–500 Hz |
| Power Supply | 10.5–24 V DC (nominal 12 V DC battery compatible) |
| Accuracy (combined nonlinearity/hysteresis/nonrepeatability) | ≤±0.10 % FS |
| Thermal Zero Drift | ≤±0.0025 % FS/°F |
| Thermal Span Drift | ≤±0.0025 % RDG/°F |
| Compensated Temperature Range | +75 to +175 °F |
| Operating Temperature Range | −25 to +185 °F |
| Storage Temperature Range | −65 to +225 °F |
| Overrange Capability | ±33 % FS |
| Bandwidth Options | DC–500 Hz (high-frequency mode), DC–1 Hz (low-frequency mode) |
| Intrinsic Safety Certification | Compliant with IEC 60079-11 (Ed. 5.0) and UL 913 Class I, Div 1, Groups A, B, C, D |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Numbers | 487, 497, 597 |
| Pricing | Available Upon Request |
| Torque Range | 2.83 N·m to 452,000 N·m (25 to 4,000,000 lb·in) |
| Accuracy | ±0.05% FS (Torque Analog Output) |
| Output | Engineering-Unit Digital via RS-232/RS-485 Serial Port |
| Signal Filtering | 11 Selectable Constant-Delay Low-Pass Filters |
| Overload Capacity | 200%, 400%, and 1,000% of Full Scale |
| Noise & Ripple | ≤0.02% FS |
| EMI Hardening | Optimized for Variable Frequency Drive (VFD) Environments |
| Calibration | Remote, Bidirectional, NIST-Traceable |
| Software | PC-Based Interface with Support for 33 Engineering Units (No Recalibration Required) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 482 |
| Quotation | Available upon Request |
| Torque Range | 2.83 N·m to 1130 N·m |
| Analog Output | ±5 V DC or ±10 V DC (user-selectable) |
| Digital Interface | RS232C |
| Combined Accuracy (nonlinearity + hysteresis + nonrepeatability) | ±0.2% FS (Code N) / ±0.15% FS (Code C) |
| Rotational Effect on Zero | ±0.05% FS (Code N) / ±0.025% FS (Code C) |
| Thermal Zero Drift | ±0.007% FS/°F (Code N) / ±0.003% FS/°F (Code C) |
| Thermal Span Drift | ±0.007% reading/°F (Code N) / ±0.003% reading/°F (Code C) |
| Temperature Compensation Range | +75 to +150 °F |
| Operating Temperature Range | +32 to +175 °F |
| Nominal Overrange Capacity | 30% FS |
| Bessel Filter Cutoff Frequencies | 0.1–200 Hz (11 steps: 1–2–5 sequence) |
| System Resolution | 0.02% FS (±10 V) / 0.04% FS (±5 V) |
| Supply Voltage | 10–15 V DC @ 200 mA nominal |
Show next