Generic
Filter
Showing 3661–3690 of 5744 results
| Origin | United Kingdom |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | PP-4 |
| Pricing | Available Upon Request |
| Key | Max Test Load: 80 kN |
|---|---|
| Test Frequency Range | 0–5 Hz |
| Frequency Accuracy | ±1% |
| Stroke Amplitude | 0–160 mm |
| Static Load Accuracy | ±0.5% |
| Position Resolution | ±0.1 mm |
| Cylinder Thrust Range | 0–8,000 kgf |
| Speed Range | 0.2–200 mm/min |
| Max Specimen OD | 600 mm |
| Max Specimen Height | 500 mm |
| Power Supply | AC 380 V, 100 kW |
| Waveform Options | Sine, Ramp, Square |
| Compliance Standard | GB/T 13061 |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PRE-2000 |
| Application Level | Industrial-Scale Preparative |
| Instrument Type | High-Pressure Preparative LC |
| Flow Rate Range | 0.1–100 mL/min |
| Flow Accuracy | ±1.0% |
| Flow Precision | ≤0.2% RSD |
| Flow Reproducibility | ≤0.2% RSD |
| Maximum Pressure | 5000 psi |
| Wavelength Range | 190–800 nm (±1 nm) |
| Wavelength Reproducibility | ±0.1 nm |
| Baseline Noise | ≤0.15 × 10⁻⁵ AU |
| Data Acquisition Rate | 100 Hz |
| Pump Configuration | Dual Isocratic or Gradient Capable |
| Gradient Composition Range | 0–100% B |
| Auto-Cleaning Pump Head | Integrated |
| Maintenance Interval | ≥6 months under continuous operation |
| Key | Temperature Range: +100°C to +147°C (saturated steam temperature) |
|---|---|
| Humidity Range | 75–100% RH (saturated steam, up to 75% RH at 47°C) |
| Humidity Stability | ±3% RH |
| Operating Pressure | 1.2–2.89 kgf/cm² (inclusive of 1 atm ambient) |
| Time Setting Range | 0–999 hours |
| Pressurization Time | ~45 min to reach 1.04 kgf/cm² from ambient |
| Temperature Uniformity | ±0.5°C |
| Temperature Display Resolution | 0.1°C |
| Pressure Uniformity | ±0.1 kgf/cm² |
| Humidity Uniformity | ±3% RH |
| Internal Chamber Design Pressure Rating | 4.0 kgf/cm² |
| Vacuum Pre-Purge Function | Integrated |
| Safety Interlock | Dual-redundant pressure/temperature-sensing door lock |
| Water Autonomy | Up to 48 h continuous operation per fill (optional fully automated water replenishment system) |
| Weighing Range | 225 g |
|---|---|
| Readability | 0.1 mg |
| Taring Range | 225 g |
| Reproducibility | ≤ 0.1 mg |
| Linearity Error | ±1 mg |
| Response Time | ~2–3 s |
| Stability Setting | 3-step adjustable |
| Operating Temperature | 0–40 °C |
| Sensitivity Drift (10–30 °C) | ±2 ppm/°C |
| Input Voltage | 115/230 V AC |
| Voltage Tolerance | +15 % / −20 % |
| Frequency | 50–60 Hz |
| Power Consumption | 6 VA |
| Display | Fluorescent (optional) |
| Dimensions (L×W×H) | 210 × 340 × 89 mm |
| Pan Diameter | Ø80 mm (chromium-nickel steel) |
| Net Weight | 3.7 kg |
| Internal Calibration | Motor-driven SCS system with built-in precision weights |
| Compliance | ISO 9001, ISO/IEC 17025 compatible workflows, GLP/GMP-ready audit trail support |
| Origin | Switzerland |
|---|---|
| Manufacturer | Precisa Instruments AG |
| Model | XS4250C |
| Weighing Range | 4250 g |
| Readability | 10 mg |
| Taring Range | 4250 g |
| Reproducibility | ≤10 mg |
| Linearity Error | ±15 mg |
| Stabilization Time | 2–3 s |
| Stability Setting | 3-step adjustable |
| Operating Temperature | 0–40 °C |
| Sensitivity Drift (10–30 °C) | ±2 ppm/°C |
| Supply Voltage | 115/230 V AC |
| Voltage Tolerance | +15% / −20% |
| Frequency | 50–60 Hz |
| Power Consumption | 6 VA |
| Display | Optional fluorescent display |
| Dimensions (L×W×H) | 210 × 340 × 89 mm |
| Pan Material | Chrome-nickel steel |
| Pan Size | 170 × 170 mm |
| Net Weight | 4.5 kg |
| Origin | Canada |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NanoAssemblr Spark |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Range | Multiple Standardized Sizes |
| Pricing | Available Upon Request |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Distributor |
| Product Origin | Domestic (China) |
| Model | JJ-1 |
| Power Options | 25W–300W |
| Timing Range | 0–120 min |
| Speed Range | 0–3000 rpm |
| Speed Control | Continuous (infinitely variable) |
| Display | Optional digital speed readout (JJ-1A, JJ-4A) |
| Temperature Control | Integrated digital heating (JJ-3, up to 200 °C) |
| Multi-station Configuration | 6-position synchronized/individual control (JJ-4, JJ-4A) |
| Key | Temperature Range: +110 °C to +132 °C |
|---|---|
| Temp. Uniformity | ±1.5 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Range | 75–100 % RH (saturated steam) |
| Humidity Uniformity | ±3.0 % RH |
| Humidity Stability | ±1.5 % RH |
| Pressure Range | 0–2 kg/cm² (configurable up to 4 kg/cm²) |
| Max. Safety Pressure | 4 kg/cm² |
| Vacuum Preconditioning | Integrated particulate-filtered air intake (<1 µm) |
| Test Duration | 0–999 h |
| Steam Circulation | Natural convection |
| Water Consumption | Low—supports continuous operation up to 200 h per fill |
| Compliance | GB/T 10586–1989, GB/T 2423.3–1993 (IEC 60068-2-3), MIL-STD-810D Method 502.2, GJB 150.9–1986, GB/T 2423.34–1986, MIL-STD-883C Method 1004.2 |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 630297 / 630299 |
| Pricing | Available Upon Request |
| Tubing Length (630297) | 25.4 cm (10 in) |
| Tubing Length (630299) | 76.2 cm (30 in) |
| Connection Type | One Male Luer Lock + One Female Luer Lock |
| Maximum Pressure Rating | 1000 psi |
| Key | Chamber Dimensions (W×D×H): 800×800×800 mm or 1000×1000×1000 mm |
|---|---|
| Rated Voltage | 220 V ±10%, 50 Hz |
| Sample Rack Height Adjustment Range | 0–750 mm |
| Timer Range | 0–99 h 59 min |
| Timer Accuracy | ±1 min |
| Cycle Control (Load/Blow) | 0–99 h 59 min / 1 s–9999 min |
| Dust Concentration | 2–4 kg/m³ (dry talcum powder) |
| Powder Specification | Passes 75 µm square mesh sieve (wire diameter 50 µm) |
| Internal Construction | SUS201 stainless steel chamber |
| External Casing | A3 steel with electrostatic powder coating |
| Ambient Operating Conditions | 15–35 °C, 45–75 %RH (uncontrolled |
| Control System | PLC-based HMI touchscreen controller with PT100 temperature sensors |
| Safety Protections | Overtemperature cutoff, phase-loss detection, earth-leakage circuit breaker, reinforced tempered glass viewport (800×800 mm or 1000×1000 mm) |
| Airflow Design | Non-laminar, vertically oriented recirculating duct system |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Prime |
| Price Range | USD 135,000 – 205,000 |
| Instrument Type | Atomic Force Microscope (AFM)-Based Scanning Microwave Impedance Microscope |
| Positional Detection Noise | 0.01 nm |
| Scan Area | 20 µm × 20 µm (model-dependent) |
| Stage Travel Range | 100 µm × 100 µm × 10 µm |
| Key | Capacity Range: 80–1000 L |
|---|---|
| Temperature Range | −70 °C to +150 °C (configurable models) |
| Humidity Range | 5–98 %RH (standard: 20–98 %RH) |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±2.5 %RH |
| Temp. Stability | ±2 °C |
| RH Stability | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | +4.0 °C/min (heat-up), −1.0 °C/min (cool-down) |
| Refrigeration | Hermetic dual-stage compressor with R404A/R23 eco-refrigerant |
| Controller | Touchscreen LCD with bilingual (EN/CN) interface |
| Construction | SUS304 stainless steel interior & exterior |
| Compliance | MIL-STD-810G, IEC 60068-2-1 (Cold), -2-2 (Dry Heat), -2-30 (Damp Heat Cycle), GB/T 2423.1–2423.4, GJB 150.3–150.4 |
| Key | Temperature Range: –40 °C to +150 °C (standard) |
|---|---|
| Humidity Range | 30–98% RH (standard) |
| Temperature Resolution | 0.01 °C |
| Humidity Resolution | 0.1% RH |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤±2 °C |
| Humidity Deviation | ≤±2.5% RH |
| Heating Rate | 2.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Control System | TEMI880 color LCD touchscreen programmable controller |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G (customizable to 220 V) |
| Interior Material | SUS304 stainless steel |
| Exterior Material | SUS304 stainless steel or A3 steel with electrostatic powder coating |
| Key | Temperature Range: −40 °C to +150 °C (optional down to −120 °C) |
|---|---|
| Humidity Range | 30–98% RH (optional 5–98% RH) |
| Temp. Resolution | 0.01 °C |
| Humidity Resolution | 0.1% RH |
| Temp. Uniformity | ±2 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Uniformity | ±2.5% RH |
| Heating Rate | 2.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Controller | TEMI880 color LCD touchscreen programmable system |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G (220 V optional) |
| Interior Material | SUS304 stainless steel |
| Exterior Material | SUS304 stainless steel or A3 steel with electrostatic powder coating |
| Key | Internal Dimensions: 400 × 400 × 500 mm (L×W×H) |
|---|---|
| Temperature Range | −40 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temp. Stability | ±0.5 °C |
| Humidity Stability | ±2.5 %RH |
| Temp. Uniformity | ±1.0 °C |
| Humidity Uniformity | ±3.0 %RH |
| Heating Rate | +20 °C to +150 °C in ≈30 min |
| Cooling Rate | +20 °C to −40 °C in ≈50 min |
| Controller | TEMI880 Touchscreen HMI (Bilingual English/Chinese) |
| Refrigeration System | Hermetic Compressor, R404A/R23 Refrigerants |
| Air Circulation | Multi-wing Centrifugal Fan (Oriental Motor), Horizontal Diffusion + Vertical Thermal Exchange |
| Water Supply | Integrated 25 L Stainless Steel Reservoir with Auto-Replenishment & Low-Water Alarm |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Protec® P3000 |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Protec® P3000XL |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | Ultra-Micro / Micro / Macro ProtipTM |
| Pricing | Available Upon Request |
| Origin | Spain |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Olser |
| Pricing | Upon Request |
| Core Configuration | Solid-State Laser System (Diode-Pumped Nd:YAG/Nd:YLF) |
| Origin | Spain |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | VILSER |
| Price | Upon Request |
| Core Components | Solid-State Laser System and Associated Equipment |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PRS-14 |
| Temperature Range | 0–100 °C |
| Temperature Accuracy | ±1 °C |
| Heating Time to 100 °C | ≤1 min |
| Platform Motion | Orbital, 25 mm Diameter |
| Speed Range | 100–1,200 rpm |
| Speed Accuracy | ±2 rpm |
| Platform Size | 260 × 240 mm |
| Max Load Capacity | 3 kg |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Safety Certifications | CE, RoHS, IEC 61010-1 |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PRS-22 |
| Pricing | Available Upon Request |
| Origin | United Kingdom |
|---|---|
| Import Category | Imported |
| Model | PRS-5-12 |
| Instrument Type | Rocking (Tilting) Oscillator |
| Timer Range | 1–999 min (digital programmable) |
| Oscillation Frequency | 0–80 rpm (adjustable, ±0.5 rpm repeatability) |
| Rocking Angle | 0–20° (continuously adjustable, calibrated scale) |
| Operating Temperature Range | Ambient to 40 °C (optional ambient-temperature-only configuration) |
| Platform Quantity | Single-tier stainless steel platform (300 × 250 mm, load capacity ≤ 5 kg) |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PRSC-22 |
| Instrument Type | Orbital Platform Shaker |
| Timer Range | Programmable (0–999 min) |
| Oscillation Frequency | 20–200 rpm |
| Orbit Diameter | 18 mm, 28 mm, and 36 mm selectable |
| Temperature Range | 0–99 °C (with integrated Peltier heating/cooling module) |
| Platform Count | Single platform |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | PS2000 |
| Pricing | Available Upon Request |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PSC18 |
| Pricing | Upon Request |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PSC96 |
| Temperature Range | 0–100 °C |
| Temperature Accuracy | ±1 °C |
| Heating Time to 100 °C | ≤1 min |
| Block Configuration | 96-well compatible aluminum heating block |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PSEL VGA / PSEL qVGA |
| Price Range | USD 6,800 – 13,600 (FOB) |
| Effective Pixels | 640 × 512 (VGA), 320 × 256 (qVGA) |
| Pixel Pitch | 15 µm (VGA), 30 µm (qVGA) |
| Spectral Response | 900–1700 nm |
| Frame Rate | up to 174 fps (full VGA), 570 fps (quarter VGA), 7200 fps (line-scan or spectral mode) |
| Read Noise | 28–38 e⁻ (high-gain, VGA), 110–200 e⁻ (high-gain, qVGA) |
| Dark Current | <0.7 fA (air-cooled, VGA), <0.1 fA (water-cooled, VGA) |
| Cooling | −25°C (air), −40°C (water) |
| Full Well Capacity | 20–23 ke⁻ (high-gain VGA), 110–150 ke⁻ (high-gain qVGA) |
| A/D Conversion | 14-bit digitization, 16-bit image processing |
| Exposure Time | 30 µs – 60 s (VGA), 1 µs – 1 s (qVGA) |
| Quantum Efficiency @ 1500 nm | 80% |
| Interface | GigE Vision & Camera Link (base configuration) |
| SDK | C/C++, Python, MATLAB, LabVIEW VI included |
| Compliance | CE, RoHS, ISO 9001 manufacturing traceability |