PhyMetrix
Filter
Showing all 8 results
| Brand | PhyMetrix |
|---|---|
| Origin | USA |
| Model | DC1000 |
| Output Pressure | 0.3 MPa (recommended) |
| Dew Point | < −80 °C (dp) |
| Inlet Pressure | ≥ 0.8 MPa |
| Operating Temperature | 5–40 °C |
| Storage Temperature | −40–50 °C |
| Electrical Supply | AC 220 V ±10%, 50 Hz |
| Dimensions | 485 × 500 × 260 mm (W × D × H) |
| Weight | 20 kg |
| Inlet/Outlet Fitting | 1/4" Swagelok |
| Brand | PhyMetrix |
|---|---|
| Model | DPT-600 |
| Type | Portable/Tabletop Dew Point Meter |
| Measurement Principle | Capacitive Nanoporous Metal Oxide Sensor |
| Dew Point Range | −110 °C to +20 °C |
| Accuracy | ±2 °C |
| Repeatability | ±0.8 °C |
| Response Time (95% step) | 3 min |
| Operating Temperature | −20 °C to +60 °C |
| Gas Flow Rate | >1 L/min |
| Temperature Sensor Range | −40 °C to +70 °C |
| Pressure Sensor Option | 0–150 PSIA (10 bar), ±1% FS |
| Enclosure Rating | IP67/IP68 |
| Dimensions | 199 × 162 × 84 mm (L×W×H) |
| Weight | 1.6 kg |
| Power | Rechargeable Li-ion battery or 100–240 VAC adapter via USB Mini-B |
| Data Logging Capacity | >4,000 records (dew point, temperature, pressure) |
| Display | Backlit graphical LCD with auto-scaling bar chart |
| Interface | USB Mini-B (sealed cap), optional 4–20 mA (HART), optional ATEX-certified intrinsically safe version |
| Brand | PhyMetrix |
|---|---|
| Origin | USA |
| Model | DPT-830 |
| Product Type | Online Dew Point Analyzer |
| Measurement Principle | Capacitive Metal Oxide Thin-Film Sensor (Nanoporous Al₂O₃-based) |
| Operating Temperature Range | 0 °C to +45 °C |
| Dew Point Range | −110 °C to +20 °C |
| Accuracy | ±2 °C |
| Repeatability | ±0.8 °C |
| Response Time (T90) | < 3 min |
| Minimum Flow Rate | > 3 SCFH |
| Output Signals | 4–20 mA (user-configurable range), RS232 (configuration & data access), RS485 (Modbus RTU), Optional 433 MHz RF Wireless |
| Relay Outputs | 2 × 10 A / 240 V AC, fully user-configurable |
| Data Logging | Optional |
| Calibration Traceability | NIST-traceable |
| Safety Certification | Optional Intrinsically Safe (IS) Rating |
| Probe Configuration | Optional Remote-Mount Sensor Head |
| Brand | PhyMetrix |
|---|---|
| Origin | USA |
| Model | DPT-900 |
| Product Type | Online Dew Point Analyzer |
| Measurement Principle | Electrolytic (P2O5 Sensor) |
| Operating Temperature | -20 °C to +60 °C |
| Accuracy | ±2 °C |
| Repeatability | ±0.5 °C |
| Dew Point Range | -110 °C to +20 °C |
| Response Time | ≤3 min (to 95% of step change, dry-to-wet) |
| Gas Flow Rate | >1 L/min |
| IP Rating | IP66/IP68 |
| Hazardous Area Certifications | FM/CSA Class I Div 1 Groups B, C, D |
| ATEX/IECEx | Ex d IIC T6 Gb |
| Enclosure Material | Aluminum (standard), optional 316L stainless steel |
| Dimensions | 226 × 147 × 147 mm (L×W×H) |
| Weight | 2.5 kg |
| Brand | PhyMetrix |
|---|---|
| Origin | USA |
| Model | PGA500-Ex |
| Measurement Principle | Electrochemical Sensor |
| Range Options | 0–10 ppm, 0–100 ppm, 0–1,000 ppm, 0–1% O₂ (auto-ranging) |
| Resolution | 0.01 ppmv |
| Accuracy | ≤ ±2% FS |
| Repeatability | ±1% FS |
| Response Time (T90) | <180 s (10,000 → 1,000 ppm) |
| Operating Temperature | −20 to +60 °C |
| IP Rating | IP65 |
| Ingress Pressure | Max. 1 bar (gauge) |
| Sample Flow Rate | >1 NL/min |
| Display | 3.5″ color LCD |
| Power Supply | 176–264 VAC / 47–63 Hz or 15–28 VDC |
| Power Consumption | 5 W |
| Output Signals | 4–20 mA (HART-enabled), 0–20 mA, 0–24 mA (Rₗ < 500 Ω) |
| Alarm Outputs | 2 × programmable SPDT relays (250 VAC/5 A, 30 VDC/5 A, resistive load) |
| Communication | RS-485, Modbus RTU |
| Enclosure Certification | Ex d IIC T4 |
| Dimensions | 355 × 224 × 172 mm (H × W × D) |
| Weight | 10.95 kg |
| Inlet/Outlet Fitting | 316 stainless steel 1/4″ compression |
| Brand | PhyMetrix |
|---|---|
| Origin | USA |
| Model | PGA520 |
| Instrument Type | Online Analyzer |
| Detection Target | Single-component (CO₂) |
| Repeatability | ≤ ±1% F.S. |
| Resolution | 0.1 ppm or 0.01% |
| Response Time | T90 ≈ 0.15 s (@ 1 SCFH) |
| Linearity Error | ≤ ±2% F.S. (excluding calibration gas uncertainty) |
| Measurement Ranges | 0–5000 ppm, 0–5%, 0–20%, 0–100% CO₂ (field-selectable) |
| Minimum Resolution | 0.01 ppm or 0.01% |
| Warm-up Time | <2 min (to operational readiness) |
| Operating Temperature | 0–40 °C with full-range temperature compensation |
| Power Supply | 110–220 VAC or 12–36 VDC |
| Dimensions | 200 mm (H) × 80 mm (W) × 102 mm (D) |
| Weight | 1.5 kg |
| Inlet/Outlet Fitting | 1/4" compression fitting (male thread) |
| Enclosure Rating | IP67 |
| Brand | PhyMetrix |
|---|---|
| Origin | USA |
| Model | POA200 |
| Sensor Type | Electrochemical |
| Measurement Accuracy | ±1% FS (@20°C) |
| Response Time | <10 s (100 ppm–1%), <25 s (0–10 ppm) |
| Resolution | 0.01 ppm |
| Operating Temperature Range | 0–45°C (32–113°F) |
| Sample Pressure | 5–30 psig |
| Flow Rate | 0.2–2.0 SCFH |
| Display | Backlit graphical LCD with auto-scaling trend plot |
| Data Storage | >10,000 records (O₂, temperature, pressure) |
| Power | Rechargeable Li-ion battery (USB/AC adapter charging), intrinsic safety certified |
| Enclosure Rating | IP67/IP68 |
| Hazardous Area Certification | Class I, Div. 1, Groups A, B, C, D |
| Dimensions | 142 × 185 × 140 mm (L×W×H) |
| Weight | 2.45 kg |
| Internal Wetted Materials | 316 stainless steel |
| Inlet/Outlet Fitting | 1/8" Swagelok® compression (optional) |
| Calibration | Dual-mode (auto/manual), traceable to NIST-certified 80% O₂ standard gas |
| Brand | PhyMetrix |
|---|---|
| Origin | USA |
| Model | POA3500 |
| Sensor Type | Paramagnetic |
| Measurement Range | 0–100% O₂ |
| Accuracy | <±0.1% FS |
| Repeatability | <±0.1% FS |
| Resolution | 0.01% O₂ |
| Response Time (T90) | <15 s |
| Zero Drift | <±0.1% FS/week |
| Span Drift | <±0.15% FS/week |
| Operating Temperature | −20 to +40 °C |
| Sample Pressure | 1–10 psig |
| Sample Flow Rate | 1–2 L/min |
| Display | 5″ LCD Touchscreen |
| Power Supply | Rechargeable Li-ion Battery (220 VAC, 50 Hz, 50 W charger) |
| Dimensions | 298 mm (H) × 154 mm (W) × 336 mm (D) |
| Weight | 3.7 kg |
| Enclosure Material | Anodized Aluminum Alloy |
| Output Signals | RS-232 digital, 4–20 mA analog |
| Data Storage Capacity | 10,000 records |
| Flow Sensitivity | ±0.1% FS |
| Tilt Sensitivity | ±0.15% FS per 15° |
| Optional Accessories | Integrated sample pump, external thermal printer |