Chemical Analysis Instruments
Filter
Showing 2161–2190 of 10669 results
| Brand | CLEAN |
|---|---|
| Origin | USA |
| Model | CON200 |
| Portability | Portable |
| Conductivity Range | 0.000 µS/cm to 400.0 mS/cm |
| TDS Range | 0.000 mg/L to 400.0 g/L |
| Resistivity Range | 0 to 100.0 MΩ·cm |
| Salinity Range | 0.0 to 260.0 g/L |
| Temperature Range | −10.0 °C to 110.0 °C |
| Accuracy | ±0.5% of Full Scale |
| Resolution | 0.001 µS/cm to 0.1 mS/cm |
| Display | 65 × 40 mm backlit LCD |
| Protection Rating | IP67 |
| Data Storage | 50 readings |
| Power | Two AAA batteries (≥500 h lifetime) |
| Operating Environment | −5 °C to 60 °C, <90% RH |
| Dimensions | 94 × 190 × 35 mm (W × L × H) |
| Brand | CLEAN |
|---|---|
| Origin | USA |
| Model | CON500 |
| Form Factor | Benchtop |
| Conductivity Range | 0.000 µS/cm to 400.0 mS/cm |
| TDS Range | 0.000 mg/L to 400.0 g/L |
| Resistivity Range | 0 to 100.0 MΩ·cm |
| Salinity Range | 0.0 to 260.0 g/L |
| Temperature Range | −10.0 °C to 110.0 °C |
| Accuracy | ±0.5% F.S. |
| Minimum Resolution | 0.001 µS/cm |
| Data Storage | 50 sets |
| Auto Power-Off | 10 min (configurable) |
| IP Rating | IP65 |
| Operating Environment | −5 °C to 60 °C, <90% RH |
| Dimensions (W×L×H) | 140 × 210 × 35 mm |
| Weight | 650 g |
| Brand | CLEAN (USA) |
|---|---|
| Origin | Shanghai, China |
| Model | CON5000 |
| Form Factor | Benchtop |
| Application | Industrial Online Monitoring |
| Conductivity Range | 0.000 µS/cm to 400.0 mS/cm |
| TDS Range | 0.000 ppm to 400.0 ppt |
| Resistivity Range | 0.000 µS/cm to 400.0 mS/cm (inverted calculation) |
| Salinity Range | 0.0–260.0 g/L |
| Temperature Range | −10.0–110.0 °C |
| Accuracy | ±0.5% FS |
| Minimum Resolution | 0.001 µS/cm (low-range), up to 0.1 mS/cm (high-range) |
| Output | Dual 4–20 mA, Isolated RS-485 (Modbus RTU), 3 SPST Relays |
| Power Supply | 85–260 VAC or 18–36 VDC (configurable) |
| Enclosure Rating | IP65 |
| Operating Temperature | 0–60 °C |
| Display | 128×64 Dot-Matrix LCD (bilingual: English/Chinese) |
| Electrode Constants Supported | 0.01, 0.1, 1.0, 10.0 cm⁻¹ |
| TDS Factor Adjustable | 0.40–1.00 |
| Temp. Compensation | Automatic (PT1000) or Manual |
| Brand | CLEAN |
|---|---|
| Origin | USA |
| Model | CS1778 |
| Instrument Type | Inline/Process pH Electrode |
| Parameter Type | Single-Parameter (pH) |
| Measurement Range | 0–14.0 pH |
| Resolution | 0.1 pH |
| Accuracy | ±0.1 pH |
| Calibration Standard | NIST-traceable USA buffer solutions (pH 4.01, 7.00, 10.01) |
| Operating Temperature | 0–90 °C |
| Max Pressure | 20 bar (@ 50 °C) |
| Body Material | Polyphenylsulfone (PPS) |
| Reference System | SNEX Ag/AgCl/KCl solid-state junction |
| Liquid Junction | Solid-State Junction (SSJ), non-porous, ion-exchange-free |
| Temperature Sensor | Integrated Pt1000 RTD |
| Process Connection | NPT 3/4" |
| Cable | 5 m coaxial, BNC termination |
| pH Sensing Element | Chemically resistant, abrasion-resistant glass membrane |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CS2768 |
| Pricing | Available Upon Request |
| Brand | CLEAN |
|---|---|
| Origin | Taiwan |
| Model | CS3523D |
| Detection Parameter | Conductivity (single-parameter) |
| Form Factor | Pen-type |
| Conductivity Range | 0.00–20.00 µS/cm |
| TDS Range | 0–10.00 ppm |
| Resistivity Range | 0–10.00 MΩ·cm (inferred from low-conductivity context) |
| Salinity Range | 0.0–260.0 g/L |
| Temperature Range | −10.0–110.0 °C |
| Accuracy | ±0.5% FS |
| Minimum Resolution | 0.01 µS/cm |
| Electrode Constant | K = 0.01 cm⁻¹ |
| Reference Temperature | 15.0–35.0 °C |
| Temperature Coefficient | 0.00–10.00 %/°C |
| TDS Factor | 0.40–1.00 |
| Pressure Rating | 0 to −8 bar (vacuum-rated) |
| Housing Material | Polypropylene (PP) |
| Wetted Parts | Glass body, platinum electrodes |
| Connection | NPT 3/4″ |
| Cable Length | 5 m |
| Interface | RS-485 Modbus RTU |
| Power Supply | DC 12 V |
| Output Signals | Conductivity, TDS, Temperature |
| Ingress Protection | IP68 |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M30 |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PH200 |
| Pricing | Available Upon Request |
| Brand | CLEAN |
|---|---|
| Origin | USA |
| Model | PH30 |
| Instrument Type | Pen-style pH Meter |
| Parameter Type | Single-parameter (pH) |
| Measurement Range | -2.00 to +16.00 pH |
| Resolution | 0.01 pH |
| Accuracy | ±0.01 pH |
| Calibration Standards | USA (4.01, 7.00, 10.01) and NIST traceable (4.01, 6.86, 9.18) |
| Temperature Range | 0.0–100.0 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Compensation | ATC / MTC |
| Electrode | Replaceable high-impedance flat-surface electrode (CS1930) |
| Display | Multi-line LCD (21 × 34 mm), backlight with energy-saving mode |
| IP Rating | IP67 |
| Auto-off | 5 min |
| Power | 1 × 1.5 V AAA battery (>500 h lifetime) |
| Dimensions | 185 × 40 × 48 mm |
| Weight | 95 g |
| Brand | CLEAN |
|---|---|
| Origin | USA |
| Model | PH500 |
| pH Range | -2.00 to 16.00 |
| Resolution (pH) | 0.01 pH |
| Accuracy (pH) | ±0.2% F.S. |
| mV Range | -2000 to +2000 mV |
| Resolution (mV) | 1 mV |
| Accuracy (mV) | ±0.2% F.S. |
| Temperature Range | -10.0 to 110.0 °C |
| Resolution (Temp) | 0.1 °C |
| Accuracy (Temp) | ±0.2 °C |
| Calibration | Auto 3-point with selectable buffer sets (e.g., 4.00/6.86/9.18 or 4.01/7.00/10.01) |
| Data Storage | 50 readings |
| Auto Power-Off | After 10 min idle |
| Dimensions | 140 × 210 × 35 mm (W×L×H) |
| Weight | 650 g |
| Operating Environment | -5 to 60 °C, <90% RH |
| Brand | Cleket |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | OEM Manufacturer |
| Regional Classification | Domestic (China) |
| Model | AS-2902-110 |
| Instrument Type | Multifunctional Liquid Autosampler |
| Maximum Sample Capacity | 110 vials |
| Minimum Injection Volume | 0.1 µL |
| Loop Volume | 10 µL |
| Positioning Accuracy | 0.1 mm |
| Drive Mechanism | Rotating turret with closed-loop stepper motor control |
| Needle Wash Mode | Internal wall wash, programmable cycles |
| Syringe Options | 1–500 µL (selectable: 1, 5, 10, 25, 50, 100, 250, 500 µL) |
| Sample Tray Format | 110-position standard 12 × 32 mm vial configuration |
| Signal Interface | 2-channel injection trigger output + 2-channel GC remote control input |
| Injection Repetition per Sequence | 1–99 times |
| Method Storage | 20 pre-programmed methods |
| Dual Inlet Support | Yes (up to 2 GC inlets) |
| Aspiration/Injection Speed Modes | Fast / Medium / Slow / User-defined |
| Display Interface | Touchscreen with switchable English/Chinese UI |
| Sampling Precision | ±0.01% |
| Injection Precision (RSD) | < 0.5% |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | Cleket |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | AS-3901AHF |
| Instrument Type | Static Headspace Sampler |
| Automation Level | Fully Automatic |
| Vial Heating Range | Ambient to 200 °C (1 °C increments) |
| Valve & Transfer Line Temperature Control Range | Ambient to 200 °C (1 °C increments) |
| Temperature Control Accuracy | ±1 °C |
| Sample Loop Volume | Standard 2.5 mL (customizable to 5 mL) |
| Vial Capacity | 36 positions |
| Vial Size | Standard 20 mL (customizable to 10 mL) |
| Liquid Injection Mode | 160-position tray for 2 mL vials |
| Headspace Injection Precision | RSD < 2.0% (ethanol/water solution) |
| Auto-Standard Preparation | Up to 10 stock solutions |
| Brand | Cleket |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Manufacturer |
| Product Origin | Domestic |
| Model | AS-3901AS |
| Instrument Type | GC Autosampler |
| Max Injection Volume | 500 µL |
| Min Injection Volume | 0.1 µL |
| Quantitative Loop Volumes | 1, 5, 10, 25, 50, 100, 250, 500 µL (selectable) |
| Positioning Accuracy | < 0.3 mm |
| Motion Mechanism | Rotary Carousel |
| Needle Wash | Internal & External Wall Cleaning, Unlimited Cycles |
| Repeat Injection Capability | Unlimited |
| Brand | Cleket |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | AS-3901ASH |
| Instrument Type | Multifunctional Autosampler |
| Max Sample Capacity | 160 positions |
| Minimum Injection Volume | 0.1 µL |
| Loop Volume | 500 µL |
| Positioning Accuracy | 0.1 mm |
| Motion Mechanism | Turret-style rotary motion |
| Needle Wash Mode | Internal and external wall wash, programmable cycles |
| Repeat Injection Capability | Unlimited |
| Brand | Cloudoptek |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Portable |
| Instrument Category | Fourier Transform Infrared (FTIR) & Raman Spectrometer |
| Model | DRF-600 |
| Compliance | CE, RoHS, ISO/IEC 17025–compatible operation environment |
| Brand | Cloudoptek |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Portable |
| Instrument Category | Fourier Transform Infrared Spectrometer |
| Model | FTIR-800 |
| Key Specifications | ATR-based micro-FTIR optical architecture, solid/liquid sample compatibility, multi-component identification capability (≥3 components), fluorescence-insensitive detection, thermal-sensitive & energetic material compatible |
| Compliance | Designed to support field-deployable GLP-aligned workflows |
| Brand | Cloudoptek |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Instrument Type | Portable/Handheld Raman Spectrometer |
| Spectral Range | 150–3000 cm⁻¹ |
| Brand | CloudOptek |
|---|---|
| Origin | Beijing, China |
| Model | M1/M2 |
| Instrument Type | Portable/Handheld Raman Spectrometer |
| Spectral Range | 200–1800 cm⁻¹ |
| Spectral Resolution | 8–11 cm⁻¹ |
| Spatial Resolution | 1 µm (lateral), 1 µm (axial) |
| Minimum Wavenumber | 200 cm⁻¹ |
| Spectral Reproducibility | <1 cm⁻¹ |
| Laser Wavelength | 785 nm / 830 nm |
| Laser Power | 1–500 mW (adjustable) |
| Detection Time | <3 s (e.g., ethanol) |
| Display | 5.7″, 2560×1440 |
| Camera System | 8 MP + 16 MP + 2 MP (iris recognition) |
| Connectivity | 4G, Wi-Fi, Bluetooth, NFC |
| GNSS Support | A-GPS, GLONASS, BeiDou |
| Battery Capacity | 5700 mAh |
| Dimensions | 159 × 78.9 × 27 mm |
| Weight | 410 g |
| Database | Cloud-synced base library, expandable library, user-defined library |
| AI Capabilities | Deep learning–based compound identification, mixture quantification (<5% error), real-time spectral classification |
| Brand | Cloudoptek |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Portable/Handheld Raman Spectrometer |
| Model | M1S |
| Configuration | Area-scanning Raman system with digital micromirror device (DMD)-based beam steering |
| Laser Operation Mode | Defocused raster scanning (non-focalized, programmable rectangular scan field) |
| Scan Field | Configurable up to 3 × 3 mm² |
| Detection Method | Point-by-point spectral acquisition with spatial registration for Raman imaging |
| Brand | CloudOptek |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (PRC) |
| Model | MFP-600 |
| Detection Range | Organophosphorus agents (G- and V-series nerve agents), sulfur-containing agents (HD, HL vesicants), nitrogen/hydrogen/oxygen-containing agents (HN, AC), arsenical agents (L, SA), and combustible gases (CH) |
| Detection Limits | ≤0.05 µg/L for Sarin (GB), ≤10.00 µg/L for Hydrocyanic Acid (AC), ≤5 µg/L for Lewisite (L), ≤1 µg/L for Sulfur Mustard (HD) |
| Response Time | 2–60 seconds (agent-dependent) |
| Brand | CloudOptek |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | MP-800 |
| Instrument Type | Portable/Handheld Raman Spectrometer |
| Optical Architecture | Transmission Volume Phase Grating (VPG), Spatial Direct Coupling, Confocal Design |
| Environmental Rating | IP67-rated (Dustproof, Waterproof to 1 m for 30 min, Shock-resistant per MIL-STD-810G Method 516.6) |
| Brand | Cloudoptek |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic (PRC) |
| Model | MP-800S |
| Instrument Type | Portable/Handheld Raman Spectrometer |
| Optical Core | Transmission Volume Phase Grating (VPG) + Spatial Direct Coupling + Confocal Architecture |
| Scanning Method | Digital Micromirror Device (DMD)-Driven Area Scan |
| Detection Mode | Surface-Averaged Raman Mapping |
| Spectral Library | >10,000 reference spectra (expandable) |
| Brand | CloudOptek |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | T1 |
| Instrument Type | Portable Raman Spectrometer with Integrated Radiation & Explosives Detection |
| Detection Modalities | Scintillation-based Gamma/Neutron Radiation Monitoring |
| Brand | CMC |
|---|---|
| Origin | Germany |
| Model | CMC-TM-H2O |
| Product Type | In-Line Dew Point Analyzer |
| Measurement Principle | Phosphorus Pentoxide (P₂O₅) Electrolytic Method |
| Operating Temperature Range | -20 °C to +80 °C |
| Accuracy | ±0.2 °C dew point equivalent |
| Repeatability | ±0.1 °C dew point equivalent |
| Brand | CMC |
|---|---|
| Origin | Beijing, China |
| Model | CMC-TW-H2O |
| Product Type | Online Dew Point Sampling System |
| Measurement Principle | Electrolytic (P₂O₅-based) |
| Operating Temperature | 40 °C |
| Accuracy | ±1% of full scale |
| Repeatability | ±0.5% of full scale |
| Sample Flow Rate | 20 or 100 NL/h |
| Operating Pressure | 0.1–1.5 barg |
| Sensor Material Options | Stainless Steel, Monel 400, Hastelloy, Glass, PFA |
| Electrode Material | Platinum or Rhodium |
| Seal Material Options | Viton, FEP, or FFKM |
| Gas Fitting | 6 mm or 1/4″ compression fitting |
| Electrical Connector | LEMO waterproof connector |
| Mounting | Vertical installation via three M4 screws |
| IP Rating | IP20 (benchtop/rack), IP65 (wall-mount) |
| Power Supply | 80–230 VAC, 50/60 Hz |
| Power Consumption | 8 W |
| Ambient Temperature Range | −10 °C to +50 °C |
| Enclosure Dimensions (benchtop) | 363 × 115 × 377 mm |
| Weight (instrument) | ~6 kg |
| Probe Dimensions | Ø43 × 120 mm |
| Probe Weight | ~300 g |
| Response Time (T₅₀) | <8 s |
| Calibration | Automatic zero and span calibration at startup |
| Output Signals | 4–20 mA / 0–20 mA / 0–10 V (user-selectable) |
| Digital Interface | RS232 |
| Relay Outputs | 2 alarm relays (230 VAC / 1 A), 5 range-indication relays, 5 external range-switching inputs |
| Display | Backlit LCD |
| Brand | CMC |
|---|---|
| Origin | Germany |
| Model | iTMA-204-P |
| Instrument Principle | Electrolytic (P₂O₅ sensor) |
| Operating Temperature | +5 to +50 °C |
| Accuracy | ±1% of full scale |
| Repeatability | ±0.1% of full scale |
| Measurement Ranges | 0–10 ppm, 0–100 ppm, 0–1000 ppm, 0–2500 ppm (auto/manual range switching) |
| Response Time (T₉₀) | <1 s |
| T₅₀ Response | <8 s |
| Sample Flow Rate | 20 NL/h |
| Recommended Sample Pressure | 0.1–0.5 barg |
| Display | Touchscreen with multilingual support (including Chinese) |
| Analog Output | 0/4–20 mA (configurable) |
| Alarm Outputs | High/Low (user-definable thresholds) |
| Power Supply | Rechargeable Li-ion battery or 80–230 VAC, 50–60 Hz |
| Dimensions | 420 × 115 × 390 mm (W × H × D) |
| Weight | ~6 kg |
| Brand | CMC |
|---|---|
| Origin | Germany |
| Model | iTMA-202 |
| Product Type | Online Dew Point Analyzer |
| Measurement Principle | Phosphorus Pentoxide (P₂O₅) Electrolytic Method |
| Operating Temperature | −10 °C to +50 °C |
| Accuracy | ±1% of full scale |
| Repeatability | ±0.1% of full scale |
| Range Options | 0–10 ppm / 0–100 ppm / 0–1000 ppm / 0–2500 ppm (auto/manual switching) |
| Response Time (T₉₀) | <1 s |
| T₅₀ Response | <8 s |
| Sample Flow Rate | 20 NL/h |
| Recommended Sample Pressure | 0.1–0.5 barg |
| Sample Temperature | 5–50 °C |
| Ambient Temperature | 5–65 °C |
| Display | Touchscreen with multilingual UI (including Chinese) |
| Analog Output | 0/4–20 mA (configurable) |
| Alarm Outputs | 2 relay outputs |
| Dimensions (W×H×D) | 258 × 168 × 325 mm |
| Weight | ~5 kg |
| Cable Length | Standard 3 m (up to 300 m optional) |
| Brand | CMC (Schimse) |
|---|---|
| Origin | Germany |
| Model | iTMA-202-19" |
| Type | Online Dew Point Analyzer |
| Principle | Phosphorus Pentoxide (P₂O₅) Electrolytic Method |
| Operating Temperature | 5–50 °C |
| Accuracy | ±1% of full scale |
| Repeatability | ±0.1% of full scale |
| Measurement Ranges | 0–10 / 100 / 1,000 / 2,500 ppm H₂O (auto/manual switching) |
| Response Time (T₉₀) | <1 s |
| T₅₀ Response | <8 s |
| Sample Flow Rate | 20 NL/h |
| Recommended Sample Pressure | 0.1–0.5 barg |
| Display | Touchscreen with multilingual support (including Chinese) |
| Analog Output | 0/4–20 mA (configurable) |
| Alarm Outputs | 2 relay outputs |
| Enclosure Dimensions | 483 mm (W) × 135 mm (H) × 345 mm (D) |
| Standard Cable Length | 3 m (up to 300 m optional) |
| Brand | CMC |
|---|---|
| Origin | Germany |
| Model | iTMA-202-19"-Ex |
| Product Type | Online Dew Point Analyzer |
| Measurement Principle | Phosphorus Pentoxide (P₂O₅) Electrolytic Method |
| Operating Temperature | -10 °C to +50 °C |
| Accuracy | ±1% of full scale |
| Repeatability | ±0.1% of full scale |
| Range Options | 0–10 ppm / 0–100 ppm / 0–1000 ppm / 0–2500 ppm (auto/manual switching) |
| Response Time (T₉₀) | <1 s |
| T₅₀ Response | <8 s |
| Sample Flow Rate | 20 NL/h |
| Recommended Sample Pressure | 0.1–0.5 barg |
| Sample Temperature | 5–50 °C |
| Environmental Operating Range | 5–65 °C |
| Display | Touchscreen with multilingual UI (including Chinese) |
| Analog Output | 0/4–20 mA (configurable) |
| Alarm Outputs | 2 relay outputs |
| Intrinsic Safety | Integrated Zener barrier |
| Enclosure | 19" rack-mount (482 mm W × 133 mm H × 350 mm D) |
| Cable Length | Standard 3 m, optional up to 300 m |
| Brand | CMC (Himsi) |
|---|---|
| Origin | Germany |
| Model | iTMA-202-P |
| Instrument Principle | Electrolytic (P₂O₅ sensor) |
| Operating Temperature | +5 to +50 °C |
| Accuracy | ±1% of full scale |
| Repeatability | ±0.1% of full scale |
| Measurement Ranges | 0–10, 0–100, 0–1000, 0–2500 ppm H₂O (auto/manual range switching) |
| Response Time (T₉₀) | <1 s |
| T₅₀ Response | <8 s |
| Sample Flow Rate | 20 NL/h |
| Recommended Sample Pressure | 0.1–0.5 barg |
| Display | Touchscreen with optional Chinese language support |
| Analog Output | 0/4–20 mA (configurable) |
| Alarm Outputs | High/Low alarm (user-definable thresholds) |
| Power Supply | Internal rechargeable Li-ion battery or 80–230 VAC, 50–60 Hz |
| Dimensions | 363 × 115 × 377 mm (W × H × D) |
| Weight | ~6 kg |
| Cable Length | Standard 3 m (up to 300 m optional) |