- All
- Favorite
- Popular
- Most rated
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDK-360C-II |
| Bath Volume | 360 L |
| Temperature Range | RT+5°C to 100°C |
| Temperature Resolution | 0.1°C |
| Control Mode | Heating-Only PID |
| Circulation Type | Internal Pump Circulation |
| Construction | 304 Stainless Steel Interior & Powder-Coated Cold-Rolled Steel Exterior |
| Insulation Thickness | 100 mm |
| Power Supply | AC 380 V |
| Internal Dimensions (W×H×D) | 1000 × 450 × 800 mm |
| External Dimensions (W×H×D) | 1200 × 955 × 1270 mm |
| Safety Features | Dry-run Protection, Over-Temperature Alarm, Auto-Recovery After Power Failure, Parameter Memory Retention |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDK-120A |
| Bath Volume | 120 L |
| Temperature Range | RT + 5°C to 100°C |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Heating Power | 9000 W |
| Supply Voltage | AC 380 V, 50 Hz |
| Control Type | PID-based microprocessor controller with timer function |
| Construction | 304 stainless steel interior and lid, electrophoretic epoxy-coated exterior, Teflon-coated immersion surfaces |
| Safety Features | Dry-run protection with water level sensor, over-temperature alarm and cut-off, auto-recovery after power interruption, parameter memory retention |
| Optional Configurations | External chiller integration (R-series), 30-segment programmable temperature ramping, auto-fill module (requires external water source) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDCW-4006 |
| Bath Volume | 6 L |
| Temperature Range | −40 °C to +100 °C |
| Temperature Stability | ±0.5 °C |
| Temperature Resolution | ±0.1 °C |
| Circulation Type | Internal Only |
| Control Mode | PID with Touchscreen LCD |
| Construction | 304 Stainless Steel Interior & Work Surface |
| Power Supply | AC 380 V |
| Safety Protections | Over-Temperature Alarm, Low-Level Fluid Detection, Compressor Overheat & Overcurrent Protection, Power-Fail Memory |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDK-8DZ |
| Instrument Type | Triple-Zone Circulating Water/Oil Bath |
| Temperature Range | RT+5 to 99°C |
| Temperature Resolution | 0.1°C |
| Bath Capacity | 3 × 3 L (independent zones) |
| Circulation | Internal & External |
| Temperature Control Mode | Heating & Cooling Capable |
| Input Power | 1500 W |
| Voltage | AC 220 V, 50 Hz |
| Construction | 304 Stainless Steel Inner Tank & Lid |
| Insulation | Multi-Layer Waterproof Thermal Insulation |
| Safety Features | Over-Temperature Alarm, Auto-Recovery After Power Failure, Parameter Memory Retention |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | JCY-1012 |
| Bath Type | Oil/Water Bath |
| Temperature Range | Ambient +5°C to 300°C |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | ±0.1°C |
| Input Power | 2 × 400 W = 800 W |
| Supply Voltage | 220 V, 50 Hz |
| Stirring Speed | 0–2400 rpm (adjustable), LED digital display |
| Max. Stirring Capacity | 2 × 2000 mL |
| Stirring Power | 2 × 25 W |
| Internal Tank Dimensions | Ø220 mm × 100 mm (customizable height >100 mm) |
| Drain Valve | Yes |
| Construction | Stainless steel inner tank & lid, electrostatically coated exterior |
| Safety Features | Power-loss memory, over-temperature alarm, auto-recovery on power restoration |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDC-1010M |
| Bath Volume | 10 L |
| Temperature Range | −10 °C to 100 °C |
| Temperature Stability | ±0.005 °C |
| Temperature Resolution | ±0.001 °C |
| Control Method | PID-based digital temperature control |
| Circulation Type | Internal recirculation (external circulation configurable) |
| Heating/Cooling Mode | Integrated thermoelectric + compressor-based dual-mode |
| Construction | 304 stainless steel tank and work surface |
| Power Supply | AC 220 V |
| Safety Protections | Over-temperature alarm, low-level fluid detection, compressor overheat & overcurrent protection, power-fail memory |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model Series | TDK & DK4 |
| Bath Volume | 12–120 L |
| Temperature Range | RT +5°C to 100°C |
| Temperature Resolution | 0.1°C |
| Temperature Stability | ±0.03°C to ±0.5°C (model-dependent) |
| Heating Power | 1000–9000 W |
| Voltage | AC 220 V, 50 Hz |
| Control Type | PID-based microprocessor controller with LED/LCD display |
| Optional Features | Dry-run protection (F-series), recirculating pump (B-series), triple-zone independent temperature control (D-series), refrigeration module (R-series), programmable 30-segment timer, RS485 communication interface, auto-refill (external water source required) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | WDC-164AB |
| Bath Volume | 164 L |
| Temperature Range | +5 to 100 °C |
| Control Mode | Refrigeration & Heating (optional R-series compressor cooling) |
| Circulation Type | Internal & External |
| Temperature Stability | ±0.3 °C (typical) |
| Temperature Resolution | 0.1 °C |
| Power Supply | AC 220 V, 50 Hz |
| Construction | 304 Stainless Steel Interior & Lid |
| Safety Features | Dry-run protection (F-type), Over-temperature alarm, Auto-recovery after power failure, Parameter memory retention |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDC Series |
| Temperature Range | –5 °C to 100 °C (standard) |
| Temperature Stability | ±0.1 °C (standard) |
| Temperature Uniformity | ±0.5 °C (standard) |
| Bath Volume | 6 L to 50 L |
| Circulation Type | Internal recirculation (with external loop capability) |
| Control System | PID-based touchscreen LCD controller |
| Construction | 304 stainless steel tank and work surface |
| Power Input | 600 W to 7200 W |
| Safety Protections | Over-temperature alarm, low-level fluid detection, compressor overheat/overcurrent protection, power-fail memory |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDK-24R |
| Bath Volume | 24 L |
| Temperature Range | 15 °C to 70 °C |
| Temperature Stability | ±0.3 °C |
| Temperature Resolution | 0.1 °C |
| Cooling/Heating Type | Dual-mode (Refrigeration & Heating) |
| Input Power | 1000 W |
| Supply Voltage | AC 250 V, 50 Hz |
| Communication Interface | RS485 |
| Construction | Stainless Steel Interior & Deck, Powder-Coated Exterior |
| Circulation Mode | Internal/External Dual-Mode Pump System |
| External Cooling Capability | Yes (via dual-port fluid circulation) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDK-F54A |
| Bath Volume | 54 L |
| Temperature Range | RT+5°C to 100°C |
| Temperature Resolution | 0.1°C |
| Temperature Stability | ±0.5°C (typical, per ISO 17025-compliant calibration conditions) |
| Heating Power | 4000 W |
| Power Supply | AC 220 V, 50 Hz |
| Circulation Type | Internal recirculation pump |
| Control Mode | PID-based heating-only temperature regulation |
| Construction | 304 stainless steel inner chamber and lid, electrostatically sprayed steel exterior |
| Safety Features | Dry-run protection with water level sensor, over-temperature alarm & cut-off, power-failure parameter retention |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FRC-5-10PLC |
| Instrument Type | Circulating Constant-Temperature Bath |
| Temperature Control Mode | Refrigeration & Heating Dual-Mode |
| Bath Volume | 30 L |
| Circulation Type | Internal & External Loop |
| Heating Power | 1.5 kW / 3.0 kW Dual-Stage |
| Communication Interface | RS-485 with Modbus RTU Protocol |
| PLC Integration | Yes (Addressable I/O Mapping Provided) |
| Insulation | External Thermal Insulation Compatible |
| Cooling Method | Natural Convection (Post-Heating) |
| Bath Medium | Water or Water-Glycol Mixture |
Show next