Common Laboratory Equipment
Filter
Showing 6571–6600 of 18046 results
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Pilot-R |
| Price Range | USD 4,200–7,000 (est.) |
| Pure Water Grade | ASTM Type I |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | <0.1 ppb |
| Total Organic Carbon (TOC) | <3 ppb |
| Microbial Count | <0.01 CFU/mL |
| Endotoxin | <0.001 EU/mL |
| Particles (>0.1 µm) | <1 particle/mL |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Pilot-RO |
| Price Range | USD 1,400 – 4,200 (est.) |
| Purified Water Grade | ASTM Type I RO Water |
| Resistivity | 18.2 MΩ·cm @ 25°C |
| Heavy Metals & Soluble Silica | <0.1 ppb |
| Total Organic Carbon (TOC) | <3 ppb |
| Microbial Count / Endotoxins | <0.001 EU/mL |
| Particles (>0.1 � | m): <1 particle/mL |
| RO Membrane | Dow FilmTec™ FT30 HR (USA) |
| UV Lamp | Dual-Wavelength (185 nm & 254 nm), Imported |
| UF Module | MWCO 5000 Da, Imported |
| Final Filter | 0.2 μm PES Membrane, Imported |
| RO Recovery Rate | >30% |
| Feed Water Requirement | Municipal tap water, TDS <200 ppm, 5–45°C, 0.1–0.4 MPa |
| Flow Rate (25°C) | 45–125 L/h (model-dependent) |
| Integrated Storage | Two 15 L NSF-certified pressurized tanks |
| Power Supply | 220 VAC, 50 Hz, 120–240 W |
| Enclosure | Powder-coated stainless steel chassis |
| Compliance | NSF/ANSI Standard 58, GLP-ready architecture, FDA 21 CFR Part 11–compatible data logging (via optional software module) |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Pilot-RO |
| Pricing | Available Upon Request |
| Pure Water Output | 45–180 L/hr (Model-Dependent) |
| RO Salt Rejection Rate | 97–99% (New Membrane) |
| Organic Rejection (>200 Da) | >99% |
| Particulate & Bacterial Retention | >99% |
| Bacterial Count | <0.01 CFU/mL (with optional 0.2 µm PES final filter) |
| Particles (>0.2 µm) | <1/mL (with optional 0.2 µm PES final filter) |
| Feed Water | Municipal tap water, 5–45 °C, 1.0–4.0 kgf/cm² pressure |
| Dimensions (L×W×H) | 640 × 540 × 1110 mm |
| Weight | ~70 kg |
| Electrical Supply | 220 V, 50 Hz |
| Power Consumption | 120–240 W (model-dependent) |
| Compliance | GLP-compliant architecture, NSF-certified tubing/fittings, DOW FilmTec™ RO membranes, USP <1231> aligned design principles |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Pilot-S |
| Price Range | USD 4,200 – 7,000 (est.) |
| Purified Water Grade | ASTM Type I / ISO 3696 Class 1 / GB/T 33087-2016 Grade I |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | <0.01 ppb |
| Total Organic Carbon (TOC) | <3 ppb |
| Microbial Count | <0.001 CFU/mL |
| Endotoxin | <0.001 EU/mL |
| Particles (>0.1 µm) | <1 particle/mL |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Model | Pilot-S |
| Production Capacity (Pure Water) | 45–180 L/h (varies by series) |
| Deionized Water Output | 2.0–3.0 L/min (tank-fed) |
| UP Water Resistivity | 18.2 MΩ·cm @ 25°C |
| Heavy Metals | <0.01 ppb |
| TOC | ≤10 ppb (Standard), ≤3 ppb (UV/UF variants) |
| Bacteria | <0.01 CFU/mL |
| Particles (>0.2 µm) | <1/mL |
| Endotoxins | <0.001 EU/mL (UVF variant) |
| RNases | <1 pg/mL (UVF variant) |
| DNases | <5 pg/mL (UVF variant) |
| RO Salt Rejection | 97–99% (new membrane) |
| Organic Rejection (>200 Da) | >99% |
| Input Water | Municipal tap water, 5–45°C, 1.0–4.0 kgf/cm² |
| Dimensions (L×W×H) | 640×540×1110 mm |
| Weight | ~70 kg |
| Power | 120–300 W (model-dependent) |
| Compliance | GLP-compliant architecture, NSF-certified fluid path components, DOW RO membranes, dual-wavelength UV (185/254 nm), 5000 Da MWCO UF module (UVF), 0.2 µm PES final filter |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Model | R-DIS |
| Type | Standalone or Touch-System-Integrated Remote Dispenser |
| Compliance | Designed for ISO 3696 Grade 1 / ASTM D1193 Type I / CLSI EP21-A2 water quality monitoring |
| Display | 3.0-inch color TFT graphic LCD |
| Dispensing Modes | Instant Flow & Precise Volume Delivery (10–9990 mL) |
| Flow Sensor | Integrated electromagnetic flow meter |
| Resistivity Sensor | High-accuracy inline conductivity/resistivity probe (0.01 µS/cm resolution, temperature-compensated to 25°C) |
| Platform Dimensions | 222 × 150 mm tempered glass base |
| Adjustable Height Range | 280–480 mm |
| Material Contact | FDA-compliant PEEK, PTFE, and 316L stainless steel wetted parts |
| Data Logging | Internal buffer for ≥10,000 dispensing events with timestamp, volume, resistivity, and temperature metadata |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | R-DIS-I / R-DIS-II / R-DIS Standalone |
| Pricing | Upon Request |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | RO DI |
| Quotation | USD 950 (FOB Shanghai) |
| Feed Water Quality | Municipal tap water (TDS < 200 ppm, 5–45 °C, pressure 1.0–4.0 kgf/cm²) |
| Purification Stages | PF + AC + RO + DI |
| Pre-filter | 1 × PP sediment cartridge |
| Carbon Filters | 2 × activated carbon cartridges |
| RO Membrane | 100 GPD (≈379 L/day), DOW Filmtec™ or CSM brand |
| DI Resin Columns | 2–3 × nuclear-grade ion exchange cartridges (imported) |
| Resistivity (DI water) | 15–18.2 MΩ·cm at 25 °C |
| Conductivity | 0.055–0.067 µS/cm |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Total Organic Carbon (TOC) | < 1 ppb (measured as non-detectable in standard operation) |
| Microbial Count | < 1 CFU/mL (with optional 0.2 µm PES final filter) |
| Particulates (>0.22 µm) | < 1 particle/mL (with optional 0.2 µm PES final filter) |
| RO Permeate TDS | ≤ 5% of feed water TDS (salt rejection ≥ 95%) |
| Flow Rate (DI water) | 15–30 L/h at 25 °C |
| Instantaneous Dispense Rate | > 1.8 L/min (with pressurized storage tank) |
| Display | Backlit LCD resistivity monitor + handheld TDS pen (battery-powered) |
| Dimensions (W×D×H) | 41 × 22 × 42 cm |
| Weight | ~20 kg |
| Power Supply | AC 220 V ±10%, 50 Hz, 72 W |
| Certifications | NSF/ANSI Standard 58 (RO components), NSF/ANSI Standard 61 (plumbing materials), CE-marked electrical safety |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Smart-D |
| Pricing | Available Upon Request |
| Pure Water Output | Up to 2.0 L/min |
| UP Water Resistivity (25°C) | 18.2 MΩ·cm |
| Heavy Metals | < 0.01 ppb |
| TOC | < 10 ppb (Standard), < 3 ppb (UV-equipped models) |
| Bacteria | < 0.01 CFU/mL |
| Endotoxins | < 0.001 EU/mL (UV + UF models) |
| Particles (>0.1 µm) | < 1/mL |
| RNases | < 1 pg/mL (UV + UF models) |
| DNases | < 5 pg/mL (UV + UF models) |
| DI Water Resistivity | ≥ 5 MΩ·cm |
| Feed Water | RO, DI or distilled water |
| Temp | 5–45 °C |
| Pressure | 1 atm |
| Dimensions (L×W×H) | 410 × 220 × 420 mm |
| Weight | ~20 kg |
| Electrical | 100–240 V, 50/60 Hz |
| Power Consumption | 72 W |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | Smart-D |
| Price | USD 2,390 (approx.) |
| Purified Water Grade | ASTM Type I / ISO 3696 Grade 1 / GB/T 6682-2008 Class I |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | < 0.01 ppb |
| Total Organic Carbon (TOC) | < 3 ppb |
| Microbial Count | < 0.01 CFU/mL |
| Endotoxin | < 0.001 EU/mL |
| Particles (>0.1 µm) | < 1 particle/mL |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Model | Smart-Q |
| Pure Water Output | 15 or 30 L/hour |
| DI Water Output | Up to 2.0 L/min (with pressurized tank) |
| Resistivity | 16–18.2 MΩ·cm |
| Conductivity | 0.067–0.055 µS/cm |
| Bacterial Count | <0.01 CFU/mL |
| Particles (>0.1 µm) | <1/mL |
| RO Salt Rejection | 97–99% (new membrane) |
| Organic Rejection (>200 Da) | >99% |
| Particulate & Bacterial Rejection (RO) | >99% |
| Feed Water | Municipal tap water, 5–45 °C, 1.0–4.0 kgf/cm² |
| Dimensions (L×W×H) | 410×220×420 mm |
| Weight | ~20 kg |
| Electrical | 100–240 V, 50/60 Hz |
| Power Consumption | 48 W (Smart-Q15) / 72 W (Smart-Q30) |
| Certifications | NSF-certified tubing & fittings, DOW RO membranes, PES 0.45 + 0.1 µm terminal filter, dual-wavelength (185/254 nm) UV lamp, MWCO 5000 Da ultrafiltration module |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Smart-Q |
| Price Range | USD 1,400 – 4,200 (est.) |
| Purified Water Grade | ASTM Type I / ISO 3696 Grade 1 |
| Resistivity | 15–18.2 MΩ·cm |
| Heavy Metals & Soluble Silica | <0.1 ppb |
| Total Organic Carbon (TOC) | <3 ppb |
| Microbial Count | <0.01 CFU/mL |
| Endotoxin | <0.001 EU/mL |
| Particles (>0.1 µm) | <1 particle/mL |
| UV Wavelengths | 185 nm & 254 nm |
| Final Filtration | 0.45 + 0.1 µm PES membrane |
| RO Membrane | Dow FilmTec™ certified |
| Compliance | Meets GB/T 6682–2008 Class I, ASTM D1193–20, ISO 3696:1995 |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Model | Smart-RO |
| Pure Water Output | 15 L/h (Smart-RO15) / 30 L/h (Smart-RO30) |
| Instant Flow Rate | Up to 2.0 L/min (with pressurized storage tank) |
| RO Rejection | >97–99% for ions (new membrane), >99% for organics (MW > 200 Da), >99% for particles & bacteria |
| Bacterial Count | <0.01 CFU/mL (with optional (0.45 + 0.1) µm PES terminal filter) |
| Particles (>0.2 µm) | <1/mL (with optional (0.45 + 0.1) µm PES terminal filter) |
| Feed Water | Municipal tap water, 5–45 °C, pressure 1.0–4.0 kgf/cm² |
| Dimensions (L×W×H) | 41 × 22 × 42 cm |
| Weight | ~20 kg |
| Electrical | 100–240 V, 50/60 Hz |
| Power Consumption | 48 W (Smart-RO15) / 72 W (Smart-RO30) |
| Certifications | NSF-certified tubing & fittings, DOW RO membrane, imported UV lamp (185 nm & 254 nm), MWCO 5000 Da UF module, PES terminal filter |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | Smart-RO |
| Price Range | USD 700–1,400 (est.) |
| Purified Water Grade | ASTM Type I Reagent Water (as per ASTM D1193-20) |
| Resistivity | ≥18.2 MΩ·cm @ 25°C |
| Heavy Metals & Soluble Silica | <0.1 ppb |
| Total Organic Carbon (TOC) | <3 ppb |
| Microbial Count | <0.01 CFU/mL |
| Endotoxins | <0.001 EU/mL |
| Particles (>0.1 µm) | <1 particle/mL |
| RO Membrane | Dow FilmTec™ FT30 (USA-sourced) |
| Pre-treatment Stages | PP Sediment Filter + Granular Activated Carbon + RO + Post-AC |
| Flow Rate | 15–30 L/h (model-dependent) |
| Ion Rejection Rate | ≥96% (fresh membrane) |
| Organic Rejection (MW >200 Da) | ≥99% |
| Microbial/Particulate Rejection | ≥99% |
| Power Supply | 220 VAC, 50 Hz |
| Power Consumption | 48 W (Smart-RO15) / 72 W (Smart-RO30) |
| Dimensions (L×W×H) | 41 × 22 × 42 cm |
| Weight | ~20 kg |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Model | Smart-S |
| Pure Water Output | 15 L/h (S15) / 30 L/h (S30) |
| Ultrapure Water Output | Up to 2.0 L/min (with pressurized tank) |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals | < 0.01 ppb |
| TOC | < 10 ppb (Standard), < 3 ppb (UV-equipped models) |
| Bacteria | < 0.01 CFU/mL |
| Endotoxins | < 0.001 EU/mL (UV + UF models) |
| Particles (>0.1 µm) | < 1/mL |
| RNase | < 1 pg/mL (UV + UF models) |
| DNase | < 5 pg/mL (UV + UF models) |
| RO Salt Rejection | 97–99% (new membrane) |
| Organic Rejection (>200 Da) | >99% |
| Microbial/Particulate Rejection | >99% |
| Feed Water | Municipal tap water, 5–45 °C, 1.0–4.0 kgf/cm² |
| Dimensions (L×W×H) | 410 × 220 × 420 mm |
| Weight | ~20 kg |
| Power | 100–240 V, 50/60 Hz |
| Power Consumption | 48 W (S15) / 72 W (S30) |
| Certifications | NSF-certified tubing & fittings |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Smart-S |
| Price Range | USD 1,400 – 4,200 (est.) |
| Purified Water Grade | ASTM Type I / ISO 3696 Grade 1 / CLSI EP22-A2 Class A |
| Resistivity | 18.2 MΩ·cm @ 25°C |
| Heavy Metals & Soluble Silica | < 0.01 ppb |
| Total Organic Carbon (TOC) | < 3 ppb |
| Microbial Count | < 0.01 CFU/mL |
| Endotoxin | < 0.001 EU/mL |
| Particles (>0.1 µm) | < 1 particle/mL |
| Brand | HHitech |
|---|---|
| Origin | Shanghai, China |
| Model | Smart-T |
| Pure Water Output | 20 L/h |
| UP Water Output | Up to 2.0 L/min (with full reservoir) |
| Resistivity (25 °C) | 18.2 MΩ·cm |
| Heavy Metals | < 0.01 ppb |
| TOC | < 10 ppb (Smart-T), < 3 ppb (Smart-T UVF) |
| Bacteria | < 0.01 CFU/mL |
| Particles (>0.1 µm) | < 1/mL |
| Endotoxins | < 0.001 EU/mL (Smart-T UVF) |
| RNases | < 1 pg/mL (Smart-T UVF) |
| DNases | < 5 pg/mL (Smart-T UVF) |
| RO Salt Rejection | 97–99% (new membrane) |
| Organic Rejection (>200 Da) | >99% |
| Microbial/Particulate Rejection | >99% |
| Feed Water | Municipal tap water, 5–45 °C, 1.0–4.0 kgf/cm² |
| Dimensions (L×W×H) | 410 × 220 × 420 mm |
| Weight | ~20 kg |
| Power | 100–240 V, 50/60 Hz, 48 W |
| Certifications | NSF-certified tubing & fittings |
| Brand | AS ONE |
|---|---|
| Origin | Japan |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Imported |
| Model No. | 1-3069-11 |
| Voltage | AC 100 V |
| Max. Operating Temperature | 400 °C |
| Temp. Control Method | PID Feedback Control |
| Heating Time to 200 °C | ≤6 min (at 25 °C ambient) |
| Heating Time to 300 °C | ≤15 min |
| Heating Time to 400 °C | ≤35 min |
| Brand | auniontech |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | HiCAM Fluo |
| Max Frame Rate | 4000 fps |
| Sensor Resolution | 1280 × 1024 pixels |
| Minimum Exposure Time | 2 µs |
| Gating Pulse Width (FWHM) | 40 ns |
| Gating Repetition Rate | Up to 100 kHz |
| Image Intensifier | Gen III, fiber-optically coupled |
| Cooling | Peltier-cooled intensifier (−30 °C typical operating temperature) |
| Interface | CoaXPress v2.0 (quad-link) |
| Pixel Size | 6.6 × 6.6 µm |
| Software Support | CoaXPress SDK, LabVIEW drivers, optional real-time FPGA-based frame grabber integration |
| Brand | Hiden |
|---|---|
| Origin | United Kingdom |
| Model | ESPion |
| Probe Type | Electrically Compensated, RF-Shielded Langmuir Probe |
| Operating Frequency Range | DC to 13.56 MHz |
| Maximum Scan Rate | 15 sweeps per second |
| Probe Drive Options | 300 mm / 600 mm / 915 mm motorized linear actuators, optional linear-rotary combi-drive |
| Cooling | Gas-cooled multi-sensor chain for high-temperature plasma operation |
| Compensation | Passive RF compensation (4.25 MΩ @ 13.56 MHz), reference probe for low-frequency drift & noise rejection |
| Data Interface | RS232, RS485, Ethernet LAN |
| Software | ESPsoft v5.x with pulse-gating, EEDF reconstruction, and automated plasma parameter extraction |
| Compliance | Designed for GLP-compliant plasma diagnostics |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | OPO |
| Price | Upon Request |
| Tuning Range | Signal 414–709 nm, Idler 710–2200 nm, SHG 220–350 nm |
| Pulse Width | <1–2 ns (FWHM) |
| Peak Pulse Energy | >12 mJ (Signal), up to 60 mJ @ 355 nm pump with 150 mJ input |
| Repetition Rate | 50 Hz |
| Linewidth | 0.15 nm @ 500 nm |
| Conversion Efficiency | Up to 40% (Signal + Idler) |
| Pump Compatibility | Nd:YAG (266/355/532/1064 nm), including third-harmonic 355 nm |
| Nonlinear Crystal | BBO (broadband, pre-screened & certified) |
| Control Interface | PC-based automated software with real-time parameter logging and remote operation capability |
| Enclosure | Hermetically sealed, compact OEM-grade housing |
| Lifetime | >1 × 10⁶ shots (BBO crystal & optics qualified per MIL-STD-883 optical aging protocols) |
| Key | Origin: Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HT-CRE-30 |
| Quotation | Upon Request |
| Max Test Load | 5–30 kN |
| Temp Range (Standard) | 300–900 °C |
| Max Temp | 1000 °C |
| Optional | High-Temp Creep Extensometer |
| Brand | Huiyan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Model | HY-C22FA / HY-C26FB |
| Frequency | 2.45 GHz |
| Waveguide Interface | BJ-22 (WR-430) / BJ-26 (WR-340) |
| Isolation | >20 dB |
| Insertion Loss (Forward) | ≤0.3 dB |
| VSWR | <1.2:1 |
| Power Handling | 2 kW – 15 kW |
| Cooling | Forced Water Cooling |
| Load Type | Integrated Water Load |
| Compliance | IEC 61000-4, MIL-STD-461E (EMI), RoHS |
| Brand | Huiyan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HY-W22FAQ |
| Quotation | Available Upon Request |
| Microwave Frequency | 2.45 GHz |
| Waveguide Interface | BJ-26 / BJ-22 |
| VSWR | ≤1.05 |
| Detection Port | N-Type / L16 |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HC-5000 |
| Pricing | Upon Request |
| Max Operating Pressure | 5,000 psi |
| Max Flow Rate | 950 mL/min |
| Feed Temperature Range | –15–165 °F (–26–74 °C) |
| Compressed Air Requirement | 28 SCFM at 50 psi, Dew Point: –17.7–1.6 °C |
| Minimum Sample Volume | 100 mL |
| Dimensions | 44 × 44 × 51 cm |
| Weight | 16.8 kg |
| Construction Material | Electropolished 316 Stainless Steel |
| Brand | Acmer |
|---|---|
| Model | LSP-B01H2 |
| Type | Micro-syringe Pump |
| Flow Rate Range | 1.426 nL/min to 30.41 mL/min |
| Accuracy | ±0.5% |
| Repeatability | ±0.05% |
| Display | 5-inch HD Touchscreen |
| Calibration | User-performed syringe calibration with parameter storage |
| Control Interface | RS485 or USB (configurable address & baud rate) |
| External Control | TTL-compatible digital input (5–24 V DC or dry contact) |
| Status Outputs | Real-time run/stop and direction signals |
| Power Recovery | Auto-resume from last operational state after power interruption |
| Key | Origin: Japan |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | High-Speed Impact Testing Machine (Hydraulic Servo Type) |
| Pricing | Upon Request |
| Max Impact Energy | 5250 J |
| Rated Specimen Absorption Energy | 4500 J |
| Rated Specimen Reaction Force | ±400 kN |
| Loading Velocity Range | ±2 to ±10 m/s |
| Brand | Hefei Kejing |
|---|---|
| Model | SFM-3 |
| Type | High-Speed Vibratory Ball Mill |
| Drive Principle | Eccentric Oscillation with Vertical Vibration |
| Rated Power | 300 W |
| Input Voltage | AC 220 V, Single Phase |
| Oscillation Frequency | 1200 rpm |
| Adjustable Oscillation Time | 0–120 min |
| Standard Jar Capacity | 80 mL (Stainless Steel & Nylon) |
| Optional Jars | Alumina (Al₂O₃), Agate, Vacuum-Sealed Stainless Steel |
| Compatible Grinding Media | Stainless Steel, Zirconia, Alumina, Agate Balls |
| Max Feed Size | ≤ 1 mm |
| Typical Final Particle Size (e.g., Ceramic Powders) | ~0.1 µm |
| Dimensions (L×W×H) | 405 × 365 × 260 mm |
| Net Weight | 40 kg |
| Safety Certification | CE |
| Warranty | 2 Years (excl. jars & grinding media) |
| Operating Environment | Ambient air only — not suitable for inert gas (e.g., Ar) atmospheres |
| Brand | Langbo Instruments |
|---|---|
| Model | GW-3 |
| Heating Surface Options | 300 × 200 mm, 400 × 300 mm, 600 × 400 mm |
| Max Operating Temperature | 450 °C |
| Temperature Uniformity | ±1.5 °C across surface |
| Control Accuracy | ±0.1 °C (setpoint), ±1.0 °C (stability) |
| Heating Rate | Programmable via PID auto-tuning |
| Construction | Isostatically pressed high-purity graphite core with PTFE-coated surface |
| Dual-layer insulation | Air gap + ceramic fiber (aluminosilicate) |
| Compliance | Designed for ISO/IEC 17025-compliant labs |
| Power Supply | Standard 220 V AC, 50 Hz |
| Brand | ALLSHENG (Hangzhou Aosheng) |
|---|---|
| Substrate | Fluorinated Release Liner + Transparent PS Adhesive Layer |
| Total Thickness | 95 µm |
| Width | 80 mm |
| Length | 51 m |
| Part Number | AS-F16R |
| Origin | Zhejiang, China |