Common Laboratory Equipment
Filter
Showing 1141–1170 of 4952 results
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1200C-SLD |
| Max Temperature | 1200 °C (quartz tube), 1100 °C (alloy steel pressure tube) |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 3 kW |
| Heating Rate | up to 50 °C/s (during rapid insertion), 30 °C/s (100–1000 °C under standard ramp) |
| Heating Element | Imported Kanthal A1 resistance wire |
| Control System | Fuzzy PID with auto-tuning + 30-segment programmable controller |
| Configuration | Horizontal sliding rail design for rapid thermal cycling |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1400C |
| Maximum Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 5 kW |
| Heating Rate | ≤10 °C/min below 1200 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Tube Dimensions | Φ60 mm × 1000 mm or Φ80 mm × 1000 mm |
| Furnace Chamber Material | High-Purity Alumina (Al₂O₃) with US-Imported High-Temperature Alumina Coating |
| Cooling System | Dual-layer shell with forced-air cooling |
| Safety Features | Over-temperature and thermocouple failure alarm |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1400C-A |
| Maximum Temperature | 1400 °C (1 hr rating) |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 5.2 kW |
| Heating Rate | ≤10 °C/min below 1000 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Control System | Fuzzy PID with auto-tuning, 30-segment programmable ramp-soak profile, over-temperature and thermocouple break alarms |
| Tube Inner Diameter | Φ80 mm |
| Sealing Options | Clamp-type or hinged flange |
| Safety Features | Integrated pressure relief valve (setpoint adjustable) |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1400C-II |
| Maximum Temperature | 1400 °C |
| Temperature Uniformity | ±1 °C |
| Total Power Rating | 10 kW |
| Heating Rate | ≤10 °C/min up to 1200 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Controller, Over-Temperature & Thermocouple Break Protection |
| Tube Dimensions | Φ60 mm × 1200 mm or Φ80 mm × 1200 mm |
| Furnace Chamber Material | High-Purity Alumina (Al₂O₃) with US-Imported High-Temperature Alumina Coating |
| Cooling | Dual-Layer Shell with Forced-Air Cooling System |
| Structural Support | Integrated Flange Mounting Bracket for Load Distribution |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1400C-III |
| Max Temperature | 1400 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 13 kW |
| Heating Rate | ≤10 °C/min up to 1200 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Control System | Fuzzy PID with auto-tuning, 30-segment programmable controller, over-temperature & thermocouple-failure alarm |
| Tube Dimensions | Φ60 mm × 1200 mm or Φ80 mm × 1200 mm |
| Chamber Material | High-purity Al₂O₃ ceramic tube with US-sourced high-temperature alumina coating |
| Cooling | Dual-layer water-cooled outer shell with forced-air interlayer cooling |
| Compliance | Designed for ISO/IEC 17025-compliant lab environments |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1400C-S |
| Maximum Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 4 kW |
| Heating Rate | ≤10 °C/min below 1200 °C, ≤5 °C/min from 1200–1300 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Controller, Over-Temperature & Thermocouple Failure Protection |
| Tube Inner Diameter | Φ60 mm |
| Chamber Lining Material | High-Purity Alumina (Al₂O₃) with US-Imported High-Temperature Alumina Coating |
| Cooling | Dual-Layer Air-Cooled Housing |
| Structural Design | Flanged Support Bracket for Load Distribution |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1500C |
| Maximum Temperature | 1500 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 2.5 kW |
| Heating Rate (to Max Temp) | ≤10 °C/min |
| Heating Element | Silicon Carbide (SiC) Rods |
| Control System | Fully Automatic PID Controller with Self-Tuning Functionality |
| Thermocouple Type | Type S (Platinum/Rhodium) |
| Over-Temperature & Thermocouple Break Protection | Yes |
| Tube Inner Diameter | Φ50 mm |
| Furnace Tube Material Compatibility | Quartz, Alumina, or Molybdenum (with appropriate vacuum/ambient gas configuration) |
| Insulation | High-Purity Alumina Ceramic Fiber + Dual-Layer Water-Cooled Stainless Steel Shell |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Equipment Type | Horizontal Tube Furnace |
| Maximum Temperature | 1600 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 5.2 kW |
| Heating Rate | ≤10 °C/min below 1200 °C, ≤5 °C/min from 1200–1500 °C, ≤2 °C/min above 1500 °C |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Ramp/Soak Profile, Over-Temperature & Thermocouple Break Protection |
| Tube Dimensions | Φ60 mm × 1000 mm or Φ80 mm × 1000 mm |
| Chamber Lining | High-Purity Al₂O₃ Ceramic Tube with US-Imported High-Temperature Al₂O₃ Coating |
| Cooling | Dual-Layer Air-Cooled Steel Housing |
| Structural Support | Adjustable Flange Mounting Bracket |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1600C-II |
| Maximum Temperature | 1600 °C |
| Temperature Uniformity | ±1 °C |
| Total Power Rating | 11 kW |
| Heating Rate | ≤10 °C/min up to 1200 °C |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with auto-tuning, 30-segment programmable temperature profile, over-temperature and thermocouple failure alarm |
| Tube Dimensions | Φ60 mm × 1200 mm or Φ80 mm × 1200 mm |
| Chamber Lining | High-purity Al₂O₃ ceramic tube with US-sourced high-emissivity alumina coating |
| Cooling | Dual-layer air-cooled shell structure |
| Structural Support | Integrated flange support frame for load distribution |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1700C |
| Maximum Temperature | 1700 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 5.2 kW |
| Heating Rate | ≤10 °C/min below 1200 °C, ≤5 °C/min from 1200–1500 °C, ≤2 °C/min above 1500 °C |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with auto-tuning, 30-segment programmable controller, over-temperature and thermocouple failure alarm |
| Tube Dimensions | Φ60 mm × 1000 mm (ID × effective length) |
| Chamber Lining | High-purity alumina (Al₂O₃) tube with proprietary high-emissivity ceramic coating (imported from USA) |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | 1700°C Dual-Zone High-Temperature Tube Furnace |
| Temperature Range | Up to 1700°C |
| Temperature Uniformity | ±1°C (at setpoint, within 100 mm central zone) |
| Maximum Power | 11 kW |
| Heating Rate | ≤10°C/min below 1200°C, ≤5°C/min from 1200–1500°C, ≤2°C/min above 1500°C |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Ramp/Soak Profile, Over-Temperature & Thermocouple Break Protection |
| Tube Dimensions | Φ60 mm × 1000 mm (ID × Length) |
| Chamber Lining | High-Purity Al₂O₃ Ceramic Tube with US-Imported High-Temperature Aluminum Oxide Coating |
| Cooling | Dual-Layer Air-Cooled Steel Housing |
| Structural Support | Integrated Flange Mounting Bracket for Load Distribution |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1700C-III |
| Max Temperature | 1700 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 13 kW |
| Heating Rate | ≤10 °C/min (≤1200 °C), ≤5 °C/min (1200–1500 °C), ≤2 °C/min (>1500 °C) |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Ramp/Soak, Over-Temperature & Thermocouple Break Protection |
| Tube Dimensions | Φ60 mm × 1000 mm (ID × Length) |
| Chamber Lining | High-Purity Al₂O₃ Ceramic Tube with US-Imported High-Temperature Alumina Coating |
| Cooling | Dual-Layer Air-Cooled Shell Structure |
| Structural Support | Integrated Flange Mounting Bracket for Load Distribution |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1700C-S |
| Maximum Temperature | 1700 °C |
| Temperature Uniformity | ±1 °C |
| Rated Power | 4 kW |
| Heating Rate | ≤10 °C/min (≤1200 °C), ≤5 °C/min (1200–1500 °C), ≤2 °C/min (>1500 °C) |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Ramp/Soak Profile, Over-Temperature & Thermocouple Break Protection |
| Tube Dimensions | Φ60 mm × 800 mm (ID × Length) |
| Chamber Lining | High-Purity Al₂O₃ Ceramic Tube with US-Imported High-Temperature Alumina Coating |
| Cooling | Dual-Layer Air-Cooled Steel Housing |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1750C |
| Maximum Temperature | 1750 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Rate | ≤10 °C/min up to 1400 °C |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Logic Controller, Over-Temperature & Thermocouple Break Protection |
| Tube Dimensions | 100 mm OD × 1300 mm L |
| Insulation | Vacuum-Formed Alumina Fiber Blankets |
| Cooling | Dual-Layer Air-Cooled Housing |
| Structural Support | Dual End Flange Mounting Brackets |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-900C-SS |
| Maximum Temperature | 900 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 280 W |
| Heating Rate (to Max Temp) | 10 °C/min |
| Heating Method | Resistance Wire Heating |
| Control System | Fuzzy PID + Auto-Tuning |
| Programmable Stages | 30-segment Intelligent Ramp/Soak |
| Safety Features | Over-Temperature & Thermocouple Break Alarms |
| Tube Inner Diameter | Φ25 mm |
| Hot Zone Length | 90 mm |
| Furnace Liner Material | High-Purity Alumina Fiber |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MF-1200C |
| Instrument Type | Box-Type Muffle Furnace |
| Max. Operating Temperature | 1200°C |
| Continuous Service Temperature | 1100°C |
| Temperature Uniformity | ±2°C (within 80×80×80 mm zone at 1100°C) |
| Control Accuracy | ±1°C |
| Max. Heating Rate | 30°C/min |
| Rated Power | 4 kW |
| Internal Chamber Dimensions | 300 × 200 × 120 mm (7.2 L) |
| External Dimensions | 435 × 550 × 540 mm |
| Net Weight | 53 kg |
| Heating Element | Molybdenum-Doped Alloy Resistance Wire |
| Insulation Material | Vacuum-Formed High-Purity Alumina Fiber |
| Cooling System | Dual-Layer Air-Cooled Shell |
| Safety Features | Door-Interlocked Power Cut-off, Dual Mechanical Latches, Over-Temperature & Thermocouple Break Alarms |
| Controller | 30-Stage Programmable PID with Auto-Tuning, RS485 Communication Port (optional LabVIEW integration), Touchscreen Interface (optional upgrade) |
| Certifications | CE Compliant |
| Warranty | 12 months full unit coverage |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MF-1200C-L |
| Instrument Type | Box-Type Muffle Furnace |
| Max Temperature | 1200°C |
| Operating Temperature Range | ≤1100°C |
| Temperature Control Accuracy | ±1°C |
| Rated Power | 4 kW (Note: 6 kW listed in description refers to peak/derated capacity |
| Heating Rate (to max temp) | 5–20°C/min |
| Heating Element | Kanthal A1 Resistance Wire |
| Chamber Dimensions | 250 × 300 × 250 mm (L×W×H) |
| Nominal Volume | 64 L |
| External Dimensions | 670 × 630 × 1010 mm |
| Net Weight | 143 kg |
| Gross Weight | 172 kg |
| Voltage | AC 208–240 V, Single Phase, 50/60 Hz |
| Thermocouple | Type K |
| Control System | 30-Stage Programmable PID with Auto-Tuning, Over-Temperature & Thermocouple Break Protection |
| Insulation | Multi-Layer Alumina Fiber (Vacuum-Formed), High-Purity Al₂O₃ Liner |
| Cooling | Dual-Wall Air-Cooled Jacket with Integrated Air Channel |
| Safety Certification | CE-compliant |
| Optional Certifications | UL 61010 (TUV or CSA, fee-based) |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Target Market | Domestic (China) |
| Target Applications | SEM Sample Preparation |
| Sputtering Target Diameter | 58 mm |
| Sample Stage Diameter | 40 mm (accommodates up to six standard sample cups) |
| Chamber Dimensions | Ø100 mm × 130 mm (height) |
| Vacuum System | Direct-coupled two-stage rotary vane pump (RVD-2), pumping speed: 2 L/s, ultimate pressure: 5 × 10⁻² Pa |
| Vacuum Gauge | Pirani gauge |
| Process Gas Options | Air or high-purity argon (dedicated Ar inlet with fine-flow micro-regulation valve) |
| Operating Pressure Range | Adjustable from ~1–20 Pa via precision bleed valve |
| Safety Interlock | Automatic cutoff at 20 Pa chamber pressure |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | VGT-1990QTD |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power | 200 W |
| Adjustable Temperature Range | 0–80 °C |
| Timer Range | 1–99 min (LED digital display) |
| Tank Capacity | 9 L |
| Internal Tank Dimensions | 300 × 240 × 150 mm (L×W×H) |
| External Dimensions | 330 × 270 × 310 mm (L×W×H) |
| Drain Valve | Yes |
| Heating System | Ceramic heater |
| Construction | Stainless steel SUS304 tank and housing |
| Transducer Configuration | Four 50 W piezoelectric transducers (total 200 W) |
| Basket Material | Welded SUS304 mesh basket (optional) |
| PCB Protection | Moisture- and corrosion-resistant coating |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | VTF-1200C-S-III-D50 |
| Instrument Type | Vertical Tube Furnace |
| Max Temperature | 1200 °C |
| Continuous Operating Temperature | ≤1100 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Heating Rate (to max temp) | ≤10 °C/min |
| Heating Element | Resistance Wire |
| Thermocouple Type | K-Type |
| Control Method | Intelligent Fuzzy PID with Auto-Tuning & 30-Stage Programmable Ramp/Soak |
| Total Power | ≤4 kW |
| Heating Zone Length | 240 mm |
| Internal Chamber Dimensions (L×W×H) | 950×800×1200 mm |
| Unit Weight | ~100 kg |
| Insulation Material | Lightweight Alumina Fiber |
| Brand | Berghof |
|---|---|
| Origin | Germany |
| Model | BSB-939-IR |
| Instrument Type | Sub-boiling Distillation Apparatus |
| Construction Materials | TFM-PTFE, PTFE, and PFA only (no quartz or metal components) |
| Application | Ultra-high-purity acid production for trace elemental analysis |
| Brand | Berghof |
|---|---|
| Origin | Germany |
| Model | SW-Xpert |
| Cavity Class | Industrial-Grade |
| Sample Capacity | 32 vessels |
| Microwave Source | Dual Magnetron |
| Max Temperature | 300 °C |
| Max Pressure | 1450 psi |
| Output Power | 2000 W |
| Compliance | FDA 21 CFR Part 11, ISO/IEC 17025-compatible workflows, GLP/GMP-ready audit trail |
| Brand | Berghof |
|---|---|
| Origin | Germany |
| Model | Speedwave Xpert |
| Cavity Class | Industrial-Grade |
| Sample Capacity | 32 vessels |
| Microwave Source | Dual Magnetron |
| Max Temperature | 300 °C |
| Max Pressure | 1450 psi |
| Output Power | 2000 W |
| Compliance | FDA 21 CFR Part 11 |
| Brand | Berghof |
|---|---|
| Origin | Germany |
| Model | SW-Entry |
| Cavity Class | Industrial-grade |
| Sample Capacity | 24 vessels |
| Microwave Source | Single Magnetron |
| Max Temperature | 230 °C |
| Max Pressure | 75 bar |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | BD Series Microbiological Incubator |
| Temperature Range | Ambient +5 °C to 100 °C |
| Safety Class | Independent Adjustable Temperature Safety Device, Class 3.1 (DIN 12880) |
| Heating Technology | APT.line™ Preheating Chamber |
| Air Circulation | Free Convection |
| Door | Inner Door Made of Tempered Safety Glass (ESG) |
| Shelving | 2 Chrome-Plated Adjustable Shelves |
| Stackable Configuration | Up to 115 L Total Volume |
| Exhaust Valve | Adjustable with Timer Function |
| Controller | Microprocessor-Based with Time Function |
| Interface | RS 422 Serial Port |
| Internal Volume | 20 L (BD23) / 400 L (BD400) |
| External Dimensions (W×H×D mm) | 435×495×520 (BD23) / 1235×1025×765 (BD400) |
| Internal Dimensions (W×H×D mm) | 222×330×277 (BD23) / 1000×800×500 (BD400) |
| Net Weight | 27 kg (BD23) / 135 kg (BD400) |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | E28 |
| Instrument Type | Standard Drying Oven |
| Temperature Range | 60 °C to 230 °C |
| Temperature Uniformity | ±0.5 °C (at 150 °C, steady state) |
| External Dimensions (W×H×D) | 580 × 405 × 425 mm |
| Internal Chamber Dimensions (W×H×D) | 400 × 280 × 250 mm |
| Internal Volume | 28 L |
| Net Weight (empty) | 22 kg |
| Max. Load Capacity | 25 kg |
| Max. Load per Shelf | 10 kg |
| Heating Method | Forced Air (Natural Convection with Fan-Assisted Preheating via APT.line™) |
| Recovery Time after 30-sec Door Opening (at 150 °C) | ≤19 min |
| Heating Time to 150 °C | ≤36 min |
| Rated Power | 0.8 kW (120 V / 230 V) |
| Shelves Supplied | 2 chrome-plated adjustable shelves |
| Timer Range | 0–120 min |
| Safety Device | Temperature Safety Controller Class 1 (DIN 12880) |
| Exhaust Valve | Adjustable mechanical damper |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | ED Series |
| Temperature Range | Ambient + 5 °C to 300 °C |
| Temperature Uniformity (at 150 °C) | ±0.4 K to ±0.8 K |
| Internal Dimensions (W×H×D) | 960 × 1280 × 605 mm |
| External Dimensions (W×H×D) | 1165 × 1590 × 870 mm |
| Interior Volume | 743 L |
| Net Weight (empty) | 169 kg |
| Max. Load Capacity | 315 kg |
| Max. Load per Shelf | 45 kg |
| Heating Method | Natural Convection |
| Power Supply (230 V) | up to 2.25 kW |
| Power Supply (400 V) | 4.1 kW |
| Shelving | 2 standard / up to 16 stainless steel chrome-plated shelves |
| Safety | Dual-stage independent temperature safety device (DIN 12880 Class 2), optical alarm |
| Interface | USB port for data logging |
| Compliance | DIN 12880, EN 61000-6-3, EN 61000-6-4, CE |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | ED-S Solid.Line |
| Instrument Type | Standard Drying Oven |
| Temperature Range | Ambient +7 °C to 250 °C |
| Temperature Uniformity | ±0.8 °C |
| External Dimensions (W×H×D) | 614 × 625 × 577 mm |
| Internal Dimensions (W×H×D) | 400 × 440 × 350 mm |
| Internal Volume | 62 L |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Technology | APT.line™ Preheating Chamber Technology |
| Air Circulation | Natural Convection (Free Convection) |
| Safety | Independent Adjustable Temperature Safety Device, Class 2 (DIN 12880), Optical Alarm |
| Controller | Time-Programmable Digital Controller |
| Accessories | 2 Chrome-Plated Wire Shelving Inserts |
| Exhaust Valve | Adjustable |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | ED-S 56 / ED-S 115 |
| External Dimensions (W×H×D, mm) | 590×580×515 (ED-S 56) / 740×790×555 (ED-S 115) |
| Internal Dimensions (W×H×D, mm) | 400×440×350 (ED-S 56) / 550×550×390 (ED-S 115) |
| Interior Volume | 62 L / 118 L |
| Net Weight (empty) | 41 kg / 57 kg |
| Temperature Range | Ambient +7 °C to 250 °C |
| Temperature Uniformity at 150 °C | ±2.8 K |
| Temperature Fluctuation at 150 °C | ±0.8 K |
| Heating Time to 150 °C | 60 min / 55 min |
| Power Consumption at 150 °C | 180 Wh/h / 310 Wh/h |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | ED/FD Series |
| Heating Principle | Natural Convection (ED) / Forced Air Convection (FD) |
| Temperature Range | Ambient +5 °C to 300 °C |
| Control System | Microprocessor-based with LED Display & Integrated Timer (0–99 h 59 min or continuous) |
| Safety Class | DIN 12880 Compliant, Dual-Level Thermal Protection (TWB) |
| Chamber Materials | High-Performance Stainless Steel (AISI 304), Electrogalvanized Steel Enclosure with Corrosion-Resistant Coating |
| Chamber Volumes | 23 L, 53 L, 115 L, 240 L, 400 L, 720 L |
| Interface | RS422 for APT-COM Data Management Software (Optional) |
| Interior Design | Rounded Corners, Smooth Welded Surfaces, Removable Shelving, Tempered Glass Inner Door |
| Insulation | Advanced Low-Conductivity Mineral Wool |
| Surface Finish | Anti-Dust Powder Coating |