Common Laboratory Equipment
Filter
Showing 16621–16650 of 17424 results
| Brand | YIHENG |
|---|---|
| Model | BRE-05 / BRE-10 / BRE-20 / BRE-50 |
| Capacity | 5 L / 10 L / 20 L / 50 L |
| Rotation Speed | 20–140 rpm |
| Temperature Control Accuracy | ±1 °C |
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Heating Mode | Water Bath (Standard) / Oil Bath (Optional) |
| Safety Features | Dry-run Protection, Dual-Temperature Limit Alarm, PTFE-Sealed Vacuum System, Teflon Drain Valve, Motorized Lift Mechanism, Flame-Retardant Bath Housing, Touch-Safe External Surface Temperature |
| Brand | Yiheng |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Pump Type | Circulating Water Vacuum Pump |
| Oil Requirement | Oil-Free (Water-Sealed) |
| Ultimate Vacuum | –0.098 MPa (2 kPa abs) |
| Pumping Speed (per head) | 10 L/min |
| Dual-Head Configuration | Yes |
| Flow Rate | 80 L/min |
| Head | 10 m |
| Water Tank Capacity | 15 L |
| Tank Material | Polypropylene (PP) |
| Dimensions (W×D×H) | 385 × 280 × 420 mm |
| Weight | 11 kg |
| Motor Power | 180 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Safety Feature | Integrated Check Valve |
| Chemical Resistance | Acid-, alkali-, and solvent-resistant |
| Noise Reduction | Fluid-damped silencer |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Instrument Type | Box Furnace |
| Maximum Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Rate (to Max Temp) | ≤45 °C/min |
| Heating Element | Fe-Cr-Al Alloy Resistance Wire |
| Internal Dimensions | Model-Dependent |
| Nominal Volume | Model-Dependent |
| Brand | YIHENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Instrument Type | Box Furnace |
| Max Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 2.5 kW |
| Heating Rate (to max temp) | ≤45 °C/min |
| Heating Element | Fe-Cr-Al Alloy Resistance Wire |
| Internal Chamber Dimensions | 200 × 120 × 80 mm |
| Nominal Volume | 2 L |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | BSX2-5-12TP |
| Instrument Type | Box Furnace |
| Max Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 3000 W |
| Heating Rate (to max temp) | ≤45 °C/min |
| Heating Rate (300–1000 °C) | ≥5 °C/min |
| Heating Element | Fe-Cr-Al Alloy Resistance Wire |
| Internal Chamber Dimensions | 200 × 300 × 120 mm |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model Variants | BWS-5, BWS-10, BWS-20, BWS-0505, BWS-0510 |
| Heating Power | 1200 W |
| External Dimensions (W×D×H) | 550 × 360 × 280 mm |
| Construction | One-Piece Stainless Steel Inner Tank, ABS Outer Housing |
| Safety Features | Dry-run Protection (Manual Reset), Independent Over-Temperature Cut-off, High-Temperature Alarm, Low-Water Detection |
| Display | LCD with Multi-Parameter On-Screen Readout, Menu-Driven Interface, Built-in Timer |
| Optional Accessories | Multi-Stage Programmable Controller, Transparent Acrylic Lid, Conical Flask Holders, Adjustable Beaker Racks, Angular Stainless Steel Lid |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | BWS Series |
| Instrument Type | Water Bath / Oil Bath |
| Circulation | None |
| Temperature Control | Heating-Only |
| Bath Volume | Model-Dependent |
| Temperature Range | RT+5°C to 99°C |
| Temperature Stability | ±0.3°C |
| Input Power | As per Datasheet |
| Voltage | AC 220 V, 50 Hz |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | BWS-10 |
| Instrument Type | Constant-Temperature Bath |
| Circulation Mode | Internal Recirculation |
| Temperature Control | Heating-Only |
| Bath Chamber Dimensions (L×W×H) | 300 × 240 × 150 mm |
| Temperature Range | RT+5 °C to 99 °C |
| Input Power | 600 W |
| Supply Voltage | AC 220 V, 50 Hz |
| Safety Features | Dry-run Protection, Independent Over-Temperature Alarm, Deviation Alert (High/Low) |
| Construction | One-Piece Stainless Steel Inner Tank |
| Display | LCD with Multi-Parameter On-Screen Readout |
| Interface | Menu-Driven Operation with Timer Function |
| Optional Accessories | Multi-Stage Programmable Controller, Conical Cap (Vapor-Resistant), Test Tube Holder Kit, Adjustable Beaker Aperture Plate, Removable Stainless Steel Mesh Shelf |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | BWS-5 |
| Power Supply | AC 220 V, 50 Hz |
| Heating Power | 500 W |
| Temperature Range | RT+5 °C to 99 °C |
| Temperature Stability | ±0.5 °C |
| Alarm Threshold | ±2 °C |
| Inner Chamber Dimensions (W×D×H) | 130 × 280 × 150 mm |
| Timer Range | 1–999 min |
| Optional Accessories | Evaporation-Resistant Conical Lid, Test Tube Holder, RS-485/USB Data Export, Microprinter Interface |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | BWS-Series |
| Instrument Type | Constant-Temperature Bath |
| Circulation Function | None |
| Temperature Control Mode | Heating-Only |
| Bath Capacity | 11 L / 20 L |
| Temperature Range | RT+5°C to 100°C / RT+5°C to 80°C |
| Temperature Resolution | 0.1°C |
| Input Power | 800 W / 1000 W |
| Power Supply | AC 220 V, 50 Hz |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Models | CU-420, DK-8AXX, DKB-600B, TS-030, DK-8D |
| Price Range | USD 260 – 500 (FOB Shanghai) |
| Instrument Type | Heating-Only Constant-Temperature Bath |
| Circulation Mode | Internal Recirculation Only |
| Bath Volume | Model-Dependent (CU-420: ~12 L total |
| DKB-600B | ~60 L total |
| TS-030 | ~30 L total) |
| Temperature Range | RT+5°C to 99°C (CU-420, DKB-600B, TS-030) |
| Temperature Resolution | 0.1°C |
| Power Input | Model-Dependent (CU-420: 800 W |
| DKB-600B | 2200 W |
| TS-030 | 1500 W) |
| Supply Voltage | AC 220 V, 50 Hz |
| Control System | Microprocessor-Based Digital PID Controller with Timer Function |
| Safety Features | Over-Temperature Audible/Visual Alarm with Independent Thermal Cut-Out |
| Construction | 304 Stainless Steel Inner Tank and Lid |
| Configuration | Three Independent Temperature-Controlled Compartments |
| Optional Feature | Multi-Stage Programmable Controller (PID-based, up to 30 segments) |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model Series | CU/DK/DKB/TS |
| Instrument Type | Constant-Temperature Circulating Bath |
| Circulation Mode | Internal Circulation Only |
| Temperature Control | Heating-Only |
| Bath Volume | Model-Dependent |
| Temperature Range | Model-Dependent |
| Temperature Stability | Model-Dependent |
| Temperature Resolution | 0.1 °C |
| Input Power | Model-Dependent |
| Power Supply | AC 220 V, 50 Hz |
| Optional Feature | Multi-Stage Programmable Controller |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Instrument Type | General-Purpose Drying Oven |
| Temperature Range | RT+10°C to 200°C |
| Temperature Uniformity | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Working Ambient Temperature | +5°C to +35°C |
| Chamber Volume Options | 27 L, 56 L, 96 L |
| Inner Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Natural Convection |
| Compliance | Designed for GLP-compliant laboratories |
| Optional Features | RS485 Interface, Thermal Printer Output, Multi-Stage Programmable Controller (7 Programs × 9 Steps Each, Max 5999 min/Step) |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Line | DHG Series |
| Instrument Type | High-Temperature Drying Oven |
| Temperature Range | RT+10°C to 200°C |
| Temperature Uniformity | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Internal Chamber Dimensions (W×D×H) | 320 × 300 × 355 mm |
| External Dimensions (W×D×H) | 460 × 520 × 660 mm |
| Operating Ambient Temperature | +5°C to +35°C |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Natural Convection (Gravity-Driven Airflow) |
| Optional Accessories | RS485 Communication Interface, Thermal Printer Output, Multi-Stage Programmable Controller (7 Programs × 9 Steps Each, Max. Step Duration: 5999 min) |
| Brand | Yiheng |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Region | Domestic (China) |
| Models | DHG-150-2B, DHG-100-4B |
| Price Range | USD 1,890–3,340 (approx.) |
| Oven Type | General-Purpose Forced-Air Drying Oven |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 250°C |
| Temperature Fluctuation | ±1°C |
| External Dimensions | 705×740×1800 mm / 1220×616×1620 mm |
| Control Range | RT+10°C to 200°C / RT+10°C to 250°C |
| Chamber Configuration | Dual or Quad Independent Chambers |
| Temperature Resolution | 0.1°C |
| Interior Material | 304 Stainless Steel |
| Heating Method | Forced-Air Circulation |
| Temperature Uniformity | ±2.5°C (at 100°C test point) |
| Optional Features | Independent Over-Temperature Cut-Off, RS485 Interface, Thermal Printer Output |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9000 Series |
| Temperature Range | RT+10°C to 300°C |
| Temperature Uniformity | ±1.0°C |
| Resolution | 0.1°C |
| Volume Options | 16–1000 L |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Timer Range | 1–9999 min |
| Construction | Mirror-finish stainless steel inner chamber (A-models) or galvanized steel (non-A models) |
| Standard Shelving | 2–4 adjustable stainless steel trays |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9000 Series |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 250°C (specify at order) |
| Temperature Uniformity | ±3% (at 100°C) |
| Temperature Fluctuation | ±1.0°C |
| Temperature Resolution | 0.1°C |
| Chamber Dimensions (W×D×H, mm) | 340×320×320 to 1000×600×1600 |
| External Dimensions (W×D×H, mm) | 620×530×490 to 1140×800×2150 |
| Capacity | 30 L to 1000 L |
| Power Supply | AC 220 V / 380 V, 50 Hz |
| Input Power | 850 W to 6000 W |
| Standard Shelving | 2–4 stainless steel trays |
| Timer Range | 1–9999 minutes |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9000 |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 250°C |
| Temperature Fluctuation | ±1.0°C |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | +5°C to +40°C |
| Inner Chamber Material | Mirror-Finish Stainless Steel (AISI 304) |
| Heating Method | Forced-Air Convection |
| Temperature Uniformity | ±3% at 100°C |
| Control System | Microprocessor-Based P.I.D. Controller with Over-Temperature Deviation Protection and Timer Function |
| Optional Features | Independent Over-Temperature Cut-Off Alarm System |
| Optional Connectivity | RS485 Interface or Thermal Printer Port |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Instrument Type | General-Purpose Drying Oven |
| Temperature Range | RT+10°C to 200°C |
| Temperature Uniformity | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Interior Material | Stainless Steel (304) |
| Heating Method | Natural Convection (No Forced Air Circulation) |
| Chamber Geometry | Rounded Corner Design (Internal Radius ≥ R15 mm) |
| Control System | Microprocessor-Based P.I.D Controller with Digital Display and Timer Function |
| Optional Features | Independent Over-Temperature Cut-off Protection |
| Max Step Duration | 5999 min) |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9003 Series |
| Instrument Type | General-Purpose Laboratory Drying Oven |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 250°C |
| Temperature Fluctuation | ±1°C |
| Temperature Uniformity | ±3% |
| Temperature Resolution | 0.1°C |
| Chamber Material | Mirror-Finish Stainless Steel (AISI 304) |
| Exterior Material | Cold-Rolled Steel with Powder-Coated Finish |
| Heating Method | Forced Convection via High-Temperature Resistant Circulating Fan |
| External Dimensions (W×D×H, mm) | 530×370×420 |
| Internal Chamber Dimensions (W×D×H, mm) | 250×260×250 |
| Optional Features | Independent Over-Temperature Cut-Off Protection, RS485 Communication Interface, Thermal Printer Output |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9005 Series |
| Instrument Type | General-Purpose Laboratory Drying Oven |
| Temperature Range | RT+10°C to 300°C |
| Temperature Uniformity | ±1.0°C |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | +5°C to +40°C |
| Inner Chamber Material | Mirror-Finish Stainless Steel (AISI 304) |
| Heating Method | Forced-Air Convection System |
| Door Seal | High-Temperature Silicone Gasket |
| Airflow Control | Adjustable Intake/Exhaust Dampers |
| Optional Safety Feature | Independent Over-Temperature Cut-Off Protection |
| Optional Connectivity | RS485 Interface or Thermal Printer Port |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9030A (30 L) |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 250°C |
| Temperature Uniformity | ±3% (at 100°C) |
| Temperature Fluctuation | ±1.0°C |
| Temperature Resolution | 0.1°C |
| Chamber Dimensions (W×D×H) | 340×320×320 mm |
| External Dimensions (W×D×H) | 620×440×490 mm |
| Interior Material | Mirror-Finish Stainless Steel |
| Heating Method | Forced-Air Circulation |
| Power Input | 850 W |
| Operating Ambient Temperature | +5°C to +40°C |
| Standard Shelving | 2 stainless steel trays |
| Timer Range | 0–9999 minutes |
| Brand | Yiheng |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Models | DHG-9030T, DHG-9035T, DHG-9050T, DHG-9055T |
| Temperature Range | RT+10°C to 200°C (250°C) / RT+10°C to 300°C |
| Temperature Fluctuation | ±1.0°C |
| External Dimensions (W×D×H) | 620×440×490 mm |
| Internal Chamber Dimensions (W×D×H) | 340×320×320 mm |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ±1.5% (at 100°C test point) |
| Control System | 4.3-inch capacitive touchscreen interface with multi-segment programmable logic |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9070A |
| Capacity | 80 L |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 250°C |
| Temperature Uniformity | ±3% |
| Temperature Fluctuation | ±1.0°C |
| Temperature Resolution | 0.1°C |
| Interior Dimensions (W×D×H) | 450×400×450 mm |
| Exterior Dimensions (W×D×H) | 740×618×630 mm |
| Interior Material | Mirror-Finish Stainless Steel |
| Heating Method | Forced-Air Circulation |
| Operating Ambient Temperature | +5°C to +40°C |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 2050 W |
| Standard Shelving | 3 stainless steel trays |
| Optional Accessories | Multi-segment programmable controller, embedded thermal printer, independent over-temperature cut-off system, RS485 interface with data logging software |
| Brand | Yiheng |
|---|---|
| Model | DHG-9140A |
| Origin | Shanghai, China |
| Temperature Range | RT+10 °C to 200 °C / RT+10 °C to 250 °C |
| Temperature Uniformity | ±3% at 100 °C |
| Temperature Fluctuation | ±1.0 °C |
| Temperature Resolution | 0.1 °C |
| Chamber Dimensions (W×D×H) | 550 × 450 × 550 mm |
| External Dimensions (W×D×H) | 840 × 580 × 730 mm |
| Interior Material | Mirror-Finish Stainless Steel |
| Heating Method | Forced-Air Convection |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 2050 W |
| Operating Ambient Temperature | +5 °C to +40 °C |
| Standard Shelving | 4 Adjustable Stainless Steel Trays |
| Optional Accessories | Multi-Stage Programmable Controller, RS485 Interface, Embedded Thermal Printer, Independent Over-Temperature Cut-Off System |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9240A |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 250°C |
| Temperature Uniformity | ±3% (at 100°C) |
| Temperature Fluctuation | ±1.0°C |
| Temperature Resolution | 0.1°C |
| Chamber Dimensions (W×D×H) | 600×500×750 mm |
| External Dimensions (W×D×H) | 880×630×930 mm |
| Inner Chamber Material | Mirror-Finish Stainless Steel |
| Heating Method | Forced-Air Circulation |
| Operating Ambient Temperature | +5°C to +40°C |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 2450 W |
| Standard Shelving | 4 Adjustable Stainless Steel Trays |
| Timer Range | 1–9999 minutes |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9420A (420 L Capacity) |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 250°C |
| Temperature Uniformity | ±3% |
| Temperature Fluctuation | ±1.0°C |
| Temperature Resolution | 0.1°C |
| Chamber Dimensions (W×D×H) | 640 × 585 × 1355 mm |
| External Dimensions (W×D×H) | 780 × 750 × 1880 mm |
| Inner Chamber Material | Mirror-Finish Stainless Steel |
| Heating Method | Forced-Air Circulation |
| Operating Ambient Temperature | +5°C to +40°C |
| Power Supply | AC 220 V / 50 Hz (Standard), Optional AC 380 V / 50 Hz |
| Input Power | 3100 W |
| Standard Shelving | 2 adjustable stainless steel trays |
| Timer Range | 1–9999 minutes |
| Compliance | Designed per IEC 61010-1 for laboratory electrical safety |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | DHP-9000 Series (Dual-Function Incubator & Drying Oven) |
| Instrument Type | General-Purpose Forced-Air Oven |
| Temperature Range | Incubation Mode: RT+5°C to 80°C |
| Drying Mode | 80°C to 220°C |
| Temperature Uniformity | ±0.5°C (Incubation), ±1.0°C (Drying) |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | +5°C to +35°C |
| Interior Material | Mirror-Finish Stainless Steel (AISI 304) |
| Heating Method | Natural Convection with Forced Warm-Air Circulation |
| Door Seal | High-Efficiency Silicone Rubber Gasket |
| Viewing Window | Double-Layer Tempered Glass |
| Safety Interlock | Automatic Cut-off of Heating and Air Circulation Upon Door Opening |
| Interior Dimensions | See Manufacturer’s Technical Brochure |
| External Dimensions | See Manufacturer’s Technical Brochure |
| Pricing Range | USD 520 – 1,470 (FOB Shanghai) |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DHP-9082 |
| Power Supply | AC 220 V, 50 Hz |
| Temperature Range | RT + 5 °C to 65 °C |
| Temperature Resolution / Stability | 0.1 °C / ±0.5 °C |
| Temperature Uniformity | ±1.5 °C at 37 °C |
| Working Ambient Temperature | +5 °C to +35 °C |
| Input Power | 1300 W |
| Chamber Volume | 80 L |
| Interior Dimensions (W×D×H) | 500 × 400 × 400 mm |
| Exterior Dimensions (W×D×H) | 780 × 530 × 560 mm |
| Standard Shelving | 4 adjustable stainless steel shelves |
| Control System | Microprocessor-based PID controller with timer (max 99 h 59 min) |
| Optional Features | Independent over-temperature alarm, UV sterilization module, RS485 interface, thermal printer output, multi-segment programmable controller (15 segments, 30 steps) |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DK-8AB |
| Instrument Type | Water/Oil Bath Thermostatic Tank |
| Circulation Mode | Internal Circulation |
| Temperature Control | Heating-Only |
| Bath Volume | 22 L |
| Temperature Range | RT+5°C to 70°C |
| Temperature Stability | ±0.5°C (within specified range) |
| Input Power | 1000 W |
| Supply Voltage | AC 220 V, 50 Hz |
| Display & Control | Digital Microprocessor-Based Controller with Timer Function |
| Safety Features | Over-Temperature Audio-Visual Alarm |
| Construction | Stainless Steel Inner Chamber and Lid |
| Configuration | Triple Independent Baths with Individual Temperature Zones |
| Optional | Multi-Stage Programmable Controller with Adjustable Pump Speed and Scheduled On/Off Timing |