Common Laboratory Equipment
Filter
Showing 2551–2580 of 17669 results
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | BR-4000 |
| Vessel Capacity | 4 L |
| Maximum Operating Pressure | 150 bar (2175 psig) |
| Maximum Design Temperature | 300 °C (PTFE-lined: 230 °C) |
| Construction Material | ASTM A240 UNS S31603 Ti-stabilized stainless steel (1.4571) or Hastelloy® C-276 |
| Sealing System | Quick-release clamp with LC-KEY safety interlock |
| Stirring Configuration | Top-driven magnetic coupling seal with optional bottom-mounted magnetic stirrer for smaller volumes |
| Pressure Relief | Certified rupture disk (standard), optional pressure relief valve, pressure transducer, and vent valve |
| Temperature Control | Integrated heating mantle (CHM-4000) or oil-jacketed heating/cooling system (CTM-4000) |
| Compliance | ASME BPVC Section VIII Div. 1 design basis |
| Sealing Materials | PTFE (≤230 °C), FFKM (≤300 °C) |
| Accessories | Constant-pressure addition funnel, high-pressure syringe pump, sampling valve, thermowell, pressure gauge, digital controller interface |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | BR-500/1000/2000 |
| Working Pressure | Up to 200 bar (2900 psig) |
| Volume Capacity | 500–2000 mL |
| Construction Material | SS316Ti or Hastelloy C |
| Max Operating Temperature | 300 °C (230 °C with PTFE liner) |
| Sealing System | Quick-release clamp with LC-KEY safety interlock |
| Stirring | Bottom-mounted magnetic stirrer (BR-500) |
| Standard Safety Features | Rupture disc, pressure relief valve, nitrogen leak-tested |
| Optional Accessories | Constant-pressure addition funnel, high-pressure syringe pump, sampling unit, JULABO heating jacket, digital pressure transducer |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | Camera |
| Material | SS 316 Ti |
| Max. Working Pressure | 50 bar (725 psi) |
| Max. Temperature | 300 °C (230 °C with FPM seals) |
| Volume Range | 1200–6000 mL |
| Standard Volume | 1800 mL |
| Vacuum/Pressure Rating | –1 to +25 bar (gauge) |
| Viewing Windows | Two opposing quartz windows (Ø21 mm) with integrated LED illumination |
| Explosion Protection | Ex d IIB T4 or higher (Zones 0, 1) |
| Stirring System | Magnetic coupling drive (RV 100, 100 N·cm torque, 300 °C rated, max. viscosity 4000 mPa·s) |
| Pressure Monitoring | Intrinsically safe pressure transducer (25 bar, SS 316 L) |
| Temperature Sensing | ATEX-certified Pt-100 (250 mm × 1.5 mm sheath) |
| Seals | FPM (Viton) or optional FFKM (Perlast) O-rings |
| Safety Components | Monel rupture disc (20 bar, PFA-coated, certified) |
| Jacket Type | Double-wall circulation jacket for external heating/cooling |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | CC15 Lite |
| Reactor Volume | 1.25 L |
| Total Length | 7 m |
| Nominal Flow Rate | 40 mL/min |
| Typical Residence Time | 30 min |
| Dimensions (W×D×H) | 1110 × 800 × 1010 mm |
| Tube Diameter | DN15 |
| Temperature Control | External Sleeve/Optional Jacketed Bend |
| Compliance | Designed for GLP-compliant lab-scale process development |
| Sample Compatibility | Solid–liquid–gas multiphase systems |
| Interface Options | Integrated ports for PAT tools (e.g., inline Raman, ATR-FTIR, FBRM), multi-point sampling, and auxiliary feed modules |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | Chem 4 |
| Temperature Range | −30 °C to 180 °C |
| Reaction Positions | 4 |
| Reaction Volume Capacity | 2 mL–400 mL |
| Vessel Compatibility | Borosilicate 3.3 glass or PTFE contact materials |
| Control Interface | Integrated touchscreen panel with embedded calorimetric modeling and real-time data logging |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | CR-300 |
| Vessel Capacity | 30 mL – 5 L |
| Maximum Operating Pressure | 100 bar |
| Maximum Temperature | 300 °C (stainless steel) / 230 °C (with PTFE liner) |
| Construction Material | High-grade stainless steel (e.g., 316Ti, 1.4571) |
| Sealing Options | Viton®, PTFE, Kalrez® O-rings |
| Heating Options | Electric heating jacket, JULABO oil-bath jacket, or heating/cooling coil |
| Stirring | Bottom magnetic stirring (BLH800/BLH801) or top-driven mechanical stirring with magnetic coupling shaft seal (e.g., WB20C/18C series) |
| Safety Features | Rupture disc, pressure relief valve, temperature sleeve, dual 8 mm auxiliary ports, chain-type quick-release clamp |
| Compliance | Designed for GLP/GMP-aligned laboratory environments |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Model | CSC.4 / CSC.6 |
| Ultimate Vacuum | 2–4 mbar |
| Maximum Flow Rate | 34 L/min |
| Power Consumption | 245 W |
| Inlet/Outlet Port OD | 10 mm |
| Control System | Digital Programmable Vacuum Controller |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | 2–4 mbar (CSH.6), 8 mbar (CSH.4) |
| Maximum Flow Rate | 34 L/min |
| Inlet/Outlet Port OD | 10 mm |
| Power Consumption | 245 W |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | DAB-2 |
| Vessel Capacity | 50 mL |
| Construction Material | High-Alloy Stainless Steel SS 316Ti (1.4571) with TFM-PTFE Insert |
| Maximum Operating Pressure | 200 bar (2900 psi) |
| Maximum Operating Temperature | 230 °C |
| Safety Certification | TÜV-tested pressure vessel |
| Pressure Relief | Monel rupture disc (200 bar) with PFA protective foil and certificate |
| Sealing Mechanism | Bayonet-type quick-lock closure |
| Vacuum Capability | Up to –5 bar (gauge) |
| Compliance | Designed and tested per PED 2014/68/EU (Pressure Equipment Directive) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | DAB-3 |
| Vessel Material | High-alloy stainless steel SS 316Ti (1.4571) |
| Liner Material | TFM-PTFE |
| Maximum Operating Pressure | 200 bar (2900 psi) |
| Maximum Operating Temperature | 230 °C |
| Internal Volume | 250 mL |
| Sealing Type | Bayonet quick-closure with V-seal or lip seal |
| Safety Device | Monel rupture disc (200 bar) with PFA protective foil and certified test documentation |
| Compliance | TÜV-certified pressure vessel per PED 2014/68/EU |
| Liner Options | TFM-PTFE inserts available in 250 mL (lip seal) and 420 mL (V-seal) configurations |
| Heating Compatibility | Compatible with 1-, 2-, and 4-position heating blocks |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | DB-1500 |
| Working Pressure | Up to 200 bar |
| Capacity | 1500 mL |
| Construction Material | SS 316Ti with Full PTFE Lining (Vessel & Lid) |
| Sealing Options | PTFE, FPM (Viton), FFKM (Kalrez), or FPM/FEP O-rings |
| Temperature Range (with Heating Jacket) | 50–300 °C |
| Pressure Sensor Accuracy | ±1% FS (0–200 bar) |
| Safety | Certified Rupture Disc (Monel, 200 bar, PFA-coated) |
| Compliance | Designed for GLP/GMP-aligned operation |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | DB-2000 |
| Working Volume | 2 L |
| Construction Material | 316Ti Stainless Steel with Full PTFE Lining |
| Maximum Operating Pressure | 200 bar |
| Temperature Range (with heating jacket) | 50–300 °C |
| Pressure Sensor Accuracy | ±1% FS |
| Sealing Options | PTFE, FPM (Viton), FFKM (Kalrez), FPM/FEP O-rings |
| Safety | Certified Rupture Disc (Monel, 200 bar, PFA-coated) |
| Compliance | Designed for GLP/GMP-aligned laboratory workflows |
| Software Option | Optional automated process control interface compatible with ASTM E2500 and FDA 21 CFR Part 11 audit trail requirements |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | DB-300 |
| Working Volume | 300 mL |
| Construction Material | 316Ti Stainless Steel with Full PTFE Lining |
| Maximum Operating Pressure | 200 bar |
| Sealing Materials | PTFE / FKM (Viton) / FFKM (Kalrez) O-rings |
| Temperature Range | Up to 300 °C |
| Compliance | Designed for GLP/GMP-aligned laboratory synthesis workflows |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | Digtor 22 C-8 |
| Type | Benchtop Centrifuge |
| Max Speed | 3000 rpm |
| Max RCF | 2425 × g |
| Capacity | 8 × 100 mL (8" or 6" tubes) |
| Dimensions | 540 × 650 × 400 mm |
| Weight | 77 kg |
| Temperature Range | RT+5 °C to 80 °C (1 °C increment, °C/°F selectable) |
| Noise Level | <60 dB(A) |
| Compliance | ASTM D91, D96, D893, D1796, D2273, D2709, D2711, D4007, D5546 |
| Safety Certifications | EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1, EN 61010-2-010 |
| EU Directives | 2011/65/EU (RoHS), 2012/19/EU (WEEE), 2014/30/EU (EMC), 2014/35/EU (LVD), 98/79/EC (IVDR) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | Digtor 22 C-U |
| Instrument Type | Benchtop Centrifuge |
| Max Speed | 3000 rpm |
| Max RCF | 2425 × g |
| Capacity | 4 × 100 mL (6" or 8" tubes) |
| Dimensions | 540 × 650 × 400 mm |
| Weight | 77 kg |
| Power Supply | 220–230 V, 50–60 Hz |
| Power Consumption | 400 W |
| Noise Level | < 60 dB(A) |
| Compliance | ASTM D91, D96, D893, D1796, D2273, D2709, D2711, D4007, D5546 |
| Safety Standards | EN 61010-1, EN 61010-2-020, EN 61326-1, EN 61326-2-6, EN 61010-2-010 |
| CE Directives | 2011/65/EU (RoHS), 2012/19/EU (WEEE), 2014/30/EU (EMC), 2014/35/EU (LVD), 98/79/EC (IVDR) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | Digtor 22C |
| Instrument Type | Benchtop Centrifuge |
| Max Speed | 3000 rpm |
| Max RCF | 2425 × g |
| Capacity | 4 × 100 mL (for 6" or 8" tubes) |
| Dimensions (W × D × H) | 540 × 650 × 400 mm |
| Weight | 77 kg |
| Power Supply | 220–230 V, 50–60 Hz, 1260 W |
| Compliance | ASTM D91, D96, D893, D1796, D2273, D2709, D2711, D4007, D5546 |
| Safety Certifications | EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1, EN 61010-2-010 |
| Optional GRS (Gas Release System) | Air inlet pressure 2 bar, exhaust flow ≥10 L/min, cycle interval 5 min, noise <40 dB(A), power consumption 20 W |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Product Line | EMS |
| Max. Flask Capacity | 72 L |
| Max. Temperature | 450 °C |
| Speed Range | 100–1850 rpm |
| Controller | ChemTron TCSS |
| Compliance | CE, RoHS, IEC 61000-6-3/6-4 |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | EMS115 |
| Max. Flask Capacity | 72 L |
| Stirring Speed Range | 100–1850 rpm |
| Max. Heating Temperature | 450 °C |
| Power | 600 W (EMS115 variant) |
| Internal Depth | 110 mm |
| External Diameter | 305 mm |
| External Height | 298 mm |
| Weight | 3.6 kg |
| Compliance | CE, RoHS, IEC 61000-6-3 |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | EVO |
| Nitrogen Flow | ≤12 L/min at 80 psi (5.5 bar) |
| Air Flow (Zero Air) | ≤24 L/min at 100 psi (6.9 bar) |
| Exhaust Air | ≤8 L/min at 60 psi (4.1 bar) |
| N₂ Purity | 98–99.9% |
| Dew Point (atmospheric) | −40 °C |
| Pressure Stability | ±0.1 bar (±0.5%) |
| Power Supply | 110 V / 60 Hz or 230 V / 50 Hz |
| Power Consumption | 1800 W |
| Operating Temperature | 15–40 °C |
| Relative Humidity | 0–99% (with condensate removal above 80% RH) |
| Noise Level | <55 dB(A) |
| Display | 128 × 64 px graphical LCD |
| Enclosure Rating | IP2X |
| Dimensions (L×D×H) | 482 × 835 × 641 mm |
| Weight | 90 kg |
| Output Fittings | 1/4" compression or 6 mm push-to-connect |
| Certifications | CE |
| Brand | ChemTron |
|---|---|
| Origin | Switzerland |
| Model | EZA-1 / EZA-2 |
| Output Flow | 0–1000 mL/min (EZA-1), 0–2000 mL/min (EZA-2) |
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Filtration Precision | 5 µm |
| Power Consumption | ≤150 W (EZA-1), ≤200 W (EZA-2) |
| Operating Temperature | 1–40 °C |
| Relative Humidity | ≤85% RH |
| Dimensions (W×D×H) | 220×500×510 mm (EZA-1), 220×515×510 mm (EZA-2) |
| Weight | 15 kg (EZA-1), 20 kg (EZA-2) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | EZChem |
| Reactor Volumes | 10 L, 20 L, 30 L, 50 L (two configurations), 100 L |
| Material | High-quality borosilicate glass (DIN/ISO 3585 compliant) |
| Temperature Range | −60 °C to +200 °C |
| Pressure Rating | Suitable for ambient, vacuum, and mild positive pressure operation (up to 0.5 bar gauge) |
| Stirring Speed | Continuous operation up to 500 rpm |
| Stirrer Shaft | Stainless steel core with PTFE or PFA coating |
| Jacket Inlet/Outlet | DN15 (10–30 L), DN25 (50–100 L) |
| Flange Standards | DN200 (10 L), DN300 (20–50 L), DN400 (100 L) |
| Bottom Valve | Adjustable PTFE-lined valve, 0–25 mm port |
| Condenser Length | 300 mm (10 L), 400 mm (20–100 L) |
| Collection Vessel Capacity | 5 L to 20 L |
| Feed Funnel Volume | 1 L to 2 L |
| Temperature Probe Length | 600 mm to 1200 mm |
| Overall Dimensions (W × D × H) | 720 × 600 × 2080 mm (10 L) to 890 × 716 × 2980 mm (100 L) |
| Compliance | Designed per ISO 15500-2 (glass vessel safety), EN 61000-6-3 (EMC), and DIN 12574 (laboratory glassware) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | EZH 300 / EZH 600 |
| Hydrogen Generation Principle | Alkaline Water Electrolysis |
| Output Flow Rate | 0–350 mL/min (EZH 300) / 0–650 mL/min (EZH 600) |
| Output Pressure | 0–0.5 MPa |
| Hydrogen Purity | >99.999% |
| Power Consumption | ≤170 W (EZH 300) / ≤350 W (EZH 600) |
| Pressure Stability | <0.001 MPa |
| Dimensions (W×D×H) | 220 × 400 × 490 mm |
| Internal Reservoir Volume | 1 L |
| Weight | 14 kg |
| Operating Temperature | 1–40 °C |
| Relative Humidity | ≤85% RH |
| Gas Outlet Port | 3 mm OD tubing connection |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | FID FLAT NM |
| Hydrogen Generation Principle | PEM Electrolysis of Deionized Water |
| Output Flow Rate | 100–1350 mL/min |
| Output Pressure | 11 bar (160 psig) |
| Hydrogen Purity | 99.99996% |
| Water Reservoir Capacity | 7 L |
| Internal Gas Volume | <50 mL |
| Dimensions (W×D×H) | 690 × 680 × 150 mm |
| Weight | 41–45 kg |
| Power Consumption | 90–450 W |
| Operating Environment | 15–40 °C, 0–80% RH (non-condensing) |
| Certifications | CE, CSA, FCC |
| Display | 128×64-pixel LCD with tactile buttons |
| Noise Level | ≤46 dB(A) |
| Max Load Capacity | 80 kg |
| Gas Outlet | 1/8" Swagelock |
| Water Resistivity Requirement | ≥5 MΩ·cm (min. 1 MΩ·cm acceptable) |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | FID FLAT PG |
| Hydrogen Generation Principle | PEM Electrolysis of Deionized Water |
| Output Pressure | 11 bar (160 psig) |
| Hydrogen Purity | 99.9996% |
| Max Flow Rate | 250 mL/min |
| Water Reservoir Capacity | 7 L |
| Internal Gas Volume | < 50 mL |
| Dimensions (W×D×H) | 690 × 680 × 150 mm |
| Weight | 39 kg |
| Power Consumption | 115 W |
| Noise Level | ≤46 dB(A) |
| Certifications | CE, CSA, FCC |
| Compliance | Designed for GLP/GMP environments |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | FID TOWER NM |
| Hydrogen Generation Principle | Proton Exchange Membrane (PEM) Electrolysis of Ultrapure Water |
| Output Flow Rate | 5000 mL/min |
| Output Pressure | 11 bar |
| Hydrogen Purity | 99.99996% |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | FID TOWER PG |
| Hydrogen Purity | 99.9996% |
| Max H₂ Flow | 100–600 mL/min |
| Max H₂ Pressure | 11 bar |
| Water Reservoir | 5 L |
| Dimensions | 140 × 580 × 490 mm |
| Weight | 25–35 kg |
| Certifications | CE, CSA, FCC |
| Air Module Options | 1800 mL/min or 5000 mL/min zero-air output (<0.1 ppm HC & CO) |
| Dryer Technology | Static membrane + dual cold-regenerative purifiers |
| Electrolysis | CPEM proton exchange membrane + titanium CCEEL electrolyzer |
| Safety | Internal gas volume <50 mL, multi-point leak/pressure/temperature/conductivity monitoring |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | FID TOWER-PG / FID TOWER-NM |
| Output Flow Range | 100–1350 mL/min |
| Max Pressure | 11 bar (160 psig) |
| Purity | 99.99996% (NM), 99.9996% (PG) |
| Water Reservoir | 5 L |
| Internal Gas Volume | <50 mL |
| Dimensions | 140 × 580 × 490 mm (W×D×H) |
| Weight | 25–35 kg |
| Power | 110–120 V / 60 Hz or 220–240 V / 50 Hz |
| Operating Temp/Humidity | 15–40 °C, 0–80% RH (non-condensing) |
| Noise Level | ≤46 dB(A) |
| Gas Outlet | 1/8" Swagelock |
| Certifications | CE, CSA, FCC |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | GC MATE |
| Gas Purity | 99.9996% (H₂), 99.999% (N₂), >99.999% (Air after purification) |
| Output Flow | N₂: 4000 mL/min, H₂: 600 mL/min, Air: 5000 mL/min |
| Output Pressure | 11 bar (H₂), 5 bar (N₂), 7–10 bar (Air input required) |
| Design | Modular Split-System |
| Control Interface | Physical Keypad + LCD Display (128×64 pixels) |
| Certifications | CE, CSA, FCC |
| Compliance | Designed for GLP/GMP environments |
| Brand | ChemTron |
|---|---|
| Origin | Switzerland |
| Model | GC3000 |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Cracking |
| Output Flow Rate | 1.5–30 L/min |
| Output Pressure | 4.5–10 bar |
| Total Hydrocarbons (THC) | <0.05 ppm |
| Dew Point | −30 °C |
| Certifications | CE, CSA, FCC |
| Power Supply | 110–120 V / 60 Hz or 220–240 V / 50 Hz |
| Dimensions (H×W×D) | 410 × 550 × 230 mm |
| Weight | 12 kg |
| Inlet Connection | 1/4″ NPT |
| Outlet Connection | 1/8″ NPT |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | GH40L |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Cracking |
| Output Flow Rate | 0–40 L/min |
| Output Pressure | 0–9.5 bar |
| Total Hydrocarbon Content | <0.1 ppm (as methane equivalent) |
| Dew Point | +3 °C |
| Particle Filtration Efficiency | ≥99.9999% at 0.01 µm |
| Internal Tank Material | Electropolished Stainless Steel (AISI 316L) |
| Safety Features | Thermal Cut-off Switch, Spring-Loaded Pressure Relief Valve, Digital Pressure Switch with Adjustable Setpoints |
| Noise Level | ≤58 dB(A) |
| Power Consumption | 1200 W |
| Dimensions (W×D×H) | 470 × 700 × 770 mm |
| Weight | 72 kg |
| Inlet Filtration | Pre-filter for particulates and ambient dust |
| Drive Type | Direct-Coupled Motor (no belt transmission) |
| Compliance | CE, ISO 8573-1 Class 1:2:1 (Air Purity Class), EN 60335-1, EN 61000-6-3 |