Common Laboratory Equipment
Filter
Showing 2611–2640 of 17706 results
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MINI WHISPER HYBRID |
| Nitrogen Flow Rate | 5–12 L/min @ 1–7 bar |
| Air Flow Output | 35 L/min (dual-stream: 26 L/min @ 7 bar + 10 L/min @ 4 bar) |
| Nitrogen Purity | ≥99% |
| Dew Point | −40 °C (atmospheric) |
| Particle Filtration | ≤0.01 µm, compliant with ISO 8573-1:2010 Class 1.2.1 |
| Inlet Air Requirement | 96–192 L/min at 8.5–10 bar |
| Pressure Drop | ≤1.5 bar |
| Operating Temperature | 15–35 °C |
| Dimensions (W×H×D) | 348 × 735 × 350 mm |
| Weight | 8 kg |
| Certification | CE, IQ/OQ support available |
| Technology | Hollow-fiber membrane separation (0.3 mm ID, 40 nm selective layer) |
| Interface | 1/4" G nitrogen outlet, 1/8" G air outlet |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MINI WHISPER |
| Nitrogen Flow Rate | 5–12 L/min @ 1–7 bar |
| Nitrogen Purity | ≥98%–99.5% |
| Outlet Pressure Range | 1–7 bar (15–105 psig) |
| Required Inlet Air Pressure | 8.5–10 bar (123–160 psig) |
| Pressure Drop | ≤1.5 bar (22 psig) |
| Dew Point | −40 °C to −50 °C (dependent on inlet air quality) |
| Particulate Filtration | <0.01 µm |
| Air Quality Compliance | ISO 8573-1:2010 Class 1.2.1 |
| Membrane Technology | Hollow-fiber membrane with 40 nm separation layer, 0.3 mm inner diameter |
| Installation Options | Benchtop or wall-mounted |
| Power Requirement | None (passive operation) |
| Dimensions (H×W×D) | 735 × 348 × 350 mm |
| Weight | 8 kg |
| Certifications | CE, IQ/OQ documentation available |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MINI-WHISPER N₂ |
| Output Flow Rate | 8–12 L/min |
| Output Pressure | 1–7 bar |
| Nitrogen Purity | 98–99.5% |
| Dew Point | −40 °C |
| Dimensions (H×W×D) | 735 × 348 × 350 mm |
| Weight | 8 kg |
| Certification | CE, FCC, CSA |
| Air Inlet Requirement | 5–8 bar, >80 L/min |
| Pressure Drop | <0.8 bar |
| Particulate Filtration | <0.01 µm |
| Operating Temperature | 10–35 °C |
| Interface | 1/4″ G thread (air inlet), 1/8″ G thread (N₂ outlet) |
| Compliance | IQ/OQ documentation available |
| Brand | JULABO-Chemtron |
|---|---|
| Origin | Germany |
| Model | MISTRAL EVO HYBRID |
| Nitrogen Flow Rate | up to 12 L/min at 80 psi |
| Source Air Flow | up to 25 L/min at 100 psi |
| Exhaust Air Flow | up to 10 L/min at 80 psi |
| Nitrogen Purity | >98% |
| Dew Point | −40 °C |
| Operating Temperature | 15–40 °C |
| Power Supply | 110 V / 60 Hz or 230 V / 50 Hz |
| Power Consumption | 1800 W |
| Pressure Stability | ±0.5% (0.1 bar) |
| Display | 128×64 px graphical LCD |
| Noise Level | 55 dB(A) |
| Weight | 90 kg |
| Dimensions (L×W×H) | 482×835×641 mm |
| Certifications | CE, MET, FCC |
| Protection Class | IP2X |
| Output Interface | Quick-connect fitting for 6 mm OD tubing |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MISTRAL EVO HYBRID |
| Nitrogen Flow Rate | up to 12 L/min at 80 psi |
| Source Air Flow | up to 24 L/min at 100 psi |
| Exhaust Air Flow | up to 8 L/min at 60 psi |
| Nitrogen Purity | 98–99.9% |
| Dew Point | −40 °C |
| Operating Temperature | 15–35 °C |
| Power Supply | 110 V / 60 Hz or 230 V / 50 Hz |
| Power Consumption | 1800 W |
| Pressure Stability | ±0.5% (±0.1 bar) |
| Display | Graphical LCD (128 × 64 px) |
| Noise Level | 55 dB(A) |
| Protection Class | IP2X |
| Dimensions (L × D × H) | 482 × 835 × 641 mm |
| Weight | 90 kg |
| Certifications | CE |
| Output Fittings | 1/4" compression or 6 mm quick-connect |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MISTRAL EVO |
| Output Flow Rate | 10–40 L/min |
| Output Pressure | 8 bar (116 psi) |
| Nitrogen Purity | 97–99.9% |
| Power Supply | 110 V / 60 Hz or 230 V / 50 Hz |
| Weight | 90 kg |
| Power Consumption | 1800 W |
| Pressure Stability | ±0.1 bar (±0.5%) |
| Display | Graphical LCD (128 × 64 px) |
| Protection Class | IP2X |
| Operating Temperature | 15–40 °C |
| Sound Pressure Level | <60 dB(A) |
| Alarm Relay | 250 VAC, max 16 A |
| Gas Outlet | 1/4" compression fitting or 6 mm push-to-connect |
| Dimensions (L × D × H) | 482 × 835 × 641 mm |
| Certifications | CE |
| Brand | ChemTron |
|---|---|
| Origin | Switzerland |
| Model | N2 TOWER Plus |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) with Carbon Molecular Sieve (CMS) |
| Output Flow Rate | 4000 mL/min |
| Output Pressure | 5 bar |
| Nitrogen Purity | 99.999% |
| Nitrogen Dew Point | < −50 °C |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | N2-Whisper 0-40 / 0-80 / 0-120 |
| Output Flow | 40–120 L/min N₂ |
| Output Pressure | 8.5–10 bar |
| Purity | >98% N₂ |
| Dew Point | <−40 °C |
| Particulate Filtration | <0.01 µm |
| Pressure Drop | <0.8 bar |
| Dimensions (H×W×D) | 1150×48×260 mm |
| Certifications | CE, FCC, CSA |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | NM Plus |
| Hydrogen Generation Principle | Proton Exchange Membrane (PEM) Electrolysis of Deionized Water |
| Output Flow Rate | 300 mL/min |
| Output Pressure | 11 bar (160 psig) |
| Hydrogen Purity | 99.99996% |
| Power Consumption | 100–410 W |
| Brand | ChemTron |
|---|---|
| Origin | Switzerland |
| Model | NMH2-1350plus |
| Hydrogen Generation Principle | CPEM & CCELL Proton Exchange Membrane Electrolysis |
| Output Flow Rate | 100–1350 mL/min |
| Output Pressure | 11 bar (160 psig) |
| Hydrogen Purity | 99.99996% |
| Power Consumption | 100 W |
| Brand | ChemTron |
|---|---|
| Origin | Switzerland |
| Model | NMH2-500 Plus |
| Hydrogen Generation Principle | Proton Exchange Membrane (PEM) Electrolysis of Deionized Water |
| Output Flow Rate | 100–1350 mL/min |
| Maximum Output Pressure | 7 bar |
| Hydrogen Purity | 99.99996% |
| Power Consumption | 75 W |
| Brand | ChemTron |
|---|---|
| Origin | USA |
| Model | NR-20L, NR-30L, NR-50L |
| Vessel Capacity | 20 L, 30 L, 50 L |
| Design Pressure | up to 20 bar |
| Maximum Operating Temperature | 200 °C or 250 °C (dependent on seal material) |
| Construction Material | 316 stainless steel (standard) |
| Jacketed | Yes |
| Jacket Pressure Rating | 3 bar |
| Jacket Volume | ≈5.3 L / ≈15.8 L / ≈20.0 L |
| Bottom Drain Valve | Standard |
| Sealing Options | Viton® (FKM), PTFE, Kalrez® (FFKM) |
| Magnetic Coupling | RV-400 series |
| Standard Fittings | 7 total ports per lid (including 1× central magnetic drive port, 1× thermowell, 1× rupture disc assembly, 1× vent valve, 2× 6 mm ports for heating/cooling coils, 3× 8 mm auxiliary ports) |
| Handle-equipped lid | Yes |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | NR-20L |
| Vessel Capacity | 20 L |
| Construction Material | Stainless Steel (AISI 316) |
| Maximum Operating Pressure | 20 bar |
| Maximum Temperature | 200 °C (with FKM seal) / 250 °C (with FFKM seal) |
| Internal Diameter | 309 mm |
| Internal Height | 425 mm |
| Jacket Volume | ≈5.3 L |
| Jacket Max Pressure | 3 bar |
| Bottom Discharge Valve | Standard |
| Magnetic Coupling | RV-400 |
| Sealing Options | FKM (Viton®), PTFE, FFKM (Kalrez®) |
| Standard Ports | 7 total (1× central for magnetic drive, 1× thermowell, 1× rupture disc, 1× vent valve, 2× 6 mm for heating/cooling coils, 3× 8 mm auxiliary) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | NR-30L |
| Vessel Capacity | 30 L |
| Construction Material | Stainless Steel (AISI 316) |
| Maximum Operating Pressure | 20 bar |
| Maximum Temperature | 200 °C (with FKM) / 250 °C (with FFKM) |
| Internal Dimensions | Ø340 mm × H470 mm |
| Jacket Volume | ≈15.8 L |
| Jacket Max Pressure | 3 bar |
| Bottom Discharge Valve | Standard |
| Sealing Options | FKM (Viton®), PTFE, FFKM (Kalrez®) |
| Magnetic Coupling Bearing | RV-400 |
| Standard Ports | 7 total (1× central for magnetic drive, 1× thermowell, 1× rupture disc, 1× vent valve, 2× 6 mm for heating/cooling coils, 3× 8 mm auxiliary) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | NR-500 / NR-1000 / NR-2000 |
| Vessel Material | Stainless Steel (AISI 316) or Hastelloy C-276 |
| Design Pressure | Up to 25 bar |
| Operating Temperature | ≤300 °C (stainless/Hastelloy), ≤230 °C (with PTFE liner) |
| Nominal Volume | 500 mL / 1000 mL / 2000 mL |
| Sealing Options | PTFE, FKM (Viton®), FFKM (Kalrez®) O-rings |
| Vacuum & Pressure Rating | Full vacuum to +25 bar |
| Optional Features | Bottom discharge valve, PTFE liner, magnetic coupling drive (RV-100), jacketed heating/cooling, temperature sensor port, pressure transducer interface, rupture disc safety system |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | NR-5L / NR-10L |
| Material | Stainless Steel (316L) or Hastelloy C-276 |
| Design Pressure | 25 bar |
| Max. Operating Temperature | 300°C (stainless/Hastelloy), 230°C (with PTFE lining) |
| Vessel Capacity | 5 L / 10 L |
| Internal Diameter | 207 mm / 229 mm |
| Internal Height | 234 mm / 320 mm |
| Weight | 16.4 kg / 20 kg |
| Sealing Options | PTFE, FKM (Viton®), FFKM (Kalrez®) O-rings |
| Stirring System | RV-100WB18D / RV-100-SS (standard) |
| Heating Options | Jacketed oil bath (e.g., JULABO), electric heating mantle, or external heating/cooling coil |
| Safety Features | Rupture disc, pressure gauge (optional pressure transducer), temperature well |
| Optional Accessories | Bottom discharge valve, PTFE liner, motorized lifting stand, 6 mm ports for coil integration, three 8 mm auxiliary ports |
| Brand | ChemTron |
|---|---|
| Origin | USA |
| Model | OHS.1 / OHS.2 |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Stirring Volume | 50 L (OHS.1), 100 L (OHS.2) |
| Speed Range | 20–2000 rpm (OHS.2), 40–2000 rpm (OHS.1) |
| Speed Accuracy | ±1 rpm |
| Max. Torque | 70 N·cm |
| Max. Viscosity | 20,000 cP |
| Motor | Brushless DC |
| Display & Control | LED + Knob (OHS.1) |
| Dimensions (W×D×H) | 105 × 160 × 185 mm |
| Power Input/Output | 70 W / 50 W |
| Shaft Clamping Diameter | 10 mm |
| Reversibility | Not supported (OHS.1), Supported (OHS.2) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | OHS.4 / OHS.4F |
| Stirrer Type | Electric Drive Stirrer |
| Max. Mixing Volume | 40 L (H₂O) |
| Speed Range | 20–1800 rpm (dual-range: 20–360 rpm / 361–1800 rpm) |
| Max. Torque | 565 N·cm (Low-Speed Range) |
| Torque at High Speed | 113 N·cm |
| Max. Viscosity Handling | 150,000 cP |
| Speed Accuracy | ±3% (n > 300 rpm) |
| Minimum Speed Increment | 1 rpm |
| Temperature Measurement Range | −10 to 350 °C |
| Temp. Resolution | 0.1 °C |
| Power Input | 100–240 VAC, 50/60 Hz |
| Motor Type | Brushless DC Motor |
| Chuck Type | Self-locking, tool-free drill chuck |
| Shaft Clamp Diameter | 0.5–10 mm |
| Hollow Shaft Inner Diameter | 10.2 mm |
| Timer Range | 99 h 59 min 59 sec |
| Display | TFT touchscreen + rotary encoder |
| Rotation Direction | Bidirectional (CW/CCW) |
| Status Indicators | Standby (blue), Operation (green), Alarm (red) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | OHS.6 / OHS.9 |
| Maximum Stirring Volume | 100 L |
| Speed Range | 70–3000 rpm (OHS.9), 20–800 rpm (OHS.6) |
| Torque | up to 410 N·cm (OHS.9), 132 N·cm (OHS.6) |
| Continuous Rated Torque | 116 N·cm (OHS.9), 18 N·cm (OHS.6) |
| Max. Viscosity | 200,000 cP (OHS.9), 150,000 cP (OHS.6) |
| Motor Type | Brushless DC |
| Power Input | 450 W (OHS.9), 150 W (OHS.6) |
| Dimensions (Motor) | 165 × 75 × 75 mm (OHS.9), 216 × 65 × 65 mm (OHS.6) |
| Weight (Motor) | 2.8 kg (OHS.9), 2.3 kg (OHS.6) |
| Control Interface | LCD display with real-time torque & speed readout, USB digital interface, 0–10 V analog input/output, 0–20 mA analog input, footswitch port |
| Cable Length | Standard 3 m (optional: 1.5 / 6 / 10 m) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | Onyx |
| Oxygen Purity | 95% |
| Oxygen Flow Rate | 10 L/min |
| Output Pressure | 20 psig (1.37 bar) |
| Dimensions | 400 × 370 × 720 mm |
| Operating Temperature | Ambient |
| Certifications | CAN/CSA C22.2 No. 61010-1, 2nd Ed. |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | P440 |
| Output Flow Rate | 30 L/min |
| Maximum Output Pressure | 5 bar |
| Adjustable Pressure Range | 0–5 bar |
| Tank Volume | 30 L |
| Motor Power | 750 W |
| Noise Level | 58 dB(A) |
| Dimensions (W×D×H) | 340 × 680 × 720 mm |
| Weight | 56 kg |
| Connection | 1/4" compression fitting or 6 mm push-to-connect |
| Protection | Thermal cut-off switch |
| Drive Type | Direct-coupled |
| Pump Type | Oil-free piston pump |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | P640 |
| Output Flow Rate | 60 L/min |
| Maximum Output Pressure | 8 bar |
| Adjustable Pressure Range | 0–8 bar |
| Tank Volume | 30 L |
| Motor Power | 550 W |
| Noise Level | 58 dB(A) |
| Dimensions (W×D×H) | 470 × 640 × 720 mm |
| Weight | 138 kg |
| Air Outlet Connection | 1/4" compression fitting or 6 mm push-to-connect |
| Filter Type | WND30005 Class I Air Filter (Order No. 167640-22) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | PCB 1500 Plus |
| Temperature Range | 0–110 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Repeatability | ±0.5 °C |
| Semiconductor-Based Heating/Cooling | Yes |
| RS232 Interface | Yes |
| USB Interface | Yes |
| Display | Graphical LCD |
| Certifications | CE, CSA |
| Voltage Options | 110 V / 220 V AC |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | PG Plus |
| Hydrogen Generation Principle | Proton Exchange Membrane (PEM) Electrolysis of High-Purity Water |
| Output Pressure | 11 bar (160 psig) |
| Hydrogen Purity | 99.9996% |
| Flow Rate Range | 100–600 mL/min (model-dependent) |
| Water Reservoir Capacity | 2.5 L (2.0 L usable) |
| Internal Gas Volume | < 50 mL |
| Power Consumption | 75–230 W (model-dependent) |
| Dimensions (W×D×H) | 230 × 370 × 507 mm |
| Weight | 13–15 kg |
| Noise Level | ≤46 dB(A) |
| Display | 128×64-pixel LCD with tactile buttons |
| Certifications | CE, CSA, FCC |
| Water Resistivity Requirement | ≥5 MΩ·cm (min. 1 MΩ·cm acceptable) |
| Gas Outlet | 1/8" Swagelock |
| Brand | ChemTron |
|---|---|
| Origin | USA |
| Model | Pilot-Scale Kit |
| Vessel Capacity | 10–200 L |
| Vessel Materials | Borosilicate Glass, 316L Stainless Steel, Hastelloy®, PTFE-Lined |
| Vessel Configurations | Cylindrical, Spherical, Tubular |
| Jacketing Options | Single-Wall, Single-Jacketed, Double-Jacketed |
| Temperature Control | JULABO Presto Dynamic Temperature Management System |
| Temperature Range | −100 °C to +300 °C (with compatible circulator & bath fluid) |
| Max Operating Temperature (Glass Vessel) | 230 °C |
| Max ΔT (Vessel Wall vs. Contents) | 80 °C |
| Max Pressure (Spherical Lid, Standard Taper) | 5 psi |
| Max Vacuum | 5–200 mmHg (dependent on volume & geometry) |
| Stirring | Top-Mounted High-Torque Mechanical Agitator |
| Software | JULABO EasyTemp Professional & Auto Reactor Central Control Suite |
| User Interface | Integrated LCD Touchscreen + Optional JULABO Wireless Remote (range >100 m) |
| Structural Frame | Modular Stainless Steel with Locking Casters |
| Fluid-Wetted Materials | ASTM E438 Type I, Class A borosilicate glass (e.g., Pyrex®/Duran®) and PTFE |
| Sealing | Precision-Ground ISO KF/ISO-F standard glass joints |
| Drain Options | Bottom discharge valve with chemically resistant elastomeric O-rings (FKM/FFKM/PTFE-composite) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Pilot-Scale Stainless Steel Atmospheric Reactor |
| Vessel Material | AISI 316 Stainless Steel |
| Operating Pressure | Atmospheric (0.1 MPa g) |
| Working Volume | Small-scale (Typical Range: 1–20 L) |
| Temperature Control Range | –80 to +250 °C (Continuous), up to +350 °C (Intermittent) |
| Temperature Stability | ±0.01 °C |
| Sealing Options | Mechanical Seal or Magnetic Coupling Seal |
| Agitator Options | Standard, Pneumatic Explosion-Proof, or Heavy-Duty Impeller Drive |
| Surface Finish | Internal Mirror Polish (Ra ≤ 0.4 µm), CIP-Compatible |
| Compliance | Meets DIN 11850 / EHEDG for Hygienic Design, ASME BPVC Section VIII Div. 1 (for optional pressure-rated variants) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | PL524 Pre / PL524 Pro |
| Temperature Range | –100 °C to 550 °C (PL524 Pre) / 0 °C to 550 °C (PL524 Pro) |
| Temperature Stability | ±0.03 °C |
| Display Resolution | 0.01 °C |
| Sensor Input | Dual Pt100 RTD or Dual Type K Thermocouple |
| Control Algorithm | Adaptive AI-PID |
| Programming Steps | 30-segment ramp-soak profile |
| Interface | TFT touchscreen (PL524 Pre) / LED display (PL524 Pro) |
| EMC Immunity | 4 kV EFT compliant |
| Power Architecture | Dual-CPU (ARM + dedicated real-time microcontroller) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | PPG |
| Reactor Volume | 10–100 L |
| Material | High-Purity Borosilicate Glass (DIN ISO 3585) |
| Operating Pressure Range | –1 to +0.5 bar (gauge) |
| Vacuum Capability | ≤20 mbar (abs) |
| Max Continuous Stirring Speed | 500 rpm |
| Short-Term Max Speed | 800 rpm |
| Jacket Inlet/Outlet Port | DN25 |
| Condenser Surface Area | 0.6 m² (DN50 P-type) |
| Temperature Range | –60 °C to +200 °C |
| Wetted Materials | Borosilicate Glass, PTFE, PFA |
| Flange Standard | DIN 2817 / ISO 2852 |
| Top Plate Configuration | 7-port DN300 lid (1×DN25 CN, 1×DN80, 3×DN40, 1×DN25, 1×DN50) |
| Bottom Valve Bore | 0–25 mm |
| Optional Accessories | Pneumatic bottom valve, integrated Pt100 temperature sensor (600–900 mm immersion length), AR1.8 Automated Reaction Control System |
| Compliance | Designed for GMP-aligned laboratory synthesis environments |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | PPG30L |
| Temperature Range | −60 °C to +200 °C |
| Temperature Control Accuracy | ±0.01 °C |
| Reaction Vessel Capacity | 10–100 L |
| Number of Reaction Units | 1 |
| Maximum Continuous Stirring Speed | 500 rpm |
| Short-Term Stirring Speed | 800 rpm |
| Jacket Inlet/Outlet Port Size | DN25 |
| Condenser Surface Area | 0.6 m² (DN50P) |
| Material of Construction | High-Quality Borosilicate Glass (DIN ISO 3585), PTFE, PFA |
| Pressure Rating | −1 to +0.5 bar (gauge) |
| Vessel Opening Diameter (PPG30L) | DN300 |
| Bottom Valve Orifice | 0–25 mm |
| Stirrer Shaft Diameter | 16 mm (Stainless Steel/PTFE-coated) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | PR Series |
| Vessel Material | Borosilicate Glass or Quartz |
| Working Pressure | Low-Pressure |
| Volume Options | 250 mL, 500 mL, 1000 mL |
| Light Source | Hanovia Medium-Pressure Mercury Lamp (450 W) |
| Cooling Interface | 8 mm water inlet/outlet |
| Temperature Control | Optional jacketed configuration with external circulator |
| Safety System | Integrated flow-monitoring and automatic lamp cutoff (WFM series) |
| Compliance | Designed for GLP-compliant photochemistry workflows under ISO/IEC 17025-aligned laboratory practices |