Constant Temp/Heating/Drying Equipment
Filter
Showing 2881–2910 of 3271 results
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC-510 |
| Sample Type | Aqueous solutions only |
| Maximum Feed Rate | 500 mL/h |
| Inlet Air Temperature Range | 50–200 °C |
| Particle Size Distribution | 1–25 µm |
| Vacuum Level | −0.08 MPa |
| Temperature Control Accuracy | ±1 °C |
| Nozzle Orifice | 1.0 mm standard (optional: 0.5 / 0.8 / 1.5 / 2.0 mm) |
| Minimum Sample Volume | 10–20 mL (dependent on solids content) |
| Total Power Consumption | 3.5 kW |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | YCV Series |
| Sample Type | Aqueous Solutions |
| Maximum Throughput | 1500 mL/h |
| Temperature Range | 35–90 °C |
| Particle Size Range | 50–500 µm |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | YCV |
| Quotation | Upon Request |
| Sample Type | Aqueous Solutions |
| Maximum Throughput | 1500 mL/h |
| Temperature Range | 35–90 °C |
| Particle Size Range | 50–500 µm |
| Brand | Yamato |
|---|---|
| Origin | Japan |
| Model | ADL311 |
| Sample Types | Food, Pharmaceuticals, Organic & Inorganic Chemicals |
| Max. Feed Rate | 26 mL/min |
| Inlet Temp. Range | 40–220 °C |
| Outlet Temp. Range | 0–60 °C |
| Particle Size Range | 40–100 µm |
| Evaporation Capacity | Up to 1300 mL/h |
| Air Flow | 0–0.7 m³/min |
| Atomizing Air Pressure | 0–0.6 MPa |
| Power Supply | 200–240 V AC, 50/60 Hz |
| Weight | 80 kg |
| Dimensions (W×D×H) | 580×420×1150 mm |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | DL410 |
| Maximum Water Evaporation Rate | 3000 mL/h |
| Atomization Method | Two-Fluid Nozzle (Orifice Diameter: 0.7 mm) |
| Drying Configuration | Co-Current Downward Spray |
| Inlet Air Temperature Range | 0–300 °C |
| Outlet Air Temperature Monitoring | K-Type Thermocouple |
| Drying Chamber Dimensions | Ø457 mm × H975 mm (Borosilicate Glass) |
| Chamber & Cyclone Material | Ultra-Hard Borosilicate Glass |
| Feed Pump | Precision Peristaltic Type, 0–70 mL/min Adjustable |
| Hot Air Flow Control | DC Brushless Blower, 0.3–1.0 m³/min |
| Heating System | Dual Stainless Steel Heaters, 2.0 kW × 2 |
| Nozzle Maintenance | Automated Pulse Cleaning (Probe Tapping + Purge Air) |
| Safety Features | Independent Over-Temperature Cut-Off, Leakage Current Protection, Feed Pump Reverse Rotation Detection, Electrostatic Discharge Brush, Integrated Safety Enclosure |
| Power Supply | AC 220 V, 50/60 Hz, 24 A |
| Dimensions (W×D×H) | 1060 × 880 × 1770 mm |
| Weight | ~180 kg |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | GB210-A |
| Input Voltage Range | AC 200–240 V (50/60 Hz) |
| Inlet Air Temperature Range | 40–220 °C (±1 °C PID control) |
| Outlet Air Temperature Range | 0–60 °C |
| Drying Air Flow | 0–0.7 m³/min |
| Atomizing Air Pressure | 0–0.6 MPa |
| Feed Pump Flow Rate | 0–26 mL/min |
| Power Consumption | 2.0–2.88 kW |
| Dimensions (W×D×H) | 760 × 420 × 1350 mm |
| Weight | 110 kg |
| [Brand | Yaohua |
|---|---|
| Origin | Shanghai, China |
| Model Series | DHG-9003 |
| Temperature Range | RT+10°C to 200°C or 250°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ±1°C |
| Power Input | 600–2450 W (model-dependent) |
| Timer Range | 1–9999 min |
| Chamber Material | Mirror-finish stainless steel (interior), cold-rolled steel with powder coating (exterior) |
| Airflow Control | Adjustable intake/exhaust via front panel |
| Compliance | Designed for GLP-compliant laboratory environments |
| Optional | RS485 interface, thermal printer, programmable controller, 25 mm test port] |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Model | B-220 |
| Temperature Range | Room Temp + 5°C to 100°C |
| Temperature Stability | ±0.5°C |
| Bath Capacity | 22 L |
| Heating Power | 1000 W |
| External Dimensions (W×D×H) | 570 × 330 × 220 mm |
| Voltage/Frequency | 220 V / 50 Hz |
| Net Weight | 3.6 kg |
| Inner Bath Dimensions | 220 × 115 × 180 mm (L×W×H) |
| Heating Element | Fully Submerged Annular Stainless Steel Heater with PTFE-Coated Interior |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | B-260 |
| Quotation | Upon Request |
| Temperature Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±1 °C |
| Bath Chamber Dimensions | 26 cm × 15 cm (L × W) |
| Heating Power | 1.0 kW |
| External Dimensions (W × D × H) | 36 cm × 29 cm × 23 cm |
| Voltage/Frequency | 220 V / 50 Hz |
| Net Weight | 5.5 kg |
| Brand | Yarong |
|---|---|
| Model | B-260 |
| Temperature Range | Ambient to 99 °C |
| Temperature Stability | ±1 °C |
| Bath Chamber Dimensions | 26 × 15 cm (L × W) |
| Heating Power | 1 kW |
| External Dimensions (W × D × H) | 36 × 29 × 23 cm |
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Brand | YDWG |
|---|---|
| Origin | Shanghai, China |
| Model | WG-DC0506 |
| Bath Volume | 6 L |
| Temperature Range | −5.00 °C to 99.99 °C |
| Temperature Stability | ±0.05 °C (at 25 °C, water or ethanol medium) |
| Display Resolution | 0.01 °C |
| Pump Flow Rate | 8–10 L/min |
| Circulation Mode | Internal & External |
| Cooling Method | Compressor-Based |
| Temperature Sensor | Imported Pt100 Platinum Resistance Thermometer |
| Control System | Microprocessor-Based PID with Auto-Tuning |
| Power Supply | 220 VAC ±10%, 50 Hz ±1 Hz |
| Dimensions (W×D×H) | 462 × 265 × 665 mm |
| Net Weight | 35 kg |
| Communication Interface | USB (optional), RS-485 (optional), USB flash drive data export support |
| Brand | YDWOPT |
|---|---|
| Origin | Shanghai, China |
| Model | WG-DCZ |
| Instrument Type | Circulating Constant-Temperature Bath |
| Temperature Range | 4 °C to 95 °C |
| Temperature Stability | ±0.1 °C (with water) |
| Bath Volume | 2 L |
| Circulation Mode | External Recirculation |
| Pump Flow Rate | 4 L/min |
| Temperature Resolution | 0.1 °C |
| Control Method | Microprocessor-Based PID with Pt100 Sensor |
| Refrigeration | Imported Hermetic Compressor |
| Heating/Cooling Type | Dual-Mode |
| Power Supply | 220 VAC ±10%, 50 Hz ±1 Hz |
| Total Power | 450 W |
| Dimensions (W×D×H) | 360 mm × 400 mm × 265 mm |
| Net Weight | 12 kg |
| Origin | Domestic |
|---|---|
| Manufacturer Type | Distributor |
| Model | YFB2D |
| Pricing | Upon Request |
| External Dimensions (D×W×H) | 89×92×91 cm |
| Chamber Dimensions (D×W×H) | 50×50×50 cm |
| Chamber Volume | 125 L |
| Temperature Range | R.T.+10 to 150 °C |
| Temperature Uniformity | ±3.5% |
| Temperature Fluctuation | ±0.5 °C |
| Heating Power | 3 kW |
| Construction | Stainless Steel Interior |
| Compliance | JB/T 5520–1991 |
| Brand | Yi Heng (Shanghai Yi Heng) |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | DKZ Series |
| Instrument Type | Constant-Temperature Shaking Bath |
| Circulation Mode | Internal & External Circulation |
| Temperature Control | Heating-Only |
| Bath Capacity | Model-Dependent (e.g., DKZ-1: 34 L |
| DKZ-2 | 48 L |
| DKZ-3 | 33 L) |
| Temperature Range | RT+5°C to 99°C (DKZ-1/DKZ-2/DKZ-3) / 10°C to 99°C (DKZ-2B/DKZ-3B) |
| Temperature Stability | ±0.3°C at setpoint (typical, under controlled ambient conditions) |
| Temperature Resolution | 0.1°C |
| Uniformity | ±1.0°C across bath volume (empty, 20°C ambient) |
| Oscillation Frequency | 30–180 rpm (infinitely variable) |
| Amplitude | 30 mm or 40 mm (user-selectable per order) |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 1250 W (DKZ-1), 1650 W (DKZ-2/DKZ-2B), 1500 W (DKZ-3/DKZ-3B) |
| Interior Dimensions (W×D×H, mm) | 438×310×250 (DKZ-1), 618×310×250 (DKZ-2), 440×300×250 (DKZ-3) |
| Exterior Dimensions (W×D×H, mm) | 643×350×353 (DKZ-1), 823×350×355 (DKZ-2), 710×410×710 (DKZ-3) |
| Construction | Stainless steel inner tank (SUS304 standard) |
| Brand | Yi Heng (Shanghai Yi Heng) |
|---|---|
| Origin | Shanghai, China |
| Model | DZF-6050 |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ±1°C |
| Ultimate Vacuum | 133 Pa |
| Interior Dimensions | 415 × 370 × 345 mm |
| Exterior Dimensions | 730 × 560 × 550 mm |
| Interior Material | Stainless Steel |
| Heating Method | Electric Resistance Heating |
| Power Input | 1400 W |
| Shelf Quantity | 2 pcs |
| Door | Double-Layer Tempered Glass with Silicone Sealing Gasket |
| Brand | Shanghai Yi Heng |
|---|---|
| Origin | Shanghai, China |
| Model | DZF-6090 |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10°C to 250°C |
| Temperature Uniformity | ±1°C |
| Internal Chamber Dimensions | 450 × 450 × 450 mm |
| External Dimensions | 610 × 680 × 1460 mm |
| Chamber Material | Stainless Steel (304) |
| Heating Method | Electric Resistive Heating |
| Power Input | 1150 W |
| Standard Configuration | Includes Vacuum Pump and Desiccator Chamber |
| Shelf Quantity | 2 pcs (independently configurable) |
| Door | Double-Layer Tempered Glass with Silicone Gasket Seal |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Yi Heng |
|---|---|
| Model | MPG-10C |
| Type | Refrigerated & Heated Circulating Bath |
| Bath Volume | 13 L |
| Temperature Range | −10 °C to +100 °C |
| Temperature Stability | ±0.2 °C |
| Pump Flow Rate | 4 L/min |
| Internal Dimensions (W×D×H) | 240 × 170 × 200 mm |
| Input Power | 2000 W |
| Circulation Mode | Internal & External |
| Control System | Microprocessor-Based PID Temperature Controller |
| Safety Features | Over-Temperature, Low-Level, and Dry-Run Protection |
| Brand | Yi Heng (Shanghai Yi Heng) |
|---|---|
| Origin | Shanghai, China |
| Model | PH Series |
| Instrument Type | Precision Forced-Air Oven |
| Temperature Range | RT+5–80 °C (Incubation Mode) |
| Temperature Uniformity | ±3% at 100 °C |
| Temperature Fluctuation | ±0.5 °C (Incubation) |
| Temperature Resolution | 0.1 °C |
| Heating Method | Forced-air convection |
| Power Input | 650–2450 W (model-dependent) |
| Working Environment | +5 to +35 °C |
| Timer Range | 0–5999 min |
| Standard Shelving | 2 adjustable stainless-steel shelves |
| Interior Material | Mirror-finish stainless steel |
| Door Seal | Silicone rubber gasket with double-layer tempered glass viewport |
| Safety Interlock | Automatic heating and fan shutoff upon door opening |
| Brand | YIHENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | High-Temperature Resistance Furnace |
| Instrument Type | Box Furnace |
| Maximum Temperature | 1600 °C |
| Rated Power | 4000 W |
| Heating Element | Kanthal A1 Resistance Wire |
| Internal Chamber Dimensions (W×D×H) | 200 mm × 400 mm × 160 mm |
| Control System | Microprocessor-Based PID Controller with 10-Step Programmable Ramp/Soak Function |
| Insulation Material | Ceramic Fiber Board |
| Chamber Lining Options | Refractory Brick (N-Series) or Ceramic Fiber Module |
| Safety Features | Automatic Power Cut-off on Door Opening, Over-Temperature Protection, Over-Current & Over-Voltage Protection |
| Construction | Stainless Steel Inner Door Liner and Exterior Panel |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | 9000 Series Forced-Air Drying Oven |
| Instrument Type | General-Purpose Laboratory Drying Oven |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 250°C |
| Temperature Fluctuation | ±0.1°C |
| Operating Ambient Temperature | +5°C to +40°C |
| Inner Chamber Material | Mirror-Finish Stainless Steel (AISI 304) |
| Heating Method | Forced-Air Convection via High-Temperature Fan |
| Temperature Uniformity | ±3% at 100°C |
| Control System | Microprocessor-Based P.I.D. Temperature Controller with Multi-Stage Programming, Digital Display, and Timer Function |
| Safety Features | Independent Over-Temperature Cut-Off Protection |
| Optional Accessories | RS485 Communication Interface, Thermal Printer Module |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | BP-150 |
| Instrument Type | Constant-Temperature Circulating Bath |
| Circulation Mode | Internal & External Loop |
| Temperature Control | Refrigeration & Heating |
| Bath Volume | 7 L |
| Temperature Range | −10 °C to 100 °C |
| Temperature Stability | ±0.02 °C |
| Input Power | 1200 W |
| Supply Voltage | 220 V / 50 Hz |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | BPG |
| Temperature Range | 100–500 °C (configurable A/B variants) |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±2 °C |
| Chamber Volume | 50–220 L |
| Power Input | 2.5–3.5 kW |
| Control System | PID-based Fuzzy Logic Controller |
| Working Environment | +5 to +40 °C |
| Timer Range | 1–9999 min |
| Standard Shelf Capacity | 2 adjustable stainless-steel shelves |
| Port | Ø25 mm side access port |
| Compliance | Designed for GLP-compliant thermal stability testing and routine laboratory drying applications |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | BPG |
| Instrument Type | High-Temperature Oven |
| Temperature Range | AH: RT+20°C to 400°C / BH: RT+20°C to 500°C |
| Temperature Uniformity | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | +5°C to +40°C |
| Interior Material | Mirror-Finish Stainless Steel (304) |
| Heating Method | Forced Convection via Adjustable-Speed Circulation Fan |
| Programmability | 7 Programs × 9 Steps Each (63 Total Steps) |
| Step Duration | 0–5999 Minutes |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Model | BPG-9040A, BPG-9070A, BPG-9140A, BPG-9240A, BPG-9420A |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 250°C |
| Temperature Uniformity | ±2.5% (at 100°C) |
| Temperature Fluctuation | ±1°C |
| Temperature Resolution | 0.1°C |
| Interior Dimensions (W×D×H, mm) | 350×320×350 / 400×350×500 / 500×360×800 / 520×460×1050 |
| Exterior Dimensions (W×D×H, mm) | 480×556×650 / 530×620×804 / 645×640×1110 / 665×730×1164 |
| Interior Material | Mirror-finish Stainless Steel |
| Heating Method | Forced-air Convection |
| Standard Shelving | 2–4 Adjustable Stainless Steel Shelves |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 850 W to 2450 W |
| Timer Range | 1–9999 min |
| Volume | 40 L to 420 L |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Instrument Type | Precision Forced-Air Drying Oven |
| Temperature Range | RT+10°C to 200°C (optionally up to 250°C) |
| Temperature Uniformity | ±2.5% (at 100°C test point) |
| Temperature Fluctuation | ±1°C |
| Temperature Resolution | 0.1°C |
| Working Environment | 5–40°C |
| Interior Material | Mirror-Finish Stainless Steel |
| Heating Method | Forced-Air Convection |
| Chamber Volume | 40 L / 80 L / 150 L / 250 L / 400 L |
| Interior Dimensions (W×D×H mm) | 350×300×400 / 400×320×550 / 500×380×750 / 600×450×900 / 1000×510×800 |
| Exterior Dimensions (W×D×H mm) | 505×655×600 / 550×660×750 / 655×715×980 / 755×785×1130 / 1140×850×1080 |
| Power Input | 850 W / 1100 W / 1550 W / 2050 W / 3000 W |
| Standard Shelving | 2 / 3 / 3 / 4 / 4 stainless steel adjustable shelves |
| Optional Features | Programmable 15-segment/30-step controller, RS-485/USB data export, thermal printer interface, independent over-temperature alarm system, 25 mm diameter access port (left side), viewing window (BPG9070A and larger models) |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BPG-9040A / BPG-9070A / BPG-9140A / BPG-9240A |
| Power Supply | AC 220 V, 50 Hz |
| Heating Power | 850 W – 2450 W |
| Temperature Range | RT+10 °C to 200 °C (standard) / up to 250 °C (optional) |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±2.5% of setpoint |
| Temperature Fluctuation | ±1 °C |
| Chamber Volume | 40 L – 250 L |
| Interior Dimensions (W×D×H, mm) | 350×320×350 – 520×460×1050 |
| Exterior Dimensions (W×D×H, mm) | 480×556×650 – 665×730×1164 |
| Standard Shelving | 2 adjustable stainless-steel shelves |
| Timer Range | 1–9999 minutes |
| Compliance | CE-marked design principles |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | BPG-9000 Series |
| Temperature Range | RT+10°C to 200°C (optional RT+10°C to 250°C) |
| Temperature Uniformity | ±2.5% at 100°C |
| Temperature Fluctuation | ±1°C |
| Temperature Resolution | 0.1°C |
| Chamber Material | AISI 304 Stainless Steel |
| Heating Method | Forced Convection with Adjustable-Speed Circulating Fan |
| Control System | Microprocessor-Based Programmable Controller (7 programs × 9 segments, max 63 segments total |
| segment time | 0–5999 min) |
| Optional Interfaces | RS-485, USB (for U-disk data export), Printer Port |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | BPG-9006 Series |
| Temperature Range | RT+10°C to 200°C (optional RT+10°C to 250°C) |
| Temperature Uniformity | ±2.5% (at 100°C), ±1.5% (at 100°C, high-uniformity configuration) |
| Temperature Fluctuation | ±1°C |
| Temperature Resolution | 0.1°C |
| Interior Material | AISI 304 Stainless Steel |
| Heating Method | Forced Convection (Hot Air Circulation) |
| Programmability | 7 programs × 9 steps each (63 total programmable steps), time range per step: 0–5999 min |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model Series | BPG-9006A |
| Instrument Type | Precision Drying Oven |
| Temperature Range | RT+10°C to 200°C (optional up to 250°C) |
| Temperature Uniformity | ±0.1°C |
| Temperature Resolution | 0.1°C |
| Interior Material | Mirror-Finish Stainless Steel |
| Heating Method | Forced-Air Circulation with Adjustable Airflow Velocity |
| Programmability | 7 programs × 9 segments (63 total steps), time range per segment: 0–5999 minutes |
| Safety Features | Independent Over-Temperature Limit Controller with Audible/Visual Alarm, Dual-Tier Thermal Protection (High-Temp & Deviation Alarms) |
| Energy Efficiency | Silicone Door Seal + Optimized Insulation Reducing Power Consumption by >25% vs. Conventional Designs |
| Data Interface Options | RS-485, USB (U-disk), Optional Printer Output |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | BPG-9040A |
| Instrument Type | Precision Drying Oven |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 250°C |
| Temperature Fluctuation | ±1°C |
| External Dimensions (W×D×H) | 505 × 655 × 600 mm |
| Control Range | RT+10°C to 200°C / RT+10°C to 250°C |
| Interior Chamber Dimensions (W×D×H) | 350 × 300 × 400 mm |
| Temperature Resolution | 0.1°C |
| Interior Material | Mirror-Finish Stainless Steel |
| Temperature Uniformity | ±2.5% (measured at 100°C) |