Environmental Monitoring Instruments
Filter
Showing 1291–1320 of 9029 results
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | CSD3 |
| Spectral Range | 400–1100 nm |
| Operating Temperature | -40 to +70 °C |
| Sunshine Signal Output | 1 ± 0.1 V (for direct irradiance > 120 W/m²) |
| Accuracy | >90% (monthly sunshine hours) |
| Accuracy | >90% (clear-sky direct signal) |
| Analog Output | 1 mV/(W/m²) |
| Long-term Drift | <2 %/year |
| Thermal Response | <0.1 °C |
| Response Time | <1 ms |
| Power Supply | 12 VDC |
| Integrated Heater | Yes |
| Desiccant Indicator | Visual humidity indicator |
| Connector | Waterproof M12 plug/socket |
| Brand | Kipp & Zonen |
|---|---|
| Origin | Netherlands |
| Model | CSD3 |
| Spectral Range | 400–1100 nm |
| Operating Temperature | −40 to +70 °C |
| Sunshine Signal Output | 1 ± 0.1 V (for direct irradiance > 120 W/m²) |
| Accuracy | >90% (monthly sunshine hours) |
| Accuracy | >90% (clear-sky direct signal) |
| Analog Output | 1 mV/(W/m²) |
| Long-term Drift | <2 %/year |
| Temperature Response | <0.1 °C |
| Response Time | <1 ms |
| Power Supply | 12 VDC |
| Built-in Heater | Yes |
| Desiccant Indicator | Integrated humidity indicator |
| Cable Connector | Waterproof IP68-rated mating connector |
| Brand | CTG |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ERAS |
| Pricing | Available Upon Request |
| Brand | CTG |
|---|---|
| Origin | UK |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HydroSense 115/45 |
| Price | Upon Request |
| Resonant Frequency | 115 kHz |
| Integrated Preamplifier | Yes |
| Preamplifier Type | Differential In / Differential Out |
| Preamplifier Gain | 45 dB |
| Receiving Sensitivity @ 110 kHz | −158 dB re 1 V/µPa into 100 Ω differential load |
| Recommended Frequency Range | 10 Hz – 150 kHz |
| Linear Frequency Range | 10 Hz – 40 kHz |
| Maximum Acoustic Input @ 110 kHz | 167 dB re 1 µPa |
| Power Supply | 20–34 V DC |
| Max Current Draw | 35 mA @ 30 V |
| Max Output Voltage | 3 Vrms |
| Low-Frequency Capacitance @ 1 kHz | 14 nF |
| Horizontal Directivity | Omnidirectional ±5 dB at 50 kHz |
| Vertical Beamwidth | >270° ±3 dB |
| Dimensions | Ø50 mm × 245 mm |
| Sensor Head Weight (Air) | ~1.7 kg |
| Sensor Head Weight (Water) | ~1.2 kg |
| Max Operational Depth | 850 m |
| Survival Depth | 425 m |
| Operating Temperature Range | −5 °C to +35 °C |
| Cable | 5 m triple-shielded twisted-pair |
| Connector | Bare-ended leads |
| Brand | CTG |
|---|---|
| Origin | United Kingdom |
| Model | Hydrosense |
| Type | Pre-amplified underwater acoustic transducer |
| Frequency Range | Wideband (typical coverage: 10 Hz – 200 kHz, dependent on configuration) |
| Directivity | Omnidirectional in horizontal plane |
| Sensitivity | High receive sensitivity (typical −165 dB re 1 V/µPa, integrated preamplifier) |
| Signal-to-Noise Ratio | Optimized for low-noise environmental monitoring |
| Operating Depth | Up to 1000 m (standard version) |
| Compliance | Designed per ISO 18405, IEC 60565, and ASTM E1002 for hydrophone calibration and field deployment |
| Output Interface | Low-impedance voltage output, BNC or LEMO connector |
| Environmental Rating | IP68, corrosion-resistant titanium or stainless-steel housing |
| Brand | CTG |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | UviLux FUEL-BTEX |
| Instrument Type | Online |
| Measurement Principle | Fluorescence Spectrophotometry |
| Measurement Range | 3.0–50,000 ppb (as BTEX-equivalent) |
| Detection Limit | 20 ppb (LOD) |
| Accuracy | ±3% of reading |
| Resolution | 3 ppb |
| Measurement Frequency | 10 Hz |
| Sensitivity (QSU) | 0.06 QSU/ppb |
| Calibration Range | 0–600 QSU |
| Max Operating Depth | 1000 m |
| Operating Temperature | −2 °C to 40 °C |
| Storage Temperature | −40 °C to 70 °C |
| Dimensions | Ø70 mm × 149 mm |
| Weight | 800 g (air), 150 g (water) |
| Housing Material | Acetal C |
| Connector | MCBH6MP (wet-mateable) |
| Supply Voltage | 9–36 V DC |
| Power Consumption | <1 W @ 12 V |
| Brand | CTG |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | UviLux |
| Instrument Type | Online |
| Measurement Principle | Ultraviolet-Induced Fluorescence Spectrometry |
| Measurement Range | 0.005–200 µg/L (as hydrocarbons or PAHs) |
| Detection Limit | 0.005 µg/L |
| Sampling Frequency | 0.1–3 Hz |
| Dimensions | Ø70 mm × 149 mm |
| Air Weight | 0.8 kg |
| In-Water Buoyant Weight | 0.15 kg |
| Pressure Rating | 600 m |
| Housing Material | Acetal C |
| Electrical Interface | Subcon MCBH6M |
| Supply Voltage | 9–36 V DC |
| Power Consumption | <1 W @ 12 V |
| Operating Temperature | −2 to +40 °C |
| Storage Temperature | −40 to +70 °C |
| Output Options | RS232 (standard), 0–5 V analog (standard), RS422 or SDI-12 (optional) |
| Software | Windows-based GUI included |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | CTL-12 |
| Pricing | Available Upon Request |
| Detection Limit | 5 mg/L COD |
| Measurement Range | 20–1200 mg/L COD |
| Repeatability | ≤0.87% |
| Optical Stability | 0.001 A/5 min |
| Sample Throughput | Up to 12 samples per batch |
| Digestion Time | 10 min at 165 °C |
| Measurement Wavelength | 610 nm |
| Chloride Interference Tolerance | ≤900 mg/L Cl⁻ (open-tube mode) |
| Data Storage | 9 pre-programmed calibration curves |
| Display | 5-digit LED (time, date, absorbance, concentration, slope) |
| Power Supply | 220 V, 50 Hz, 200–700 W |
| Brand | -- |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | CU-502 |
| Pricing | Available Upon Request |
| Measurement Principle | AC-modulated Absorption Photometry (Dual-beam Reference LED Architecture) |
| Target Analyte | Cu²⁺ in Acidic Sulfate Electrolytes |
| Measuring Range (Cu) | 0–20 g/L, 0–50 g/L, 0–80 g/L (user-selectable) |
| Measuring Range (CuSO₄) | 0–100 g/L, 0–200 g/L, 0–300 g/L (correlated) |
| Resolution | 0.1 g/L (Cu), 1 g/L (CuSO₄) |
| Repeatability | ±2% FS |
| Response Time | ≤5 s (t₉₀) |
| Operating Temperature | −5 °C to +40 °C |
| Relative Humidity | ≤85% RH (non-condensing) |
| Power Supply | AC 85–240 V, 50/60 Hz |
| Output Signal | Isolated 4–20 mA DC (HART-compatible loop) |
| Enclosure | IP65-rated front panel, DIN 96×96 mm cutout |
| Dimensions (H×W×D) | 96 × 96 × 163 mm |
| Weight | ~1.3 kg |
| Brand | Kasuri Rikka |
|---|---|
| Origin | Japan |
| Model | CU-5Z |
| Instrument Type | Portable |
| Ion Detection Capability | Multi-ion (Cu²⁺-optimized) |
| Measurement Principle | UV-Vis Spectrophotometry (LED-based, dual-wavelength with reference light) |
| Measuring Range | Cu²⁺: 0.0–76.3 g/L |
| CuSO₄ | 0.0–300 g/L |
| Molarity | 0.000–1.200 mol/L |
| Detection Limit | 0.1 g/L (as Cu) |
| Accuracy | ±2% of theoretical value (under controlled calibration conditions) |
| Response Time | 1 s |
| Operating Temperature | 5–45 °C |
| Relative Humidity | ≤85% RH |
| Power Supply | 3× AAA alkaline batteries (LR03), auto-off after 30 min |
| Dimensions | 38 mm (H) × 75 mm (W) × 180 mm (D) |
| Weight | ~300 g |
| Sensor Material | Chemically resistant alloy with inert optical interface |
| Temperature Compensation | Automatic (NTC-based) |
| Display | 3½-digit LCD |
| Brand | -- |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CU-5Z |
| Price | Upon Request |
| Measurement Principle | Absorption Photometry |
| Measurement Ranges | 0.000–1.200 mol/L (Cu²⁺ molar concentration) |
| Accuracy | ±2% FS (under specified calibration and environmental conditions) |
| Resolution | 0.001 mol/L |
| Calibration | Two-point calibration using certified Cu²⁺ standard solutions |
| Temperature Compensation | Automatic (NTC sensor integrated in CUD-61 electrode) |
| Display | 3½-digit LCD |
| Operating Environment | −5°C to +45°C, ≤85% RH (non-condensing) |
| Power Supply | DC 4.5 V (3 × AA alkaline batteries), auto-power-off after 30 min idle |
| Dimensions (main unit) | 75(W) × 180(D) × 38(H) mm |
| Weight | ~300 g (main unit), ~550 g (CUD-61 electrode with 2 m cable) |
| Standard Configuration | Main unit, CUD-61 copper-selective electrode (2 m coaxial cable), instruction manual, certificate of conformity |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AAG-1000 |
| Negative Ion Output | ≥ 3 × 10⁶ pcs/cm³ |
| Residual Ozone Concentration | ≤ 0.05 ppm |
| Operating Voltage | 21–27 V DC |
| Operating Current | ≤ 30 mA |
| Output High Voltage | –3.5 ± 0.5 kV (1 G) |
| Protection Impedance | 20 ± 2 MΩ |
| Dielectric Withstand Voltage | ≥ 3750 V AC |
| Dimensions | 67.8 × 44.9 × 22 mm (W × H × D) |
| EMC Compliance | ISO 11452-4 & ISO 16750-2 |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | ACDS-1001 |
| Detection Principle | Dual-channel NDIR (Non-Dispersive Infrared) |
| Gas Measured | CO₂ |
| Measurement Range | 0–10,000 ppm (extended capability up to 40,000 ppm) |
| Resolution | 1 ppm |
| Accuracy | ±(50 ppm + 5% of reading) |
| Response Time (T90) | ≤25 s |
| Data Refresh Rate | ≤1 s |
| Output Interface | LIN bus |
| Operating Temperature | −40 °C to +85 °C |
| Storage Temperature | −40 °C to +95 °C |
| Relative Humidity Range | 0–99% RH (non-condensing) |
| Operating Pressure | 80–120 kPa |
| IP Rating | IP54 |
| Supply Voltage | 9–16 VDC (nominal 12 VDC) |
| Average Current Consumption | ≤100 mA @ 12 VDC |
| Standby Current | <100 µA |
| Design Lifetime | 15 years |
| Compliance | AEC-Q200 qualified circuit architecture, automotive-grade EMI/EMC robustness |
| Brand | Cubic |
|---|---|
| Model | AFG-1000 |
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Pricing | Upon Request |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AIS-3200 |
| Detection Gases | PM2.5 (0–1000 µg/m³), CO₂ (400–10,000 ppm) |
| PM2.5 Principle | Laser Scattering |
| CO₂ Principle | Single-Source NDIR with Dual-Channel Detection |
| PM2.5 Accuracy | ±15% of reading or ±15 µg/m³ (−20°C to +75°C, referenced to TSI 8530) |
| CO₂ Accuracy | ±100 ppm or ±10% (400–10,000 ppm, −20°C to +75°C) |
| PM2.5 Response Time (T90) | ≤12 s |
| CO₂ Response Time (T90) | ≤25 s |
| Warm-up Time | <10 s |
| Operating Temperature | PM2.5: −40°C to +75°C |
| CO₂ | −40°C to +85°C |
| Storage Temperature | −40°C to +95°C |
| IP Rating | IP65 |
| Dimensions | Compact, automotive-grade form factor |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AM1002 |
| Detection Principle | Laser Scattering (PM) / Metal Oxide Semiconductor (VOC) |
| PM Range | 0–5000 µg/m³ |
| VOC Range | 0–10 ppm |
| PM1.0/PM2.5 Accuracy | ±10 µg/m³ (0–100 µg/m³), ±10% reading (101–500 µg/m³) |
| PM10 Accuracy | ±25 µg/m³ (0–100 µg/m³), ±25% reading (101–500 µg/m³) |
| VOC Accuracy | ±15% (@0.3–1 ppm), ±25% (@30 ppm) |
| Warm-up Time | ≤180 s (VOC) |
| Data Refresh Rate | 1 Hz |
| Operating Temp. | −20–60 °C |
| Operating RH | 0–95% RH (non-condensing) |
| Storage Temp./RH | −40–80 °C / 0–95% RH |
| Supply Voltage | DC 5 V ±0.5 V (ripple <50 mV) |
| Interfaces | UART (3.3 V/5 V), I²C (3.3 V/5 V) |
| Dimensions | 38 × 35 × 12 mm |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AM1008 |
| Price | USD 72 (FOB) |
| PM2.5 Range | 0–1000 µg/m³ |
| CO₂ Range | 400–5000 ppm |
| VOC Scale | 0–3 (Relative Index) |
| Update Interval | 1 s |
| Operating Temperature | −10 °C to +50 °C |
| Storage Temperature | −20 °C to +60 °C |
| Supply Voltage | DC 5 V ±0.1 V |
| Current Consumption | <300 mA |
| Communication Interfaces | UART-TTL, I²C |
| Dimensions | 80 × 50 × 13.6 mm (W×H×D) |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AM1008L |
| Price | USD 34.50 (FOB) |
| Detection Principle | Laser Scattering (PM), Metal-Oxide Semiconductor (VOC) |
| Particle Size Resolution | 0.3 µm |
| PM Range | 0–1000 µg/m³ |
| VOC Range | 0–10 ppm |
| PM Accuracy | ±10 µg/m³ (≤100 µg/m³), ±10% RDG (>100 µg/m³) for PM1.0/PM2.5 |
| VOC Accuracy | ±0.25 ppm (0–1 ppm), ±25% RDG (1–10 ppm) |
| Refresh Rate | 1 s |
| Operating Temp. | −10 to +50 °C |
| Humidity Range | 5–95% RH (non-condensing) |
| Storage | −20 to +60 °C, 0–95% RH |
| Supply Voltage | DC 5 V ±0.2 V (ripple <100 mV) |
| Operating Current | ≤100 mA |
| Standby Current | ≤200 µA (SET pin low) |
| Interface | UART TTL @ 3.3 V logic level |
| Dimensions | 48 × 40 × 12 mm (W×H×D) |
| Shielding | Full-metal EMI shielding |
| Compliance | RoHS, CE-EMC, FCC Part 15 Subpart B |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AM1009 |
| Detection Principles | Laser Light Scattering (PM), Metal Oxide Semiconductor (VOC, NOₓ, CO, HC) |
| PM Range | 0–5000 µg/m³ |
| VOC Range | 0–10 ppm |
| NO₂ Range | 0–10 ppm |
| PM Accuracy | ±10 µg/m³ (0–100 µg/m³), ±10% reading (101–500 µg/m³) for PM₁.₀/PM₂.₅ |
| Data Update Interval | 1 s |
| Power-On Stabilization Time | ≤180 s (VOC channel) |
| Operating Temp. | −10 to +60 °C |
| Operating RH | 5–95% RH (non-condensing) |
| Storage Temp./RH | −30 to +70 °C / 0–95% RH (non-condensing) |
| Supply Voltage | DC 5 V ±0.1 V, ripple <50 mV |
| Interfaces | UART (3.3 V / 5 V logic), I²C (5 V logic) |
| Dimensions | 50 × 38 × 21 mm (W × H × D) |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AM1009CN |
| Detection Principles | Optical Scattering (PM2.5), Electrochemical/Semiconductor (CO), NTC Thermistor (Temperature) |
| Measurement Ranges | PM2.5: 0–5000 µg/m³ |
| CO | 0–1000 ppm |
| Temperature | −10–60 °C |
| Accuracy | PM2.5: ±20% of reading or ±200 µg/m³ |
| CO | ±30% of reading or ±40 ppm |
| Temperature | ±1 °C |
| Alarm Thresholds | PM2.5 ≥ 2000 µg/m³ |
| Data Update Interval | 1 s |
| Operating Conditions | −10–60 °C, 0–95% RH (non-condensing) |
| Storage Conditions | −30–70 °C, 0–95% RH (non-condensing) |
| Supply Voltage | DC 12 V ± 0.5 V, Ripple < 100 mV |
| Average Current Consumption | < 100 mA |
| Output Interface | Digital Switch Output (configurable for CAN bus upon request) |
| Dimensions | 100 × 60 × 24.5 mm (W × H × D) |
| Minimum Detectable Particle Size | 0.3 µm |
| Sampling Method | Constant-Flow Aspiration |
| Calibration | Auto-compensated CO baseline correction |
| Compliance | RoHS-compliant design |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | AM1012 |
| Price | USD 72 (FOB) |
| Detection Parameters | PM2.5 (0–1000 µg/m³), CO₂ (400–2000 ppm), Temperature (−10°C to 50°C), Relative Humidity |
| Refresh Rate | 1 s |
| Power Supply | DC 12 V ±1 V |
| Current Consumption | <500 mA |
| Communication Interface | RS485 |
| Dimensions | 81.3 × 74.3 × 25.9 mm |
| EMC Performance | Built-in voltage regulation, ESD protection (>±8 kV contact discharge), conducted/radiated immunity compliant with IEC 61000-4 series |
| Operating Humidity Range | 0–95% RH non-condensing |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AM1050 |
| Detection Range | ≥0.3 µm, 0–9,999,999 pcs/L |
| Output Channels | 0.3, 0.5, 1.0, 2.5, 5.0, 10.0 µm |
| Counting Efficiency | 50% @ 0.3 µm |
| Operating Temperature | −30°C to +70°C |
| Storage Temperature | −40°C to +85°C |
| Supply Voltage | DC 5 V ±0.1 V or DC 9–36 V |
| Current Draw | <500 mA @ 5 V, <300 mA @ 9 V, <100 mA @ 36 V |
| Communication Interface | RS-485 / 4–20 mA (customizable) |
| Dimensions | 100 × 115 × 40 mm (W × D × H) |
| Compliance | JJF 1190–2008 Calibration Specification for Airborne Particle Counters |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AM4203H |
| Pricing | Available Upon Request |
| Measurement Principle | Non-Dispersive Infrared (NDIR) |
| Target Gases | R32, R454A, R454B, R454C, R290 (A2L & A3 refrigerants) |
| Measurement Range | 0–100% LFL |
| Accuracy | ±2.5% LFL (0–25% LFL), ±10% of reading (25–100% LFL) |
| Resolution | 0.1% LFL |
| Response Time (T90) | ≤30 s |
| Output Interfaces | RS485 Modbus RTU, Relay (dry contact) |
| Enclosure Rating | IP54 |
| Operating Temperature | −30 to +70 °C |
| Operating Humidity | 0–95% RH (non-condensing) |
| Storage Conditions | −40 to +85 °C, 0–95% RH (non-condensing) |
| Power Supply | AC 18–36 V (24 V nominal, 55±8 Hz) or DC 12–36 V (24 V nominal) |
| Service Life | >15 years |
| Dimensions | 103.2 × 80 × 30.5 mm (customization available) |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AM4205 |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Detection Range | 0–50% LFL |
| Resolution | 1% LFL |
| Accuracy | ±3.75% LFL |
| Data Refresh Rate | ≤1 s |
| Response Time (T90) | <30 s |
| Warm-up Time (T25) | ≤7 s |
| Output Options | UART / 0.8–4 V (default) / PWM (customizable) |
| Operating Temperature | −30 to +60 °C |
| Operating Humidity | 0–95% RH (non-condensing) |
| Storage Conditions | −30 to +70 °C / 0–95% RH (non-condensing) |
| Supply Voltage | 5 ± 0.1 V DC (ripple <50 mV) |
| Average Current Consumption | ≤150 mA |
| Peak Current | <300 mA |
| IP Rating | IP54 |
| Heating Function | Integrated self-heating element for anti-condensation and frost prevention |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AM4207 |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Measurement Range | 0–50% LFL |
| Accuracy | ±5% LFL |
| Response Time (T50) | ≤10 s |
| Operating Temperature | −40 °C to +85 °C |
| Storage Temperature | −40 °C to +85 °C |
| Humidity Range | 0–100% RH |
| Supply Voltage | DC 9–36 V |
| Current Consumption | <250 mA |
| Communication Interface | CAN bus |
| Protection Rating | IP67 (detector housing), IP65 (sensor head) |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | Domestic (China) |
| Model | AM4209 |
| Pricing | Available Upon Request |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Maximum Sensitivity | 1 g/year (static), 3 g/year (dynamic) |
| Refrigerant Compatibility | HFOs (e.g., 1234yf, 1234ze), A2L-class refrigerants, and common blends (R-134a, R-410A, R-32) |
| Alarm Output | Visual (red LED + LCD bar graph + numeric display), Audible (buzzer), Tactile (vibration) |
| Response Time | <1 second |
| Power Source | Rechargeable Lithium-ion Battery / 10-hour runtime |
| Display | Backlit LCD with real-time concentration readout |
| Operating Environment | 0°C to 40°C (32°F to 104°F), <75% RH (non-condensing) |
| Ingress Protection | IP54 |
| Key Features | High measurement accuracy, long-term stability, rapid response, poison-resistant sensor architecture, electromagnetic interference (EMI) robustness |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AM6108B |
| Instrument Type | Online Monitoring Controller |
| CO₂ Detection Principle | Non-Dispersive Infrared (NDIR) |
| PM₂.₅ Detection Principle | Optical Scattering |
| Formaldehyde Detection Principle | Electrochemical Sensing |
| Measurement Range | PM₂.₅: 0–1000 µg/m³ |
| CO₂ | 0–5000 ppm |
| Formaldehyde | 0–0.5 mg/m³ (up to 1 mg/m³) |
| Temperature | −10°C to +50°C |
| Relative Humidity | 0–95% RH |
| Data Update Interval | 1 s |
| Operating Voltage | DC 12 V |
| Current Consumption | <140 mA |
| Communication Interface | RS485 |
| Dimensions | 86 mm × 86 mm × 24.9 mm (W×H×D) |
| Mounting Options | Embedded or Wall-Mounted |
| Control Output | Three-Speed Fan Regulation, Supply/Exhaust Switching, Mode Selection (Smart/Manual/Silent/Time-Scheduled) |
| Optional Feature | Filter Replacement Alert |
| Sensor Configuration | Modular — PM₂.₅, CO₂, Formaldehyde, Temperature & Humidity sensors selectable per application requirement |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | APMS-3302 |
| Price | USD 78 (FOB) |
| Detection Principle | Laser Scattering (Mie Theory) |
| PM2.5 Range | 0–1000 µg/m³ |
| Accuracy | ±15% of reading or ±15 µg/m³ (at –20°C to +60°C, referenced to TSI AM510/8530) |
| Operating Temperature | –30°C to +70°C |
| Storage Temperature | –40°C to +85°C |
| Ingress Protection | IP5K4 |
| Supply Voltage | DC 9–16 V |
| Communication Interface | LIN 2.2A |
| Output Options | PM2.5 mass concentration (µg/m³) |
| Response Time | <3 s (dynamic airflow, vehicle motion conditions) |
| Laser Source Lifetime | >50,000 hours |
| Optical Chamber | Self-cleaning lens structure with hydrophobic coating |
| Calibration Traceability | NIST-traceable reference aerosols (ISO 2591-1, ISO 12103-1 A2 test dust) |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | APMS-5000 |
| Price | Upon Request |
| Detection Principle | Laser Light Scattering |
| Measurement Range | 0–1000 µg/m³ |
| Accuracy | ±10% (100–1000 µg/m³) and ≤±10 µg/m³ (0–100 µg/m³) at –20–50°C |
| Extended Accuracy | ±20% (100–1000 µg/m³) and ≤±20 µg/m³ (0–100 µg/m³) at –40––20°C & 50–70°C |
| Particle Size Range | 0.3–2.5–10 µm |
| Operating Environment | –40 to +85°C, 0–95% RH (non-condensing) |
| Communication Interface | LIN Bus |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | AQM-1020 |
| Pricing | Available Upon Request |
| Sensing Principle | Metal Oxide Semiconductor (MOX) |
| Target Gases | CO, NO₂, NH₃ (optional) |
| Maximum Gas Flow Rate | ≤10 m/s |
| Operating Temperature | −40 °C to +85 °C |
| Storage Temperature | −40 °C to +120 °C |
| Relative Humidity Range | 0–99% RH (non-condensing) |
| Supply Voltage | 9–16.2 V DC (nominal 12 V DC) |
| Operating Current | ≤40 mA |
| Standby Current | ≤100 µA |
| Ingress Protection | IP6K7 |
| Communication Interface | LIN bus / PWM output |