High Low Temperature Test Chamber
Filter
Showing 151–180 of 429 results
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Partner |
| Country of Origin | China |
| Model | JH-2026 |
| Price Range | USD 850–8,500 (FOB Shanghai) |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Dual-stage Mechanical Compression System |
| Explosion-Proof Configuration | Available (ATEX/IECEx-compliant variant) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C (per IEC 60068-3-5) |
| Temperature Deviation | ±2.0 °C (at load center) |
| Heating Rate | ≤60 min (−70 °C → +150 °C) |
| Cooling Rate | ≤45 min (25 °C → −70 °C), ≤60 min (150 °C → −70 °C), ≤80 min (full thermal shock cycle per MIL-STD-810H Method 503.5) |
| Interior Dimensions | Custom-engineered (standard base: W600 × D600 × H600 mm |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Partner |
| Country of Origin | China |
| Model | JH-2026 |
| Price Range | USD 850 – 8,500 (FOB Shanghai) |
| Temperature Range | -70°C to +150°C |
| Refrigeration Method | Dual-Stage Mechanical Compression System |
| Explosion-Proof Certification | Ex d IIB T4 Gb / Ex tb IIIC T135°C Db (IEC 60079-0, -1, -31) |
| Temperature Fluctuation | ±0.5°C (at setpoint, steady state) |
| Temperature Uniformity | ±2.0°C (per IEC 60068-3-5) |
| Temperature Deviation | ±2.0°C (per IEC 60068-3-10) |
| Heating Rate | ≤60 min (from -40°C to +150°C, empty chamber) |
| Cooling Rate | ≤45 min (from +150°C to -40°C), ≤60 min (-40°C to -70°C), ≤80 min (full thermal span) |
| Interior Dimensions | Custom-engineered per user specification (L×W×H in mm) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH-ATL Series |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-Based Cooling |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from -40 °C to +85 °C) |
| Cooling Rate | ≤45–80 min (depending on test profile and chamber load) |
| Internal Chamber Dimensions | Customizable |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Jianhu JH-Battery Dual-Chamber High-Low Temperature Test Chamber |
| Price Range | USD 1,100 – 11,000 |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Compressor-Based Cooling |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (−40 °C to +85 °C) |
| Cooling Rate | ≤45–80 min (room temp to −40 °C) |
| Interior Dimensions | Customizable (Standard Options: Upper Chamber 200 L / Lower Chamber 300 L) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH-Battery Multi-Environment Composite Test Chamber |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-based |
| Explosion-Proof Rating | ATEX Ex d IIB T4 certified |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from -40 °C to +85 °C) |
| Cooling Rate | ≤45–80 min (depending on configuration) |
| Chamber Dimensions | Customizable (Small / Medium / Large) |
| Brand | Jianhu |
|---|---|
| Model | JH-BT Series |
| Temperature Range | -70°C to +150°C |
| Cooling Method | Compressor-based Refrigeration |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5°C |
| Temperature Deviation | ±2.0°C |
| Temperature Uniformity | ±2.0°C |
| Transfer Time (Two-Zone Design) | ≤10 s |
| Stabilization Time | ≤5 min |
| Compliance | IEC 60068-2-14, IEC 60068-2-15, GB/T 2423.22, GB/T 2423.34 |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-BT Series |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-based |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from -40 °C to +85 °C) |
| Cooling Rate | ≤45–80 min (depending on test profile and load) |
| Chamber Dimensions | Customizable internal workspace |
| Control Response Time | Millisecond-level sensor feedback and actuator activation |
| Safety Architecture | Full-cycle closed-loop safety monitoring with real-time gas detection, emergency power cutoff, thermal runaway suppression, and remote IoT alerting |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-BT Series |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-based Cooling |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from -40 °C to +85 °C) |
| Cooling Rate | ≤45 min (from +85 °C to -40 °C) |
| Interior Dimensions | Customizable (Small / Medium / Large) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-BT-RTS Series |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-based Cooling |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Temperature Uniformity | ±2.0 °C |
| Heating Rate (Typical) | ≤60 min (from –40 °C to +85 °C) |
| Cooling Rate (Typical) | ≤45 min / ≤60 min / ≤80 min (depending on configuration and load) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-CL5G |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-based |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from -40 °C to +85 °C) |
| Cooling Rate | ≤45–80 min (depending on setpoint and load) |
| Chamber Dimensions | Customizable internal workspace |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH-CT Series |
| Price Range | USD 900 – 90,000 |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-based Cooling |
| Explosion-Proof Configuration | Available |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C (per IEC 60068-3-5) |
| Temperature Deviation | ±2.0 °C (per ISO 16750-4) |
| Heating Rate | ≤60 min (from -40 °C to +85 °C) |
| Cooling Rate | ≤45 min / ≤60 min / ≤80 min (depending on chamber volume and configuration) |
| Working Chamber Dimensions | Customizable (standard internal volumes: 50 L to 1000 L) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-CTC Series |
| Temperature Range | -70 °C to +150 °C |
| Cooling Method | Compressor-based Refrigeration |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from −40 °C to +150 °C) |
| Cooling Rate | ≤45 min / ≤60 min / ≤80 min (from +150 °C to −40 °C, depending on configuration) |
| Internal Chamber Dimensions | Customizable (W × H × D) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-CTC Series |
| Temperature Range | -70 °C to +150 °C |
| Cooling Method | Compressor-based Refrigeration |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Temperature Uniformity | ±2.0 °C |
| Heating Rate | ≤60 min (from -40 °C to +150 °C) |
| Compliance | JESD22-A104, MIL-STD-202, IEC 60068-2-14, GB/T 2423.22 |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Partner |
| Country of Origin | China |
| Model | JH-CTE Series (Custom Engineered) |
| Price Range | USD 950 – 9,500 (FOB Shanghai) |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Dual-stage Mechanical Compression System |
| Explosion-Proof Configuration | Available (ATEX/IECEx-compliant variants) |
| Temperature Fluctuation | ±0.5 °C (at setpoint, steady state) |
| Temperature Uniformity | ±2.0 °C (per IEC 60068-3-5) |
| Temperature Deviation | ±2.0 °C (vs. reference sensor, per ISO 16750-4) |
| Ramp-Up Time | ≤60 min (−40 °C to +85 °C, empty chamber) |
| Ramp-Down Time | ≤45 min (25 °C to −40 °C), ≤60 min (25 °C to −55 °C), ≤80 min (25 °C to −70 °C) |
| Internal Chamber Dimensions | Fully Customizable (standard base modules: W600×D600×H600 mm to W2000×D1500×H1800 mm) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Partner |
| Country of Origin | China |
| Model | JH-CTH Series (2025–2026 Standard Configuration) |
| Price Range | USD 700 – 7,000 |
| Temperature Range | −70 °C to +150 °C |
| Cooling Method | Dual-stage Compression Refrigeration (Bitzer Compressor) |
| Explosion-Proof Design | Available (ATEX/IECEx-compliant option) |
| Temperature Fluctuation | ±0.2 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Ramp Rate (Heating) | ≤60 min (−70 °C → +150 °C) |
| Ramp Rate (Cooling) | ≤45–80 min (+150 °C → −70 °C), configurable per test profile |
| Internal Chamber Dimensions | Custom-engineered (standard base: W600 × D600 × H600 mm |
| Control System | 10.1″ HD Touchscreen HMI with Embedded Linux OS |
| Data Logging | 200,000-cycle non-volatile storage |
| Communication Interfaces | RS485 (Modbus RTU), Ethernet (TCP/IP), optional OPC UA |
| Compliance | GB/T 2423.22–2012, IEC 60068-2-14, MIL-STD-810H, ISO 16750-4, ASTM D5229/D5229M (cold-hot cycling), GLP/GMP-ready audit trail (FDA 21 CFR Part 11 compliant firmware optional) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Partner |
| Country of Origin | China |
| Model | JH-CTH Series |
| Price Range | USD 950 – 95,000 (FOB Shanghai) |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Dual-stage Mechanical Compression System |
| Explosion-Proof Configuration | Available (ATEX/IECEx-compliant enclosure option) |
| Temperature Fluctuation | ±0.5 °C (at setpoint, steady-state) |
| Temperature Uniformity | ≤2.0 °C (within working chamber) |
| Temperature Deviation | ±2.0 °C (vs. reference sensor per GB/T 2423.22–2012) |
| Ramp-Up Time | ≤60 min (−70 °C → +150 °C, empty chamber) |
| Ramp-Down Time | ≤45 min / ≤60 min / ≤80 min (configurable based on chamber volume and thermal mass) |
| Interior Dimensions | Custom-engineered per IEC 60068-2-14 and GB/T 2423.22 requirements |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-ELT Series |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-based |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from 25 °C to +150 °C) |
| Cooling Rate | ≤45 min (25 °C to -40 °C), ≤60 min (25 °C to -55 °C), ≤80 min (25 °C to -70 °C) |
| Interior Dimensions | Customizable |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH-ET Series |
| Price Range | USD 1,200 – 12,000 (FOB Shanghai) |
| Temperature Range | −70 °C to +150 °C |
| Cooling Method | Liquid Nitrogen Assisted Refrigeration |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (−40 °C to +85 °C) |
| Cooling Rate | ≤45 min (25 °C to −40 °C), ≤60 min (25 °C to −55 °C), ≤80 min (25 °C to −70 °C) |
| Interior Dimensions | Customizable |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-ETC Series |
| Temperature Range | -70 °C to +150 °C |
| Humidity Range | 20–98% RH |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Refrigeration Method | Compressor-based |
| Explosion-Proof Design | Yes |
| Compliance | ISO 16232, GB/T 28046 |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH-ETC Series |
| Price Range | USD 4,200 – 42,000 |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Mechanical Compression Cooling |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Temperature Uniformity | ±2.0 °C |
| Heating Rate (Empty) | ≤60 min (−70 °C → +150 °C) |
| Cooling Rate (Empty) | ≤45 min / ≤60 min / ≤80 min (depending on configuration) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH-ETC Series |
| Price Range | USD 450 – 4,500 |
| Temperature Range | -70 °C to +150 °C |
| Cooling Method | Compressor-Based Refrigeration |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from -40 °C to +85 °C) |
| Cooling Rate | ≤45 min (from +85 °C to -40 °C) |
| Internal Chamber Dimensions | Customizable (Small / Medium / Large Configurations) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-LLT Series (Lithium Battery & Advanced Materials) |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-Based Cascade Refrigeration |
| Explosion-Proof Design | Yes (ATEX/IECEx-compliant enclosure option available) |
| Temperature Uniformity | ±2.0 °C (within working volume) |
| Temperature Stability (Fluctuation) | ±0.5 °C |
| Temperature Deviation (Accuracy) | ±2.0 °C |
| Heating Rate | ≤60 min (from -40 °C to +85 °C) |
| Cooling Rate | ≤45 min (from +25 °C to -40 °C), ≤60 min (to -55 °C), ≤80 min (to -70 °C) |
| Compliance | Designed to support ISO 16750-4, IEC 62133-2, UN 38.3, GB/T 2423.1/2/22, and MIL-STD-810H environmental test protocols |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH-Nylon Conditioning & Humidification System |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Compressor-based |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (−70 °C → +150 °C) |
| Cooling Rate | ≤45 min (25 °C → −40 °C), ≤60 min (25 °C → −55 °C), ≤80 min (25 °C → −70 °C) |
| Chamber Dimensions | Custom configurations available upon technical consultation |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-Nylon Conditioning & Hydrothermal Treatment Chamber |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Compressor-based |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (−70 °C → +150 °C) |
| Cooling Rate | ≤45 min / ≤60 min / ≤80 min (varies by setpoint and load) |
| Construction | Insulated chamber with vapor-tight sealing, corrosion-resistant epoxy flooring, and integrated air recirculation system |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-Nylon Conditioning Chamber |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-based Cooling |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Heating Rate | ≤60 min (from -40 °C to +85 °C) |
| Cooling Rate | ≤45 min (from 25 °C to -40 °C), ≤60 min (to -70 °C), ≤80 min (full range) |
| Compliance | ISO 17025-relevant environmental control architecture, GLP-aligned operational logging capability, compatible with ASTM D5229/D618 moisture conditioning protocols |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-Nylon Moisture Conditioning Chamber |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration | Compressor-based |
| Explosion-Proof | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (−70 °C to +150 °C) |
| Cooling Rate | ≤45–80 min (depending on setpoint and load) |
| Compliance | ISO 17025-supporting environmental control, ASTM D5229/D618-compatible conditioning protocols, GLP-aligned operation log retention |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH-PA Nylon Conditioning & Humidification Chamber |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Compressor-based |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (−70 °C → +150 °C) |
| Cooling Rates | ≤45 min (25 °C → −40 °C), ≤60 min (25 °C → −55 °C), ≤80 min (25 °C → −70 °C) |
| Internal Chamber Dimensions | Custom-configurable — contact technical support for dimensional specifications and volume options |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Partner |
| Country of Origin | China |
| Model | JH-RTP Series |
| Price Range | USD 800 – 8,000 (FOB Shanghai) |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Dual-stage Cascade Compressor System |
| Explosion-Proof Design | Optional ATEX/IECEx-certified variant available |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (−70 °C → +150 °C) |
| Cooling Rate | ≤45 min (25 °C → −40 °C), ≤60 min (25 °C → −55 °C), ≤80 min (25 °C → −70 °C) |
| Interior Dimensions | Custom-engineered per application (standard range: 100–1000 L) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-SEM Series |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-Based Cooling |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from 25 °C to 150 °C) |
| Cooling Rate | ≤45–80 min (depending on configuration and load) |
| Chamber Dimensions | Customizable standard configurations available |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-Series Battery Environmental Test Chamber |
| Temperature Range | -70°C to +180°C |
| Refrigeration | Cascade Compressor System |
| Explosion-Proof Certification | ATEX / IECEx Ex d IIB T4 |
| Temperature Uniformity | ±2.0°C |
| Temperature Stability | ±0.5°C (steady-state) |
| Temperature Fluctuation | ≤0.5°C |
| Heating Rate | ≥5°C/min (standard), up to 10°C/min (optional) |
| Cooling Rate | ≤45–80 min (depending on chamber size and setpoint) |
| Internal Dimensions | Customizable (Small / Medium / Large) |