Incubator Equipment
Filter
Showing 871–900 of 1395 results
| Brand | MKN |
|---|---|
| Model | SPX-250 |
| Capacity | 250 L |
| Temperature Range | 5–50 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Uniformity | ±0.5 °C |
| Power Supply | AC 220 V ±10 %, 50 Hz ±2 % |
| Rated Power | ≤500 W |
| Operating Ambient Temperature | 0–40 °C |
| Max. Relative Humidity | <85 % RH |
| Construction | Powder-coated carbon steel exterior, stainless steel interior chamber |
| Insulation | Polyurethane foam |
| Display | LED digital display (optional LCD upgrade) |
| Cooling & Heating | Dual-mode thermostatic control with compressor-based refrigeration and PTC heating |
| Air Circulation | Optimized forced-air convection system with rear-mounted fan and baffle-guided airflow |
| Safety Features | Compressor delay protection, over-temperature alarm, power failure recovery logic |
| Brand | MKN |
|---|---|
| Model | SPX-250 |
| Capacity | 250 L |
| Temperature Range | 5–50 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Uniformity | ±0.5 °C |
| Power Supply | AC 220 V ±10%, 50 Hz ±2% |
| Rated Power | ≤500 W |
| Operating Ambient Temperature | 0–40 °C |
| Relative Humidity | ≤85 % RH |
| Construction | External carbon steel with powder coating, internal stainless steel chamber |
| Insulation | Polyurethane foam |
| Display | LED digital display (optional LCD upgrade) |
| Cooling/Heating | Dual-mode thermoelectric + compressor-based system |
| Air Circulation | Optimized forced-air convection with unique airflow distribution design |
| Safety Features | Compressor delay protection, power failure recovery, over-temperature alarm |
| Brand | MKN |
|---|---|
| Model | YQX-II |
| Type | Anaerobic Chamber (Glove Box Configuration) |
| Temperature Range | Ambient +3°C to 50°C |
| Temp. Uniformity | ≤ ±1.0°C |
| Temp. Stability | ≤ ±0.3°C |
| Anaerobic Establishment Time (Transfer Chamber) | <5 min |
| Anaerobic Establishment Time (Main Chamber) | <60 min |
| Anaerobic Maintenance Duration (without gas replenishment) | >10 h |
| Chamber Dimensions (W×H×D) | 530 mm × 590 mm × 710 mm |
| Power Supply | 220 V ±10% AC, 500 VA |
| UV Sterilization | Integrated germicidal lamp |
| Catalytic Oxygen Scavenger | Built-in palladium-catalyzed deoxygenation system |
| Gas Control | Electromagnetically actuated microprocessor-regulated gas manifold with adjustable flow valves |
| Viewing Window | Thick laminated safety glass |
| Glove Ports | Dual ergonomic polymer gloves for tactile dexterity and seal integrity |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Model | CLC |
| Temperature Range (with humidification) | −20 °C to 160 °C |
| Temperature Uniformity | ±0.1 °C |
| Humidity Range | 10–95 % RH |
| Chamber Volume | 111–1212 L |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Options | 111L, 222L, 404L, 707L |
| Pricing | Upon Request |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Model Range | Friocell 22L, 55L, 111L, 222L, 404L, 707L, 1212L |
| Temperature Range | −10 °C to 99.9 °C (model-dependent |
| Friocell 22 | 5–70 °C |
| Friocell 1212 | 0–70 °C) |
| Display | 3-inch LCD (7.6 cm), digital setpoint resolution 0.1 °C |
| Chamber Material | AISI 304 stainless steel |
| Air Circulation | Top-mounted stainless-steel fan generating upward spiral airflow |
| Safety System | Independent adjustable temperature safety device (EU Class 3.1), visual & audible alarm |
| Compliance | CE, ISO 13485, compliant with ICH guidelines, USP <1031>, and Chinese Pharmacopoeia 2015 edition |
| Interfaces | RS232, USB, BMS relay contact alarm |
| Software | Warmcomm data logging & remote monitoring |
| Programmability | Up to 16-step profiles (temperature, fan speed, duration, ramp rates) |
| Accessories | Optional LED lighting modules, PT-100 probe ports, stainless-steel trays, printer interface, side access ports, IQ/OQ/PQ validation documentation |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Capacity Range | 22 L to 707 L |
| Pricing | Available Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Incucell, Incucell V |
| Pricing | Upon Request |
| Chamber Volumes | 22 L, 55 L, 111 L, 222 L, 404 L, 707 L |
| Internal Dimensions (W×D×H, cm) | 40×39×35 / 54×39×53 / 54×52×76 / 54×52×141 / 94×52×141 |
| External Dimensions (W×D×H, cm) | 62×64×88 / 76×64×106 / 76×79×130 / 101×79×191 / 141×79×191 |
| Temperature Range | +5 °C to 99.9 °C above ambient |
| Temperature Uniformity | ±0.3 °C (at 37 °C, natural convection) |
| Temperature Stability | ±0.1 °C |
| Heating Control | Microprocessor-based PID algorithm with fuzzy logic compensation |
| Chamber Material | AISI 304 stainless steel interior |
| Door | Double-glazed, low-emissivity inner glass door with ergonomic elbow-actuated opening mechanism |
| Air Filtration | Optional 0.3 µm HEPA-grade particulate filter (Incucell V only) |
| Sterilization | Dry-heat compatible up to 180 °C (validated for chamber and internal components) |
| Safety Certification | EN 61010-1 Class III.1 temperature safety cut-off |
| Communication Interface | RS232 serial port (standard), BMS relay alarm output |
| Software | Warmcomm data logging and remote monitoring suite |
| Validation Support | IQ/OQ/PQ documentation package available upon request |
| Regulatory Compliance | Designed and tested per IEC 61010-1, ISO 13485-aligned manufacturing controls, supports FDA 21 CFR Part 11-compliant audit trails when used with validated Warmcomm configuration |
| Brand | NUAIRE |
|---|---|
| Origin | USA |
| Model | NU-5800 Series |
| Temperature Range & Accuracy | Ambient to 55°C |
| Temperature Uniformity | ±0.35°C |
| Humidity Range & Accuracy | 5–90% RH |
| Capacity | 235 L (not lbs — corrected per industry standard |
| Chamber Construction | Seamless 304 stainless steel interior |
| Humidity Recovery | ≤15 min (from door opening) |
| CO₂ Control | IR sensor, 0–20% range, ±0.1% accuracy |
| Sterilization Options | Integrated dry-heat (180°C) and steam-humidity (≥90°C, 95% RH) cycles |
| Filtration | Dual-stage HEPA (99.99% @ 0.3 µm) recirculating air system |
| Compliance | FDA-listed device, ISO 13485-manufactured, CE-marked, compliant with ISO 5, USP <797>, and GLP/GMP environmental monitoring requirements |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Imported |
| Model | Nunc™ 300 cm² |
| Sterilization | Gamma-irradiated, Non-pyrogenic |
| Surface Treatment | Tissue Culture-Treated (TC-treated) |
| Total Capacity / Working Volume | 1900 mL / 400 mL |
| Cap Options | Vent Cap (透气盖), Plug Seal Cap (密闭盖), Filter Cap (0.2 µm PES membrane) |
| Packaging | 1 flask per pack, 12 packs per case |
| Stackable Design | Yes |
| Ergonomic Grip | Molded finger groove for secure handling |
| Surface Area | 300 cm² |
| Brand | OKOLAB |
|---|---|
| Origin | Italy |
| Model | H301 |
| Temperature Range | 3–60 °C |
| Temperature Uniformity | ±0.3 °C |
| Humidity Control | 85–95% RH at 25 °C |
| CO₂ Sensor | NDIR dual-wavelength, ±0.1% accuracy, 10-year lifespan |
| Temperature Accuracy | ±0.1 °C (sample-feedback mode), ±0.3 °C (chamber-feedback mode) |
| Humidity Resolution | 1% RH |
| Gas Control | Digital CO₂ or CO₂/O₂ mixing module with TTL input support and SDK for third-party integration |
| Optional Objective Heater Sleeve | Three size variants (19–24 mm, 25–32 mm, 33–42 mm) |
| Brand | OLS |
|---|---|
| Origin | Germany |
| Model | CERO |
| Temperature Control Range & Accuracy | 15–28 °C ±0.1 °C |
| Humidity Control Range | RT+7–45 °C |
| Chamber Capacity | 4 × 50 mL culture vessels |
| Dimensions | 740 × 324 × 245 mm |
| Weight | 14.5 kg |
| CO₂ Sensing | Laboratory-grade IR sensor, 0–18% range, ±0.1% accuracy |
| User Interface | 6.4″ capacitive touchscreen |
| Power Supply | 100–240 V (±10%), 50–60 Hz |
| Communication Interfaces | Ethernet, RS232, USB |
| Brand | Panasonic |
|---|---|
| Origin | Japan |
| Model | MCO-18AIC, MCO-20AIC |
| Temperature Range & Accuracy | +5 °C to 50 °C (ambient 5–35 °C) |
| Temperature Uniformity | ±0.25 °C (at 25 °C ambient, 37 °C setpoint, 5% CO₂, no load) |
| Humidity Control | Natural evaporation via stainless steel humidification tray |
| Internal Volume | 170 L / 215 L |
| Heating System | Direct Heat Air-jacket (DHA) with three independent PID-controlled heating units |
| CO₂ Sensing | Ceramic infrared (IR) sensor, ozone-free UV sterilization (4 W, 253.7 nm), Cu-alloy antibacterial inner chamber |
| Brand | Panasonic |
|---|---|
| Origin | Japan |
| Model | MCO-5AC, MCO-18AC |
| Temperature Control Range & Accuracy | +5°C to 50°C (ambient: 5°C–35°C) |
| Temperature Uniformity | ±0.25°C (at 25°C ambient, 37°C setpoint, 5% CO₂, 5% O₂, no load) |
| Humidity Control Method | Natural evaporation via stainless steel humidification pan |
| Internal Volume | 49 L (MCO-5AC), 170 L (MCO-18AC) |
| CO₂ Control | On/off control with TC sensor |
| CO₂ Range | 0–20% |
| CO₂ Stability | ±0.15% (at 25°C ambient, 37°C setpoint, 5% CO₂, no load) |
| Humidity Level | 95 ± 5% RH (at 20°C ambient, 60% RH) |
| UV Lamp | Optional 4 W ozone-free ultraviolet lamp |
| Filtration | 0.3 µm CO₂ inlet filter (99.97% efficiency) |
| Alarm Functions | High/low temperature, CO₂ deviation, door open, low water level (MCO-5AC), independent overheat protection |
| Brand | Panasonic (Sanyo) |
|---|---|
| Origin | Japan |
| Model | MCO-5M, MCO-18M |
| Temperature Range & Accuracy | +5°C to 50°C (ambient: 5–35°C) |
| Temperature Uniformity | ±0.25°C (at 25°C ambient, 37°C setpoint, 5% CO₂, 5% O₂, no load) |
| Temperature Stability | ±0.1°C |
| CO₂ Control Range | 0–20% |
| CO₂ Control Accuracy | ±0.15% |
| O₂ Control Range | 1–18%, 22–80% |
| O₂ Control Accuracy | ±0.2% |
| Humidity Method | Natural evaporation via stainless steel humidification pan |
| Relative Humidity | 95 ± 5% RH |
| Internal Volume | 49 L (MCO-5M), 170 L (MCO-18M) |
| External Dimensions (W×D×H) | 480 × 548 × 575 mm (MCO-5M), 620 × 710 × 900 mm (MCO-18M) |
| Net Weight | 50 kg (MCO-5M), 97 kg (MCO-18M) |
| Power Consumption | 205 W (MCO-5M), 330 W (MCO-18M) |
| Heating System | DHA (Direct Heating Air-jacket) with triple independent heating units (MCO-18M only) |
| Sensor Types | Thermal Conductivity (CO₂, MCO-5M), IR (CO₂, MCO-18M), Long-life electrochemical (O₂) |
| Interior Material | Antimicrobial copper-alloy stainless steel |
| UV Lamp | 4 W ozone-free (optional) |
| Filtration | 0.3 µm HEPA-grade gas filter (99.97% efficiency for CO₂/O₂ or CO₂/N₂ lines) |
| Alarm Functions | High/low temperature, CO₂/O₂ deviation, door open, UV lamp fault, independent overheat protection |
| Brand | Panasonic (formerly Sanyo) |
|---|---|
| Origin | Japan |
| Model(s) | MIR-154, MIR-254, MIR-554 |
| Temperature Range | −10 °C to +60 °C (ambient 5–35 °C, no load) |
| External Dimensions (W×D×H) | 700×580×1018 mm (MIR-154) / 700×580×1618 mm (MIR-254) / 800×832×1810 mm (MIR-554) |
| Internal Volume | 123 L / 238 L / 406 L |
| Temperature Uniformity | ±0.2 °C (PID heating mode, 50 °C setpoint) / ±1.5 °C (compressor ON-OFF mode, 5 °C setpoint) / ±0.5 °C (37 °C setpoint) |
| Power Consumption | 130 W / 190 W / 285 W (220 V, 50 Hz) |
| Refrigeration System | Hermetically sealed compressor (150 W / 250 W / 250 W output) |
| Insulation | In-situ rigid polyurethane foam (3-layer / 5-layer construction) |
| Control System | Microprocessor-based PID temperature control with key-lock digital interface, 12-step/98-cycle programmability, 10-program memory |
| Lighting | One 15 W fluorescent lamp (operational range: setpoint +5 °C to 50 °C) |
| Safety | Adjustable high/low temperature deviation alarm (±1–5 °C), thermal cut-off protection, audible/visual alert |
| Brand | Panasonic (Sanyo) |
|---|---|
| Origin | Japan |
| Model | MIR-163, MIR-263 |
| Temperature Range | Ambient +5°C to +80°C (at 20°C ambient) |
| Temperature Uniformity | ±1°C (at 20°C ambient, setpoint 37°C, no load) |
| Capacity | 93 L / 153 L |
| External Dimensions (W×D×H) | 580×595×820 mm / 730×645×870 mm |
| Internal Dimensions (W×D×H) | 450×460×450 mm / 600×510×500 mm |
| Net Weight | 50 kg / 67 kg |
| Power Consumption | 200 W / 300 W (220 V, 50 Hz) |
| Heating System | Sheathed Heater |
| Control Method | Microprocessor-based PID Control |
| Temperature Sensor | Thermistor |
| Temperature Stability | ±0.2°C (at 37°C), ±0.5°C (60–80°C) |
| Alarm | Dual visual/audible deviation alarm (±2.5°C offset), independent overheat protection |
| Timer | 00:00–99:59 h:min, auto-stop function |
| Display & Interface | LED display with touch-key keypad and key-lock function |
| Construction | Exterior – pre-painted steel |
| Brand | Panasonic |
|---|---|
| Origin | Liaoning, China |
| Model | MIR-180, MIR-280 |
| Temperature Range | Ambient +5°C to 80°C (at 20°C ambient) |
| Temperature Uniformity | ±0.5°C (at 20°C ambient, 37°C setpoint, no load) |
| Capacity | 97 L / 167 L |
| Power Supply | AC 220 V, 50 Hz |
| Internal Material | SUS304 Stainless Steel |
| Air Circulation | Natural Convection |
| Control System | Microprocessor-based PID Fuzzy Logic Controller |
| Display Resolution | 0.1°C |
| Temperature Fluctuation | ±0.2°C (5–60°C), ±0.5°C (60–80°C) |
| Timer Range | 0–5999 min with Delay Start Function |
| Weight | ~56 kg / ~72 kg |
| External Dimensions (W×D×H) | 580×600×829 mm / 700×685×906 mm |
| Internal Dimensions (W×D×H) | 450×460×470 mm / 570×540×545 mm |
| Sealing | High-temp silicone foam gasket |
| Safety Alarms | Door-open, temperature deviation, sensor fault |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PB 250 |
| Price Range | USD 2,700 – 6,800 (FOB) |
| Temperature Control Range | 0–40 °C |
| Culture Volume | 12 L |
| Vessel Inner Diameter | 200 mm |
| Vessel Height | 520 mm |
| Controller Dimensions | 220 × 80 × 70 mm |
| Controller Input Voltage/Power | 85–250 VAC / 5 W |
| Daily Medium Exchange Capacity | Up to 30% of Total Volume |
| Illumination | Integrated Adjustable LED Light Unit |
| Mixing | Magnetic Stirring System |
| Aeration | Integrated Air Pump |
| Vessel Material | Optical-Grade Transparent Polymer (UV-Stabilized, Non-Leaching) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | YIQI037 |
| Pricing | Available Upon Request |
| Brand | PHCbi |
|---|---|
| Origin | Japan |
| Instrument Type | Air-jacketed CO₂ Incubator |
| CO₂ Detection | Dual-channel Infrared (IR) Sensor |
| Temperature Control Range & Accuracy | RT +5°C to 50°C, ±0.1°C |
| Temperature Uniformity | ±0.25°C |
| CO₂ Concentration Control Range & Accuracy | 0–20% vol, ±0.15% vol |
| Humidity Control | 95% RH (±5% RH, natural evaporation via humidification pan) |
| Chamber Capacity | 170 L |
| External Dimensions (W×D×H) | 620 × 730 × 905 mm (MCO-170AICL / MCO-170AICUVHL) or 620 × 755 × 905 mm (MCO-170AICUVL) |
| Key Configurations | SafeCell UV Sterilization System, H₂O₂ Decontamination Module with Generator & Reagent, Password-protected Electronic Outer Door Lock, Independent Inner Door Kit, CO₂ Pressure Regulator, Automatic CO₂ Cylinder Switching System, Standard Gas Auto-Calibration Kit, Copper-Alloy Stainless Steel Shelving & Half-Width Dividers, Stackable Mounting Brackets, Castor Base |
| Brand | PHCbi |
|---|---|
| Origin | Japan |
| Instrument Type | Air-Jacketed CO₂ Incubator |
| CO₂ Detection | Dual Infrared (IR) Sensors |
| Temperature Control Range & Accuracy | RT+5°C to 50°C, ±0.1°C |
| Temperature Uniformity | ±0.25°C |
| CO₂ Concentration Control Range & Accuracy | 0–20%, ±0.15% |
| Humidity Control | 95% RH ±5% RH (Natural Evaporation via Humidification Pan) |
| Chamber Capacity | 230 L |
| External Dimensions (W×D×H) | 770 × 730 × 905 mm |
| Standard Configuration | SafeCell UV Sterilization System, H₂O₂ Decontamination Plate, Password-Protected Electronic Door Lock, Integrated H₂O₂ Generator & Reagent Kit, CO₂ Pressure Regulator, Automatic CO₂ Cylinder Switching System, Standard Gas Auto-Calibration Kit, Copper-Alloy Stainless Steel Shelving, Copper-Alloy Stainless Steel Half-Width Partition, Stackable Mounting Brackets, Castor-Mounted Base |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | PB250 |
| Capacity | 18 L |
| Internal Diameter | 270 mm |
| Height | 520 mm |
| Controller Dimensions | 220 × 80 × 70 mm |
| Input Voltage/Power | 85–250 VAC / 5 W |
| Illumination | Integrated LED Light Unit |
| Mixing | Magnetic Stirring System |
| Aeration | Built-in Air Pump |
| Medium Exchange Rate | Up to 30% per day (manual or controller-triggered) |
| Brand | Top Cloud-agri |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Artificial Climate Chamber |
| Pricing | Available Upon Request |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Capacity | 150 L |
| Temperature Range | 10–50 °C |
| Temperature Uniformity | ±1 °C |
| Illuminance | ≥2500 lx (optional high-intensity lighting configuration available) |
| Price | USD 1,050 (FOB Jiangsu) |
| Origin | Poland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | KK1200 |
| Price Range | USD 14,000 – 70,000 (FOB) |
| Temperature Range | −10 °C to +60 °C |
| Effective Volume | 1365 L |
| Internal Dimensions (W×D×H) | 1310 × 690 × 1510 mm |
| External Dimensions (W×D×H) | 1435 × 970 × 2010 mm |
| Temp. Uniformity | ±2.5 °C |
| Temp. Stability | ±0.1 °C |
| Temp. Reproducibility | ±0.5 °C |
| Humidity Range | 30–90% RH |
| Lighting System | 8 × 400 W metal halide lamps |
| Photosynthetic Photon Flux Density (PPFD) | 650 µmol·m⁻²·s⁻¹ at 900 mm from shelf |
| Power Supply | 240 V / 50 Hz / 35 A, grounded |
| Net Weight | 220 kg |
| Gross Weight | 400 kg |
| Origin | Poland |
|---|---|
| Model | ST2 |
| Temperature Range | +3°C to +70°C |
| Temperature Uniformity | ±0.55°C |
| Temperature Stability | ±0.2°C |
| Humidity Range | 20–65% RH |
| Capacity | 150 L |
| Internal Dimensions (W×D×H) | 520 × 420 × 660 mm |
| External Dimensions (W×D×H) | 600 × 600 × 850 mm |
| Shelving | 3 adjustable stainless-steel shelves |
| Power Consumption | 170 W |
| Net Weight | 48 kg |
| Gross Weight | 65 kg |
| Interface | RS232C |
| Programmability | 6-step, 999-cycle timer with memory retention after power loss |
| Compliance | Designed for GLP-compliant labs |
| Brand | PRIMA (UK) |
|---|---|
| Origin | Shanghai, China |
| Model | IN150 / IN250 |
| Temperature Range | 4–60 °C |
| Chamber Capacity | 150 L / 250 L |
| Internal Dimensions (W×H×D) | 550×610×450 mm / 550×1010×450 mm |
| External Dimensions (W×H×D) | 650×1050×605 mm / 650×1450×605 mm |
| Max. Shelf Load | 18 kg per shelf |
| Shelf Configuration | 5 shelves (standard 2) / 7 shelves (standard 3) |
| Temperature Display Resolution | 0.1 °C |
| Temperature Stability | ±0.25 °C |
| Temperature Uniformity | <±0.8 °C at 20 °C |
| Heating Power | 450 W |
| Cooling Power | 250 W / 300 W |
| Safety Features | Digital temperature calibration, sensor open/short circuit alarm, over-temperature & low-temperature alarm, leakage protection, auto-restart after power failure |
| Optional Accessories | RS232/RS485 interface, test port, internal power socket, LED interior lighting, temperature monitoring software |
| Brand | PRIMA |
|---|---|
| Model | UP65 / UP130 / UP230 / UP400 / UP700 |
| Temperature Range | +5 °C to 80 °C |
| Chamber Volume | 65–700 L |
| Uniformity | ±1% of setpoint |
| Stability | ±0.1 °C |
| Display Resolution | 0.1 °C |
| Heating Power | 1000–2500 W |
| Safety Features | Triple over-temperature protection, door-open alarm, sensor fault detection, leakage current protection, auto-recovery after power failure |
| Optional | RS232/RS485 interface, temperature programming, data logging software, test port, fresh air inlet & exhaust ducts |
| Brand | PSI / Photon Systems Instruments |
|---|---|
| Origin | Czech Republic |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | FMT150 |
| Temperature Range | 10–60 °C |
| Temperature Uniformity | ±0.5 °C |
| Humidity Range | 20–95 % RH |
| Culture Volume | 5 L |