Industry-specific Instruments
Filter
Showing 1381–1410 of 2171 results
| Brand | Pharma Test |
|---|---|
| Origin | Germany |
| Model | PT-DDS4 |
| Degassing Residual Oxygen | <5 ppm |
| Preheating Temperature | 37 °C ± 0.1 °C |
| Delivery Method | Pressurized (direct connection to deionized water supply) or Vacuum-assisted (from external reservoir) |
| Compliance | Designed in alignment with USP <711>, FDA Guidance for Industry on Dissolution Testing, and ICH Q5C stability requirements |
| Cleaning | Fully drainable, CIP-compatible design |
| Brand | Pharma Test |
|---|---|
| Origin | Germany |
| Model | SPT-6 |
| Compatibility | PTZ AUTO, PTZ AUTO EZ, PTZ-S tablet disintegration testers |
| Operation Mode | Immersion-based thermal penetration measurement |
| Sample Capacity | 6 positions |
| Bath Integration | Standalone Plexiglas water bath or integrated into PTZ platforms |
| Automation | Auto-detection and reporting of softening time when used with PTZ AUTO EZ series |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | ASP2000 |
| Instrument Type | Offline Dissolution System with Online Detection Capability |
| Sampling Capacity | 50 positions |
| Online Dilution Ratio | up to 1:100 |
| Compatible Detection Methods | UV-Vis Spectrophotometry and HPLC |
| Control Software | WinDiss32 |
| Integration | Designed for seamless coupling with all Pharma-test dissolution testers (e.g., PT-DT series) |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | ADS |
| Instrument Type | Offline Dissolution Tester |
| Dissolution Vessels | 6, 8, or 7 (configurable) |
| Temperature Range | 10–50 °C |
| Temperature Accuracy | ±0.1 °C |
| Rotation Speed Range | 15–150 rpm |
| Paddle Wobble Amplitude | ≤1 mm |
| Basket Wobble Amplitude | ≤1 mm |
| Water Bath Temperature Control Range | Ambient to 45 °C |
| Water Bath Temperature Resolution | 0.1 °C |
| Water Bath Volume | 12 L |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | DFC1220SP |
| Instrument Type | Offline Dissolution Tester |
| Configuration | Includes PTWS 1220 dissolution bath, PTFC-16 fraction collector, two PT-SP8 syringe pumps (or optional Ismatec peristaltic / CAT piston pumps), EPE-1220 automated sampling system or in-situ probe, ITM-1220 inline temperature monitoring (optional), TM-1220/TMA-1220 tablet drop alignment module (optional), PT-RP80 thermal printer (optional) |
| Compliance | USP <711>, USP <724>, Ph. Eur. 2.9.3 & 2.9.4 |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PT-DT Series |
| Instrument Type | Offline Dissolution Tester |
| Sample Positions | 8 |
| Dissolution Vessel Options | 250 mL, 1 L, 2 L, 4 L |
| Temperature Range | 25–45 °C |
| Temperature Accuracy | ±0.2 °C |
| Rotational Speed Range | 25–250 rpm |
| Speed Accuracy | ±1 rpm |
| Water Bath Volume | 35 L |
| Construction | Stainless Steel (GLP-compliant) |
| Modular Architecture | Supports upgrade to semi-automated (offline) and fully automated (online) configurations |
| Validation Support | IQ/OQ/PQ documentation and execution available |
| Regulatory Compliance | Designed to meet USP <711>, EP 2.9.3, JP XVII, and ChP (Chinese Pharmacopoeia) General Chapter 0931 requirements |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTB 211E |
| Measurement Principle | Constant-Speed and Constant-Force Methods |
| Force Range | 2–330 N |
| Resolution | 1 N |
| Optional Units | N, kp, Sc |
| Interface | RS-232, Parallel Printer Port |
| Compliance Option | 21 CFR Part 11–compliant Software Available |
| Sample Capacity | 1–30 mL Ampoules |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTB 311E |
| Hardness Range | 2–330 ±1 N |
| Thickness Range | 2–15 mm |
| Diameter/Length Range | 2–40 mm |
| Measurement Modes | Constant-Force & Constant-Speed |
| Force Units | N, kp, Sc |
| Dimension Units | mm, inch |
| Compliance | FDA 21 CFR Part 11 (via PTB32 software), GMP/GLP-ready |
| Interface | RS-232, Printer Port |
| Construction | Full Stainless Steel Housing |
| Brand | Pharma-Test |
|---|---|
| Origin | Germany |
| Model | PTB 330 |
| Compliance | USP <1217>, Ph. Eur. 2.9.8 |
| Test Modes | Linear Force Ramp & Linear Speed Ramp |
| Output Parameters | Hardness (N), Thickness (mm), Width (mm), Diameter/Length (mm), Mass (g, via external analytical balance) |
| User Authentication | Integrated Fingerprint Sensor |
| Data Management | Onboard Statistics (Mean, SD, RSD, Min/Max), Force-Profile Printing, Multi-Point Validation Protocol |
| Interface | Graphical Touchscreen GUI with Contextual Guidance |
| Connectivity | Optional Ethernet/Wi-Fi Network Integration |
| Mechanical Design | Dual-axis motorized actuator with calibrated load cell and precision linear encoder |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTB 500 |
| Compliance | USP <1217>, EP <2.9.8> |
| Test Modes | Dual-force (linear speed increase & linear force increase) |
| Measured Parameters | Hardness, Thickness, Width, Diameter/Length, Weight (via external analytical balance) |
| Integrated Components | Sample carousel, GUI-controlled actuation, statistical engine, network interface |
| Validation | Built-in multi-point validation protocol |
| Output | Force–displacement curve, full statistical summary (mean, SD, RSD, min/max), configurable print/export |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTF 10E / PTF 20E |
| Drum Configuration | Single-drum (PTF 10E) or Dual-drum (PTF 20E) |
| Rotation Speed | Fixed at 25 rpm (standard), adjustable 1–9999 rpm (ER variants) |
| Test Duration Range | 1–9999 seconds |
| Rotation Count Range | 1–9999 revolutions |
| Drum Material | Acrylic glass (PMMA), optional anti-static coating |
| Drum Angle | Standard 0° |
| Compliance | USP <1216>, Ph. Eur. <2.9.7>, JP <6.07> |
| Construction | Full stainless-steel housing (AISI 304) |
| Documentation | Factory-supplied IQ/OQ protocols included |
| Interfaces | RS232 serial port, parallel printer interface |
| GMP/GLP Conformance | Designed and validated for regulated pharmaceutical QC environments |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTF 200 |
| Drum Configuration | Dual-drum |
| Speed Range | 15–100 rpm |
| Operating Modes | Fixed revolutions or fixed time |
| Calibration Reminder | Programmable interval timer |
| Data Export | USB flash drive support |
| Sample Discharge | Automatic |
| Balance Interface | RS-232/USB for analytical balance integration |
| Compliance | USP <1216>, Ph. Eur. <2.9.7>, JP <14> |
| Optional | Built-in thermal printer |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTF 110 / PTF 210 / PTF 310 / PTF 610 |
| Drum Configuration | 1 / 2 / 3 / 6 drums |
| Construction | Brushed stainless steel housing |
| Drum interchangeability | Fully compatible across PTF 100–600 and PTF 110–610 generations |
| Compliance | Designed to meet USP <1216>, EP 2.9.7, and JP 6.05 requirements |
| Connectivity | PT-Node network adapter optional |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTS 3E |
| Sample Capacity | 3 units simultaneously |
| Temperature Range | 30–40 °C |
| Temperature Accuracy | ±0.5 °C (typical for pharmacopeial disintegration systems) |
| Water Bath Volume per Station | 1.2 L |
| Test Duration Range | 1 min – 10 h |
| Flip Cycle Interval | 1–10 min (programmable 180° rotation) |
| Acoustic Emission | <35 dB(A) (fully silent operation) |
| Heating System | PTC ceramic with overheat protection |
| Grease-Resistant Sealing | Integrated hydrophobic barrier at sample holder interface |
| Compliance | Designed to meet USP <701>, Ph. Eur. 2.9.1, and JP 6.05 disintegration requirements |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTWS 1420 |
| Instrument Type | Offline Dissolution Tester |
| Number of Vessels | 14 |
| Temperature Range | 25–45 °C |
| Temperature Accuracy | ±0.2 °C |
| Rotational Speed Range | 25–250 rpm |
| Paddle Wobble | ≤0.2 mm |
| Basket Wobble | ≤0.2 mm |
| Water Bath Temperature Resolution | ±0.2 °C |
| Water Bath Volume | 0.5 m³ |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTWS 820D |
| Instrument Type | Online Dissolution Tester |
| Compliance | USP <711>, USP <724>, EP 2.9.3/2.9.4, ChP (Chinese Pharmacopoeia), JP |
| Vessel Options | 250 mL, 1 L, 2 L, 4 L |
| Construction | Stainless Steel (GLP-compliant) |
| Automation Level | Fully Automated Online System with Integrated Sampling |
| Sampling Mechanism | EPE Robotic Arm with Precise Z-axis Positioning |
| Stirring Stations | 8 Independent Vessels |
| Method Storage | Unlimited Methods via USB |
| Validation Support | IQ/OQ/PQ Documentation & Services Available |
| Temperature Uniformity | Optimized Water Bath with Diffuser & Low-Noise Circulation Pump |
| Connectivity | USB (Remote Control & Data Export), RS232 (Printer Interface) |
| User Management | Password-Protected Role-Based Access |
| System Diagnostics | Pre-run Self-Check Routine |
| Alert System | Visual (LED) and Audible Status Indication |
| Cleaning | Removable Bath Assembly & Dedicated System Rinse Kit |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTWS 820D |
| Instrument Type | Offline Dissolution Tester |
| Compliance | USP <711>, USP <724>, Ph. Eur. 2.9.3 & 2.9.4, DAB, JP <15>, ChP |
| Sample Positions | 8 (4+4 arrangement) |
| Drive Mechanism | Single motor-driven vertical lift |
| Temperature Monitoring | Real-time auto-check at each sampling point |
| Data Storage | SD card (method storage capacity: >10,000 protocols) |
| User Access Control | Role-based authentication (admin/operator) |
| Status Indication | Tri-color LED traffic-light display (green = ready, yellow = warming/stabilizing, red = error/failure) |
| Calibration Support | Built-in OQ/PQ reminder prompts |
| Cup Sealing | Low-volatility precision-fit lid |
| Bath Accessibility | Tool-free water bath removal for cleaning |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTZ AUTO EZ |
| Basket Positions | 1–4 |
| Stroke Distance | 55 ± 1 mm |
| Disintegration Time Range | 1 s – 59 h 59 min 59 s |
| Temperature Control Range | 25–45 °C |
| Frequency | 30 ± 1 cycles/min |
| Compliance | USP <701>, EP 2.9.1, JP 17 |
| Software Interface | RS-232, USB (optional), Printer Port |
| Safety Features | Dual overtemperature protection |
| Construction | Full stainless steel (AISI 316L contact surfaces) |
| Regulatory Support | 21 CFR Part 11-compliant PTZ32 software with audit trail, electronic signatures, and user access control |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTZ AUTO |
| Basket Stations | 1–4 |
| Stroke Distance | 55 mm |
| Cycle Frequency | 30 cycles/min |
| Temperature Range | 30–45 °C |
| Disintegration Time Range | 1 s – 59 h 59 min 59 s |
| Method Storage Capacity | 16 methods |
| Construction | Full stainless steel |
| Compliance | USP <701>, USP <2040>, Ph. Eur. 2.9.1, Ph. Eur. 2.9.1.2 |
| Safety Features | Dual overtemperature protection, mobile external temperature probe, OQ/PQ status monitoring |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | WHT 4ME |
| Compliance | EP <2.9.8>, USP <1217> |
| Testing Parameters | Hardness (constant-speed or constant-force mode), Weight, Thickness/Height, Diameter/Length |
| Sample Capacity | 20-position auto-feeder, up to 250 tablets per run |
| Throughput Modes | Single-batch or multi-batch (up to 10 distinct tablet types/batches) |
| Software | WHT 32 compliant with FDA 21 CFR Part 11 (audit trail, electronic signatures, configurable data storage paths) |
| User Interface | Integrated high-resolution touchscreen PC |
| Sample Handling | Tool-free adaptation for round, oblong, rectangular, and irregularly shaped tablets |
| Mechanical Design | Patented tapping mechanism ensures precise tablet centering prior to hardness and diameter measurement |
| Regulatory Alignment | Designed for GLP/GMP environments |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Model | Pharmag AC-3000 |
| Throughput | 3000 capsules/hour |
| Capsule Sizes | #00, #0, #1, #2, #3, #4 |
| Power Supply | 230 V AC, 50/60 Hz, Single-phase |
| Motor | 90 W, 1400 rpm, 230 V AC, Three-phase (Gearbox Reduction Ratio: 30:1) |
| Rated Power | 0.75 kW (including vacuum pump) |
| Vacuum Pump Capacity | 6 m³/h |
| Vacuum Suction Pump Capacity | 9 m³/h |
| Air Compressor | 50 L/min at 1.5 bar |
| Contact Materials | AISI 316 stainless steel |
| Control System | PLC-based automation |
| Compliance | GMP-compliant design, CE-certified |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Model | Minipress 2 |
| Type | Benchtop GMP-Compliant Rotary Tablet Press |
| Max. Stations | 12 (configurable as 4×D, 4×B, 4×BB) |
| Max. Compression Force | 60 kN (6 ton) |
| Pre-compression Force | 20 kN (2 ton) |
| Max. Tablet Diameter | 23 mm |
| Max. Fill Depth | 20 mm |
| Max. Output | 27,600 tablets/hr |
| Drive System | AC Variable Frequency Motor |
| Feeding Options | Gravity or Forced Feeders |
| Tooling Compatibility | B, D, BB standard |
| Contact Materials | AISI 316 stainless steel |
| Safety | Interlocked guarding, emergency stop, mechanical overload protection |
| Regulatory Compliance | Designed per EU GMP Annex 1 & ISO 9001 |
| Optional Upgrades | Real-time compression force monitoring, vibration-damping feet, 316L turntable, automated tablet weight control integration |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | Imported |
| Model | UGD |
| Pricing | Upon Request |
| Brand | Hanson |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | PHOENIX RDS m2 |
| Pricing | Upon Request |
| Brand | Pilodist |
|---|---|
| Origin | Germany |
| Model | BOCLE D5001 |
| Standard Compliance | ASTM D5001 |
| Test Duration | 30 min |
| Load | Fixed Ball Load (Standardized per ASTM D5001) |
| Sample Volume | 50 mL |
| Temperature Control | Precision Thermostatic Bath |
| Humidity & Airflow Control | Integrated Environmental Regulation System |
| Measurement Method | Optical Microscopy of Wear Scar Dimensions (Major & Minor Axes) |
| Brand | Pilodist |
|---|---|
| Origin | Germany |
| Model | PD 100CC |
| Compliance | ASTM D2892, ASTM D5236 |
| Control System | Windows-based PC software with real-time process visualization |
| Vacuum Control | Auto-adjusted residual pressure (100, 50, 10, 2 Torr) with manual override |
| Safety Features | Overtemperature shutdown, nitrogen purge activation, audible/visual alarms |
| Fraction Collection | 20-position airtight fraction collector with automated cooling, weighing, logging, and cleaning |
| Interface | Ground-glass joints with elastomeric seals — grease-free vacuum integrity |
| Distillation Modes | Integrated atmospheric-to-vacuum transition with automatic gap cooling |
| Data Output | Excel-native reporting, TBP curve generation, AET temperature conversion |
| Brand | Pilodist |
|---|---|
| Origin | Germany |
| Model | PD 104 / PD 107 |
| Construction | Full Borosilicate Glass (Duran®-grade) |
| Distillation Mode | Batch, Vacuum-to-Atmospheric |
| Theoretical Plates | Up to 90 |
| Minimum Sample Volume | 1 mL |
| Column Type | Concentric-Tube Precision Fractionating Column |
| Vessel Options | 0.05–20 L (Glass or SS) |
| Heating Options | Oil Bath or Electric Heating Mantle |
| Compliance | ASTM D2892, D5236, ISO 9198, IP 123 |
| Brand | Pilodist |
|---|---|
| Origin | Germany |
| Model | PD 105 |
| Application Domain | Petroleum & Petrochemical R&D, Fine Chemical Synthesis, High-Purity Separation |
| Operating Pressure Range | Atmospheric to Vacuum (≤ 0.1 mbar) |
| Temperature Control Method | Programmable Oil Bath with PID Regulation |
| Reflux Ratio Control | Adjustable via Motorized Reflux Divider |
| Fraction Collection Modes | Temperature-Triggered, Volume-Triggered, or Time-Triggered |
| Receiver Options | 6-, 9-, or 18-position Automated Fraction Collector with Overflow Protection |
| Software Platform | Windows-Based Control Suite with Real-Time Parameter Logging and Curve Visualization |
| Compliance Framework | Designed to Support ASTM D2892 (True Boiling Point Distillation), ASTM D5236 (Extended True Boiling Point), and ISO 3405 |
| Brand | Pilodist |
|---|---|
| Origin | Germany |
| Model | PD 200CC |
| Standard Compliance | ASTM D5236 |
| Control System | Windows-based PC-controlled automation |
| Collection Capacity | 12 fraction receivers with IR heating and level tracking |
| Safety Features | Overtemperature shutdown, nitrogen purge activation, user-definable alarm thresholds |
| Distillation Mode | Vacuum batch distillation with automatic AET conversion and cut-point assignment |
| Material Construction | High-purity borosilicate glass (DIN/ISO 3585), ground-glass joints with elastomeric seals (no vacuum grease required) |
| Thermal Management | Adaptive heating power modulation and dynamic coolant temperature control |
| Data Output | Native Excel export (.xlsx), real-time curve visualization (volume % vs. AET °C), GLP-compliant audit trail |
| Brand | Pilodist |
|---|---|
| Origin | Germany |
| Model | PD 400CC |
| Standards Compliance | ASTM D2892 & ASTM D5236 |
| Distillation Capacity | 6 L (standard), optional 2–20 L |
| Max Operating Temperature | 420 °C (AET) |
| Pressure Range | 1–760 mmHg |
| Control System | Windows-based PC automation with real-time monitoring and safety interlocks |
| Safety Features | Overtemperature shutdown, vacuum overpressure protection, power-fail emergency cooling, level/leak detection, automatic condenser and pot cooldown |