Industry-specific Instruments
Filter
Showing 1291–1320 of 6301 results
| Brand | Fangyuan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | Y331 Series |
| Measurement Length | 0–500 mm (adjustable) |
| Twist Range | 1–9999.9 turns/10 cm or turns/m |
| Untwist Elongation Range | ≤60 mm (scale-indicated) |
| Max Twist Contraction | 20 mm |
| Clamp Rotational Speed | 100–2000 rpm (adjustable) |
| Pre-tension Range | 0.5–171.5 cN |
| Power Supply | AC 220 V, 50 Hz, 200 W |
| Dimensions | 900 × 250 × 300 mm |
| Weight | 30 kg |
| Compliance | GB/T 2543.1–2001, GB/T 2543.2–2001, FZ/T 10001–1992 |
| Software-Enabled Test Modes | Direct Counting Method, Untwist-Twist Method A, Untwist-Twist Method B, Triple Untwist-Twist Method |
| Key | Brand: Fangyuan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | YG026M |
| Force Range | 500 cN – 50,000 N (selectable) |
| Load Resolution | 1/50,000 of full scale |
| Force Accuracy | Class 0.5 (±0.5% of reading within 2–120% of sensor range |
| Maximum Travel | 900 mm |
| Elongation Resolution | 0.01 mm |
| Effective Width | 420 mm |
| Data Sampling Rate | ≥800 Hz (up to 1000 Hz dynamic) |
| Storage Capacity | ≥4,000 test records (onboard) |
| Test Speed | 0.1–1000 mm/min |
| Dimensions (L×W×H) | 450×750×1550 mm |
| Weight | 200 kg |
| Brand | Fangyuan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | YG026PC |
| Force Range | 500 cN to 50,000 N (selectable) |
| Load Resolution | 1/50,000 of full scale |
| Force Accuracy | Class 0.5 (±0.5% of reading at 2–120% of sensor range |
| Maximum Travel | 1100 mm |
| Elongation Resolution | 0.01 mm |
| Effective Width | 420 mm |
| Data Sampling Rate | ≥800 Hz |
| Onboard Storage Capacity | ≥4,000 test records |
| Test Speed | 0.1–1000 mm/min |
| Dimensions (L×W×H) | 850×500×1800 mm |
| Weight | 280 kg |
| Brand | Fangyuan |
|---|---|
| Model | YG032D |
| Sample Clamp Inner Diameter | φ30.5 ± 0.05 mm |
| Diaphragm Outer Diameter | φ80 × 0.9 ± 1 mm |
| Burst Strength Range | 0–6 MPa |
| Burst Strength Resolution | 0.002 MPa |
| Burst Strength Accuracy | ≤ ±1% |
| Expansion Distance Range | 0.1–35 mm |
| Expansion Distance Accuracy | ±0.1 mm |
| Burst Time Range | 0.1–99.9 s |
| Hydraulic Pressure Rate | 10–150 mL/min |
| Hydraulic Fluid | 85% glycerol (glycerin) |
| Power Supply | AC 220 V, 50 Hz, 500 W |
| Dimensions (L×W×H) | 525 × 280 × 590 mm |
| Weight | ~50 kg |
| Brand | Fangyuan |
|---|---|
| Model | YG033A |
| Tear Force Range | 16 N, 32 N, 64 N |
| Force Accuracy | ≤ ±1 division |
| Notch Length | 20 ± 0.2 mm |
| Tear Distance | 43 mm |
| Specimen Size | 100 mm × 63 mm (L × W) |
| Dimensions | 400 mm × 210 mm × 390 mm (L × W × H) |
| Weight | 27 kg |
| Compliant Standards | GB/T 3917.1, FZ/T 6006, FZ/T 75001, ASTM D1424, ASTM D5734 |
| Brand | Fangyuan |
|---|---|
| Model | YG141D |
| Measurement Range | 0.1–30 mm |
| Resolution | 0.01 mm |
| Foot Area Options | 100 mm², 2000 mm² |
| Foot Diameter Options | Ø11.28 mm, Ø50.46 mm |
| Applied Pressures | 50 cN, 100 cN, 200 cN |
| Dwell Time Options | 10 s, 30 s |
| Foot Descent Speed | 1.72 mm/s |
| Power Supply | AC 220 V, 50 Hz, 40 W |
| Dimensions (L×W×H) | 410 × 160 × 300 mm |
| Weight | ~25 kg |
| Compliant Standards | GB/T 3820–1997, ISO 5084, ISO 9073-2, ISO 9863, FZ/T 01003 |
| Brand | Fangyuan Instruments |
|---|---|
| Model | YG401D |
| Workstations | 6 |
| Pre-set Count Range | 0–99999 cycles |
| Cumulative Count Range | 0–99999 cycles |
| Clamp Mass | 200 ± 1 g |
| Fabric Specimen Weight (Clothing) | 395 ± 2 g |
| Fabric Specimen Weight (Upholstery) | 594 ± 2 g |
| Abrading Block Effective Friction Diameter | Φ28.8 mm / Φ90.3 mm |
| Clamp-to-Table Relative Rotational Speed | 50 ± 2 rpm |
| Loading Hammer Mass | 2385 ± 10 g |
| Dimensions (L×W×H) | 820 × 505 × 410 mm |
| Net Weight | 150 kg |
| Power Supply | AC 220 V, 50 Hz, 300 W |
| Motion Pattern | Lissajous orbits (Ø40 mm and Ø60 mm) |
| Compliance | GB/T 4802.2, GB/T 13775, GB/T 21196, FZ/T 20020, ISO 12945-1/2/3, ISO 12947-1/2/3/4, ASTM D4966, ASTM D4970, JIS L1096, TM196 |
| Brand | Fangyuan |
|---|---|
| Model | YG461D |
| Measurement Principle | Constant-pressure air flow through fabric under standardized differential pressure |
| Pressure Range | 50–4000 Pa |
| Measurable Air Permeability | 1–9999 mm/s |
| Accuracy | ≤ ±2% |
| Sample Thickness Limit | ≤ 8 mm |
| Standardized Test Areas | 5, 20, 50, 100 cm² and Ø50 mm (≈19.6 cm²), Ø70 mm (≈38.5 cm²) |
| Nozzle Set | 11 calibrated stainless-steel nozzles |
| Power Supply | AC 220 V, 50 Hz, 1200 W |
| Dimensions | 820 × 600 × 1300 mm (L×W×H) |
| Weight | 65 kg |
| Compliance | GB/T 5453–1997, ISO 9237, ASTM D737, JIS L1096, DIN 53387, BS 5636, NF G07-111 |
| Brand | Fangyuan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YG502 |
| Pricing | Available Upon Request |
| Motion Trajectory | Φ40 mm circular path |
| Brush Height Adjustment Range | 2–12 mm (continuously adjustable) |
| Sample Area | 100 cm² |
| Pre-set Counter Range | 1–9999 cycles (digital input) |
| Oscillation Frequency | 60 cycles/min |
| Test Load | Synthetic fabrics: 590 cN (achieved via 100 cN + 490 cN weights) |
| Worsted wool fabrics | 780 cN (100 cN + 290 cN + 490 cN) |
| Woolen fabrics | 490 cN (single 490 cN weight) |
| Standard Weights Included | 100 cN ×1, 290 cN ×1 (sample holder self-weight: 490 cN) |
| Standard Abrasive | 2201 Standard Gabardine (2 pieces) |
| Foam Pads | 4 pcs |
| Power Supply | 1 HP, AC 220 V, 50 Hz, 100 W |
| Dimensions (L×W×H) | 540 × 250 × 345 mm |
| Net Weight | 30 kg |
| Brand | Fangyuan |
|---|---|
| Origin | Zhejiang, China |
| Model | YG605 |
| Heating Plate Dimensions | 45 × 110 mm (6 in × 6 in) |
| Test Pressure | 4 ± 1 kPa |
| Temperature Range | Ambient to 250 °C (±2 °C accuracy per platen) |
| Time Range | 0–999 s (±1 s accuracy) |
| Heating Modes | Single-sided (ironing), Dual-sided (sublimation) |
| Power Supply | AC 220 V, 50 Hz, 450 W |
| Net Weight | 20 kg |
| Controller | 16-bit industrial-grade microprocessor with PID temperature regulation |
| Sensor Type | Imported surface-mount temperature sensor |
| Compliance Standards | GB/T 5718, GB/T 6152, ISO 105-P01, ISO 105-X11, AATCC 114, AATCC 117, AATCC 133, JIS L 0850, JIS L 0879 |
| Brand | Fangyuan |
|---|---|
| Origin | Zhejiang, China |
| Model | YG611M/S |
| Light Source | 3000W Air-Cooled Xenon Arc Lamp |
| Lamp Life | 1500 h |
| Sample Capacity | 10 specimens (dual-side loading) |
| Exposure Area per Specimen | 100 × 45 mm |
| Turntable Speed | 5 rpm |
| Turntable Radius | 175 mm |
| Temperature Range (Chamber) | 25–85 °C ±2 °C |
| Black Panel Temperature (BPT) | 30–100 °C ±2 °C |
| Black Standard Temperature (BST) | 30–110 °C ±1 °C |
| Humidity Range | 15–85 %RH ±5 %RH |
| Irradiance Control | 25–55 W/m² (300–400 nm, GB/T) |
| Cooling Compressor Power | 1000 W |
| Refrigeration Capacity | 2400 kcal/h |
| Water Tank Capacity | 5000 mL |
| Dimensions (L×W×H) | 900 × 620 × 1900 mm |
| Weight | ~230 kg |
| Power Supply | 220 V, 50 Hz, 20 A, 4500 W |
| Brand | Fangyuan |
|---|---|
| Model | YG631 |
| Applied Standards | AATCC 15, GB/T 3922–1995, GB/T 5713–1997, GB/T 5714–1997 |
| Load Force | 50 N / 10 lbf |
| Resin Plate Dimensions | 60 × 115 mm |
| Resin Plate Quantity | 21 pcs |
| Y902 Conditioning Oven Temperature Range | Ambient to 90 °C ±2 °C |
| Timer Range | 0–99 h |
| Chamber Dimensions (L×W×H) | 308 × 330 × 300 mm |
| Brand | Fangyuan |
|---|---|
| Model | YG815A |
| Origin | Zhejiang, China |
| Compliance | GB/T 5455–1997, CPAI-84 (custom configuration) |
| Afterflame Timer Range | 0–999.9 s (0.1 s resolution) |
| Smolder Timer Range | 0–999.9 s (0.1 s resolution) |
| Ignition Time | 12 s (adjustable) |
| Flame Duration Stability | 30 s (adjustable) |
| Flame Height | 40 ± 2 mm |
| Igniter Tip Internal Diameter | 11 mm |
| Distance from Igniter Tip to Specimen | 17 mm at 25° tilt |
| Specimen Holder Dimensions | Outer 400 × 80 mm, Inner Aperture 360 × 50 mm |
| Chamber Dimensions | 329 × 329 × 767 mm (L×W×H) |
| Overall Dimensions | 350 × 450 × 885 mm (L×W×H) |
| Control Box | 230 × 190 × 110 mm (L×W×H) |
| Power Supply | AC 220 V, 50 Hz |
| Brand | Fangyuan |
|---|---|
| Model | YG815B |
| Test Method | Horizontal Flame Spread |
| Chamber Temperature Range | 0–99 °C (1 °C resolution) |
| Ignition Time | 15 s |
| Burner Orifice Diameter | 9.5 mm (standard) |
| Distance from Burner Tip to Specimen Surface | 19 mm |
| Specimen Holder Dimensions | 360 × 100 × 9 mm (L × W × H) |
| Test Chamber Internal Dimensions | 350 × 400 × 750 mm (L × W × H) |
| Overall Dimensions | 410 × 480 × 800 mm (L × W × H) |
| Control Box Dimensions | 250 × 200 × 100 mm (L × W × H) |
| Power Supply | AC 220 V, 50 Hz |
| Compliance Standard | FZ/T 01028–1993 |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Model | 150×130 FF |
| Roller Diameter | 150 mm |
| Roller Length | 330 mm |
| High-Speed Roller Max Speed | 27.4 rpm (GX-2003) / 33.6 rpm (GX-2603) |
| Low-Speed Roller Max Speed | 20 rpm |
| Fixed Friction Ratio | 1:1.4 (GX-2003) / 1.125:1 (BR1600) |
| Motor Power | 5.5 kW × 2 (GX-2603), 22 kW (BR1600) |
| Mixing Chamber Volume | 1.57 L |
| Fill Factor Range | 0.68–0.90 |
| Rotor Speed Range | 25–240 rpm (±1 rpm) |
| Max Operating Temperature | 120 °C |
| Roller Surface Hardness | 60–65 HRC |
| Thermal Control | Drilled Rollers with Rotating Joints |
| Bearing Type | Double-Row Roller Bearings |
| Gap Adjustment | Manual, 0.1 mm Resolution with Overload Protection |
| Drive System | AC Inverter-Controlled Motors with Safety Brake (GX series) |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Model | 9UM |
| Type | Continuous Twin-Screw Mixer for Rubber & Thermoplastic Compounding |
| Feed Capacity | 400–40,000 kg/h |
| Rotor Configuration | Co-rotating, Intermeshing Twin-Screw |
| L/D Ratio (LCM variants) | 10:1 |
| Control System | PLC with HMI Touchscreen Interface |
| Modular Design | Yes |
| Compliance | Designed for ASTM D3765, ISO 252, and ISO 1133-compliant compound development workflows |
| Integration Ready | Compatible with Farrel FMP™ Melt Pumps and Underwater Pelletizing Systems |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Model | 9UM |
| Type | Continuous Twin-Screw Mixer for Rubber & Thermoplastic Compounding |
| Production Capacity | 400–40,000 kg/h |
| Rotor Configuration | Intermeshing Co-Rotating Twin Screw |
| Drive System | Variable-Frequency Motor with Precise Speed Control (0–600 rpm) |
| Barrel Temperature Control | Zone-wise Electric Heating + Water Cooling (±1°C stability) |
| PLC Interface | Touchscreen HMI with Data Logging, Recipe Management, and Audit Trail Capability |
| Compliance | Designed to Support GLP/GMP Environments per ASTM D3418, ISO 1133, and USP <1043> for Polymer Processing Validation |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Model | BR1600 |
| Chamber Net Volume | 160 L |
| Fill Factor | 75% (at 1.0 g/cm³ density: ~120 kg batch) |
| Rotor Type | Tangential ST™/NST™ Four-Wing Design |
| Temperature Control | Closed-Loop Water-Cooled Chamber & Rotors |
| Optional Features | Hydraulic Ram Loader, Hardened Wear-Resistant Surfaces, Customized Rotor Geometry |
| Compliance | Designed to meet ASTM D3418, ISO 6502, and rubber compounding process validation requirements for R&D and pilot-scale GLP environments |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Model | BR1600-GLT |
| Type | Batch Internal Mixer |
| Chamber Net Volume | 160 L |
| Standard Fill Capacity (75% @ 1.0 g/cm³) | 120 kg |
| Rotor Type | Tangential ST™/NST™ or Interlocking NR-Series |
| Cooling System | Closed-Loop Water Circulation |
| Drive Configuration | Variable-Speed AC Motor |
| Control Interface | PLC-Based HMI with Recipe Management |
| Compliance | Designed to Support ASTM D3418, ISO 6601, and GLP/GMP-Ready Data Logging |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Model | CPeX™ |
| Nominal Production Rate | 10–30 kg/hr |
| Mixer Power | 7.5 kW (10 hp) |
| Max. Rotor Speed | 1000 rpm |
| Rotor Diameter | 35 mm (1.38 in) |
| Hot Feed Extruder Power | 7.5 kW (10 hp) |
| Max. Screw Speed | 100 rpm |
| Screw Diameter | 60 mm (2.36 in) |
| Screw Length-to-Diameter Ratio | 11:1 |
| Overall Weight | 3000 kg (6500 lb) |
| Length | 2260 mm (89.0 in) |
| Width | 1500 mm (59.1 in) |
| Height | 1690 mm (66.5 in) |
| Floor-to-Extruder Centerline Height | 914 mm (36.0 in) |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Model | FMP-50 |
| Theoretical Capacity | 22,730 kg/h |
| Application | Polymer Melt Metering & Pressurization in Continuous Processing Lines |
| Compliance | Designed for ISO 9001-certified extrusion and compounding systems |
| Configuration | Gear-type positive displacement pump with hardened steel gears and precision-machined housing |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Model | FMP-50 |
| Theoretical Capacity | 22,730 kg/h |
| Design Type | Positive Displacement Gear Pump for Polymer Melt Extrusion |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Model | MM 150×300 FF |
| Roll Diameter | 150 mm |
| Roll Length | 330 mm |
| High-Speed Roll Max Speed | 27.4 rpm |
| Low-Speed Roll Max Speed | 20 rpm |
| Speed Ratio | 1:1.4 (fixed) |
| Roll Gap Adjustment Range | 0–10 mm |
| Adjustment Precision | ±0.1 mm |
| Roll Surface Treatment | Hardened, quenched & ground |
| Roll Cooling/Heating | Drilled rolls with rotary unions |
| Drive System | AC variable-frequency motor |
| Safety Compliance | EU Machinery Directive 2006/42/EC |
| Overload Protection | Mechanical torque-limiting clutch |
| Emergency Stop | Dual-channel safety brake system |
| Vibration Isolation | Integrated anti-vibration mounts |
| Brand | Fast & Fluid |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AT1600HS |
| Flow Rate | 0.47 L/min (max, high-speed mode) |
| Minimum Dispense Volume | 0.057 mL per drop |
| Number of Pigment Stations | 16 |
| Pigment Cartridge Capacity | 2.84 L each |
| Dimensions (W×D×H) | 122 × 89 × 61 cm |
| Weight | 167 kg |
| Power Supply | 220 V ±10%, 50/60 Hz |
| Nozzle Diameter | 4.13 mm |
| Dispensing Channels | 4 simultaneous |
| Enclosure Material | Chemically resistant polymer housing |
| Pump Technology | DVX® positive displacement stainless-steel diaphragm pumps |
| Integrated Optical Sensor Platform | Yes (for cartridge presence, level, and temperature monitoring) |
| Brand | Fast & Fluid |
|---|---|
| Origin | Netherlands |
| Model | HA180 / HA4880 |
| Pump Type | Harbil® ZeroPurge™ piston pump |
| Base Types Supported | Solvent-based, waterborne, universal, and preservative-free tints |
| Dispensing Volume Range | 0.05 mL minimum increment |
| Flow Rate | 0.4–0.5 L/min |
| Nozzle Diameters | 2 mm / 4 mm / 6 mm |
| Valve Material | Stainless steel ball valve with seals in PTFE / Viton Extreme / Viton |
| Tank Height Capacity | Up to 46 cm |
| Loading Height | 36 cm |
| Footprint | 44 × 31 cm |
| Power Supply | 230 V ±10%, 50/60 Hz |
| Optional Sensors | Optical tank level sensor, short-range proximity sensor |
| Brand | Fast & Fluid |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Variants | HA480 / HA180 / AT1600HS / AT1600 |
| Pump Type | Harbil® ZeroPurge™ Piston Pump |
| Solvent/Waterborne Compatibility | Yes |
| Colorant Canister Capacity | 16–32 units |
| Canister Volume Options | 2 L / 3 L / 6 L / 10 L |
| Material | High-Molecular-Weight Polymer Housing |
| Flow Rate | 0.8–1.0 L/min |
| Minimum Dispense Increment | 0.05 mL |
| Nozzle Diameters | 2 mm / 4 mm / 6 mm (Stainless Steel) |
| Valve Sealing Materials | PTFE / Perfluoroelastomer / FKM |
| Integrated Nozzle Closure System | Yes |
| Cleaning Method | Automatic Brush + Internal Recirculation |
| Dispenser Platform | Motorized Vertical Adjustment |
| Platform Dimensions | 44 × 31 cm |
| Adjustable Height Range | 39–55 cm |
| Max Drum Height Clearance | 42–46 cm |
| Optical Canister Detection | Yes |
| Footprint (L×W×H) | 151×88×96 cm (min) to 171×88×96 cm (max) |
| Brand | Fast & Fluid |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HA480 / HA180 |
| Colorant Tank Capacity | 2 L / 3 L / 6 L / 10 L / 20 L (16–32 stainless steel tanks) |
| Dispensing Precision | ±0.1 g |
| Minimum Dispense Unit | 0.05 mL |
| Flow Rate | 0.8–1.0 L/min |
| Pump Technology | Harbil® ZeroPurge™ Internal Recirculating Piston Pump |
| Temperature Control | Integrated Intelligent Thermal Management System |
| Dimensions (Low Version) | 151 × 88 × 96 cm |
| Dimensions (High Version) | 171 × 88 × 96 cm |
| Power Options | Electric Drum Platform |
| Optional Features | Electronic Pulse Dosing, Heater Integration |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FAST Fabric Assessment System |
| Price | USD 16,200 (FOB UK) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 010E-124 / 010E-125 / 010E-126 |
| Pricing | Available Upon Request |
| Brand | FuLand / csfriend |
|---|---|
| Origin | Hunan, China |
| Model | Compliant with GB/T 5096 |
| Temperature Range | Ambient to 150 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Heating Power | 1200 W |
| Display | LCD (English/Chinese) |
| Test Stations | 6 |
| Diagnostic Function | Built-in Self-Diagnosis & Auto-Tuning Capability |
| Oxygen Bomb Storage Compartment | Integrated |