Life Science Instruments
Filter
Showing 5491–5520 of 7558 results
| Brand | Sanotac |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | NX-200 |
| Carrier Type | Lipid Nanoparticle (LNP) |
| Flow Capacity | 200 mL/min |
| Pump Material | 316L Stainless Steel |
| Compliance | FDA 21 CFR Part 11 (via NanoFlu Software) |
| Patents | ZL202221027700.6, ZL202121807711.1 |
| Key | Brand: Sanotac |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | NX-600 |
| Carrier Type | Lipid Nanoparticle (LNP) |
| Flow Rate Range | 200 mL/min and 1000 mL/min |
| Flow Rate Reproducibility Error | ±0.5% |
| Maximum Operating Pressure | 20 MPa |
| Brand | Sanotac |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Manufacturer |
| Category | Imported Instrument |
| Model | 006EZS-25-10-AF |
| Pressure Rating | Up to 8 MPa (for 5 mm ID) |
| Internal Diameter Range | 5–50 mm |
| Column Height Range | 50–500 mm |
| Operating Temperature | 4–40 °C |
| pH Range | 1–14 |
| Material Composition | Borosilicate glass tube, PEEK™ end fittings, Chemraz® O-rings, PTFE frits and washers, ETFE compression nuts and ferrules |
| Chemical Compatibility | Compatible with aqueous buffers, acetonitrile, methanol, isopropanol, THF, DMSO, DMF, chloroform, dichloroethane, pyridine, formamide, toluene |
| Axial Compression | Single-end adjustable (AF), double-end adjustable (AA), or fixed-end (FF) configurations |
| Regulatory Compliance | Designed for GLP/GMP environments |
| Brand | Sanotac |
|---|---|
| Model | Pilot Series |
| Type | Medium-Pressure & Low-Pressure Protein Purification System |
| Purification Principle | Affinity Chromatography (AC) |
| Detector | Conductivity Detector |
| Conductivity Range | 0–999.9 mS/cm |
| Pump Material | PEEK |
| Flow Rate Range | 0.01–200 mL/min (model-dependent) |
| Pressure Range | 0–30 MPa (max) |
| UV Detection | 190–800 nm, Dual-Lamp (Deuterium + Tungsten), ±1 nm wavelength accuracy |
| Absorbance Range | 0–2 AU |
| Fraction Collector | 2 × 60-tube rack (15 mm × 150 mm) |
| Gradient Types | Linear and Isocratic, Online Editable |
| Gradient Resolution | 1% minimum step |
| pH Detection Range | 0–14 |
| Power Supply | 220 V ±10%, 50 Hz |
| Control Interface | RS-232 / USB, Windows XP/7-compatible workstation software |
| Brand | Santiyiqi |
|---|---|
| Model | ST-DW1 |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Power Supply | AC 110–240 V, 50–60 Hz |
| Dimensions | 310 × 226 × 233 mm |
| Weight | 3.7 kg |
| Touchscreen | 7-inch Android 10 interface |
| Data Storage | Up to 100,000 records |
| Connectivity | USB, Wi-Fi, Ethernet |
| Titration Accuracy | ≤1.5% |
| Repeatability | ≤0.2% |
| 10 mL Burette Capacity Accuracy | ±5 µL |
| 20 mL Burette Capacity Accuracy | ±10 µL |
| Potential Range | −2000 to +2000 mV |
| Potential Resolution | 0.1 mV |
| Potential Basic Error | ±0.25‰ of full scale |
| Potential Stability | ±0.3 mV / 3 h |
| pH Range | 0–14 |
| pH Resolution | 0.01 |
| pH Basic Error | ±0.01 |
| Temperature Measurement Range | −5 to 105 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Basic Error | ±0.2 °C |
| Operating Environment | 0–40 °C, 10–75% RH |
| Storage Environment | 0–40 °C, 10–90% RH |
| Standard Electrodes | 6501 Glass Composite pH Electrode, 5004 Redox Electrode, 2616 Silver Composite Electrode (Cl⁻), T-2 ATC Temperature Probe |
| Burettes Included | 10 mL and 20 mL |
| Stirring | Integrated Magnetic Stirrer |
| Titration Modes | Dynamic, Equivalence-Point, Manual, Predefined Endpoint |
| Method Storage | ≥100 user-defined titration methods |
| Custom Calculation Formula Support | Yes |
| Auto-purge, Flush & Drain Functions | Yes |
| Brand | SANXIN-Peirui |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Conductivity Calibration Standard |
| Pricing | Available Upon Request |
| Certified Accuracy | ±0.3% at 25 °C |
| Available Conductivity Values | 84 µS/cm, 146.6 µS/cm, 1408 µS/cm, 1413 µS/cm, 12.85 mS/cm, 12.88 mS/cm |
| Volumes | 50 mL, 250 mL, 500 mL per bottle |
| Brand | SANYO |
|---|---|
| Origin | Japan |
| Model Series | MDF-U32V(N), MDF-U53V, MDF-U73V |
| External Dimensions (W×D×H) | 670×867×1860 mm / 770×875×1990 mm / 1010×875×2010 mm |
| Internal Dimensions (W×D×H) | 490×600×1140 mm / 630×600×1380 mm / 870×600×1400 mm |
| Effective Capacity | 333 L / 519 L / 728 L |
| Net Weight | ~225 kg / ~299 kg / ~349 kg |
| Power Consumption (220 V, 50 Hz) | 610 W / 1070 W / 1120 W |
| Temperature Range | –50 °C to –86 °C (1 °C increments) |
| Cooling Performance | Maintains –86 °C at ambient 30 °C |
| Insulation | In-situ rigid polyurethane foam + Vacuum Insulation Panels (VIPs) |
| Exterior/Interior Material | Pre-coated steel |
| Shelves | 3 adjustable stainless-steel shelves |
| Doors | 1 outer door + 2 inner doors (foam-insulated) |
| Locking System | 1 external lock + 1 external latch |
| Casters | 4 (2 height-adjustable) |
| Access Ports | 3 × Ø17 mm (rear, lower-left, lower-right) |
| Alarm System | High/low temperature, power failure, filter maintenance, self-diagnosis, remote alarm contact (DC 30 V, 2 A), battery replacement alert |
| Standard Accessories | 1 set of keys, 1 defrost ice scraper |
| Brand | Dynamax |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | SapIP |
| Pricing | Upon Request |
| Brand | Sartorius |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CellCelector Flex |
| Separation Method | Fully Automated Image-Guided Microaspiration |
| Brand | Sartorius |
|---|---|
| Origin | Shanghai, China |
| Model | CellCelector Flex |
| Separation Method | Fully Automated |
| Regulatory Compliance | GLP/GMP-Compliant Workflow Architecture |
| Imaging Modes | Brightfield, Phase Contrast, Fluorescence |
| Throughput | Up to 100+ single-cell picks per hour |
| Pick Accuracy | >95% for targeted subpopulations |
| Viability Post-Pick | ≥95% for monoclonal applications |
| Minimum Dispense Volume | ~1 nL |
| Compatible Vessels | Standard microplates (6–1536-well), Petri dishes, slides, filters, chips, PCR tubes, custom substrates |
| Brand | Sartorius |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Incucyte® CX3 |
| Temperature Control | 37 °C |
| Humidity Control | >90% RH |
| Imaging Mode | Spinning-Disk Confocal (optional) |
| Throughput | Up to 6 microplates simultaneously |
| Temporal Resolution | Configurable per experimental protocol |
| Software License | Unlimited Concurrent Users |
| Brand | Sartorius |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | Incucyte S3 |
| Pricing | Available Upon Request |
| Imaging Throughput | Experiment-Dependent |
| Brand | Sartorius |
|---|---|
| Origin | USA |
| Model | Incucyte S3, Incucyte SX1, Incucyte SX5 |
| Imaging Modes | Phase Contrast, Green Fluorescence (e.g., GFP), Red Fluorescence (e.g., RFP/mCherry) |
| Objective Lenses | 4×, 10×, 20× motorized auto-focus |
| Throughput | Up to 6 multiwell plates (96-well or 384-well) per run |
| Environmental Integration | Designed for continuous operation inside standard CO₂ incubators (37 °C, 5% CO₂, humidified) |
| Software Platform | Incucyte® Base Software v2023.1+ with VesselView™, PlateGraph™, and Mask-based analysis modules |
| Compliance | Supports audit trails, user access control, and electronic signatures compliant with FDA 21 CFR Part 11 and GLP/GMP workflows |
| Data Output | Time-lapse image stacks, quantitative metrics (confluence %, object count, neurite length, spheroid area/volume, migration distance), exportable to CSV, PNG, TIFF, and PDF |
| Brand | Sartorius |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Incucyte® SX1 |
| Pricing | Available Upon Request |
| Imaging Throughput | Experiment-Dependent |
| Brand | Sartorius |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Incucyte® SX5 |
| Pricing | Available Upon Request |
| Temperature Control | 37 °C |
| Humidity Control | >90% RH |
| Imaging Throughput | Application-Dependent |
| Brand | Sartorius |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | iQue® 3 |
| Product Type | High-Throughput Flow Cytometer |
| Application | Research Use Only |
| Brand | Sartorius |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | iQue® 5 |
| Technology Platform | Imaging Flow Cytometry |
| Product Type | Flow Cytometry Analyzer |
| Throughput | 96-well plate in ≤5 min, 384-well plate in ≤20 min |
| Detection Channels | 27 independent parameters with per-channel voltage control |
| Sample Compatibility | Cells, microspheres, yeast, and submicron particles down to 0.2 µm |
| Plate Formats | 96-well and 384-well plates |
| Automation Interface | Compatible with robotic liquid handlers |
| Fluidics Architecture | Patented air-gap sampling with swappable needles/tubing |
| Software Platform | iQue® ForeCyt® v6.x (with audit trail, analysis automation, and GLP-compliant reporting) |
| Optional Accessory | iQue® Qmax mobile fluid management cart |
| Brand | Sartorius |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MA35 |
| Pricing | Upon Request |
| Capacity | 35 g |
| Readability | 0.01% |
| Sensor Resolution | 1 mg |
| Repeatability | ±0.2% (for initial sample mass ≥1 g) |
| Moisture Display Modes | % Moisture, % Dry Matter (Solids), % Ratio, Final Weight (g) |
| Drying Time Range | 0.1–99 min (adjustable in 0.1-min increments) |
| Heating Source | Infrared dark-field heating tube (metallic heater) |
| Heating Chamber | Top-hinged lid with wide opening angle |
| Replaceable Sample Pan Insert | Glass or FDA-compliant anodized aluminum |
| Temperature Range | 40–160 °C (1 °C increments) |
| User Interface | Icon-driven graphical guidance |
| Programmable Methods | 1 stored method |
| Data Output | Integrated thermal printer — supports basic report and GLP-compliant audit trail report |
| Dimensions (W×D×H) | 224 × 366 × 191 mm |
| Approx. Weight | 5.8 kg |
| Brand | Sartorius |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 14313–47–ACN |
| Instrument Type | Automated Membrane Transfer System for Microbial Limit Testing |
| Sample Throughput | Single-unit membrane transfer per cycle |
| Filter Membrane Diameter | 47 mm |
| Compatible Microorganisms | Bacteria, Yeasts, Molds |
| Agar Surface Area | 13.2 cm² |
| Dimensions | Ø68.8 mm × H14.9 mm |
| Membrane Material | Polypropylene |
| Sterilization Method | Gamma irradiation (13.9–25.0 kGy) |
| Compatible Agar Media | R2A, Tryptic Soy Agar (TSA), Sabouraud Dextrose Agar (SDA) — inhibitor-free formulations |
| Brand | Sartorius |
|---|---|
| Origin | Germany |
| Model | 168M3-MS |
| Filter Cup Capacity | Bacteria, Fungi, Yeast |
| Membrane Diameter Compatibility | Standard 47 mm |
| Assembly Time | ≤2 min per sample |
| Construction | Electropolished AISI 316L Stainless Steel |
| Sterile Venting | Integrated 3-way stainless steel valve with independent channel control |
| Compatibility | Microsart® @Filter 100/250, Microsart® Funnel 100/250, Biosart® 100/250 pre-assembled grid membranes, flame-sterilizable stainless steel funnels, autoclavable glass and polycarbonate filtration units |
| Brand | Sartorius |
|---|---|
| Origin | Germany |
| Model | SMB01-201 |
| Instrument Type | Microbial Limit Testing System |
| Filter Cup Compatibility | Bacteria, Yeast, Molds |
| Membrane Diameter Support | 47 mm |
| Assembly Time | ≤2 min per sample |
| Sterile Venting | Integrated stainless steel 3-way valve |
| Material | Electropolished AISI 316L stainless steel |
| Compliance | Designed for ISO 8573-1 (compressed air purity), ISO 13408-1 (aseptic processing), and USP <61>/<62> microbiological testing workflows |
| Regulatory Alignment | Supports GLP/GMP documentation requirements via traceable system setup and operator-intervention logs |
| Brand | Sartorius |
|---|---|
| Origin | Germany |
| Model | 166MP-4 |
| Instrument Type | Direct-discharge vacuum pump for microbial filtration |
| Maximum Membrane Pressure | 600 mbar |
| Air Flow Rate | ≥4.0 N·L/min (at ambient conditions, dry air) |
| Filtration Compatibility | Bacteria, yeasts, molds |
| Footprint Reduction vs. Conventional Systems | ~70% |
| Connection Interface | DN10 push-fit quick-connect fittings |
| Vacuum System Architecture | Oil-free, direct-discharge (no collection flask or trap required) |
| Brand | Sartorius |
|---|---|
| Origin | Germany |
| Model | 16713-BO |
| Dimensions (L × H × W) | 233 × 172 × 230 mm |
| Weight | 2.6 kg |
| Power Options | AC adapter or built-in rechargeable battery |
| Membrane Feed Mechanism | Motor-driven sprocket roller system |
| Activation Modes | Touch button, infrared optical sensor (hands-free), foot switch |
| Compatible Membrane Format | Pre-folded sterile strip-packaged filters, 47 mm diameter (standard) |
| Membrane Type Support | Cellulose ester (CE), polyethersulfone (PES), nylon, and other standard microbiological filtration membranes |
| Compliance | Designed for ISO 11737-1, USP <61>, <62>, and EU Ph. Eur. 2.6.12 environments |
| Brand | Sartorius |
|---|---|
| Origin | Germany |
| Model | Microsart™ e.motion |
| Membrane Material | Nitrocellulose (CN) |
| Pore Sizes | 0.2 µm, 0.45 µm, 0.8 µm |
| Diameters | 47 mm, 50 mm |
| Surface Finish | White/Black, Grey/White, Green/Dark Green, White/Green |
| Packaging | Individually sealed in proprietary folded pouches, sterile, no protective backing paper |
| Compatibility | Designed exclusively for Microsart™ e.motion filter dispenser and Sartorius adsorption pads |
| Brand | Sartorius |
|---|---|
| Origin | Germany |
| Product Line | Minisart |
| Membrane Types | Cellulose Acetate (CA), Polyethersulfone (PES), Glass Fiber (GF), Regenerated Cellulose (RC), Polytetrafluoroethylene (PTFE) |
| Sterility | Gamma-irradiated, Non-pyrogenic, DNase/RNase-free options available |
| Available Pore Sizes | 0.1 µm, 0.2 µm, 0.45 µm, 0.8 µm, 1.2 µm |
| Housing Material | Polypropylene |
| Diameter Options | 13 mm, 25 mm, 33 mm |
| Max Operating Pressure | ≤ 6 bar (87 psi) at 23 °C |
| Compatibility | Aqueous & organic solvents (membrane-dependent) |
| Regulatory Compliance | Meets ISO 8536-4, EN 14971 (risk management), and EU MDR 2017/745 requirements for in vitro diagnostic use where applicable |
| Brand | Sartorius |
|---|---|
| Origin | Germany |
| Model | 11327-41BL (0.22 µm), 11306-41BL (0.45 µm) |
| Format | Roll (30 cm × 3 m) |
| Protein Binding Capacity | >200 µg/cm² (IgG) |
| Pore Size Options | 0.22 µm, 0.45 µm |
| Pretreatment | Water-wet only — no methanol activation required |
| Material | 100% pure nitrocellulose |
| Compliance | Suitable for ISO/IEC 17025-compliant laboratories |
| Brand | Sartorius |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Octet SF3 |
| Pricing | Available Upon Request |
| Brand | Sartorius |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-manufactured under Sartorius OEM/technology license) |
| Model | Octet® R2 |
| Detection Method | Label-free Bio-Layer Interferometry (BLI) |
| Sample Format | 96-well microplate |
| Sample Volume per Well | 200 µL |
| Assay Duration | 2–60 minutes |
| Temperature Control Range | 15–40 °C |
| Brand | Sartorius |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Octet® R4 |
| Detection Method | Label-Free Biosensor-Based Interferometry (BLI) |
| Sample Format | 96-Well Microplate |
| Sample Volume per Well | 200 µL |
| Assay Duration | 2–60 min |
| Temperature Control Range | 15–40 °C |
| Brand | Sartorius |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Octet® R8 |
| Instrument Type | Bio-Layer Interferometry (BLI) |
| Detection Mode | Label-Free Detection |
| Sample Format | 96-Well Microplate |
| Sample Volume per Well | 200 µL |
| Assay Duration | 2–60 minutes |
| Temperature Control Range | 15–40 °C |