Optical Instruments
Filter
Showing 2251–2280 of 7437 results
| Brand | JEOL |
|---|---|
| Origin | Japan |
| Model | Gather-X |
| Mounting Type | Side-entry (inclined insertion) |
| Energy Resolution | ≤129 eV (Mn-Kα), ≤59 eV (C-Kα) |
| Peak-to-Background Ratio | 20,000:1 |
| Maximum Count Rate | >500,000 cps |
| Elemental Detection Range | Li to U |
| Detector Active Area | 100 mm² |
| Window Type | Windowless |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | 4510F |
| Automation Level | Fully Automated |
| Lamp Holder | Rotating 4-Lamp Turret |
| Wavelength Range | 190–900 nm |
| Wavelength Accuracy | ±0.3 nm |
| Wavelength Repeatability | ≤0.15 nm |
| Absorbance Range | –0.1 to 2.5 A |
| Spectral Bandwidth | 0.1 / 0.2 / 0.4 / 1.0 nm (selectable) |
| Baseline Stability | ≤0.005 A/30 min (Cu) |
| D₂ Background Correction | ≥50× at 1 A background signal |
| Self-Reversal Background Correction | Supported |
| Flame System | Acetylene-Air, 100 mm Burner Head |
| Nebulizer Chamber | Polypropylene-Coated |
| Characteristic Concentration (Cu) | ≤0.02 µg/mL per 1% absorption |
| RSD of Measurement | ≤0.5% |
| Detection Limit (Cu) | ≤0.006 µg/mL |
| Safety Interlocks | Gas pressure monitoring, flame-out detection, power interruption cutoff, burner head recognition |
| Optional Accessories | 4510GF Graphite Furnace Module, AS4020 Graphite Furnace Autosampler, AS800 Chiller Unit, Hydride Generation System |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Type | Automatic |
| Model | L6S / L6 |
| Haze Range | ≤ 0.15% T |
| Transmittance Range | 0.0–200.0% T |
| Absorbance Range | −0.301–4.000 A |
| Concentration Range | 0.000–9999 C |
| Haze Repeatability | 0.1 nm |
| Transmittance Repeatability | ≤ 0.15% T |
| Wavelength Range | 190–1100 nm |
| Spectral Bandwidth | 1.8 nm |
| Wavelength Accuracy | ±0.3 nm |
| Wavelength Repeatability | ≤ 0.1 nm |
| Stray Light | ≤ 0.03% T (at 220 nm, NaI |
| Photometric Accuracy | ±0.3% T |
| Photometric Repeatability | ≤ 0.15% T |
| Baseline Flatness | ≤ ±0.0015 A (200–1090 nm, L6S only) |
| Baseline Drift | 0.0009 A/0.5 h (after 2 h warm-up, at 250 nm & 500 nm, L6S only) |
| Detector | Imported photodetector |
| Monochromator | Czerny-Turner, 160 mm focal length, 1200 lines/mm holographic blazed grating |
| Light Source | Imported long-life deuterium lamp (D₂) and OSRAM tungsten-halogen lamp |
| Light Path | Ratio-monitoring double-beam |
| Wavelength Switching Point | 340 nm |
| Interface | USB |
| Power Supply | AC 220 V ± 22 V, 50 Hz ± 1 Hz |
| Rated Power | 200 W |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SGW-810 |
| Price Range | USD 4,200 – 7,000 |
| Type | Fully Automated |
| Haze Range | 0–30.00% |
| Transmittance Range | 0–100.0% |
| Haze Repeatability | ±0.05% (for haze ≤0.5%), ±0.1% (for haze >0.5%) |
| Transmittance Repeatability | ±0.5% |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | SGW-810A |
| Product Type | Fully Automatic |
| Haze Range | 0–30.00% |
| Transmittance Range | 0–100.0% |
| Haze Repeatability | ±0.05% (for haze ≤0.5%), ±0.1% (for haze >0.5%) |
| Transmittance Repeatability | ±0.5% |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SGW-810B |
| Haze Range | 0–30.0% |
| Transmittance Range | 0–100.0% |
| Haze Repeatability | ≤±0.1% (at haze ≤0.5%), ≤±0.3% (at haze >0.5%) |
| Transmittance Repeatability | ±0.5% |
| Preheat Time | 30 min |
| Transmittance Accuracy | ≤±1.0% |
| Haze Accuracy | ≤±0.1% (≤0.5%), ≤±0.3% (>0.5%) |
| Minimum Display Resolution | 0.01% (both haze and transmittance) |
| Light Source | C-illuminant (6774 K) |
| Detector | Silicon Photocell |
| Optical System | Collimated Illumination + Diffuse Viewing + Integrating Sphere Detection |
| Sample Port Aperture | Input Ø25 mm, Output Ø21 mm |
| Solid Sample Size | 50 mm × 50 mm |
| Liquid Cell Dimensions | 50 mm × 50 mm × 10 mm |
| Film Sample Size | 50 mm × 50 mm |
| Power Supply | 220 V, 50 Hz |
| Net Weight | 21 kg |
| Compliance Standards | GB/T 2410–2008, ASTM D1003–2007, JIS K7105–1981 |
| Brand | GBPI |
|---|---|
| Model | SGW-810C |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Type | Fully Automatic |
| Haze Range | 0–30.0% |
| Transmittance Range | 0–100.0% |
| Haze Repeatability | ≤±0.1% (for haze ≤0.5%) |
| Transmittance Repeatability | ±0.5% |
| Preheat Time | 30 min |
| Transmittance Accuracy | ≤±1.0% |
| Haze Accuracy | ≤±0.1% (≤0.5%), ≤±0.3% (>0.5%) |
| Minimum Resolution | 0.01% (both haze and transmittance) |
| Light Source | C-illuminant (6774 K) |
| Detector | Silicon Photocell |
| Optical Configuration | Collimated Illumination, Diffuse Viewing, Integrating Sphere Detection |
| Sample Port Aperture | Input Ø25 mm, Output Ø21 mm |
| Solid Sample Size | 50 mm × 50 mm |
| Liquid Cell Dimensions | 50 mm × 50 mm × 10 mm |
| Film Sample Size | 50 mm × 50 mm |
| Display | Large-Touch LCD Screen |
| Power Supply | 220 V, 50 Hz |
| Net Weight | 21 kg |
| Compliance Standards | GB/T 2410–2008, ASTM D1003–2007, JIS K7105–1981 |
| Brand | GBPI |
|---|---|
| Model | SGW-810D |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Fully Automatic Optical Analyzer |
| Haze Range | 0–30.0% |
| Luminous Transmittance Range | 0–100.0% |
| Haze Repeatability | ≤±0.1% (for haze ≤0.5%), ≤±0.3% (for haze >0.5%) |
| Transmittance Repeatability | ±0.5% |
| Preheat Time | 30 min |
| Transmittance Accuracy | ≤±1.0% |
| Haze Accuracy | ≤±0.1% (≤0.5%), ≤±0.3% (>0.5%) |
| Minimum Resolution | 0.01% (both haze and transmittance) |
| Light Source | C-illuminant (6774 K) |
| Detector | Silicon Photocell |
| Optical Configuration | Collimated Illumination + Diffuse Viewing + Integrating Sphere Detection |
| Sample Port Aperture | Input Ø25 mm, Output Ø21 mm |
| Solid Sample Size | 50 mm × 50 mm |
| Liquid Cell Dimensions | 50 mm × 50 mm × 10 mm |
| Film Sample Size | 50 mm × 50 mm |
| Power Supply | 220 V, 50 Hz |
| Net Weight | 21 kg |
| Compliance Standards | GB/T 2410–2008, ASTM D1003–2007, JIS K7105–1981 |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SGW810-A |
| Product Type | Fully Automatic |
| Haze Range | 0–30.0% |
| Transmittance Range | 0–100.0% |
| Haze Repeatability | ≤0.05% (at haze ≤0.5%), ≤0.1% (at haze >0.5%) |
| Transmittance Repeatability | ±0.5% |
| Preheating Time | 30 min |
| Transmittance Accuracy | ±1.0% |
| Haze Accuracy | ±0.1% (≤0.5%), ±0.3% (>0.5%) |
| Minimum Resolution | 0.01% (both haze and transmittance) |
| Light Source | C-illuminant (6774 K) |
| Detector | Silicon Photocell |
| Optical System | Collimated Illumination + Diffuse Viewing + Integrating Sphere Detection |
| Sample Port Aperture | Input Ø25 mm, Output Ø21 mm |
| Solid Sample Size | 50 mm × 50 mm |
| Liquid Cell Dimensions | 50 mm × 50 mm × 10 mm |
| Film Sample Size | 50 mm × 50 mm |
| Power Supply | 220 V, 50 Hz |
| Net Weight | 21 kg |
| Compliance Standards | GB/T 2410–2008, ASTM D1003–2007, JIS K7105–1981 |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SGW810-B |
| Product Type | Fully Automatic |
| Haze Range | 0–30.0% |
| Transmittance Range | 0–100.0% |
| Haze Repeatability | ≤0.05% (at haze ≤0.5%) |
| Transmittance Repeatability | ±0.5% |
| Preheating Time | 30 min |
| Transmittance Accuracy | ±1.0% |
| Haze Accuracy | ±0.1% (≤0.5% haze) |
| Minimum Resolution | 0.01% for both transmittance and haze |
| Light Source | C-illumination (6774 K) |
| Detector | Silicon photodiode |
| Optical Configuration | Collimated illumination, diffuse viewing, integrating sphere detection |
| Sample Port Aperture | Input Ø25 mm, Output Ø21 mm |
| Solid Sample Size | 50 mm × 50 mm |
| Liquid Cell Dimensions | 50 mm × 50 mm × 10 mm |
| Film Sample Size | 50 mm × 50 mm |
| Display | Large LCD touchscreen interface |
| Power Supply | 220 V, 50 Hz |
| Net Weight | 21 kg |
| Compliance Standards | GB/T 2410–2008, ASTM D1003–2007, JIS K7105–1981 |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SGW810-G |
| Pricing Range | USD 4,200 – 7,000 (FOB) |
| Type | Fully Automated |
| Haze Range | 0–30.0% |
| Transmittance Range | 0–100.0% |
| Haze Repeatability | ≤0.05% (for haze ≤0.5%) |
| Transmittance Repeatability | ±0.5% |
| Preheat Time | 30 min |
| Transmittance Accuracy | ±1.0% |
| Haze Accuracy | ±0.1% (≤0.5%), ±0.3% (>0.5%) |
| Minimum Resolution | 0.01% (both haze and transmittance) |
| Light Source | C-illuminant (6774 K) |
| Detector | Silicon photodiode |
| Optical Configuration | Collimated illumination, diffuse viewing geometry, integrating sphere detection |
| Sample Port Aperture | Input Ø25 mm, Output Ø21 mm |
| Solid Sample Size | 50 mm × 50 mm |
| Liquid Cell Dimensions | 50 mm × 50 mm × 10 mm |
| Film Sample Size | 50 mm × 50 mm |
| Power Supply | 220 V AC, 50 Hz |
| Net Weight | 21 kg |
| Compliance | GB/T 2410–2008, ASTM D1003–2007, JIS K7105–1981 |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Type | Fully Automatic |
| Haze Range | 0–30.0% |
| Transmittance Range | 0–100.0% |
| Haze Repeatability | ≤0.05% (for haze ≤0.5%) |
| Transmittance Repeatability | ±0.5% |
| Preheat Time | 30 min |
| Transmittance Accuracy | ±1.0% |
| Haze Accuracy | ±0.1% (haze ≤0.5%) |
| Minimum Resolution | 0.01% (both transmittance and haze) |
| Light Source | C-illuminant (6774 K) |
| Detector | Silicon Photocell |
| Optical Configuration | Collimated Illumination, Diffuse Viewing, Integrating Sphere Detection |
| Sample Port Aperture | Input Ø25 mm, Output Ø21 mm |
| Solid Sample Size | 50 mm × 50 mm |
| Liquid Cell Dimensions | 50 mm × 50 mm × 10 mm |
| Film Sample Size | 50 mm × 50 mm |
| Power Supply | 220 V, 50 Hz |
| Net Weight | 21 kg |
| Compliance Standards | GB/T 2410–2008, ASTM D1003–2007, JIS K7105–1981 |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | WSB-L |
| Price | Upon Request |
| Measurement Range | 0–120% |
| Resolution | 0.1% |
| Illumination Geometry | 45°/0° |
| Peak Wavelength | 457 nm |
| Detector | Silicon Photodiode |
| Stability | ±0.2% |
| Repeatability | 0.3% |
| Accuracy (Indication Error) | ±1.5% |
| Compliance Standards | GB/T 5950, GB/T 2931, GB/T 8940.1 |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GC-5000 |
| Pricing | Upon Request |
| Light Source | 12 V / 50 W Halogen Lamp (≈6000 h Lifetime) |
| Optical Calibration | Full-Wavelength Continuous Correction |
| Sample Size Range | 30 × 30 mm (min) to 180 × 220 mm (max) |
| Illumination Angle | Reflectance Mode: 0°–80° (5° increments) |
| Transmittance Mode | 180° |
| Receiving Angle Range | −80° to +80° (excl. ±10° around incident angle in reflectance mode) |
| Angular Resolution | 5° motorized rotation of detector arm |
| Detector | Silicon Photodiode |
| Spectral Bandpass | Interference Filters, 400–700 nm, 20 nm step |
| Sensitivity Settings | Four-step gain control (Reflectance: Std, 1/4, 1/10, 1/200 |
| Transmittance | ×20, ×50, ×200) |
| Interface | RS-232C Serial Communication |
| Dimensions (W × D × H) | 340 × 520 × 310 mm |
| Diameter | 5.0–50.0 mm |
|---|---|
| Split Ratio Options | 30R/70T, 50R/50T, 70R/30T |
| Wavelength Ranges | VIS (400–700 nm), NIR (700–1100 nm), SWIR (1100–2500 nm) |
| Material | BK7 glass with dielectric coating |
| Surface Flatness | λ/10 @ 633 nm |
| AR Coating | R < 0.25% per surface |
| Damage Threshold | >5 J/cm² @ 1064 nm, 10 ns pulse |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | GCBS2 |
| Price Range | USD 140–420 (based on volume and configuration) |
| Component Category | Optical Element |
| Material | H-ZF3 Optical Glass |
| Surface Flatness | λ/10 @ 633 nm |
| Surface Quality | 3–4 Scratch-Dig |
| Clear Aperture | ≥90% of face dimension |
| Beam Deviation (Transmitted) | ≤3 arcmin |
| Beam Deviation (Reflected) | ≤3 arcmin |
| Dimensional Tolerance | ±0.2 mm |
| Edge Treatment | Protective Chamfer |
| Coating | Broadband Anti-Reflection (AR) on non-splitting faces |
| Transmission Efficiency (P-polarized) | TP >90% |
| Reflection Efficiency (S-polarized) | RS >99.5% |
| Extinction Ratio (TP/TS) | >1000:1 |
| Operating Angle | 45° ±5° incidence |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | GCBS3 |
| Price Range | USD 72–143 |
| Component Category | Optical Element |
| Cube Side Lengths | 5.0, 10.0, 12.5, 15.0, 20.0, 25.4, 50.0 mm |
| Splitting Ratios (R/T) | 10/90, 30/70, 50/50, 70/30, 90/10 |
| Spectral Ranges | VIS (400–700 nm), NIR (700–1100 nm), SWIR (1100–1600 nm) |
| Mounting | Uncoated or AR-coated faces available per custom specification |
| Surface Flatness | λ/10 typical |
| Wavefront Distortion | < λ/8 over clear aperture |
| Material | UV-Fused Silica or BK7 (application-dependent) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | GCGBP |
| Price Range | USD 0.15–75.00 (per unit) |
| Component Category | Optical Element |
| Available Diameters | Φ12.5 mm, Φ25 mm, Φ50 mm |
| Square Format | 50 × 50 mm |
| Center Wavelengths (CWL) | 318 nm to 530 nm |
| Optical Density (OD) @ Blocking Regions | ≥4.0 (typical) |
| Substrate Material | Schott or equivalent color glass (e.g., UG, BG, KG series) |
| Surface Quality | 60-40 scratch-dig |
| Parallelism | <3 arcmin |
| Thickness Tolerance | ±0.1 mm |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Product Origin | Domestic (China) |
| Model | GCGLP |
| Price Range | USD 0.80 – 399.00 |
| Component Category | Optical Element |
| Available Diameters | Φ12.5 mm, Φ25 mm, Φ50 mm |
| Square Format | 50 × 50 mm |
| Center Wavelength Options | 280 nm to 1000 nm |
| Filter Color Coding | Clear, Yellow, Orange, Red, Black |
| Substrate Material | Colored optical glass (e.g., Schott BG, OG, RG series equivalents) |
| Typical Application | Spectral band selection, UV/Vis/NIR blocking, fluorescence excitation/emission isolation, laser safety, imaging system contrast enhancement |
| Brand | Zhongjiao Jinyuan |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GCI-7103M |
| Component Category | Light Source Accessory |
| Aperture Diameter | Φ20 mm |
| Timing Range | 1 ms – 27 h |
| Timing Accuracy | ±1 ms |
| Power Supply | AC 220 V, 0.8 A |
| Shutter Operating Voltage | DC 12 V |
| Shutter Operating Current | <200 mA |
| Load Channels | 3 independent channels |
| Interface | USB & RS232 |
| Control Modes | Auto-cycle, B-mode, T-mode |
| Trigger Options | Manual, Wireless Remote (10 m range), TTL (60 cm cable) |
| External Trigger Cable Length | 90 cm |
| Panel Interface | LCD + capacitive touch keys |
| Software Support | ASCII command protocol, GUI-based configuration utility |
| Brand | CNI (China Education Goldsource) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Origin Category | Domestic (PRC) |
| Model | GCl Electronic Shutter (20 mm) – Precision Electronic Controller |
| Component Category | Optical Component |
| Aperture Diameter | Ø20 mm |
| Timing Range | 1 ms – 27 h |
| Timing Accuracy | ±1 ms |
| Power Supply | AC 220 V, 0.8 A |
| Shutter Operating Voltage | DC 12 V |
| Shutter Operating Current | <200 mA |
| Load Channels | 3 independent channels |
| Interface Options | USB & RS232 |
| Control Modes | Auto-cycle, B-mode, T-mode |
| Trigger Options | Manual push-button, Wireless remote (10 m range), TTL-level input (60 cm cable) |
| External Trigger Cable Length | 90 cm |
| Panel Interface | LCD display + capacitive touch keys |
| Software Support | ASCII command protocol, GUI-based configuration utility |
| Origin | South Korea |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | GDFB Series Honeycomb Breadboard |
| Pricing | Upon Request |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | GDMLP |
| Price Range | USD 0.15–75.00 (per unit) |
| Component Category | Optical Element |
| Substrate Material | Optical-Grade Float Glass |
| Surface Flatness | λ/4 @ 633 nm |
| Parallelism | < 30 arcsec |
| Surface Quality | 3–4 scratch-dig |
| Diameter Tolerance | +0.0 / −0.1 mm |
| Thickness | 2.0 ± 0.2 mm |
| Center Wavelength (λC) | ±10 nm |
| Average Transmission (Tavg) | >90% in transmission band |
| Average Reflection (Ravg) | >98% in reflection band |
| Clear Aperture | >90% of nominal diameter |
| Angle of Incidence | 45° |
| λC Definition | Wavelength at which transmission = 50% |
| Available Sizes | Φ12.5 mm (part no. 12.5×17.5 mm), Φ25 mm (part no. 25×39 mm) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Regional Category | Domestic (China) |
| Model | GDMSP |
| Price Range | USD 0.15–75.00 (per unit, depending on size) |
| Component Category | Optical Element |
| Substrate Material | Optical-Grade Float Glass |
| Surface Flatness | λ/4 @ 633 nm |
| Parallelism | < 30 arcsec |
| Surface Quality | 3–4 scratch-dig |
| Diameter Tolerance | +0.0 / −0.1 mm |
| Thickness | 2.0 ± 0.2 mm |
| Center Wavelength (λc) | Specified ±10 nm |
| Average Transmission (Tavg) | >90% in passband |
| Average Reflection (Ravg) | >98% in stopband |
| Clear Aperture | >90% of nominal diameter |
| Angle of Incidence | 45° |
| λc Definition | Wavelength at which transmission = 50% |
| Available Sizes | Φ12.5 mm (12.5 × 17.5 mm rectangular variant), Φ25 mm (25 × 36 mm rectangular variant) |
| Brand | Jilin University–Xiaotianshe |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GDYS-101SB |
| Detection Limit | 5 PCU |
| Measurement Range | 0–200 PCU |
| Accuracy | ±5% |
| Compliance | GB/T 5750.4–2006 |
| Brand | Gentec-EO |
|---|---|
| Origin | Canada |
| Model | PRONTO |
| Power Range | 0.5 W to 250 W |
| Display | Touchscreen Color LCD |
| Calibration Wavelengths | 248 nm – 12.5 µm (YAG band) and 10.6 µm (CO₂) |
| Data Storage | Internal memory with USB export |
| Interface | USB and RS-232 serial control |
| Mounting | Dual 8-32 threaded holes |
| Compliance | NIST-traceable calibration certificates supplied |
| Detector Type | Thermopile-based |
| Form Factor | Handheld, pocket-sized portable unit |
| Brand | GEOMATEC |
|---|---|
| Origin | Japan |
| Product Type | Laser Beam Expander |
| Wavelength Options | 1064 nm, 532 nm, 355 nm |
| Expansion Ratios | 1.5×, 2×, 3×, 4×, 6×, 8×, 10× |
| Variable Zoom Models | EPZ-13C (1–3×), EPZ-37C (3–7×), EPZ-13W (1–3×, wide-field), EPZ(THG)-13C/37C (355 nm optimized) |
| Input Beam Diameter Range | Ø1.8–Ø8.0 mm |
| Output Beam Diameter Range | Ø8.0–Ø24.0 mm |
| Transmission | ≥95% (1064 nm/532 nm), ≥95% (355 nm) |
| Design | Achromatic, air-spaced, diffraction-limited performance |
| Mounting | Standard SM1 (1.035"-40) threaded housing compatible with OEM laser systems |
| Brand | TOP |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | WSY-1 |
| Pricing | Upon Request |
| Brand | Gerber |
|---|---|
| Model | WYA-2W |
| Measurement Range | nD 1.3000–1.7000 |
| Accuracy | ±0.0002 (nD), ±0.1% (Brix) |
| Temperature Display Range | 0–50 °C (0.1 °C resolution) |
| Mass | 10 kg |
| Interface | RS-232 serial port for data output |
| Brand | APE |
|---|---|
| Origin | Germany |
| Model | PulseCheck USB |
| Type | Scanning Autocorrelator for Ultrashort Laser Pulse Characterization |
| Wavelength Coverage | 200 nm – 2400 nm (configurable via optical modules) |
| Pulse Duration Range | 20 fs – 35 ps (dependent on module) |
| Scan Mechanism | Precision Linear Translation Stage with Real-Time Position Feedback |
| Detection Options | Photomultiplier Tube (PMT) and Photodiode (PD) |
| Interface | USB 2.0 with pulseLink Controller |
| Compliance | CE-marked, RoHS-compliant, Designed for GLP-Compatible Lab Environments |
| Software | Windows-based pulseView with TCP/IP support, Data Export (ASCII, CSV, HDF5), Trigger Synchronization (10 Hz – 50 kHz), FDA 21 CFR Part 11–Ready Audit Trail Optional |