Physical Property Testing Instruments
Filter
Showing 11881–11910 of 11951 results
| Brand | Zhonghuan Furnace |
|---|---|
| Model | TA-Z16B01 |
| Type | Benchtop High-Temperature Vacuum Contact Angle Measurement System |
| Max Operating Temperature | 1600 °C |
| Vacuum Level | ≤1×10⁻³ Pa |
| Atmosphere Control | Oxygen concentration <10⁻² ppm (in controlled inert/vacuum environment) |
| Imaging Speed | ≥30 fps continuous acquisition |
| Contact Angle Measurement Accuracy | ±1° |
| Software | Automated real-time calculation of θ, d, h, v during thermal cycles |
| Compliance | Designed for GLP-compliant lab environments with audit-ready data logging |
| Brand | Zhonghuan Furnace |
|---|---|
| Origin | Tianjin, China |
| Model | YA-Y16 |
| Temperature Range | RT–1600 °C (≤1400 °C under load) |
| Heating Rate | 0–20 °C/min adjustable |
| Heating Element | MoSi₂ rods |
| Thermocouple Type | Type B |
| Temperature Control Accuracy | ±1 °C |
| Temperature Measurement Accuracy | Class 0.2 |
| Sample Chamber Dimensions | 80 × 100 × 140 mm |
| Standard Sample Size | 3 × 8 × 60 mm |
| Fixture Material | Alumina |
| Indenter Material | Silicon Carbide |
| Maximum Load Capacity | 5 kN |
| Dimensional Shrinkage Resolution | 1 µm (dual-lens mode) / 10 µm (single-lens mode) |
| Image Acquisition Frequency | User-configurable |
| Power Supply | 220 V, 50 Hz, 5 kW |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DZ |
| Price | USD 2,800 (FOB Beijing) |
| Chamber Material | 304 Stainless Steel (customizable to 316 SS, aluminum, or carbon steel) |
| Internal Dimensions | Φ88 mm × 59 mm |
| External Dimensions | Φ112 mm × 65 mm |
| Weight | ~2.6 kg |
| Viewport Diameter | Φ47 mm |
| Vacuum Flanges | KF25 (pumping), KF16 (gauge), metric/inch gas fittings (M3/M6, 1/8″/1/4″), silicone diaphragm liquid injection port |
| Electrical Feedthroughs | 2 × 8-pin hermetic signal connectors (8 A rating) |
| Max Positive Pressure | ≤0.1 MPa |
| Base Pressure | ≤5 Pa (with rotary vane pump, 5 min) |
| Ultimate Pressure | ≤5×10⁻³ Pa (with turbomolecular pump, 30 min) |
| Operating Temperature Range | −190 °C to +1000 °C (chamber body) |
| sample stage | RT to +400 °C |
| Sample Stage | 28 mm × 28 mm stainless steel, resistive heating, PT100 sensing, ±0.5 °C accuracy, 50 °C/min max ramp rate |
| Temperature Control | 30-segment programmable PID with auto-tuning, 0.1 °C resolution, 7-inch HMI display |
| Surface Finishes | Electropolished, passivated, sandblasted, acid-washed, or mirror-finished per ASTM A967 / ISO 15730 |
| Sealing Options | Fluoroelastomer (FKM) O-rings or oxygen-free copper (OFHC) metal gaskets |
| Welding Process | Orbital TIG welding under high-purity argon purge |
| Leak Detection | Helium mass spectrometry (≤1×10⁻¹⁰ mbar·L/s sensitivity) |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | MJX-80 |
| Capacity | 80 L |
| Temperature Range | 5–65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±1 °C |
| Power Consumption | 600 W |
| Interior Dimensions (D×W×H) | 400×400×500 mm |
| Exterior Dimensions (D×W×H) | 610×560×1070 mm |
| Net Weight | 54 kg |
| Voltage/Frequency | 220 V / 50 Hz |
| Refrigerant | Eco-friendly non-CFC |
| Control System | Microprocessor-based PID controller with timer, over-temperature alarm, and fault diagnostics |
| Safety Features | Compressor overheat protection, UV sterilization lamp, magnetic door seal, dual-stage thermal cutoff |
| Optional Accessories | RS-485 interface, USB data logging, thermal printer, SMS alarm module |
| Brand | Zhongkejunchi |
|---|---|
| Origin | Beijing, China |
| Model | BR08 |
| Sample Division Capacity | 6 / 8 / 10 fractions |
| Feed Size Limit | <10 mm |
| Maximum Batch Volume | <5000 mL |
| Fraction Vial Options | 30 / 100 / 250 / 500 mL |
| Time Setting Range | 00:01–59:59 (mm:ss) |
| Operating Principle | Eccentric funnel feed + rotating distributor crown with gravity-driven, symmetrical radial discharge |
| Brand | Zhonglu |
|---|---|
| Model | DS C--500ARD |
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Temperature Range | Ambient to 500 °C |
| Heating Rate | 0.1–80 °C/min |
| Temperature Repeatability | ±0.1 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Resolution | 0.01 °C |
| Sample Capacity | 1 |
| DSC Signal Range | 0 to ±200 mW / 0 to ±500 mW |
| Atmosphere Control | Dual-gas auto-switching (N₂/Ar) |
| Display | 10.1-inch 24-bit color industrial touchscreen PC |
| Data Interfaces | USB 2.0, RS-232 |
| Calibration Standards | Indium (In), Tin (Sn), α-Al₂O₃ reference material |
| Compliance | ISO 11357, GB/T 19466, ASTM D3417 |
| Brand | Zhonglu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | DSC-500ARD |
| Price | USD 4,200 (approx.) |
| Temperature Range | Ambient to 500 °C |
| Heating Rate | 0.1–80 °C/min |
| Temperature Repeatability | ±0.1 °C |
| Temperature Accuracy | ±0.1 °C |
| Sample Capacity | 1 |
| Temperature Resolution | 0.01 °C |
| DSC Signal Range | 0 to ±200 mW / 0 to ±500 mW |
| Atmosphere Control | Dual-gas automatic switching |
| Display | 10.1-inch 24-bit color industrial touchscreen PC |
| Data Interfaces | USB 2.0, RS-232 |
| Calibration Standards | Indium (In) and Tin (Sn), certified reference materials included |
| Compliance | ISO 11357, GB/T 19466, ASTM D3417 |
| Brand | Zhonglu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DSC-500ARD |
| Price | USD 4,200 (approx.) |
| Temperature Range | Ambient to 500 °C ±0.1 °C |
| Heating Rate | 0.1–80 °C/min |
| Temperature Repeatability | ±0.1 °C |
| Temperature Accuracy | ±0.1 °C |
| Sample Capacity | 1 |
| Temperature Resolution | 0.01 °C |
| DSC Signal Range | ±200 mW / ±500 mW |
| Atmosphere Control | Dual-gas automatic switching |
| Display | 10.1-inch 24-bit color industrial touchscreen PC |
| Data Interfaces | USB, RS-232 |
| Calibration Standards | Indium and Tin reference materials included |
| Compliance | ISO 11357, GB/T 19466, ASTM D3417 |
| Brand | Zhonglu |
|---|---|
| Model | DSC-500ARD |
| Type | Differential Scanning Calorimeter (DSC) |
| Origin | Shanghai, China |
| Manufacturer | Zhonglu Instrument Co., Ltd. |
| Temperature Range | Ambient to 500 °C |
| Heating Rate | 0.1–80 °C/min |
| Temperature Accuracy | ±0.1 °C |
| Temperature Repeatability | ±0.1 °C |
| Temperature Resolution | 0.01 °C |
| Sample Capacity | 1 position |
| DSC Signal Range | 0 to ±200 mW / 0 to ±500 mW |
| Atmosphere Control | Dual-gas automatic switching (e.g., N₂/air) |
| Display | 10.1″ industrial-grade capacitive touchscreen (24-bit color) |
| Data Interfaces | USB 2.0, RS-232 |
| Compliance | ISO 11357, GB/T 19466, ASTM D3417 |
| Brand | Zhonglu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Differential Thermal Analysis (DTA) |
| Model | DTA-1350 |
| Temperature Range | RT to 1350 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Precision | ±0.1 °C |
| Temperature Stability | ±0.1 °C |
| Heating/Cooling Rate | 0.1–100 K/min |
| DTA Signal Range | 0–±2000 µV |
| DTA Sensitivity | 0.01 µV |
| Temperature Resolution | 0.01 °C |
| Control Method | PID-based Programmable Temperature Control |
| Data Interface | USB 2.0 |
| Display | 7-inch 24-bit color capacitive touchscreen |
| Sensor Material | Corrosion- and oxidation-resistant alloy |
| Atmosphere Control | Automated internal gas switching |
| Calibration Standard | Certified Sn reference material included |
| Compliance | ASTM E794, ISO 11357-1, GB/T 19466.1–2004 |
| Brand | Zhonglu |
|---|---|
| Model | TGA-1250Q |
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Temperature Range | Ambient to 1350 °C |
| Temperature Accuracy | ±0.01 °C |
| Temperature Resolution | 0.1 °C |
| Dynamic Weighing Range | 0.01 mg to 30 g |
| Balance Sensitivity | 0.1 μg |
| Mass Accuracy | ±0.00001 g |
| Heating/Cooling Rate | 1–80 °C/min |
| Maximum Sample Mass | 30 g |
| Baseline Repeatability | 25 ppm/10 °C |
| Baseline Drift | 25 ppm/10 °C |
| Atmosphere Control | Dual-gas inlet with mass flow control (inert, oxidizing, reducing, static/dynamic) |
| Cooling Time | ≤15 min (1000 °C → 100 °C) |
| Data Interface | RS-232 |
| Compliance | Patented in China (CN Patent No. disclosed upon request) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,050 (approx.) |
| Chamber Dimensions | Ø300 mm × L500 mm (cylindrical) |
| Inner Tank Material | SUS316 stainless steel (3 mm thick) |
| Outer Casing Material | SUS316 stainless steel (1 mm thick) |
| Insulation | Rock wool + rigid polyurethane foam |
| Heating Element | Finned-tube seamless stainless steel electric heater with platinum-plated surface |
| Safety Systems | Fuseless circuit breaker, over-temperature limiter, ceramic E-16 fast-acting fuse, compressor high/low-pressure and overheat protection, short-term water shortage alarm + long-term water shortage auto-shutdown, zero-crossing thyristor-based temperature/humidity power controller |
| Air Circulation | Multi-wing centrifugal fan with sealed motor |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ZLHS-150-CY |
| Price | USD 5,400 (FOB Shanghai) |
| Internal Chamber Dimensions (W×H×D) | 500 × 600 × 500 mm |
| External Dimensions | 700 × 1720 × 1480 mm |
| Power Consumption | 4.0 kW |
| Temperature Range | 0–70 °C |
| Temperature Uniformity | ±0.5 °C |
| Humidity Range | 30–65 %RH |
| Ozone Concentration Range | 50–500 pphm (parts per hundred million) |
| Gas Flow Velocity | 12–16 mm/s |
| Sample Rack | 360° continuous rotation at 1 rpm |
| Ozone Generation | Silent discharge tube type (standard), UV absorption type optional |
| Ozone Monitoring | QUA non-dispersive UV ozone analyzer (trace-level accuracy per ISO 1431-1) |
| Measurement Principle | Beer-Lambert law-based optical absorption |
| Air Purification System | Activated carbon adsorption + silica gel drying tower + thermal constant-temperature bath |
| Gas Path Design | Parallel ozone flow relative to specimen surface |
| Control System | AI digital PID controller with SSR output |
| Timer Resolution | 0.1 s (programmable up to 9999 h 59 min 59 s) |
| Data Interface | RS232 serial port, 4–20 mA analog output |
| Optional | PC-based real-time monitoring & data logging software with print/export capability |
| Electrical Supply | 220 VAC ±10%, 50/60 Hz |
| Safety Protections | Leakage current protection, over-temperature cutoff, motor overheat detection, over-current circuit breaker |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | ZLHS-250-SC |
| Sand/Dust Composition | Dry talc powder, silicate cement, fly ash |
| Sand Blowing Concentration | 2–4 kg/m³ |
| Sand Blowing Velocity | 2 m/s |
| Dust Blowing Concentration | 2–4 kg/m³ |
| Dust Blowing Velocity | 2 m/s |
| Test Volume (W×H×D) | 600 × 750 × 550 mm |
| Max Test Duration | 99 h 59 min |
| Vacuum Pressure Range | Adjustable, with analog gauge |
| Control System | Imported programmable microcomputer controller (Moeller/Klockner) |
| Filtration | Integrated air filter + pressure regulator + lubricator (FRL unit) |
| Fan Type | Enclosed alloy low-noise centrifugal blower |
| Heating System | Stainless steel mica-sheathed heating elements |
| Safety Protections | Leakage current protection, short-circuit protection, overtemperature cutoff, motor overheat & overload protection |
| Compliance | GB/T 2423.37–2006 (Test L), GB 7000.1–2007, GB 12085.6–1989, IEC 60529 (IP Code reference), EN 60529 |
| Brand | Zhulan Technology |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Model | ZLHS-60-WSH |
| Spray Mode | Continuous Spray |
| Spray Rate | 1.0–2.0 mL/80 cm²/hr |
| Nozzle Pressure | 0.8–2.0 bar |
| De-misting Method | Air Compression |
| Temperature Range | +5°C to 60°C |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | ZHY |
| Price | Upon Request |
| Power Supply | 60 W, 220 V, 50 Hz |
| Weight Range | 50 g to 2500 g |
| Indenter Ball Diameter | 1 mm |
| Dimensions (L×W×H) | 380 × 300 × 180 mm |
| Net Weight | 25 kg |
| Brand | ZHYC Materials |
|---|---|
| Origin | Japan |
| Model | Fatigue DV-1000 |
| Instrument Type | Electro-Hydraulic Servo Fatigue Testing Machine |
| Maximum Test Load | 1000 kN |
| Frequency Range | 0–100 Hz |
| Host Weight | 1000 kg |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | HY-621 |
| Price | Upon Request |
| Reciprocating Stroke | 75 mm |
| Clamp Width (Transverse) | 25 mm |
| Clamp Assembly Mass (Longitudinal) | 0.28–0.34 kg |
| Center-to-Center Distance Between Clamps | 6.35 mm |
| Mesh Engagement Angle | 60° |
| Test Actuation Angle | 30° |
| Counter | LCD Digital, 0–999,999 Cycles |
| Auto-Stop Function | Enabled upon separation failure (zipper teeth detachment from tape or interlocking disengagement) |
| Brand | Zhonghang Shidai |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (PRC-Made) |
| Model | ZJC-50E |
| Price Range | USD 2,800 – 15,500 (FOB) |
| Maximum Test Voltage | 50 kV AC/DC |
| Electrical Capacity | 3 kVA |
| Voltage Accuracy (10–100% FS) | ≤ ±2% |
| Ramp Rates | 0.1, 0.2, 0.5, 1.0, 2.0 kV/s |
| Electrode Configurations | Two Ø25 mm × 25 mm electrodes |
| Safety Disconnection Time upon Breakdown | ≤ 0.1 s |
| Dimensions (W×D×H) | 1100 × 800 × 1500 mm |
| Power Supply | AC 220 V, 50/60 Hz, 16 A |
| Brand | AVIC Era |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZJC-50KV Dielectric Breakdown Tester |
| Output Voltage | AC/DC 0–50 kV |
| Output Power | 3 kVA |
| Measurement Accuracy | ≤1% F.S. |
| Voltage Ramp Rate | 0.02–10 kV/s |
| Withstand Time Range | 0–4 h (no-load) |
| Leakage Current Setting | 1–20 mA |
| Input | AC 220 V ±10%, 50 Hz ±1% |
| Dimensions (L×W×H) | 1000 × 500 × 1100 mm |
| Weight | 100 kg |
| Grounding Requirement | Dedicated protective earth per GB/T 16895 and IEC 61000-5-1 |
| Brand | ZK Electronics |
|---|---|
| Model | GTC-203H |
| Principle | Differential Pressure (Manometric) Method |
| Test Gases | O₂, CO₂, N₂, Air |
| Sample Types | Plastic Films, Composite Films, High-Barrier Materials, Sheets, Metal Foils, Proton Exchange Membranes (PEM), Elastomers |
| Independent Test Chambers | 3 |
| Temperature Control Range | Ambient to 60 °C (±0.1 °C) |
| Humidity Control Range | 0–90% RH (±1% RH) |
| Vacuum System | Integrated Dual-Stage Rotary Vane Pump (Ultimate Vacuum ≤ 5 Pa) |
| Compliance Standards | GB/T 1038, ASTM D1434, ISO 2556, ISO 15105-1, JIS K7126-A, YBB 00082003 |
| Data Integrity Features | Audit Trail, Electronic Signatures, Role-Based Access Control (GMP-Compliant Software Option) |
| Calibration | Certified Standard Film Included |
| Data Export | CSV, PDF, XML |
| Safety Options | Modified Configuration Available for Toxic/Flammable Gases (e.g., H₂, CH₄, SO₂) |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Producer |
| Model | ZK2130 |
| Measurement Range | 20–150 Ω |
| Measurement Length | 0.05–2 m |
| Bandwidth | 3 GHz |
| Accuracy | ±1% at 50 Ω |
| Test Speed | ≤1 s per point |
| Compliance | Designed for IPC-TM-650 2.5.1 and IEC 61189-2 compliant impedance verification |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | ZK3185 |
| Price | Upon Request |
| Impedance Measurement Range | 20–200 Ω |
| Measurement Length | 0.02–2 m |
| Bandwidth | 0.1–8.5 GHz |
| TDR Accuracy | ±1% @ 50 Ω |
| Measurement Speed | ≤1 s per point |
| S-Parameter Capability | Yes |
| Dynamic Range | >100 dB |
| Calibration | Full user-accessible multi-point calibration |
| Brand | ZKDZ |
|---|---|
| Model | NLY-20H |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Standard Torque Range | 20 N·m (configurable options: 5 / 10 / 40 N·m) |
| Torque Resolution | 0.001 N·m |
| Accuracy Class | 0.5 |
| Angular Measurement Range | Customizable |
| Clamping Diameter Range | Φ5–Φ180 mm |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 360 × 290 × 300 mm |
| Net Weight | ~15 kg |
| Compliance Standards | GB/T 17876, ASTM D2063, ASTM D3198, ASTM D3474, BB/T 0025, BB/T 0034 |
| Display | Industrial-grade color touchscreen interface |
| Data Output | Built-in thermal mini-printer, optional PC software with statistical analysis and audit trail capability |
| Brand | Guance Instruments |
|---|---|
| Origin | Beijing, China |
| Model | ZKMD-18798c |
| Instrument Type | Portable Bulk Density Tester |
| Sample Form | Free-flowing dry powders (e.g., instant tea granules) |
| Compliance | GB/T 4676 (Sampling and Sample Reduction for Tea), ASTM D1895–22 (Standard Test Methods for Apparent Density of Plastic Materials in Powder, Pellet, or Flake Form), ISO 60:2023 (Determination of Bulk Density of Powders) |
| Brand | ZKWN |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | GEST-126 |
| Measurement Principle | Four-Probe DC Resistivity Method with Controlled Compaction |
| Compliance Standards | YS/T 587.6–2006, GB/T 24525–2009, GB/T 24521–2009, GB/T 3782–2016 |
| Resistivity Range | 10⁻⁶ – 10⁵ Ω·cm |
| Resolution | 10⁻⁸ Ω·cm |
| Voltage Ranges | 2 mV / 20 mV / 200 mV / 2 V |
| Current Output | 10 μA – 10 A (8 ranges) |
| Electrode Material | High-Purity Copper |
| Inter-Electrode Spacing | 10 mm |
| Powder Compaction Cylinder ID | 16 mm (optional 30 mm) |
| Stroke | 50 mm |
| Loading Capacity | 10 kN |
| Loading Control | Stepper-Motor-Driven Automatic Constant-Load Application |
| Force & Pressure Display | Real-Time Digital Readout |
| Sample Height Measurement | Integrated Linear Encoder |
| Data Output | Volume Resistivity (Ω·cm), Resistance (Ω), Applied Pressure (MPa), Compaction Time (s) |
| Interface | 7-inch Capacitive Touchscreen HMI |
| Data Export | USB Storage |
| Thermal Drift Stability | <0.05% per hour |
| Measurement Repeatability | ±0.3% at fixed density and temperature |
| Brand | ZKWN |
|---|---|
| Origin | Beijing, China |
| Model | YSRB-300* |
| Instrument Type | Electromechanical |
| Max Test Load | 10 kN |
| Max Plunger Travel | 180 mm |
| Specimen Dimensions | 50×50×50 mm or 40×40×20 mm |
| Overall Dimensions | 500×500×500 mm (H×W×D) / 400×400×200 mm (H×W×D) |
| Net Weight | 50 kg |
| Heating Method | Forced-air oven |
| Temperature Range | Ambient to 300 °C |
| Temp. Stability | ±2 °C |
| Temp. Ramp Rates | 50±3 °C/h or 10±2 °C/12 min |
| Temp. Resolution | 0.1 °C |
| Deformation Resolution | 0.002 mm |
| Loading Configuration | Three independent test stations (compression via lever-arm mechanical amplification 1:32 |
| Recommended Load Range | 0–1 MPa |
| Heating Chamber Volume | 350×400×400 mm (L×W×H) |
| Compliance | GB/T 20672–2006, DIN 53424 |
| Brand | ZKWN |
|---|---|
| Origin | Beijing, China |
| Model | ZKDZY-I |
| Temperature Range | 200 °C |
| Heating Rate | 80 °C/min |
| Temperature Accuracy | ±1 °C |
| Stroke/Displacement Range | 1 mm |
| Measurement Resolution | 0.01 mm |
| Atmosphere Control | 12 configurable gas channels |
| Rated Power | 1 kW |
| Rated Voltage | 220 V / 50 Hz |
| Drum Internal Diameter | Φ68 mm |
| Drum Internal Height | 120 mm |
| Steel Ball Diameter | 6 mm |
| Tumbling Speed | 90 rpm |
| Programmable Tumbling Duration | Yes |
| Overall Dimensions (L×W×H) | 700 × 640 × 690 mm |
| Net Weight | 50 kg |
| Brand | ZKWN |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZKPMLQ-500C |
| Drop Height | 460 mm |
| Max Sample Weight | 75 g |
| Max Sample Dimensions | 100 × 100 × 100 mm |
| Impact Surface Diameter | 50 mm |
| Compliance | GB/T 6670–2008, ISO 8307, ASTM D3574, GB/T 10652–2001 |
| Brand | ZKWN |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZKPMLQ-500V |
| Drop Height | 80 mm |
| Max Sample Weight | 75 g |
| Max Sample Dimensions | 50 × 60 × 70 mm |
| Impact Surface Diameter | 56 mm |
| Compliance | GB/T 6670–2008, ISO 8307, ASTM D3574, GB/T 10652–2001 |