Purification Equipment
Filter
Showing 811–840 of 1249 results
| Brand | Ontech |
|---|---|
| Origin | Beijing, China |
| Model | Ontech880 ODS |
| Cryotrap Temperature Range | −190 °C to 300 °C |
| Preconcentration Factor | >1000× |
| Automated Sampling | Yes |
| Regulatory Compliance | HJ 759–2023, HJ 1078–2019 |
| Brand | Ontech |
|---|---|
| Origin | Guangdong, China |
| Model | Ontech880 |
| Cryotrap Temperature Range | –190 °C to 300 °C |
| Pre-concentration Factor | >1000× |
| Automated Sampling Support | Yes |
| Regulatory Compliance | HJ 759–2023, HJ 1078–2019 |
| Brand | Ontech |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Ontech930 |
| Pricing | Available Upon Request |
| Brand | ORGANO |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PR-FP-0120a-UT1 |
| Purified Water Grade | ASTM Type I / ISO 3696 Grade 1 |
| Resistivity | 18.2 MΩ·cm @ 25°C |
| Heavy Metals & Soluble Silica | <3 ng/L (Detection Limit) |
| TOC | Real-time online measurement, <5 ppb typical |
| Endotoxins | <0.001 EU/mL |
| Particles (>0.1 µm) | <1 particle/mL |
| Flow Rate | 0.016–2 L/min (via dedicated dispensing arm) |
| Daily Output Capacity | ≥45 L |
| Feed Water | Municipal tap water (pre-treated) |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | 11801 |
| Heating Method | Dry-Block Heating |
| Temperature Range | 40–130 °C |
| Temperature Uniformity | ±0.5 °C |
| Sample Capacity | 96 positions |
| Gas Flow Rate | 0–25 LPM |
| Needle Material | Stainless Steel (2" × 19 gauge) |
| Compatible Formats | 96-well plates, 8-tube strips, deep-well plates |
| Construction | Laboratory-grade corrosion-resistant materials (optional acid-resistant coating available) |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | Microvap Series (e.g., 11801, 11803) |
| Heating Method | Dry-block heating |
| Temperature Range | 40–130 °C |
| Temperature Stability | ±0.5 °C |
| Sample Format | 96-well microtiter plates |
| Gas Flow Rate | 0–30 LPM |
| Heating Power | 400 W |
| Certifications | UL Listed |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | MULTIVAP Series |
| Heating Method | Water Bath |
| Temperature Range | Up to 99 °C |
| Temperature Stability | ±0.5 °C |
| Sample Tube Diameter | 10–22 mm |
| Gas Flow Rate | 0–30 L/min |
| Sample Positions | 100 |
| Heating Power | 1100 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP 45-Position |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 90 °C |
| Temperature Stability | ±0.5 °C |
| Tube Outer Diameter Range | 10–19 mm |
| Tube Inner Diameter Range | 10–29 mm |
| Gas Flow Rate | 0–30 LPM |
| Sample Capacity | 45 positions |
| Heating Power | 1400 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP |
| Heating Method | Water Bath |
| Temperature Control Range | Ambient to 90 °C |
| Temperature Uniformity | ±2 °C (6–24 positions), ±0.5 °C (34 & 45 positions) |
| Sample Capacity | 6–45 positions |
| Tube Diameter Compatibility | 10–29 mm (standard), up to 56 mm (optional) |
| Gas Flow Rate | 0–10 L/min (6/12/24), 0–20 L/min (34), 0–30 L/min (45) |
| Input Gas Pressure | 30–150 psig |
| Output Gas Pressure | 0–30 psig |
| Nitrogen Consumption | ~330 mL/min per sample |
| Heating Power | 500–1400 W |
| Construction | Laboratory-grade stainless steel |
| Optional Configurations | Acid-resistant coating (RT), Dry-Block with aluminum beads (DA), PTFE-coated needles (T), Extended 6-inch needles (6), Pasteur pipette adapter (P), Heater-free configuration (O) |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP Series |
| Heating Method | Water Bath |
| Temperature Range | 0–80 °C |
| Temperature Uniformity | ±2 °C |
| Sample Tube Diameter Capacity | Up to 29 mm |
| Gas Flow Rate | 0–10 L/min |
| Throughput Options | 12-position or 24-position configurations |
| Heating Power | 500–800 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP (12-Position and 24-Position) |
| Heating Method | Water Bath |
| Temperature Range | 0–80 °C |
| Temperature Stability | ±2 °C |
| Tube Diameter Capacity | Up to 29 mm |
| Gas Flow Rate | 0–10 L/min |
| Sample Positions | 12 or 24 |
| Heating Power | 500–800 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Heating Method | Water Bath |
| Temperature Range | 0–80 °C |
| Temperature Uniformity | ±2 °C |
| Sample Capacity | 12 or 24 positions |
| Tube Diameter Compatibility | Up to 29 mm |
| Gas Flow Rate | 0–10 L/min (adjustable per channel) |
| Heating Power | 500–800 W |
| Solvent Recovery Efficiency | ~98% |
| Gas Consumption | ~330 mL/min per sample |
| Construction | Laboratory-grade stainless steel and chemically resistant materials |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-12 |
| Catalog No. | KL-11155-JG |
| Heating Method | Water Bath |
| Temperature Range | 30°C–90°C |
| Temperature Stability | ±2°C |
| Tube Diameter Capacity | 0–29 mm |
| Gas Flow Rate | 0–5 L/min (330 mL/min per position) |
| Sample Positions | 12 |
| Heating Power | 500 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-12 |
| Catalog No. | KL-11155 |
| Heating Method | Water Bath |
| Temperature Range | 30°C–90°C |
| Temperature Stability | ±2°C |
| Sample Capacity | 12 positions |
| Tube Diameter Compatibility | 0–29 mm |
| Gas Flow Rate | 0–5 L/min (330 mL/min per sample) |
| Heating Power | 500 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-12 |
| Heating Method | Water Bath |
| Temperature Range | Up to 99 °C |
| Temperature Uniformity | ±1 °C |
| Sample Capacity | 12 positions |
| Tube Diameter Compatibility | 10–30 mm |
| Gas Flow Rate | 0–10 L/min |
| Input Pressure | 30–150 psig |
| Output Pressure | 0–30 psig |
| Power Rating | 800 W |
| Nitrogen Consumption | 330 mL/min per sample |
| Dimensions (W×D×H) | 33 × 28 × 79 cm |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-20 Automated |
| Heating Method | Water Bath |
| Temperature Range | 30–100 °C |
| Temperature Stability | ±0.5 °C |
| Sample Capacity | 20 positions |
| Tube Diameter Compatibility | 10–30 mm (standard), optional 30–54 mm |
| Nitrogen Flow Rate | 0–20 L/min |
| Heating Power | 800 W |
| Pressure Input Range | 0–30 psig |
| Actuation | Pneumatic cylinder with regulated output (30–160 psig) |
| Needle Material | Stainless steel, 4 in × 19 gauge (102 mm × 19 ga) |
| Safety Features | High-temperature cutoff switch, acid-resistant coating (optional #RT), dual nitrogen filtration, circuit breaker, covered safety guard |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-24 |
| Catalog No. | KL-11250-JG |
| Heating Method | Water Bath |
| Temperature Range | 30°C to 90°C |
| Temperature Stability | ±2°C |
| Tube Diameter Compatibility | 10–29 mm |
| Gas Flow Rate | 0–10 LPM (330 mL/min per position) |
| Sample Capacity | 24 positions |
| Heating Power | 800 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-112/24 |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 99 °C |
| Temperature Stability | ±0.5 °C |
| Sample Capacity | 24 positions |
| Tube Diameter Compatibility | 10–29 mm |
| Gas Flow Rate | 0–15 L/min |
| Heating Power | 800 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-24 |
| Catalog No. | KL-11250 |
| Heating Method | Water Bath |
| Temperature Range | 30°C–90°C |
| Temperature Stability | ±2°C |
| Sample Tube Diameter | 10–29 mm |
| Gas Flow Rate | 0–10 LPM (330 mL/min per position) |
| Sample Capacity | 24 positions |
| Heating Power | 800 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-34 |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 99 °C |
| Temperature Stability | ±2 °C |
| Sample Capacity | 34 positions |
| Tube Diameter Compatibility | 10–30 mm |
| Gas Flow Rate | 330 mL/min per channel |
| Heating Power | 800 W |
| Needle | Stainless Steel, 4" × 19 gauge (replaceable) |
| Control | Individual needle valve per channel |
| Compliance | Designed for GLP-compliant sample prep workflows |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Product Line | N-EVAP / S-EVAP / MULTIVAP |
| Sample Capacity | 6–100 positions |
| Gas Medium | Nitrogen or compressed air |
| Heating Method | Precision water bath (S-EVAP: boiling solvent evaporation) |
| Solvent Recovery Rate | Up to 98% (S-EVAP model) |
| Gas Flow Control | Individual needle valve + flow meter (330 mL/min per sample) |
| Compatibility | Test tubes, centrifuge tubes, conical flasks |
| Construction | Laboratory-grade corrosion-resistant materials |
| Compliance | Designed for GLP-compliant sample preparation workflows in regulated environments |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-VEAP-45 |
| Heating Method | Water Bath |
| Temperature Range | Up to 99 °C |
| Temperature Stability | ±0.5 °C |
| Sample Tube Diameter | 10–30 mm |
| Gas Input Pressure | 30–150 psig |
| Sample Positions | 45 |
| Heating Power | 500 W |
| Gas Flow Rate | 0–10 L/min |
| Nitrogen Consumption | 330 mL/min per sample |
| Dimensions (W×D×H) | 33×28×79 cm |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | S-EVAP-RB Series Parallel Evaporator |
| Instrument Type | Automated Quantitative Concentrator |
| Temperature Range | 30–100 °C |
| Temperature Control Accuracy | ±2 °C |
| Solvent Bottle Capacity | 250 mL and 500 mL options |
| Safety Certifications | UL/cUL Listed |
| Compliance | ISO 14000-compatible operation |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | S1-N-EVAP |
| Pricing | Available Upon Request |
| Brand | Ottesens |
|---|---|
| Origin | Tianjin, China |
| Model | MTN-5800 / MTN-5800A |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 96 °C |
| Temperature Stability | ±0.2 °C |
| Tube Diameter Compatibility | 10–29 mm (standard) / 30–55 mm (optional) |
| Gas Flow Rate | 0–25 L/min |
| Sample Positions | 12 or 24 |
| Heating Power | 1000 W |
| Control Type | Manual (MTN-5800) / Motorized Vertical Adjustment (MTN-5800A) |
| Safety Features | Auto water-level cutoff, drain valve, overheat protection |
| Brand | Deepflow |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | CYR0G00002 |
| Pricing | Available Upon Request |
| Brand | Deepflow |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | CYR0G0T0S2 |
| Pricing | Available Upon Request |
| Brand | Deepflow |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Region of Origin | Domestic (China) |
| Model | CY0G0TNP2 |
| Pricing | Available Upon Request |
| Brand | Deepflow |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CYR0G000T3 |
| Pricing | Available Upon Request |
| Brand | BCT |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | P500 |
| Pricing | Available Upon Request |