Rubber & Plastic Industry Specialized Instruments
Filter
Showing 391–420 of 465 results
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TY-7009P |
| Screw Diameter | 21.7 mm |
| L/D Ratio | 40:1 |
| Main Drive Motor | 4 kW |
| Max Screw Speed | 600 rpm |
| Heating Power | ~3 kW |
| Total Installed Power | ~10 kW |
| Output Capacity | 2–5 kg/h (material-dependent) |
| Vacuum Pump | SK-0.15 water-ring type (0.75 kW) |
| Die | Dual-hole φ3.5 mm water-strand die |
| Control System | PLC-based with interlocked safety logic |
| Cooling | Soft-water circulation (30 L tank, 120 W pump) |
| Screw Material | W6Mo5Cr4V2 high-speed tool steel, HRC 62–64 |
| Barrel Material | Nitrided 38CrMoAlA steel |
| Torque Distribution Gearbox | Parallel triple-shaft design, imported bearings |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TYCD-Cr12MoV |
| Price | USD 280 (approx.) |
| Brand | TianYuan |
|---|---|
| Model | TYLX-A |
| Type | Shore A Hardness Tester |
| Standard Compliance | GB/T 531.1, GB/T 2411, HG/T 2489, JB 6148 |
| Indentor Tip Diameter | 1.25 mm ± 0.15 mm |
| Indentor Tip Radius (A-type) | 0.375 mm |
| Full Scale Range | 0–100 HA |
| Indentation Depth Range | 0–2.5 mm |
| Base Dimensions | 200 × 115 × 310 mm |
| Net Weight | 12 kg |
| Brand | Timepower |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TP 691 |
| Pricing | Upon Request |
| Measurement Principle | Microscopic Filtration & Manual Particle Counting |
| Detection Threshold | ≥5 µm (maximum dimension) |
| Microscope Magnification | 100× with Integrated Illumination |
| Contamination Rating Range | NAS 1638 Classes 4–12 |
| Dimensions | 410 mm × 310 mm × 230 mm |
| Weight | 6.4 kg |
| Compliance Standards | DL/T 432, GB/T 20082, ISO 4406, NAS 1638, GB/T 18854, ISO 11171, GJB 420B, GJB 380.4A |
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | 603HDTV, 303HDTV |
| Compliance Standards | ISO 75-1/2, ISO 306, ASTM D648, ASTM D1525 |
| Maximum Simultaneous Test Positions | 6 (603HDTV), 3 (303HDTV) |
| Oil Bath Stations | 6 (603HDTV), 3 (303HDTV) |
| Load Application | Pneumatic vertical loading with air-bearing guide ring |
| Displacement Resolution | 0.001 mm |
| Load Accuracy | Certified for 0.45 MPa (ISO 75) and 1.0 MPa / 5.0 MPa (ISO 306) |
| Cooling System | Integrated heat exchanger (603HDTV) |
| Software | Horizon HDV with SPC, audit trail, CFR 21 Part 11–ready configuration options |
| Data Export Formats | HTML, CSV, PDF |
| Password Protection | Dual-level authentication |
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | MP1200 |
| Heating Zones | 3-zone independent PID control with Pt100 sensors |
| Temperature Stability | ±0.1 °C |
| Temperature Uniformity | ±0.1 °C across furnace |
| Control Interface | 7-inch capacitive touchscreen |
| Data Interface | USB 2.0 |
| Die Release Mechanism | Drop-down die holder |
| Weight Loading | Manual or motorized weight lift option |
| Standard Die | 2.095 mm diameter × 8.000 mm length (ASTM D1238 / ISO 1133 compliant) |
| Sample Cutter | Optional manual or automatic |
| Mirror Viewport | Integrated stainless-steel mirror for real-time extrudate observation |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Tracking Index |
| Voltage Range | Up to 600 V DC/AC |
| Dropping Interval | 30 s ± 1 s |
| Droplet Volume | 20 mm³ ± 2 mm³ |
| Droplet Height | 35 mm (adjustable within 30–40 mm) |
| Electrode Force | 1 N (spring-loaded, calibrated) |
| Electrode Material | Platinum-tipped stainless steel |
| Sample Chamber | High-dielectric-strength insulated enclosure with hinged acrylic lid |
| Safety Interlock | Automatic circuit disconnection upon lid opening |
| Meters | 600 V full-scale voltmeter, 1 A full-scale ammeter |
| Control Panel | Start/Stop switch, main power switch, integrated timer |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | HC01-0101 |
| Power Supply | 24 V DC |
| Rated Power | 120 W |
| Rotational Speed Range | 120–3600 rpm |
| Dimensions (L×W×H) | 450 × 450 × 450 mm |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | RRC-1 |
| Price | USD 1,400 (approx.) |
| Base Web Width | 100 mm |
| Speed Range | 0.01–10 rpm |
| Linear Velocity Range | 0.13–52.44 mm/s |
| Drum Diameter Compatibility | 25–100 mm |
| Roller Height Adjustment | 0–24 mm |
| Max Power Consumption | 45 W |
| Supply Voltage | 24 V DC |
| Frame Material | PP Polypropylene |
| Roller & Mount | 304 Stainless Steel |
| Grounding Plate | Anodized Aluminum |
| Net Weight | 7.5 kg |
| Cable | 1 m, 5-pin aviation connector |
| Operating Temperature | 5–45 °C |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Model | SZPT-3P |
| Material | 316L stainless steel (needle body & seat), medical-grade polypropylene (Luer adapter) |
| Dead Volume | Outer-Middle layer: 1.4 mL |
| Middle-Inner layer | 2.0 mL |
| Inner layer | 0.2 mL |
| Weight | ~300 g |
| Configurable needle gauges | e.g., 13G+16G+20G, 13G+18G+25G, 15G+20G+25G |
| Includes | 1× modular needle seat, 3× triple-needle sets, 10× 1/16″ tubing fittings, 10× small O-rings, 4× large O-rings, 4× Luer-lock adapters, 1× dual-purpose wrench, 1× metal mounting bracket |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TES-1 |
| Price Range | USD 2,800 – 7,000 |
| High-Voltage Power Supply | 0–+30 kV (adjustable), optional −30 kV |
| Dual-Channel Syringe Pump | 100 µL/h – 7.62 L/h, supports 1–60 mL syringes |
| Needle Traverse Range | 0–150 mm |
| Needle Speed | 0–1000 ±1 mm/min |
| Collector Rotation Speed | 120–3000 ±20 rpm (bidirectional) |
| Standard Collector | Balanced Rotating Drum (Φ100 × L200 mm) |
| Overall Dimensions (w/o collector) | 471 × 455 × 518 mm |
| Weight (w/o collector) | 25 kg |
| Safety Features | Emergency Stop, Grounding Protection, Overvoltage/Overcurrent/Arc-Fault Protection |
| Power Supply | 220 V, 50 Hz |
| Rated Power | 60 W |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Model | TES-2 |
| Power Supply | ±30.0 kV (0.1 kV resolution) |
| Dual-Channel Syringe Pump | 100 µL/h – 7.62 L/h, max 60 mL syringe |
| Collector Speed | 0–600 ±1 rpm, reversible |
| Nozzle Traverse Range | 40–200 mm |
| Nozzle Travel Speed | 0–1000 ±1 mm/min |
| Tip-to-Collector Gap Adjustment | up to 180 mm |
| Temperature Control | RT–50 ±1.0 °C |
| Humidity Control | 20–80 ±3 %RH |
| Chamber Dimensions (w/d/h) | 833×466×995 mm (standalone), 833×466×1800 mm (with mobile base) |
| Weight | 110 kg (standalone), 125 kg (with base) |
| Total Power Consumption | 625 W |
| Safety Compliance | Integrated emergency stop, interlocked access door, full-system grounding, overtemperature protection, ESD-safe materials (PFA tubing, anti-static polymers, carbon-brush grounding rods) |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Model | TES-4 |
| Voltage Output | ±30 kV (standard), optional ±60 kV |
| Collector | 304 stainless steel roller, servo-driven, max. 3000 rpm |
| Syringe Pump | Dual-channel, 2–60 mL compatibility, high-voltage rated |
| Motion Control | X (280 mm, manual), Y (180 mm auto-reciprocating, up to 3000 mm/min), Z (100 mm, manual) |
| Environmental Control | PID-controlled heating (far-infrared), condensation dehumidification, thermal evaporation humidification |
| Safety | Emergency stop, grounded conductive structure, explosion-proof tempered glass viewport, anti-static floor mat, UV germicidal lamp, observation lamp |
| Compliance | Designed for GLP-compliant electrospinning R&D environments |
| Software | Proprietary PLC-based electrospinning OS with real-time environmental logging, parameter recall, and audit-ready operation history |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | WI22-0201 Octo-Configurable Kit |
| Price Range | USD 0.15 – 150.00 |
| Material | 316L Stainless Steel (Needles & Housing), Medical-Grade Polypropylene (Adapters) |
| Certifications | ISO 13485–compatible manufacturing environment |
| Pressure Test | Pre-shipped hydrostatic leak test at 0.6 MPa |
| Key | Brand: EUROTECH |
|---|---|
| Origin | Italy |
| Model | XTR60 |
| Type | Continuous Strip-to-Tube Welding & Sizing System |
| Configuration | Import (CE-compliant) |
| Distribution Status | Authorized Distributor |
| Key | Brand: TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TY-4068 |
| Quotation | Upon Request |
| Applied Standard | GB/T 9867, ISO 4649, DIN 53516 |
| Load on Specimen | 10 ± 0.2 N |
| Abrasion Distance | 20 m or 40 m |
| Roller Speed | 40 ± 1 rpm |
| Roller Diameter | 150 ± 0.2 mm |
| Specimen Diameter | 16 ± 0.2 mm |
| Overall Dimensions | 700 × 340 × 300 mm |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TY-4288 |
| Pricing | Upon Request |
| Worktable Width | 100 mm |
| Maximum Slice Thickness | 12 mm |
| Blade Dimensions (L×W×H) | 80 × 25 × 1 mm |
| Maximum Feed Thickness | 12 mm |
| Overall Dimensions (L×W×H) | 700 × 300 × 400 mm |
| Motor Power | 0.55 kW |
| Net Weight | 86 kg |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | TY-5006UA |
| Temperature Control Range | RT to 300 °C |
| Heating Rate Options | (120 ± 10) °C/h or (50 ± 5) °C/h |
| Temperature Resolution | 0.1 °C |
| Deformation Measurement Range | 0–1.5 mm |
| Deformation Accuracy | ±0.001 mm |
| Sample Support Span | 64 mm or 100 mm |
| Thermal Expansion Coefficient of Test Frame | < 0.005 mm/100 °C |
| Load Rod & Platter Mass | 68 g |
| Heating Power | 4 kW |
| Dimensions (W × D × H) | 540 × 520 × 970 mm |
| Cooling Method | Natural cooling above 150 °C |
| Bath Medium | Methyl silicone oil (kinematic viscosity ~200 cSt) or transformer oil |
| Test Stations | 3 independent stations |
| Standard Compliance | GB/T 1633, GB/T 1634.1–3, GB/T 8802, ISO 306:2013, ISO 75-1–3:2003, ASTM D1525, ASTM D648 |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TY-6004 |
| Price Range | USD 4,200 – 7,000 |
| Measuring Range | 0–200 Mooney Units (MU) |
| Accuracy | ±0.5 MU |
| Resolution | 0.1 MU |
| Temperature Range | Ambient to 200 °C |
| Temp. Stability | ±0.3 °C |
| Heating Rate | <20 min (RT to 150 °C) |
| Rotor Speed | 2.00 ± 0.02 rpm |
| Cavity Closure Force | 11.5 kN |
| Applied Pressure | 0.4 MPa |
| Power Supply | AC 220 V ±10%, 50/60 Hz |
| Power Consumption | 800 W |
| Dimensions (W×D×H) | 660 × 570 × 1300 mm |
| Net Weight | 260 kg |
| Rotor Material | Cr6WV Tool Steel |
| Data Interface | USB |
| Software Language Support | English, Simplified Chinese, Traditional Chinese, Russian |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TYMP-II |
| Speed Options | 11 m/s or 20 m/s (selectable) |
| Motor Speed | 1400 rpm or 2800 rpm |
| Grinding Wheel Specifications | G260APRI, 150 × 40 × 32 mm (32-grit and 80-grit options available) |
| Worktable Diameter | 160 × 44 mm |
| Center Height | 214 mm |
| Traverse Stroke | 20 mm |
| Sample Dimensions | Length > 260 mm, Width ≤ 34 mm, Thickness ≤ 8 mm |
| Overall Dimensions | 500 × 400 × 314 mm |
| Weight | 80 kg |
| Dust Extraction Port | Ø50 mm |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | TY6004 |
| Price Range | USD 4,200 – 7,000 (FOB China) |
| Measurement Range | 0–200 Mooney Units |
| Resolution | 0.1 MU |
| Accuracy | ±0.5 MU |
| Temperature Range | Ambient to 200 °C |
| Temp. Stability | ±0.5 °C |
| Rotor Speed | 2.00 ± 0.02 rpm |
| Applied Pressure | 0.5 MPa |
| Heating Rate | <5 min (RT to 100 °C) |
| Power Supply | AC 220 V, 50 Hz |
| Power Consumption | 800 W |
| Dimensions (W×D×H) | 660 × 570 × 1300 mm |
| Weight | 2160 kg |
| Rotor Material | Cr6WV tool steel |
| Data Interface | USB |
| Software Language Support | English, Simplified Chinese, Traditional Chinese, Russian |
| Brand | TYTESTER |
|---|---|
| Model | TY-6002A |
| Type | Oscillating Disc Vulcanizometer (ODV) |
| Origin | Jiangsu, China |
| Manufacturer | TianYuan Instrument Co., Ltd. |
| Torque Range | 0–15 N·m |
| Torque Resolution | 0.001 N·m |
| Temperature Range | RT to 200 °C |
| Temperature Accuracy | ≤ ±0.3 °C |
| Temperature Resolution | 0.01 °C |
| Oscillation Frequency | 1.7 Hz |
| Oscillation Amplitude | ±0.5° or ±1.0° |
| Cavity Material | Cr6WV Tool Steel |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Rated Power | 800 W |
| Dimensions (W×D×H) | 660 × 580 × 1300 mm |
| Weight | 260 kg |
| Compliance | GB/T 16584, ISO 6502, ASTM D5289 |
| Data Interface | USB |
| Control Interface | Dual-mode — Industrial Touchscreen + Windows-based PC Software (Windows 7+ compatible) |
| Brand | TYTESTER |
|---|---|
| Model | TYMP-II |
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Price Range | USD 1,400 – 2,100 |
| Wheel Linear Speed | 12 m/s |
| Coarse Wheel Specification | G260APRI 170×40×32 mm, 32-grit |
| Fine Wheel Specification | G260APRI 170×40×32 mm, 80-grit |
| Worktable Diameter | 160×44 mm |
| Center Height | 214 mm |
| Grinding Stroke | 20 mm |
| Sample Dimensions (L×W×H) | >260 mm × ≤36 mm × ≤8 mm |
| Overall Dimensions | 500×400×314 mm |
| Weight | 80 kg |
| Brand | Wallace |
|---|---|
| Origin | United Kingdom |
| Model | P14 |
| Type | Rapid Plastometer for Uncured Natural Rubber |
| Compliance | GB/T 3517–2022, ASTM D926 (equivalent methodology), ISO 2007 (Plasticity of Raw Rubber) |
| Calibration | Semi-automatic 1 mm gap calibration, load calibration, temperature calibration |
| Data Output | Sample ID tagging, timestamped results, traceable test records |
| Operation Modes | Single-value, median, or mean reporting |
| Display | Real-time digital readout of deformation under standardized load and temperature |
| Key | Brand: Wickert |
|---|---|
| Origin | Germany |
| Model | WLP S Series |
| Compliance | GB/T 6038, ISO 2393, ASTM D3182 |
| Type | Laboratory-scale hydraulic平板 vulcanizer for rubber sample curing |
| Origin | Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | WKW-300 |
| Pricing | Available Upon Request |
| Temperature Range | Ambient to 300 °C |
| Temperature Accuracy | ±0.5 °C |
| Heating Rates | 5 ±0.5 °C/6 min (Method A), 12 ±1.0 °C/6 min (Method B) |
| HDT Deformation Range | 0–0.5 mm |
| Vicat Penetration Range | 0–1 mm |
| Dial Indicator Accuracy | ±0.005 mm |
| Vicat Needle | 3 mm length, cross-sectional area 1.000 ±0.015 mm² |
| HDT Probe Fillet Radius | 3.0 ±0.2 mm |
| Max HDT Load | 5 kgf (≈49.0 N) |
| Vicat Loads | GA = 10 N ±0.2 N, GB = 50 N ±1 N |
| Max Heating Power | ≤4000 W |
| Electrical Supply | 220 V, 50 Hz, 30 A |
| HDT Span Lengths | 64 mm and 100 mm |
| Accuracy Class | Class 1 |
| Cooling Options | Natural convection or water-cooled |
| Over-Temperature Protection | Programmable upper limit |
| Compatible Heat Transfer Medium | Methyl silicone oil (flash point ≥300 °C, kinematic viscosity ≈200 cSt) |
| Origin | Netherlands |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Xplore Micro Injection Molding System |
| Price | Upon Request |
| Origin | Netherlands |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DSM Xplore |
| Price | €150,000 |
| Brand | Xplore (Netherlands) |
|---|---|
| Origin | Netherlands |
| Model | Film Cast Device |
| Dimensions | 43 × 16 × 25 cm |
| Weight | ~10 kg |
| Film Die Width | 35 mm |
| Film Thickness Range | 0.1–0.6 mm (down to 5 µm achievable) |
| Web Speed | 100–5000 mm/min (adjustable in 1 mm/min increments) |
| Torque Control Resolution | 1 N·mm per step (230 steps total) |
| Feeding System | Cooled hopper + continuous feed screw |
| Integrated Air Knife | Effective width up to 30–35 mm |
| Control Unit | Integrated touchscreen controller |
| Power Supply | 220–240 V AC |
| Brand | Xplore |
|---|---|
| Origin | Netherlands |
| Model | XM-12 |
| Max Shot Volume | 12 mL |
| Max Operating Temperature | 400 °C |
| Heating Zones | 2 |
| Max Injection Force | 18,000 N |
| Nozzle Heat-up Time (2–240 °C) | < 8 min |
| Dimensions (W×D×H) | 84 × 33 × 32 cm |
| Weight | 50 kg |
| Mold Temperature Control Range | Below ambient to 400 °C |
| Power Supply | 208–240 V AC |