Sensors
Filter
Showing 151–180 of 194 results
| Brand | Lake Shore |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | Lake Shore TC Series |
| Pricing | Upon Request |
| Brand | Lanjing |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Producer |
| Origin Category | Domestic (China) |
| Model | LJ-DJ1S |
| Price | USD 850 (FOB Qingdao) |
| Measurement Principle | Dual-Beam UV254 Absorption + Nephelometric Turbidity |
| COD Range | 0–500 mg/L (customizable to 0–200 mg/L) |
| COD Resolution | 0.1 mg/L |
| COD Accuracy | ±5% of reading |
| Turbidity Range | 0–400 NTU (customizable to 0–200 NTU) |
| Turbidity Resolution | 0.1 NTU |
| Temperature Range | 0–50 °C |
| Temp. Accuracy | ±0.3 °C |
| Temp. Compensation | Automatic |
| Auto-Cleaning | Integrated mechanical wiper with programmable cycle control |
| Power Supply | DC 12–24 V |
| Power Consumption | 0.7 W |
| Output | RS-485 (Modbus RTU protocol) |
| Enclosure Material | ABS housing + 316L stainless steel wetted parts |
| Protection Rating | IP68 |
| Installation | Submersible, 3/4" NPT thread |
| Cable Length | 5 m (5-conductor shielded) |
| Storage Temperature | −5 to +65 °C |
| Calibration | Two-point (zero & span) for both COD and turbidity channels |
| Dimensions | See technical drawing (L×W×H: 185 × 62 × 62 mm) |
| Compliance | Designed per ISO 7027 (turbidity), ASTM D5540 & EPA 415.3 (UV254-based organic carbon estimation), CE-marked for EMC and LVD |
| Brand | LI-COR |
|---|---|
| Origin | USA |
| Model | LI-550 |
| Dimensions | 9.1 cm × 9.1 cm × 5.2 cm |
| Measurement Path Length | 35 mm |
| Weight | ≤50 g |
| Power Supply | 5–32 VDC @ 320 mW |
| Output Interfaces | RS-232 (LI-550), RS-232/RS-422/UART-3V (LI-550P) |
| Sampling Frequencies | 1, 2, 5, 10, 20, 40 Hz |
| Ultrasonic Frequency | 60 kHz |
| Wind Speed Range | 0–50 m/s |
| Wind Speed Resolution | 0.01 m/s |
| Wind Speed Accuracy | ±0.2 m/s (0–10 m/s), ±2% (11–30 m/s), ±4% (31–50 m/s) |
| Wind Direction (u/v) | 0–359°, Resolution: 1°, Accuracy: ±1° |
| Vertical Wind Component (w) Range | ±15° |
| Temperature Range | −20 to +72 °C, Resolution: 0.01 °C, Accuracy: ±2.0 °C |
| Relative Humidity Range | 0–100 %RH, Resolution: 0.1 %RH, Accuracy: ±3 %RH |
| Barometric Pressure Range | 50–115 kPa, Resolution: 0.1 kPa, Accuracy: ±1.0 kPa |
| 3D Accelerometer Range | ±2 g (u/v/w), Tilt (Pitch/Roll): ±90° |
| Magnetometer Range | ±50 Gauss (u/v/w), Heading Accuracy: ±5° |
| Dew Point & Air Density | Computed from measured T, RH, and P |
| Brand | MEAS |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | D-Series |
| Pricing | Upon Request |
| IP Rating | IP67 |
| Output Options | Analog (0–5 V / 4–20 mA), Digital (RS232/RS485), Switch Output |
| Measurement Ranges | ±5°, ±15°, ±30° |
| Resolution | 0.001° |
| Accuracy (Digital/Analog, typical at 25°C) | ±0.04° |
| Accuracy (Digital/Analog, full temp range −40°C to +85°C) | ±0.15° (±0.3° for ±15° range, ±0.8° for ±30° range) |
| Temperature Drift | 0.06% FS/°C |
| Bandwidth | 23 Hz |
| Noise Density | 0.001° RMS |
| Supply Voltage | 10–30 VDC |
| Supply Current | 30–40 mA |
| Operating Temperature | −40°C to +85°C |
| Storage Temperature | −40°C to +85°C |
| Dimensions (W × D × H) | 84 × 70 × 46 mm |
| Weight | 290 g |
| EMC Compliance | EN 61000-6-2 / EN 61000-6-4 |
| Shock & Vibration | MIL-STD-810G compliant |
| Certifications | CE, RoHS |
| Brand | METER |
|---|---|
| Origin | USA |
| Model | SO-431 |
| Measurement Principle | Galvanic (Electrochemical) |
| Output Signal | Analog mV (O₂ concentration proportional) |
| Range | 0–30% O₂ |
| Repeatability | < 0.1% (at 20.95% O₂) |
| Nonlinearity | < 1% |
| Long-term Drift | 5% per year (0.6 mV/year) |
| O₂ Consumption | 0.1 μmol/day (at 20.95% O₂, 23°C) |
| Response Time (t₉₀) | 15 s |
| Operating Temperature | –20 to +60 °C |
| Relative Humidity | 0–100% RH (non-condensing) |
| Pressure Range | 60–114 kPa |
| Excitation Voltage (Thermistor) | 2.5 V DC |
| Heater Supply | 12 V DC |
| Heater Power | 74 mW |
| Thermistor Current | ≤0.1 mA @ 70 °C |
| Quiescent Current | 0.6 mA |
| Active Measurement Current | 1.3 mA |
| Sensitivity | 10–15 mV at 20.95% O₂ (sea level, 101.3 kPa) |
| Zero Output | < 0.5 mV |
| Housing Material | Polypropylene |
| Diffusion Cavity | Integrated micro-chamber for gas equilibration |
| Cable Length | 5 m (extendable) |
| Dimensions | Ø32 mm × 68 mm |
| Weight | 175 g (incl. cable) |
| Compatible Data Loggers | METER EM60 Series, ZL6 Series, ZSC |
| Software Integration | ZENTRA Cloud platform with auto-recognition and remote data access |
| Brand | Micro-Hybrid |
|---|---|
| Origin | Germany |
| Model | INC5502D |
| Measurement Range | Longitudinal (Roll): ±180° (configurable to 0°–360°) |
| Lateral (Pitch) | ±85° (configurable to 95°–265°) |
| Resolution | 0.01° |
| Sampling Rate | 200 Hz |
| Supply Voltage | 9–32 V DC |
| Protection Rating | IP67 / IP69K |
| Weight | ~120 g |
| Output Interfaces | Analog (I/U), CANopen, SAE J1939 |
| Brand | MEAS |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | NS-V Series |
| Output Options | Analog Voltage (±2 V) or Current (4–20 mA) |
| Measuring Range | ±5° to ±45° |
| Resolution | 0.001° (typ.) |
| Accuracy | ±0.1° to ±0.5° (0–70°C) |
| Zero & Sensitivity Temp. Stability | ±0.1° and ±0.3° (0–50°C) |
| Enclosure | Aluminum, IP65 |
| Electrical Interface | 7-pin M8 connector |
| Supply Voltage | 12–24 VDC |
| Supply Current | ≤30 mA |
| Operating Temp. | −40°C to +85°C (storage), 0°C to +70°C (operation) |
| Dimensions | 90 × 60 × 45.5 mm |
| Weight | 300–320 g |
| Brand | MEAS (York Instrument) |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | NS15/CAN |
| Pricing | Upon Request |
| Brand | -- |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | QA-3000 |
| Price | Upon Request |
| Input Range | ±60 g |
| Bias | <4 mg |
| One-Year Composite Repeatability | <40 µg (QA3000-030), <80 µg (QA3000-020), <125 µg (QA3000-010) |
| Temperature Sensitivity | <15 µg/°C (QA3000-030 & QA3000-020), <25 µg/°C (QA3000-010) |
| Scale Factor | 1.20–1.46 mA/g |
| Axis Misalignment | <1000 µrad (QA3000-030 & QA3000-020), <1500 µrad (QA3000-010) |
| Vibration Rectification | <10 µg/°rms (50–500 Hz), <35 µg/°rms (500–2000 Hz) |
| Intrinsic Noise | <7 µg/rms (0–10 Hz), <70 µg/rms (10–500 Hz), <1500 µg/rms (500–10,000 Hz) |
| Operating Temperature Range | –28 to +78 °C (QA3000-030), –55 to +85 °C (QA3000-020 & QA3000-010) |
| Shock Resistance | 100 g (QA3000-030), 150 g (QA3000-020 & QA3000-010) |
| Vibration Rating | 15 g peak sine (20–2000 Hz) |
| Resolution/Threshold | <1 µg |
| Bandwidth | >300 Hz |
| Thermal Modeling | Yes |
| Quiescent Current | <16 mA per supply |
| Quiescent Power | <480 mW @ ±15 VDC |
| Electrical Interface | Voltage Self-Test, Current Self-Test, Temp Sensor, –10 VDC Output, Power/Signal Ground |
| Input Voltage | ±13 to ±28 VDC |
| Weight | 7 g ±4 g |
| Diameter Below Mounting Surface | ≤1.005 in |
| Height (Bottom to Mounting Surface) | ≤0.585 in |
| Case Material | 300 Series Stainless Steel |
| Brand | RainWise |
|---|---|
| Origin | USA |
| Model | BAROP |
| Measurement Range | 300–1100 mbar |
| Resolution | 0.2 mbar |
| Accuracy | ±1.5 mbar |
| Long-Term Stability | ±2.5 mbar per 6 months |
| Operating Temperature Range | −40 °C to +60 °C |
| Brand | -- |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | General Distributor |
| Model | YK100510 |
| Pricing | Upon Request |
| Brand | Schaevitz |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GCA/GCD Series |
| Price | Upon Request |
| Measurement Range | ±0.050 in to ±2.00 in |
| Compliance | CE (DC models) |
| Construction | Fully Welded Hermetic Seal |
| Connector | MS-Type Circular Connector |
| Electronics Encapsulation | Hermetically Sealed |
| Calibration | NIST-Traceable Certificate Provided per Unit |
| Compatibility | Fully Compatible with All Schaevitz Signal Conditioners |
| Tip Options | Custom Contact Probes Available |
| Brand | Schaevitz |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | R120LC OEM |
| Pricing | Available Upon Request |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SI-F80R |
| Pricing | Available Upon Request |
| Brand | Sinotest |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | CLY Series Dynamic Spoke-Type Tension & Compression Load Cell |
| Price Range | USD 420 – 690 |
| Rated Capacity Range | 10 kN to 5000 kN |
| Construction | Full Steel Monolithic Body |
| Sealing Rating | IP66 / IP68 |
| Output Configuration | 4-Wire Wheatstone Bridge |
| Lateral Load Resistance | High |
| Stability | Long-Term Drift < ±0.02 %FS/year (typical) |
| Operating Temperature | −20 °C to +85 °C |
| Compensated Temperature Range | 10 °C to 40 °C |
| Brand | Sinotest |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Classification | Domestic |
| Model | CLY Series Spoke-Type Tension & Compression Load Cell |
| Price Range | USD 420 – 690 |
| Rated Capacity Range | 5 kN to 3000 kN |
| Construction | Monolithic Steel Body |
| Height Profile | Low-Profile Design |
| Lateral Load Resistance | High |
| Sealing Rating | IP66 / IP68 |
| Output Configuration | 4-Wire Wheatstone Bridge |
| Brand | SINOTEST |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | CNY-81 |
| Torque Range | 50 N·m to 2000 kN·m |
| Accuracy Classes | ±0.02% FS, ±0.05% FS, ±0.1% FS |
| Output Sensitivity | 1.5–2.0 mV/V |
| Nonlinearity | ≤±0.03% FS / ≤±0.05% FS / ≤±0.1% FS |
| Hysteresis | ≤±0.03% FS / ≤±0.05% FS / ≤±0.1% FS |
| Repeatability | ≤±0.03% FS / ≤±0.05% FS / ≤±0.1% FS |
| Creep (30 min) | ≤±0.03% FS / ≤±0.05% FS / ≤±0.1% FS |
| Zero Temperature Effect | ≤±0.03% FS/°C / ≤±0.05% FS/°C |
| Output Temperature Effect | ≤±0.03% FS/°C / ≤±0.05% FS/°C |
| Safe Load Limit | 120% FS |
| Nominal Bridge Resistance | 350 Ω |
| Recommended Excitation Voltage | ≤12 V DC |
| Maximum Excitation Voltage | ≤15 V DC |
| Zero Balance | ≤±1.0% FS |
| Insulation Resistance | ≥500 MΩ |
| Brand | SmartGas |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | C2H4 |
| Output Signals | 4–20 mA / 0–20 mA analog, 0–1 V / 0–2.5 V analog, RS-485 digital interface |
| Housing | Robust industrial enclosure |
| Connection | Flexible tubing interface |
| Technology | Non-dispersive infrared (NDIR) detection |
| Brand | SmartGas |
|---|---|
| Origin | Germany |
| Supplier Type | Authorized Distributor |
| Import Status | Imported |
| Model | Custom OEM/ODM Available |
| Pricing | Upon Request |
| Brand | SmartGas |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | H2 |
| Pricing | Available Upon Request |
| Detection Principle | Electrochemical (H₂-Specific) |
| Operating Temperature | -20°C to +80°C |
| Humidity Range | 5–95% RH (non-condensing) |
| H₂ Measurement Range | 0.2–4.0% vol in air |
| Supply Voltage | 12–24 VDC |
| Output Signal | 1–4.5 VDC (linear, 50 mA max load) |
| Fault Output | 0.0–0.75 VDC (low-fault) / 5.0 VDC (high-fault) |
| Power Consumption | 0.2–0.3 A |
| Response Time (T90) | ≤5 s |
| Recovery Time (T10) | ≤5 s |
| Cross-Sensitivity | Negligible to CO₂, CH₄, CO, and VOCs |
| Brand | SmartGas |
|---|---|
| Origin | Germany |
| Model | SM-CDT |
| Measurement Principle | Non-Dispersive Infrared (NDIR) |
| Detection Range | 0–5000 ppm CO₂ |
| Accuracy | ±2% of reading |
| Output Options | Modbus RTU (RS-485), 4–20 mA, 0–1 V / 0–2.5 V |
| Dual-Wavelength Compensation | Yes |
| Temperature Compensation | Integrated |
| Expected Service Life | ≥10 years |
| Power Supply | 12–24 VDC |
| Enclosure Rating | IP65 (for SMF/SMP variants) |
| Compliance | CE, RoHS, EMC Directive 2014/30/EU |
| Operating Temperature | –10 to +50 °C |
| Humidity Range | 0–95% RH (non-condensing) |
| Brand | SmartGas |
|---|---|
| Origin | Germany |
| Model | SM-R134A |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Measurement Range | 0–2000 ppm |
| LOD | 2 ppm |
| Accuracy | ±2% of full scale (±40 ppm) |
| Resolution | 2 ppm |
| Repeatability | ±0.5% of reading |
| Output Options | 4–20 mA / 0–20 mA / 0–1 V / 0–2.5 V / RS485 (Modbus RTU) |
| Operating Temperature | -20 °C to +50 °C |
| Enclosure Rating | IP65 (SM/SMC variants) or IP67 (SMF/SMP variants) |
| Lifetime | ≥10 years |
| Cross-Sensitivity | Negligible to H₂O, CO₂, ethanol, and common background gases |
| Compensation | Dual-wavelength optical referencing with integrated temperature compensation |
| Brand | SmartGas |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SO2F2 |
| Pricing | Available Upon Request |
| Brand | SmartGas |
|---|---|
| Origin | Germany |
| Model | SO2 |
| Type | NDIR Infrared Gas Sensor |
| Compliance | CE, RoHS, ATEX optional |
| Output Signal | 4–20 mA / 0–10 V / Modbus RTU (RS-485) |
| Operating Temperature | −20 °C to +50 °C |
| Enclosure Rating | IP65 |
| Response Time (T90) | < 30 s |
| Zero Drift | < 2 % FS/year |
| Span Drift | < 2 % FS/year |
| Cross-Sensitivity | < 1 % to CO₂, NO₂, H₂S, CH₄ |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (PRC) |
| Pricing | Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TO2 |
| Price Range | USD 700 – 1,400 |
| Brand | -- |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | 4420 Series L-Type |
| Pricing | Upon Request |
| Brand | -- |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | 4380 Series L-Type |
| Pricing | Upon Request |
| Dimensions (in/mm) | 2.86 × 6.36 in (72.64 × 162.54 mm) |
| Mass | 0.35 lb (0.159 kg) |
| Max Calibrated Equivalent Airspeed | 450 knots |
| Heating | Integrated heater for total pressure port |
| Aircraft Compatibility | Fixed-wing aircraft, rotary-wing aircraft, UAVs |
| Mechanical Interface | Requires AN5812 and AN5814 fittings |
| Documentation | CAD models and dimensional/technical specification PDF available |
| Brand | UGT |
|---|---|
| Origin | Germany |
| Model | UMP-2 |
| Power Supply | 6–24 V DC |
| Current Consumption | 60 mA |
| Volumetric Water Content Range | 0–100 %vol |
| Accuracy (VWC) | ±2 %vol |
| Resolution (VWC) | 0.1 %vol |
| EC Range | 0.001–5 mS/cm (up to 40 mS/cm at reduced resolution) |
| EC Accuracy | ±1 % |
| Temperature Range | −40 to +60 °C |
| Temperature Accuracy | ±0.5 °C |
| Temperature Resolution | 0.01 °C |
| Output Signals | Three analog outputs (0–1 V for temperature, EC, and VWC respectively) + RS485 digital interface |
| Connector | M12 with 1.5 m integrated cable |
| Enclosure | Fully potted, IP68-rated |
| Installation | Direct burial or horizontal embedding |
| Brand | — |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Vehicle Tilt Alarm Sensor |
| Pricing | Upon Request |