- All
- Favorite
- Popular
- Most rated
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | D25-35 |
| Screw Diameter | 25–35 mm |
| Maximum Web Width | 500 mm |
| Film Thickness Range | 0.1–8 mm |
| Cooling Roll Configuration | Dual or Triple (Vertical, Horizontal, or Tilt-Adjustable) |
| Downstream Equipment | Winder, Slitter, Chill Roll Table, Edge Trimmer |
| Compatible Polymers | Polyolefins, PS, ABS, PET, PC, PMMA |
| Screw Exchange System | Rear-Access Quick-Change Mechanism |
| Compliance | CE-marked, ISO 9001–certified manufacturing |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | E-LAB 22 |
| Price Range | USD 13,500 – 40,500 (FOB Italy) |
| Screw Diameter | 22 mm |
| Die Diameter Options | 30 mm |
| Film Width Capability | 200 mm (with flat film die) |
| Configuration | Co-rotating, intermeshing twin-screw |
| Drive Power | 7.5 kW (typical for E-LAB 22) |
| L/D Ratio | 40:1 (standard) |
| Throughput Range | 1–8 kg/h (depending on formulation and screw design) |
| Temperature Control Zones | 6 independent zones (±1 °C accuracy) |
| Material Contact Parts | Nitrided tool steel (X153CrMoV12) or optional corrosion-resistant alloy |
| Brand | EUROTECH |
|---|---|
| Origin | Italy |
| Model | XTR Series (with Vacuum Pump & Air-Cooled Strand Pelletizer) |
| Screw Diameter Options | 20 / 25 / 30 / 35 mm |
| Gearbox Design | Rear-Removable for Rapid Screw Extraction |
| Barrel | Bimetallic Construction |
| Screw | Special Surface-Coated Hardened Steel |
| Venting Configuration | Atmospheric or Vacuum-Connected (XTR-D Variant) |
| Application Focus | Polymer Processing, Recycled Material Compounding, Mineral-Filled Compound Extrusion |
| Brand | MicrOptik |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | E-Type |
| Price Range | USD 42,000 – 70,000 |
| Maximum Film Width | 1200 mm |
| Production Capacity | 400 kg/h |
| Layer Configuration | 1–7 layers |
| Primary Resins | Polyolefins (PP, PE), Barrier Polymers (EVOH, PA, PVDC) |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | XTR20 / XTR25 |
| Extruder Type | Single-Screw Cast Film Extruder |
| Die Material | Special Alloy Steel |
| Chill Roll Configuration | Single, Dual, or Triple Roll |
| Web Width Range | 100–500 mm |
| Optional Features | Unwind Unit for Extrusion Coating, In-Line Gel Detection System |
| Supply Type | Imported Equipment |
| Distributor Status | Authorized General Distributor |
| Brand | EUROTECH |
|---|---|
| Origin | Germany |
| Model | Pelletizing-20D |
| Screw Diameter | 20 mm |
| L/D Ratio | 25:1 |
| Max. Screw Speed | 150 rpm |
| Heating Zones | 4 (independent microprocessor-controlled) |
| Temperature Range | Ambient to 350 °C per zone |
| Strand Cooling | Water bath + forced-air cooling |
| Die Options | 3 mm and 4 mm round orifices |
| Feed Hopper | Equipped with material-level sensor and empty-feed alarm |
| Torque Monitoring | Real-time display with overload shutdown |
| Control Interface | TFT touchscreen panel with dedicated soft-keys for each heating zone |
| Screw Configuration | Three-zone design with dedicated mixing section (mixing length ratio: 4:1) |
| Safety Features | High/low temperature alarm, torque limit lockout, emergency stop |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | T-100 |
| Application | Thermoplastic Regranulation & Color Masterbatch Pelletizing |
| Gearbox | High-torque, low-noise helical gear reduction |
| Screw & Barrel | Nitrided and bimetallic-hardened surfaces |
| Exhaust Options | Vacuum venting or atmospheric vent port |
| Material Compatibility | PP, PE, PS, ABS, PA, PVC, PC, POM, EVA, LCP, PET, PMMA |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Extruder Screw Diameter Range | 35–120 mm |
| Maximum Web Width | 1200 mm |
| Thickness Range | 0.1–8 mm |
| Production Capacity | 400 kg/h |
| Roll Stand Max. Winding Diameter | 1000 mm |
| Calender Configuration | Triple-roll (vertical/horizontal/adjustable tilt) |
| Slitting Capability | Up to 8 mm thickness |
| Type | Single-screw extrusion line for monolayer & multilayer polymer films and sheets |
| Compliance | Designed per CE Machinery Directive 2006/42/EC, compliant with ISO 14001 & ISO 9001 manufacturing practices |
| Brand | EUROTECH |
|---|---|
| Origin | Italy |
| Model | Microex Cast |
| Screw Diameter | 17.5 mm |
| Film Width | 100 mm (max) |
| Thickness Range | 10–1000 µm |
| Output Capacity | 1 kg/h (max) |
| Layers | Single-layer |
| Drive Power | 3 kW |
| Control Interface | 7-inch Touchscreen HMI |
| Connectivity | LAN + USB data export |
| Optional | In-line gel detection system |
| Compatible Materials | HDPE, LDPE, LLDPE, PP, PA, PMMA, TPU, EVOH, EVA, Biopolymers |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | XTR20 |
| Screw Diameter | 20 mm |
| Length-to-Diameter Ratio (L/D) | 30:1 |
| Drive Motor | 3 kW |
| Temperature Control Zones | 2 |
| Configuration | Import |
| Distributor Type | Authorized Distributor |
| Price Range | USD 42,000 – 70,000 |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | D-20 |
| Screw Diameter | 20 mm |
| L/D Ratio | 30 |
| Max. Output | 15 kg/h (material-dependent) |
| Screw Speed Range | 0–180 rpm |
| Torque | 500 N·m |
| Motor Power | 3 kW |
| Die Width | 150 mm |
| Adjustable Die Gap | 1.5 mm |
| Chill Roll Surface Roughness | < 0.1 µm |
| Chill Roll Temperature Control Range | 20–180 °C |
| Temperature Stability | ±0.01 °C |
| Winding Speed | 0.1–10 m/min |
| Tension Control Range | up to 20 N |
| Overall Dimensions (Extruder) | 600 × 1200 × 450 mm |
| Weight (Extruder) | 300 kg |
| Dimensions (Chill & Winding Unit) | 720 × 450 × 860 mm |
| Weight (Chill & Winding Unit) | 480 kg |
| Chiller Capacity (at 0 °C) | 5 kW |
| Julabo Thermostat Temperature Range | –30 to +180 °C |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | D25–D35 |
| Price Range | USD 14,000 – 42,000 (FOB Italy) |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | 3D Printing Filament Extrusion Line |
| Application | Thermoplastic filament production for FDM/FFF 3D printing |
| Compliance | CE-marked, ISO 9001–certified manufacturing process |
| Configuration | Twin-screw co-rotating extruder system with vacuum venting, precision metering feeder, water-cooled haul-off, and inline diameter laser gauge |
| Key | Brand: EUROTECH |
|---|---|
| Origin | Italy |
| Model | XTR60 |
| Type | Continuous Strip-to-Tube Welding & Sizing System |
| Configuration | Import (CE-compliant) |
| Distribution Status | Authorized Distributor |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Type | Twin-Screw Extrusion-Based Granulation System |
| Model | D22 |
| Configuration Options | Vertical or Horizontal Layout |
| Downstream Units | Winder (for rolls) or Guillotine Cutter (for sheets) |
| Feed Compatibility | Thermoplastic polymers, masterbatches, filled compounds, and reactive blends |
| Optional Upstream Integration | E-lab twin-screw extruder (35 mm), 25 mm or 35 mm single-screw extruders, manual melt filter, gear pump, chill roll stack (2- or 3-roll) |
| Brand | Cometech |
|---|---|
| Origin | Taiwan |
| Model | QC-603 |
| Cutting Plate Area | 70 × 150 mm |
| Dimensions (W×D×H) | 42 × 42 × 75 cm |
| Weight | 65 kg |
| Compatible Materials | Rubber, Soft Plastics, Leather, Foam, Paper |
| Accessories | One Base Pad |
| Optional | Custom-Dimension Cutting Dies |
| Application | Preparation of Standard Test Specimens for Tensile, Tear, Elongation, and Aging Tests |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | E-C40 |
| Layers | 1–5 |
| Max. Web Width | 1200 mm |
| Min.–Max. Thickness | 0.01–8 mm |
| Application Scope | Lab-scale R&D and Pilot Production |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | E-Lab 30 |
| Screw Diameter | 30 mm |
| L/D Ratio | 30–48 |
| Drive System | High-Performance Gearmotor with Mechanical/Electromechanical Safety Coupling |
| Barrel Configuration | Modular, Water-Cooled Jacketed Sections |
| Feed Options | Gravimetric Main Feeder, Optional Side Feeder (Powder/Liquid), Vacuum Venting Port |
| Screw Design | Multi-Component, Interchangeable Elements on Multi-Threaded Shaft |
| Application Scope | Lab-Scale Polymer Compounding, Recycled Material Formulation, Additive Masterbatch Production |
| Brand | EUROTECH |
|---|---|
| Origin | Italy |
| Model | Microex SP |
| Type | Laboratory-Scale Melt Spinning System with Integrated Twin-Screw Microextruder |
| Application | Thermoplastic Polymer Fiber Development (PP, PA, PET) |
| Configuration | Benchtop, Modular, Vacuum-Ready, Air-Cooled Die Assembly |
| Compliance | CE Marked, ISO 9001–Certified Manufacturing |
| Brand | EUROTECH |
|---|---|
| Origin | Italy |
| Model | MicroEx CP Twin |
| Screw Diameter | 12 mm |
| L/D Ratio | 40:1 |
| Motor Power | 3 kW |
| Throughput (PE reference) | up to 1 kg/h |
| Pellet Size | 1–3 mm |
| Temperature Zones | 4 independent zones |
| Drive System | Brushless DC motor, 2.1 N·m torque, direct-coupled |
| Feeding | Volumetric feeder with stainless steel hopper and feed throat cooling |
| Barrel Cooling | Softened water circulation through transverse bores in rectangular barrel modules |
| Barrel & Screw Material | Wear-resistant alloy steel |
| Die Assembly | Interchangeable bronze nozzles, precision-calibrated |
| Granulator | Pneumatically actuated rubber-coated traction roller + hardened steel cutter (18 mm width), adjustable stationary knife |
| Control System | 7" HMI touchscreen with PID temperature control, real-time current/pressure/temperature monitoring, alarm logging, USB data export, LAN-ready for remote diagnostics |
| Compliance | Designed for GLP-compliant lab-scale polymer compounding and granulation |
| Brand | EUROTECH |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Minicast Coex |
| Price Range | USD 42,000 – 70,000 |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | D65 |
| Screw Diameter | 65 mm |
| L/D Ratio | 36–48 |
| Drive System | High-performance gearbox coupled to high-efficiency motor via mechanical or electromechanical safety coupling |
| Barrel Configuration | Modular barrel sections with integrated water-cooling circuits and cast-aluminum heating zones |
| Feed Options | Optional side feeders (powder/liquid) and vacuum venting ports |
| Screw Design | Multi-axis modular screw assembly with interchangeable elements for material-specific configuration |
| Category | Rubber & Plastic Industry Specialized Instruments — Twin-screw Extruders for Biopolymer Processing |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | Microex 3D |
| Screw Diameter | 16 mm |
| Configuration | Single-screw extruder with air-cooled filament die, capstan haul-off, and spooling unit |
| Optional Module | Strand pelletizer for compounding mode |
| Category | Laboratory-scale filament extrusion system for polymer R&D and additive manufacturing feedstock development |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Model | XTR50 |
| Screw Diameter | 50 mm |
| Configuration | Single-screw extruder with integrated positive-displacement gear pump |
| Base Type | High-base frame for multi-process compatibility (cast film, sheet, tubing, profile) |
| Barrel | Bimetallic, wear-resistant steel |
| Screw | Surface-hardened special alloy steel |
| Optional Configurations | XTR-WR (wear-resistant), XTR-D (vented) |
| Compliance | CE-marked, compliant with EU Machinery Directive 2006/42/EC and PED 2014/68/EU |
Show next