Stiffness Tester
Filter
Showing all 14 results
| Brand | Drick |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | DRK106 Horizontal |
| Price Range | USD 7,000 – 14,000 |
| Stiffness Measurement Range (Bending Force) | 15–300 mN |
| Resolution | 0.1 mN |
| Accuracy | ±0.6 mN (≤50 mN), ±1% (＞50 mN) |
| Repeatability | ≤1% |
| Bending Length Options | (50±0.1) mm, (25±0.1) mm, (10±0.1) mm |
| Bending Angle | 15°±0.3°, 90°±0.3° |
| Bending Rate | 200°±20°/min (adjustable) |
| Crease Stiffness Specimen Size | 38×36 mm |
| Sheet Stiffness Specimen Size | 70×38 mm |
| Operating Temperature | 20°C±10°C |
| Power Supply | AC 220 V±5%, 50 Hz, Grounded |
| Brand | Gurley |
|---|---|
| Origin | USA |
| Model | 4171 |
| Power Supply | 110/220 V, 50/60 Hz |
| Display | Digital (LCD) |
| Output Units | mg, sin θ (1.0–7.0), or mN·m (via conversion formula) |
| Sample Capacity | Flat specimens — L 25.4–114.3 mm, W 1.27–50.8 mm, T ≤ 6.35 mm |
| Angular Adjustment | 0°–180° in 15° increments |
| Interface | RS-232 (4171-ET variant) |
| Compliance | ASTM D747, ISO 2493, TAPPI T823, GB/T 22895 |
| Brand | Gurley |
|---|---|
| Origin | USA |
| Model | 4171 |
| Compliance | ASTM D743, TAPPI T820, ISO 2431 |
| Display | Digital (LCD) |
| Operation Mode | Semi-automatic |
| Interface | RS-232 (4171-ET variant) |
| Sample Clamping | Dual-mode — flat specimen clamp (max. thickness 6.35 mm, width 1.27–50.8 mm, length 25.4–114.3 mm) and tubular specimen holder (0°–180° rotational, 15° increments) |
| Force Range | Adjustable via 60 configurable combinations of specimen length, pendulum mass, and mass position |
| Readout Units | Scale units (1.0–7.0), mg-force, or convertible to mN·m (via standardized conversion formula) |
| Data Handling | 100-point memory, auto-averaging, programmable upper/lower limits with audible alert |
| Calibration | Built-in self-check function |
| Enclosure | Rugged carrying case included |
| Optional Accessories | Moisture electrodes (2E, 12E, 15E, 19E, 43E, 55E, 830, H3) |
| Brand | Hanatek |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | CBT1 |
| Price | USD 13,500 (FOB UK) |
| Compliance Standards | BS 6965-1:1988, BS 3748, ISO 2493, TAPPI T556, DIN 53121, SCAN P29 |
| Resolution | 0.1 g |
| Accuracy | ±0.1 g |
| Measurement Range | 0–450 gf |
| Power Supply | 110/240 V AC, 50/60 Hz |
| Dimensions (H×W×D) | 230 × 175 × 250 mm |
| Net Weight | 7.6 kg |
| Packaging Weight | 10 kg |
| Sample Preparation Tools | BS 6965–compliant dedicated crease sample cutter, universal sample cutter, label printer with custom interface cable and preloaded firmware |
| Brand | IDM |
|---|---|
| Origin | Australia |
| Model | C0039 |
| Measurement Range | 0–1000 gf |
| Resolution | 0.5 gf |
| Crease Bending Angle | 90° |
| Board Stiffness Bending Angle | 15° |
| Sample Dimensions (Board Stiffness) | 70 × 38 mm |
| Sample Dimensions (Crease Stiffness) | 38 × 36 mm |
| Test Duration | 15 s |
| Calibration Weight | 200 g |
| Compliance Standards | BS 6965, BS 3748, ISO 2493:1992 |
| Data Interface | RS232 |
| Power Supply | 220/240 V @ 50 Hz or 110 V @ 60 Hz (configurable at order) |
| Dimensions (H×W×D) | 140 × 275 × 150 mm |
| Weight | 5 kg |
| Brand | Jihengpin |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HP-DLT |
| Max. Test Load | 50 N |
| Load Resolution | 0.001 N |
| Force Accuracy | ±1% of reading |
| Displacement Resolution | 0.01 mm |
| Speed Range | 1–600 mm/min |
| Test Space (Compression) | 300 mm |
| Dimensions (W×D×H) | 540 × 280 × 1450 mm |
| Weight | ~70 kg |
| Power Supply | 200 V, 50 Hz |
| Operating Environment | 10–45 °C, 20–80% RH |
| Compliance | GB/T 5019.2–2009 |
| Display | Full Chinese LCD interface |
| Control Mode | Touch-key + optional PC-based software (USB/RS232) |
| Protection | Overload protection, mechanical limit switches |
| Accuracy Class | Class 1 (GB/T 228.1) |
| Brand | Jihengpin |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HP-DLT |
| Price Range | USD 1,400 – 4,200 |
| Max Test Force | 50 N (optional ranges available) |
| Force Resolution | 0.001 N |
| Force Accuracy | ±1% of reading |
| Displacement Resolution | 0.01 mm |
| Displacement Accuracy | ±1% |
| Speed Range | 1–600 mm/min (digital DC motor control) |
| Test Space | 300 mm |
| Dimensions (W×D×H) | 540 × 280 × 1450 mm |
| Weight | ~70 kg |
| Power Supply | 200 V, 50 Hz |
| Operating Environment | 10–45 °C, 20–80% RH |
| Compliance | GB/T 5019.2–2009 |
| Display | Full Chinese LCD interface |
| Control Mode | Touch-key + optional PC software (USB/RS232) |
| Brand | Shang Zun |
|---|---|
| Origin | Guangdong, China |
| Model | CS-06 Series |
| Testing Range | 0–1200 gf |
| Crease Angle | 90° (rounded crease option available on CS-06R and CS-06M) |
| Board Stiffness Angle | 15° |
| Sample Dimensions (Crease) | 38 × 36 mm |
| Sample Dimensions (Board) | 70 × 38 mm |
| Resolution | 0.1 gf |
| Test Duration | Adjustable 0–15 s |
| Standard Mass | 200 g |
| Interface | USB + RS-232 |
| Power Supply | 100–240 V AC, 50 Hz |
| Compliance | ISO 5628, TAPPI T 823, GB/T 22895 |
| Brand | SumSpring |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | BTY-10S |
| Price | Upon Request |
| Measurable Cup Diameter | 20–150 mm |
| Measurable Cup Height | 15–120 mm |
| Force Measurement Range | 0–20 N |
| Force Resolution | 0.01 N |
| Accuracy | ±1% of full scale |
| Dimensions (L×W×H) | 560 × 270 × 350 mm |
| Weight | ≤34 kg |
| Operating Temperature | 10–35 °C |
| Power Supply | 220 V, 50 Hz |
| Relative Humidity | ≤80%, non-condensing |
| Brand | Taber |
|---|---|
| Origin | USA |
| Model | 150-E |
| Measurement Range | 0–10,000 Taber Stiffness Units (g·cm) |
| Compliance | CE Marked |
| Power Supply | 115/230 VAC, 50/60 Hz |
| Display | 4×20 Vacuum Fluorescent Display |
| Data Storage | 1,000 readings with timestamp & user-defined labels |
| Interface | RS-232 serial port, parallel printer port |
| Test parameters programmable | deflection angle, direction, cycle count |
| Accuracy | ±1% full scale (factory calibrated) |
| Sample thickness range | 0.1–5.5 mm |
| Brand | TMI |
|---|---|
| Origin | USA |
| Model | 79-11-00 |
| Measurement Range | 0–399 gf |
| Display | 3-digit LCD |
| Creasing Angle | 90° |
| Stiffness Bend Angle | 15° |
| Readout Time | 15 s |
| Resolution & Accuracy | ±1.0 gf |
| Power Supply | 240 V, 50 Hz |
| Fuse | 500 mA |
| Dimensions (Instrument) | 235 mm (H) × 180 mm (L) × 320 mm (W) |
| Dimensions (Packed) | 670 mm (H) × 550 mm (L) × 520 mm (W) |
| Weight (Instrument) | 11 kg |
| Weight (Packed) | 14 kg |
| Includes | Precision cutting knife and calibration weights |
| Brand | TMI |
|---|---|
| Origin | USA |
| Model | 79-11-00 |
| Force Range | 0–399 gf |
| Display | 3-digit LCD |
| Crease Angle | 90° |
| Bend Angle (Stiffness) | 15° |
| Readout Time | 15 s |
| Resolution & Accuracy | ±1.0 gf |
| Power Supply | 240 V, 50 Hz |
| Fuse | 500 mA |
| Dimensions (Instrument) | 235 mm (H) × 180 mm (L) × 320 mm (W) |
| Dimensions (Packed) | 670 mm (H) × 550 mm (L) × 520 mm (W) |
| Weight (Instrument) | 11 kg |
| Weight (Packed) | 14 kg |
| Includes | Precision cutting blade and certified calibration weights |
| Brand | YueLian / PW |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | PW-6605 |
| Quotation | Available Upon Request |
| Measurement Range | Torque (0–500) mN·m, Force (0–10,000) mN |
| Accuracy | ±0.1% |
| Span Adjustment | 8 discrete spans (5, 10, 15, 20, 25, 30, 40, 50 mm) |
| Specimen Dimensions | Compatible with both legacy (38 × 70 mm) and updated standard (38 × 80 mm) |
| effective measurement length | 38 × 50 mm |
| Resolution | Force 0.01 mN, Angular 0.1° |
| Self-Calibration | Supported with included calibration weights and tools |
| Angular Velocity Control | 0.5–1000 °/min (adjustable) |
| Bending Duration | Programmable from 5–35 s |
| Bending Angle | Continuously adjustable from 1° to 92° |
| Interface | 5-inch or 7-inch capacitive touchscreen with hierarchical menu navigation |
| Sensor Interchangeability | Tool-free quick-swap sensor module |
| Thermal Printer | Integrated modular thermal printer |
| Overall Dimensions | 350 × 330 × 350 mm (W × D × H) |
| Optional PW-601 Precision Sampling Cutter | Specimen size 80 × 38 mm |
| blade material | Mo-V alloyed chromium steel, wire-EDM cut + CNC precision grinding + triple high-temp quenching |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | PW-6618 |
| Measurement Range | 0–10 N |
| Resolution | 0.01 N |
| Accuracy | ±1% FS |
| Repeatability | ≤1% FS |
| Cup Diameter Range | 30–150 mm |
| Cup Height Range | 15–120 mm |
| Test Speed | 50 ± 2.5 mm/min (adjustable from 1–200 mm/min) |
| Force Travel Distance | 9.5 ± 0.5 mm |
| Dimensions (L×W×H) | 380 × 260 × 290 mm |
| Net Weight | 18 kg |