Testing Machine
Filter
Showing 271–300 of 3402 results
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70 °C to +150 °C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Humidity Deviation | +2 % / –3 % RH |
| Cooling Rate | 1 °C/min |
| Heating Rate | 4 °C/min |
| Vibration Frequency Range | 1–5000 Hz |
| Max Acceleration | <20 g |
| Max Displacement (p-p) | 0–5 mm |
| Load Capacity | 100 kg |
| Vibration Axes | Vertical & Horizontal (Dual-Axis) |
| Waveform | Sine (Half/Full Cycle) |
| Power Supply | AC 220 V / 380 V, 50 Hz |
| Brand | OK Instruments |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–42,000 (varies by model) |
| Load Capacity | 10–100 kg |
| Table Dimensions | 20×20 to 80×65 cm |
| Acceleration Range | 150–15,000 m/s² |
| Pulse Duration | 0.5–30 ms |
| Waveform Options | Half-sine, Trapezoidal, Post-peak Sawtooth |
| Power Supply | AC 380 V ±5%, 50/60 Hz, 3-phase 5-wire |
| Brand | OKE Instruments |
|---|---|
| Origin | China (Domestically Manufactured, Designed for Global Compliance) |
| Manufacturer Type | OEM/ODM Manufacturer |
| Certification Readiness | CE, ISO 17025-Compatible Design |
| Price Range | USD 20,000–25,000 (FOB Shanghai) |
| Tabletop Dimensions | 450 × 450 mm or 500 × 500 mm |
| Adjustable Amplitude | 0–5 mm peak-to-peak |
| Frequency Range | 1–400 Hz / 1–2000 Hz / 1–5000 Hz (model-dependent) |
| Max Load Capacity | 150 kg |
| Acceleration Range | 0–20 g (rms or peak, configurable) |
| Waveform | Sine (half-wave, full-wave), programmable |
| Sweep Mode | Linear/logarithmic, bidirectional, user-defined start/stop frequency & dwell time |
| Programmable Steps | Up to 15 segments (frequency, amplitude, acceleration, duration per step) |
| Octave Rate | 0.01 Hz resolution, up to 15 octaves |
| Log Sweep Modes | Low→High, High→Low, Low→High→Low (cyclic) |
| Vibration Axes | Vertical (Y), Horizontal (X/Z), or Triaxial (X/Y/Z simultaneous or sequential) |
| Amplifier Power Output | 2.2 kW |
| Input Voltage | 220 V AC, 50 Hz |
| Max Current Draw | 10 A |
| Timing Resolution | 1-second programmable duration (up to 999 hours) |
| Control Interface | RS-232/USB/Ethernet |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| 冲击 Energy Range | 0–100,000 g·mm (0–980.7 J) |
| Peak Acceleration Capability | Up to 100,000 g (theoretical, dependent on mass & pulse duration) |
| Impact Velocity Range | 0–9.3 m/s |
| Table Surface Dimensions | 180 × 180 mm |
| Mass | 2,500 kg |
| Compliance | JESD22-B110, IEC 60068-2-27, ISO 13374-2 |
| Waveform Generation | Half-Sine Pulse (adjustable via interchangeable elastomeric impact seats) |
| Platform Uniformity (within Ø160 mm) | ±10% |
| Repeatability | Acceleration ±10%, Duration ±15%, Δv ±10% |
| Optional Features | Pneumatic braking system, spring-assisted acceleration enhancement, vibration-isolating mounting feet |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Frequency Range | 5–2000 Hz |
| Max. Acceleration | 980 m/s² (100 g) |
| Max. Velocity | 1.1 m/s |
| Max. Displacement | 25 mm p-p |
| Force Rating | 2.94 kN (300 kgf) |
| Payload Capacity | 120 kg |
| Moving Mass | 2.7 kg |
| Table Size | 150 mm diameter |
| Vibration Axes | Vertical (Z-axis) and Horizontal (X/Y via optional repositioning platform) |
| Temperature Range | −20 °C to +130 °C |
| Humidity Range | 40–98 % RH |
| Temp. Uniformity | ±2 °C (unloaded) |
| Temp. Stability | ±0.5 °C (unloaded) |
| Humidity Stability | ±2 % RH |
| Temp. Deviation | ≤±2 °C |
| Humidity Deviation | ≤±2 % RH |
| Heating Rate | −20 °C → +120 °C ≤ 60 min |
| Cooling Rate | Ambient → −20 °C ≤ 45 min (unloaded) |
| Test Duration Setting | 0–999 h |
| Platform Horizontal Travel | 2500 mm |
| Platform Vertical Lift Stroke | 1200 mm |
| Platform Load Capacity | 2000 kg |
| System Self-Weight | ≤1000 kg |
| Interface Ports | Ø200 mm (vertical), 1000 × 1000 mm (horizontal) |
| Sealing | Dual-layer high-flexibility cryo/thermal-resistant bellows (organic composite) |
| Control System | CT-2000/PD programmable frequency controller with sweep & resonance search functions |
| Brand | OK Instrumentation |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–42,000 (FOB) |
| Load Capacity | 10–100 kg |
| Table Dimensions | 20×20 to 80×65 cm |
| Acceleration Range | 150–15,000 m/s² |
| Pulse Duration | 0.5–30 ms |
| Waveform Options | Half-sine, Trapezoidal, Post-peak Sawtooth |
| Power Supply | AC 380 V ±5%, 50/60 Hz, 3-phase 5-wire |
| Brand | OK Instruments |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Max Load Capacity | 75 kg |
| Frequency Range | 1–5000 Hz |
| Max Acceleration | 0–15 g (0–147 m/s²) |
| Max Displacement (p-p) | 0–4 mm |
| Max Sinusoidal Force | 2000 kgf |
| 台面尺寸 (L×W×H) | 500 × 500 × 5 mm |
| 台体尺寸 (L×W×H) | 500 × 500 × 450 mm |
| Frequency Resolution | 0.01 Hz (accuracy ±0.1 Hz) |
| Degrees of Freedom | 4-axis simultaneous (X, Y, Z, rotational coupling via synchronized actuation) |
| Compliance | Designed to support ISO 16750-3, SAE J1211, GB/T 28046.3, and IEC 60068-2-64 test profiles |
| Max. Load Capacity | 60 kg |
|---|---|
| Frequency Range (Manual/Scan) | 1–200 Hz |
| Table Surface Dimensions | 550 × 550 × 46 mm |
| Table Body Dimensions | 550 × 550 × 350 mm |
| Displacement Amplitude (Empty Load) | 0–5 mm |
| Vibration Direction | Vertical |
| Waveform | Sinusoidal |
| Power Supply | 220 V / 50 Hz ±2% |
| Rated Power Consumption | 1.7 kVA |
| Timer Range | 0.01 s – 99.99 h |
| Control Interface | Digital LCD with Real-Time Parameter Display |
| Sweep Programs | Up to 30 Segments |
| Compliance Standard | GB/T 2423.10 |
| Vibration Mode | Fixed-Frequency & Linear Sweep |
| Base Construction | Heavy-Duty Steel Frame with Vibration-Damping Rubber Mounts |
| Drive Mechanism | Electromagnetic Shaker with Four-Point Synchronous Excitation |
| Brand | OK Instruments |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–42,000 (based on model) |
| Load Capacity | 10–100 kg |
| Table Dimensions | 20×20 to 80×65 cm |
| Acceleration Range | 150–15,000 m/s² |
| Pulse Duration | 0.5–30 ms |
| Waveform Options | Half-sine, Trapezoidal, Post-peak Sawtooth |
| Power Supply | AC 380 V ±5%, 50/60 Hz, 3-phase 5-wire |
| Brand | OK Instruments |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Load Capacity | 100 kg (customizable) |
| Speed Range | 100–300 rpm (continuously adjustable) |
| Speed Accuracy | ±3 rpm |
| Amplitude | 25.4 mm (1 inch) ±15% |
| Table Dimensions | 1200 × 1000 mm (customizable) |
| Timer Range | 0–99.99 hours |
| Power Consumption | 1.5 kW |
| Supply Voltage | 220 V, 50 Hz |
| Net Weight | ~250 kg |
| Drive Type | DC motor with synchronous silent belt transmission |
| Mounting | Heavy-duty channel steel base with vibration-damping rubber pads |
| Vibration Mode | Rotary (eccentric mass-driven, “galloping” motion) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Max. Test Mass | 75–500 kg |
| Shock Waveforms | Square Pulse & Half-Sine Pulse |
| Max. Acceleration | 1500 m/s² (150 g) for Square, 6000 m/s² (600 g) for Half-Sine |
| Max. Velocity Change | 7.6 m/s (Square), 7.3 m/s (Half-Sine) |
| Pulse Duration Range | 2–60 ms |
| Table Sizes | 500×500 mm to 1500×1500 mm |
| Compliance | JIS C 0041:1995, JIS Z 0119:1994, JIS Z 0202:1994, IEC 60068-2-27, MIL-STD-810E Method 516.3 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Max Test Load | 50–1000 kg |
| Worktable Dimensions | 50×50 cm to 120×120 cm |
| Pulse Peak Acceleration Range | 150–6000 m/s² (semi-sine), 150–2000 m/s² (haversine), 150–1000 m/s² (terminal-peak sawtooth & trapezoidal) |
| Pulse Duration | 18–1 ms (adjustable per waveform) |
| Waveform Options | Semi-sine, Terminal-Peak Sawtooth, Trapezoidal |
| Base Material | High-Strength Carbon Steel |
| Height Control | Digital Position Feedback System |
| Braking Mechanism | Integrated Hydraulic Brake |
| Isolation System | Imported Air Spring + Hydraulic Damping |
| Compliance | Designed per ISO 2247, ASTM D999, MIL-STD-810G Method 516.6 (Shock) |
| Platform Dimensions | 500 × 500 mm |
|---|---|
| Shaker Body Dimensions | 500 × 450 × 500 mm |
| Mounting Pattern | 25 × M10 threaded holes on platform surface |
| Vibration Axes | Independent or simultaneous excitation along X (horizontal, left–right), Y (vertical, up–down), and Z (horizontal, front–back) |
| Frequency Range | 1–5000 Hz (display resolution: 0.01 Hz) |
| Peak-to-Peak Displacement | 0–4 mm adjustable |
| Maximum Load Capacity | 75 kg |
| Peak Sinusoidal Force | 1125 kgf (≈11.03 kN) |
| Maximum Acceleration | ≤15 g (peak) |
| Waveform Options | Sinusoidal (full- or half-wave), programmable random, road-profile-simulated vibration, multi-axis coupled motion (4-DOF synchronized), mixed-mode (e.g., half-wave on Y + full-wave on X) |
| Test Duration Setting | 0–999,999 s (user-defined) |
| Power Consumption | 3.8 kW |
| Input Current | ≤15 A |
| Supply Voltage | 380 V ±20%, 3-phase, 50/60 Hz |
| Acceleration–Amplitude–Frequency Relationship | aₚₑₐₖ (g) = 0.002 × f² (Hz²) × D (mm, p–p) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | LXJ-Capacity |
| Maximum Load | 35–200 kg |
| Number of Test Stations | 4–64 |
| Acceleration Range | 30–200,000 m/s² |
| Specimen Height Limit | 200–300 mm |
| Test Axes | X, Y, Z (independently configurable) |
| Mounting Radius (from rotation center) | 200–1000 mm |
| Startup Time | ≤3–5 min |
| Continuous Operation Duration | 30–60 min |
| Power Supply | AC 380 V, 1.5–6.5 kVA |
| Dimensions (L×W×H) | 924×910×1242 mm to 1953×470×993 mm |
| Slip Ring Configuration | 15-channel, 500 V / 5 A |
| Weight | 1000–2300 kg |
| Compliance Standards | GJB 150, GJB 360, GJB 548, GB/T 2423, MIL-STD-202F, MIL-STD-810F, MIL-STD-883C, IEC 60068-2-27 |
| Brand | LienSheng |
|---|---|
| Origin | Taiwan |
| Model | LS-905 |
| Instrument Type | Static Coefficient of Friction Tester |
| Max Inclination Angle | 45° |
| Tilt Rate | 1.5 ± 0.5 °/s |
| Test Block Dimensions | 100 mm (L) × 50 mm (W) × 750 g |
| Sample Platform Size | 125 mm (W) × 280 mm (L) |
| Motor | 110 V, 5 W |
| Overall Dimensions | 400 mm (L) × 350 mm (W) × 350 mm (H) |
| Weight | 2.5 kg |
| Compliant Standards | CNS 13119, TAPPI T815 om-85 |
| Brand | Tuofeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Electromechanical Universal Testing Machine |
| Model | TFW-163 |
| Max Test Load | 5–100 kN (configurable) |
| Accuracy Class | 0.5 |
| Force Measurement Range | 0.4–100% FS |
| Force Indication Error | ±0.5% of reading |
| Force Resolution | 1/500,000 of full scale, unsegmented |
| Deformation Measurement Range | 0.2–100% FS |
| Deformation Error | ±0.5% of reading |
| Deformation Resolution | up to 1/300,000 |
| Displacement Error | ±0.5% of reading |
| Column Spacing | 840 mm |
| Crosshead Travel | 1000 mm (subject to chamber clearance) |
| Dimensions (W×D×H) | 1250 × 560 × 2400 mm |
| Weight | ~380 kg |
| Power Supply | AC 220 V / 50 Hz ±10%, 750 W |
| Environmental Chamber Temp Range | −40 °C to +100 °C |
| Chamber Internal Dimensions | 360 × 300 × 500 mm (W×D×H) |
| Chamber Heating Power | 1.5 kW |
| Chamber Temperature Stability | ±2 °C over 100 mm vertical zone |
| Chamber Ramp Rate | ≤30 min to +100 °C from ambient |
| Temperature Equilibration Time | ≤5 min (both above and below 0 °C) |
| Chamber Control | Programmable PID with Pt100 sensors, LCD controller, dual-port access (50 mm Ø), sliding thermal barrier inserts, stainless steel 304/316 construction, silicone door seal, centrifugal blower, compressor + resistive heating system |
| Origin | Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | WSM-20KN |
| Maximum Test Load | 20 kN |
| Load Cell Accuracy | ±0.5% FS |
| Force Measurement Accuracy | ±0.5% |
| Speed Accuracy | ±0.5% |
| Speed Range | 0.05–500 mm/min |
| Displacement/Strain Accuracy | ±0.5% |
| Extensometer Range | 10–1000 mm |
| Crosshead Travel (Effective) | 1160 mm |
| Test Width | 420 mm |
| Distance Between Grips (Effective) | 860 mm |
| Temperature Chamber Range | −40 °C to +150 °C |
| Changchun Intelligent JJ-20 Cryogenic Impact Testing Machine (Dual-Mode | Charpy & Izod) |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JJ-20 |
| Pricing | Available Upon Request |
| Max Impact Energy | 4 J (Charpy), 5.5 J (Izod) |
| Sampling Rate | 1.2 µs |
| A/D Resolution | 1/65536 |
| Load Range Selection | ×1, ×2, ×4, ×8 |
| Load Measurement Accuracy | ≤1% FS |
| Charpy Span Options | 40 mm, 60 mm, 62 mm |
| Charpy Specimen Dimensions | 4×6×50 mm, 4×10×80 mm |
| Izod Specimen Dimensions | 4×10×80 mm |
| Charpy Pendulum Velocity | 2.9 m/s |
| Izod Pendulum Velocity | 3.50 m/s |
| Temperature Range | –40 °C to ambient |
| Temperature Stability | ±0.5 °C |
| Temperature Uniformity | ±2 °C |
| Sample Handling | Semi-automatic feed, manual positioning |
| Origin | Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | JJ-20W |
| Quotation | Available Upon Request |
| Impact Energy Range | 0.5 J, 1 J, 2 J, 4 J, 7.5 J |
| Sampling Rate | 1.2 µs |
| A/D Resolution | 1/65536 |
| Load Measurement Accuracy | ≤2% |
| Span Options | 60 mm, 62 mm |
| Specimen Thickness | 4 mm, 10 mm, 13 mm |
| Specimen Width | 6 mm, 10 mm, 13 mm, 15 mm |
| Pendulum Impact Velocity (0.5–4 J) | 2.9 m/s |
| Low-Temperature Range | –60 °C (cascade refrigeration), –120 °C (liquid nitrogen injection) |
| High-Temperature Range | up to +200 °C (electric heating) |
| Temperature Control Accuracy | ±1 °C |
| Compliance | GB/T 1043.1–1993 (Charpy & Izod impact testing of rigid plastics) |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-JM8 |
| Pricing | Available Upon Request |
| Pressure Range | 0–2 MPa |
| Pulse Frequency | 0–3 Hz |
| Cycle Count | Up to 10⁷ cycles (programmable) |
| Environmental Temperature Range | −50 °C to +200 °C (constant or cyclic control) |
| Fluid Temperature Range | −50 °C to +200 °C (constant or cyclic control) |
| Test Media | Deionized water, ethylene glycol solutions, antifreeze mixtures, emulsions |
| Vibration Modes | Electromagnetic single-axis, mechanical single-axis, servo-controlled triaxial, robotic 6-DOF, rotational mechanical |
| Pulse Waveforms | Sine, triangular, trapezoidal, quasi-square |
| Channel Capacity | 2–10 independent test circuits |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Model | QUV1003 (Spray-Enabled) |
| Instrument Type | Electronic Universal Testing Machine for Accelerated Aging |
| Temperature Range | RT+10°C to 70°C |
| Temperature Uniformity | ±3°C |
| Humidity During Condensation | ≥75% RH |
| Standard Irradiation Temperature Options | 50°C, 60°C (recommended), or 70°C (±3°C tolerance) |
| Condensation Temperature | 50°C (±3°C) |
| Cycle Options | 4h UV / 4h Condensation or 8h UV / 4h Condensation |
| UV Lamp Center-to-Center Spacing | 65–70 mm |
| Specimen-to-Lamp Distance | 55 mm |
| UV Spectrum | UV-B (280–315 nm) |
| Standard Specimen Size | 75 × 150 mm |
| Water Requirement | Deionized or Distilled Water, ~8 L/day |
| Internal Chamber Dimensions (D×W×H) | 450 × 1165 × 500 mm |
| Overall Dimensions (D×W×H) | 600 × 1325 × 1480 mm |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | DM-III |
| Pricing | Available Upon Request |
| Stroke Frequency | 0–135 cycles/min (single-pass) |
| Counter Range | 0–9999 (dual-pass |
| Abrading Head Mass | 570 ± 20 g |
| Optional Weights | 50 g, 100 g, 200 g |
| Power Supply | 220 V, 50 Hz |
| Rated Power | 60 W |
| Dimensions (L×W×H) | 300 × 280 × 380 mm |
| Net Weight | ~25 kg |
| Origin | USA |
|---|---|
| Supplier Type | Authorized Distributor |
| Import Status | Imported |
| Model | 4350 |
| Pricing | Upon Request |
| Origin | United Kingdom |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ADE Series |
| Standard Compliance | ASTM E681, EN 45014, GB/T 12474-2008 |
| Operating Pressure Range | 0 to 101 kPa (gauge), adjustable down to –100 kPa (gauge) |
| Maximum Test Temperature | 150 °C |
| Oven Max Temperature | 300 °C |
| Ignition Source | 15 kV, 30 mA pulsed arc, 0.5 s duration |
| Electrode Gap | 3–4 mm |
| Reaction Tube Dimensions | 1400 ± 50 mm length, 60 ± 5 mm ID, ≥2 mm wall thickness (borosilicate glass) |
| Vent Valve Diameter | ≥25 mm |
| Stirring | Magnetic stirrer at tube base |
| Safety Interlock | Dual-door mechanical/electrical interlock with remote activation |
| Flame Detection | Visual + optional thermocouple-assisted detection for non-luminous flames (e.g., H₂) |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | YL-JZ-2T |
| Maximum Applied Force | 20 kN (2 metric tons) |
| Max Sample Dimensions | W30 × D30 cm |
| Overall Dimensions | W88 × H168 × D73 cm |
| Crush Stroke Range | 0–300 mm (adjustable) |
| Crush Speed | 1–500 mm/min (customizable) |
| Nail Penetration Speed | 1–50 mm/s (customizable) |
| Force Accuracy | ±0.5% of reading |
| Force Resolution | 1/500,000 full scale |
| Displacement Accuracy | ±0.5% of reading |
| Displacement Resolution | 0.01 mm |
| Force Units | N, kN, kgf, lbf |
| Control Interface | RS232 / RS485 |
| Voltage Measurement Range | 0–36 V (±0.5% FS) |
| Temperature Measurement Range | 0–300 °C (±1 °C) |
| Data Acquisition Rate | ≥30 Hz per channel |
| Video Monitoring | Optional HD in-chamber camera system |
| Safety Features | Overload, overtemperature, overvoltage, leakage, and emergency acoustic-optic alarm |
| Yuelian PW-H03F Adhesion Tester for Transdermal Patches — Compliant with Chinese Pharmacopoeia Chapter 0952 (Method IV | Adhesive Force Determination) |
|---|---|
| Brand | Yuelian / PW |
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PW-H03F |
| Instrument Category | Initial Tack Tester |
| Alternate Model | PW-8801A |
| Inclination Angle Range | 0–60° |
| Test Surface Width | 120 mm |
| Effective Test Zone Width | 80 mm |
| Standard Steel Balls | 1/32″ to 1″ (ASTM E380-compliant diameters) |
| Dimensions (L×W×H) | 320 × 140 × 180 mm |
| Net Weight | 6 kg |
| Compliance Standards | ChP 2015 Vol. IV, 0952 |
| JIS Z 0237 | 2017 |
| Brand | YueLian / PW |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | PW-JC50KV |
| Max Output Voltage | 50 kV |
| Electrical Capacity | 5 kVA |
| Input Power | 220 V ±10%, 50 Hz ±1% (Single-Phase AC) |
| Voltage Ramp Modes | Constant-Rate Rise, Stepwise Rise, Hold-at-Voltage Test |
| Test Medium | Air or Insulating Oil |
| Voltage Control | Contactless Solid-State Regulator |
| Breakdown Detection | Dual-Parameter (Voltage + Current) |
| Leakage Current Range | 5–200 mA |
| Accuracy | ≤0.5% |
| Safety Protections | Integrated Arc Suppression Grid, Fuse & Earth-Leakage Circuit Breaker, Automatic Pressure Relief |
| Compliance Standards | GB 1408.1–2016, GB/T 1695–2005, GB/T 13542.4–2009, GB/T 3333–1991, HG/T 3330–2003, GB 12656–1990, ASTM D149–2022, GB/T 507–2002, DL 429.9–1991 |
| Origin | Guangdong, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | YL-S90 |
| Quotation | Upon Request |
| Load Capacity Options | 10 N, 20 N, 50 N, 100 N, 200 N, 500 N, 1 kN (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Displacement Resolution | 1/500,000 full scale |
| Test Stroke | 500 mm / 800 mm (selectable) |
| Test Width | 110 mm |
| Speed Range | 0.1–500 mm/min (computer-programmable) |
| Drive System | Stepper motor + precision ground ball screw |
| Power Supply | 220 V, 50/60 Hz, 3 A |
| Power Consumption | 180 W |
| Dimensions (W×D×H) | 40 × 37 × 92 cm or 40 × 37 × 120 cm |
| Net Weight | 28 kg / 35 kg |
| Standard Accessories | One set of quick-release grips, PC software, USB-to-serial interface cable |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-S72Q |
| Price Range | USD 7,000 – 14,000 (FOB) |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity Options | 10 N to 5 kN (dual-range configuration available) |
| Force Resolution | 1 part in 500,000 |
| Force Accuracy | Better than Class 0.5 per ISO 7500-1 |
| Stroke Resolution | 1 part in 500,000 mm |
| Data Acquisition Rate | 50 Hz |
| Effective Stroke | 1000 mm |
| Speed Range | 0.001–30,000 mm/min (customizable) |
| Test Space Width | 140 mm |
| Power Supply | 220 V, 50–60 Hz |
| Motor Drive | AC Servo Motor |
| Transmission | Precision Ball Screw |
| Dimensions (W×D×H) | 520 × 590 × 1530 mm |
| Net Weight | 55 kg |
| Power Consumption | 400 W |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | GZL-B |
| Pricing | Upon Request |
| Max Operating Temperature | 1600 °C |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Temperature Sensor | Type B Platinum–Rhodium Thermocouple |
| Heating Rate | 1–15 °C/min (RT–1300 °C), 1–5 °C/min (1300–1600 °C) |
| Rated Power | ~16 kW |
| Control System | 50-Stage Programmable PID Controller with Auto-Tuning |
| Temperature Uniformity | ±1 °C (Control), ±2 °C (Soak) |
| Atmosphere Options | Air, N₂, Ar |
| Gas Flow Range | 0–10 L/min |
| Sample Dimensions | 40 × 40 × 230 mm (4 specimens per run) |
| Rotation Mechanism | Planetary motion |
| Crucible | Graphite |
| Slag Addition Port | Integrated top-access port |
| Crucible Lift | Bottom-entry vertical hydraulic/pneumatic lift mechanism |