Testing Machine
Filter
Showing 1711–1740 of 3415 results
| Brand | MTS |
|---|---|
| Origin | Shenzhen, China |
| Model | Exceed E43 Series |
| Force Range | 5 N – 10 kN |
| Frame Type | Benchtop |
| Max Test Speed | 500 mm/min |
| Min Test Speed | 0.001 mm/min |
| Position Resolution | 0.000041 mm |
| Crosshead Travel (unloaded) | 1000 mm |
| Crosshead Travel (with XSD204B fixture) | 700 mm |
| Test Width | 340 mm |
| Dimensions (H×W×D) | 1617 × 681 × 588 mm |
| Weight | ~120 kg |
| Power Supply | 220 V ±10%, 1100 W |
| Control System | Integrated Digital Closed-Loop Controller |
| Load Cell Interface | TEDS-compatible |
| Software | TestSuite TW |
| Compliance Standards | ASTM, ISO, DIN, EN, BS |
| Brand | MTS |
|---|---|
| Origin | Shenzhen, China |
| Model | Exceed E44 Series |
| Force Range | 100 N – 30 kN |
| Frame Type | Floor-standing |
| Max Test Speed | 500 mm/min |
| Min Test Speed | 0.001 mm/min |
| Position Resolution | 0.000036 mm |
| Crosshead Travel (standard, no fixtures) | 1150 mm |
| Test Width | 400 mm |
| Power Supply | 220 V ±10%, 1100 W (E44.104) / 1760 W (E44.304) |
| Compliance Standards | ASTM, ISO, DIN, EN, BS |
| Brand | MTS |
|---|---|
| Origin | Shenzhen, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MTS Exceed E45 Series |
| Instrument Type | Electromechanical Universal Testing Machine |
| Force Capacity Options | 50 kN, 100 kN, 300 kN |
| Frame Configuration | Floor-standing |
| Test Space Options | Single or Dual Space |
| Max Test Speed | 500 mm/min |
| Min Test Speed | 0.001 mm/min |
| Position Resolution | 0.000017 mm |
| Crosshead Travel (unloaded) | 1050 mm |
| Crosshead Travel (loaded with XSA105A fixture) | 500 mm |
| Test Width | 600 mm |
| Dimensions (H×W×D) | 2133 × 1230 × 870 mm |
| Weight | ~1400 kg |
| Power Supply | 220 V ±10%, 2200 W |
| Brand | MTS |
|---|---|
| Origin | USA |
| Model | Insight Series |
| Type | Electromechanical Universal Testing Machine |
| Load Capacity Options | 1–2 kN, 5–50 kN, 100–300 kN |
| Configurations | Standard, High-Stroke, High-Speed, Wide-Frame |
| Test Modes | Tensile, Compression, Flexure, Peel, Tear, Creep, Stress Relaxation, Cyclic Loading |
| Compliance Standards | ASTM E4, ASTM E8/E21, ASTM D638/D790/D3039, ISO 6892-1, ISO 178, ISO 1133, USP <1041>, FDA 21 CFR Part 11 (via software audit trail) |
| Brand | MTS |
|---|---|
| Origin | USA |
| Model | Landmark Series |
| Max Test Load | 500 kN |
| Frequency Range | < 200 Hz |
| Frame Weight | 635–1760 kg |
| Type | Electro-Hydraulic Servo Fatigue Testing Machine |
| Compliance | ASTM E4, E8, E606, E647, ISO 1099, ISO 6892-1, ASTM D3479, USP <1042>, FDA 21 CFR Part 11 (with optional audit trail module) |
| Brand | MTS |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | MTS TestSuite |
| Instrument Type | Electromechanical Universal Testing System |
| Pricing | Available Upon Request |
| Brand | PW (Yuelian) |
|---|---|
| Origin | Guangdong, China |
| Model | PW-SS20C |
| Test Stations | 20 |
| Test Angles | 90° and 180° (adjustable) |
| Timer Resolution | 0.1 min, Max Duration: 999999.9 min (battery-backed electronic LCD display) |
| Standard Weight | 1 kg (interchangeable weights available) |
| Substrate | 20 stainless steel plates (304, 50 × 50 × 0.5 mm, ASTM D3654-compliant surface finish) |
| Fixturing | 20 dual-pin connection clips with spring-damped drop prevention barrier |
| Frame Material | Powder-coated cold-rolled steel sheet |
| Vibration Isolation | Integrated helical compression springs (damping ratio ζ ≈ 0.25) |
| Dimensions (W×D×H) | 94 × 22 × 60 cm |
| Net Weight | 60 kg |
| Compliance | GB/T 2792–2014, GB/T 4851–2014, PSTC-7 (2020), CNS 11888 |
| Brand | PW (Yuelian) |
|---|---|
| Origin | Guangdong, China |
| Model | PW-SS8C |
| Testing Stations | 8 |
| Test Angles | Adjustable 90° and 180° |
| Timer Resolution | 0.1 min, Max Duration: 999999.9 min (LCD Display with Battery Backup) |
| Standard Weight | 1 kg per station (optional weights available) |
| Substrate | Stainless Steel Plates (8 pcs) |
| Fixture | 8 Connection Strips |
| Structural Frame | Powder-Coated Steel Sheet |
| Vibration Damping | Integrated Spring Isolation System with Safety Guardrails |
| Dimensions (W×D×H) | 45 × 22 × 52 cm |
| Net Weight | 25 kg |
| Compliance | GB/T 2792, GB/T 4851, PSTC-7, CNS 11888 |
| Brand | CIMACH |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZSDS |
| Price Range | USD 70,000 – 140,000 (FOB) |
| Instrument Type | Electro-Hydraulic Servo Fatigue Testing Machine |
| Maximum Test Load | 50–3000 kN |
| Frequency Range | 5–40 Hz |
| Host Weight | 3000 kg |
| Brand | NCS |
|---|---|
| Origin | Beijing, China |
| Manufacturer | NCS (Steel Research Institute) |
| Type | Pendulum Impact Testing Machine |
| Model | NCS DFAI |
| Imaging Sensor | 3-Megapixel CCD |
| Measurement Accuracy | ±0.02 mm |
| Compliance | Designed for ASTM E436, ASTM E23, ISO 148-1, ISO 83, GB/T 229, GB/T 8363 |
| Software | Proprietary fracture morphology analysis suite with audit trail and data export (CSV, TIFF, PDF) |
| Brand | NCS |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | GNT100 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Max Test Load | 100 kN |
| Accuracy Class | 0.5 |
| Force Measurement Range | 0.4–100% FS (full-scale, no range switching) |
| Force Resolution | 1/500,000 of full scale, constant across entire range |
| Force Indication Error | ±0.5% of reading |
| Deformation Measurement Range | 0.2–100% FS |
| Deformation & Displacement Indication Error | ±0.5% of reading |
| Displacement Resolution | 0.016 µm |
| Crosshead Speed Range | 0.001–500 mm/min (infinitely variable) |
| Force Control Rate Range | 0.005–5% FS/s |
| Strain Rate Range | 0.02–5% FS/s |
| Closed-Loop Control Modes | Constant Force, Constant Strain, Constant Displacement (0.5–100% FS) |
| Speed Accuracy | ±0.2% of set value (0.01–500 mm/min) |
| Effective Tensile Space | 800 mm |
| Effective Test Width | 600 mm |
| Dimensions (H×W×D) | 1921 × 1997 × 660 mm |
| Software Platform | LZCX-800, Windows 7-based, open architecture, graphical UI, multi-method support (tension, compression, bending, shear), unit conversion (N, kN, gf, kgf, lbf, mm, in), real-time stress–strain plotting |
| Protection Functions | Overload, mechanical limit, overcurrent, overvoltage, overtemperature |
| Control Interchange | Seamless, shock-free transition among force, strain, and displacement control modes |
| Brand | NCS |
|---|---|
| Origin | Beijing, China |
| Manufacturer | NCS (Steel Research Institute Nano-Characterization Co., Ltd.) |
| Type | Pendulum Impact Tester |
| Compliance Standards | GB/T 229, GB/T 19478–2005, ASTM E23, ISO 14556 |
| Output Data | Load-time, Force-displacement, Energy absorption, Crack initiation & propagation parameters (K₁d, J₁d) |
| Sensor Resolution | High-resolution dynamic load cell & energy transducer |
| Control Interface | Touchscreen-based digital control system |
| Test Modes | Charpy, Izod, Tensile Impact, Bending Impact |
| Report Export | Word, Excel-compatible formats |
| Frame Construction | Monolithic cast steel base and column |
| Brand | NCS |
|---|---|
| Model | YYU-5/50 |
| Gauge Length | 50 mm |
| Extension Range | ±5 mm |
| Output Signal | Analog Voltage (±10 V) or Digital RS-232/RS-485 |
| Resolution | ≤0.1 µm |
| Accuracy | ±0.5% of full scale |
| Operating Temperature | 10–40 °C |
| Compliance | ASTM E8/E21, ISO 6892-1, GB/T 228.1 |
| Origin | Japan |
|---|---|
| Supplier Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | HS-Heat |
| Price | USD 950,000 (FOB Yokohama) |
| Specimen Thickness | 0.2–3.2 mm |
| Specimen Width | 30–200 mm |
| Specimen Length | 200–300 mm |
| Electrical Supply | 45–150 kVA, 50/60 Hz (Secondary Voltage: 6–24 V) |
| Max. Heating Temperature | 1400 °C |
| Max. Heating Rate | 500 °C/s |
| Cooling Media | Compressed Air, Nitrogen, Water Mist, Direct Spray |
| Cooling Rate Range | 0.1–1000 °C/s |
| Tensile Load Capacity | 50 kN |
| Actuator Stroke | 50 mm |
| Anti-Buckling Mechanism | Hydraulic Preload System |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | NMC-II |
| Pricing | Available Upon Request |
| Motor | 60 W, 220 V, 50 Hz |
| Rotational Speed Range | 0–54 rpm |
| Abrading Head Load | 1000 g (standard) |
| Optional Weights | 250 g, 500 g |
| Dimensions (L×W×H) | 260 × 240 × 340 mm |
| Net Weight | 20 kg |
| Brand | Norman Tool |
|---|---|
| Origin | USA |
| Model | 7-IBB-CC |
| Load Options | 55 g, 175 g, 275 g |
| Rotational Speed | 16 rpm (50 Hz) / 18 rpm (60 Hz) |
| Counter Type | Digital LCD (0–999,999 cycles) |
| Sample Mounting | Flat & 3D fixtures included |
| Power Supply | 220 V, 50/60 Hz, 5 A |
| Weight | ~17 kg |
| Compliance | ASTM F2357-04, DIN-compatible abrasion evaluation |
| Brand | Norman Tool |
|---|---|
| Origin | USA |
| Model | 7-IBB-CC |
| Load Options | 55 g, 175 g, 275 g |
| Counter Type | Digital LCD (0–999,999 cycles) |
| Sample Mounting | Flat & 3D fixtures |
| Compliance | ASTM F2357-04 |
| Power Supply | 220 V, 50/60 Hz, 5 A |
| Weight | ~17 kg |
| Accessories | Calibration plate (certified), surface level gauge, hex key set, LED magnifier, two counterweights, three O-rings, 3D sample holder |
| Brand | North Guang Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HMPL-2000 |
| Max Test Force | 2000 N |
| Stroke Range | 0–100 mm |
| Compression Frequency | 20–120 cycles/min |
| Platen Diameter | Ø250 mm |
| Specimen Dimensions | (380±20) mm × (380±20) mm × (50±2) mm |
| Load Accuracy | ±20 N (at 750 N setpoint) |
| Display | LCD with Chinese UI |
| Compliance | GB/T 18941, ISO 3385, QC/T 56-93, JASO B408-84 |
| Brand | All Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | BDJC-50kV |
| Maximum Output Voltage | 50 kV AC/DC |
| Output Current | Adjustable up to 100 mA (standard setting: 30 mA) |
| Voltage Accuracy | ≤ ±1% |
| Rising Rate Range | 10–3000 V/s (adjustable in 7 steps) |
| Power Input | AC 220 V, 3 kVA |
| Electrode Configurations | Two φ25 mm brass electrodes + One φ75 mm brass electrode |
| Test Environments | Air or transformer oil immersion |
| Compliance | Designed per IEC 60243-1, ASTM D149, GB/T 1408.1, and ISO 60243-1 |
| Safety Enclosure | Transparent acrylic shield |
| Dimensions (L×W×H) | 700 × 800 × 1500 mm |
| Weight | ~120 kg |
| Brand | NOSELAB ATS |
|---|---|
| Origin | Italy |
| Model | IMPats 15/25/50 |
| Impact Energy Range | 0–15 J, 0–25 J, 0–50 J |
| Impact Velocity | 2.9 m/s, 3.46 m/s, 3.8 m/s (model-dependent) |
| Pendulum Moment (Impact Constant) | Calibrated per energy range |
| Load Cell Range | Matched to nominal impact energy (0–15 J / 0–25 J / 0–50 J) |
| Maximum Lifting Height | Compliant with ISO 179, ISO 180, ASTM D256, ASTM E23, DIN 53438, UNI EN ISO 13802 |
| Key | Origin: Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | NW-1000 |
| Quotation | Available Upon Request |
| Torque Range | 0–1000 N·m |
| Torque Accuracy | ±1% of reading |
| Angular Displacement Range | n × 360° (n ≤ integer limit) |
| Twist Angle Accuracy | ±0.1° |
| Brand | Nyilas |
|---|---|
| Origin | Germany |
| Model | NRT / NLN / NLH |
| Gauge Length Range | 2–100 mm |
| Deformation Measurement Range | ±10 mm |
| Relative Accuracy | ±1% |
| Absolute Accuracy | ±1 µm |
| Linearity | 0.1–0.15% of Full Scale |
| Operating Temperature Range | 4 K (−269 °C) to 373 K (+100 °C) |
| Mass | 0.6–10 g |
| Compliance | ASTM E8/E21, ISO 6892-1, ISO 15630-1, EN 10002-4, USP <1033>, FDA 21 CFR Part 11 (software-enabled audit trail) |
| Brand | NYX |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | CCH |
| Price Range | USD 115,000 – 175,000 |
| Brand | NYX |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | DS-061-5 |
| Impact Energy | 50 J |
| Impact Velocity | 10 m/s |
| Pendulum Torque (Impact Constant) | 0.25 N·m |
| Load Cell Range | 0–500 N |
| Maximum Lifting Height | 500 mm |
| Stroke | 150 ± 10 mm |
| Peak Deceleration (at 10 kg load, 500 mm drop height) | 42 ± 6 g |
| Dimensions (W×D×H) | 220 × 120 × 275 cm |
| Weight | 360 kg |
| Power Supply | AC 220 V, 50 Hz, 1500 W |
| Operating Temperature | 10–35 °C |
| Brand | NYX |
|---|---|
| Model | HY-759-1 |
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Category | Domestic |
| Instrument Type | Crockmeter (Tribological Tester for Color Fastness) |
| Sample Size | 120 × 20 mm |
| Wool Felt Pad Area | 15 × 15 mm |
| Rubbing Hammer Mass | 500 g |
| Auxiliary Weight Mass | 500 g |
| Rubbing Speed | 40 ± 2 cycles/min |
| Stroke Length | 35 cm |
| Counter Range | 0–999,999 |
| Power Supply | AC 220 V, 50 Hz, 500 W |
| Operating Environment | 20 ± 2 °C, 65 ± 4 % RH |
| Dimensions (L×W×H) | 30 × 45 × 48 cm |
| Net Weight | 35 kg |
| Compliance Standards | QB/T 2537–2001, ISO 11640:2016, QB/T 2882–2007 (Method A), QB/T 2880–2007, GB/T 3903.31–2022, IUP 450, BS 1006:D02, DIN 53339, SATRA TM 173, SATRA TM 177 |
| Brand | NYX |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HY-835XZ |
| Price Range | USD 20,000–25,500 |
| Instrument Type | Specialized Vertical Free-Fall Impact Tester |
| Nominal Impact Energy | 2000 J |
| Impact Velocity | 10 m/s |
| Pendulum Moment (Impact Constant) | 0.14 N·m/(J)¹ᐟ² |
| Force Sensor Range | 0–999 N |
| Maximum Lifting Height | 1 m |
| Drop Height Adjustment Range | 0–200 mm |
| Standardized Test Mass | 8.5 kg (impact head + integrated load cell) |
| Impact Head Geometry | Circular top, Ø45 mm, tip radius R = 1.0 ± 0.25 mm, mass < 0.2 kg |
| Displacement Measurement Range | 0–100 mm |
| Sampling Frequency | >1000 Hz |
| Cycle Time | ≤3 s per test (2 s drop + 1 s reset) |
| Brand | NYX |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (PRC) |
| Model | HY-835YS |
| Instrument Category | High-Frequency Fatigue Testing Machine |
| Maximum Test Load | 5000 N |
| Frequency Range | 0–5 Hz (adjustable) |
| Test Stroke | 0–60 mm (resolution: 0.01 mm) |
| Load Cell Capacity | 0–500 kg (force resolution: 0.01 N) |
| Impact Head Dimensions | Forefoot pad: (85 ± 1) mm × (50 ± 1) mm × 5 mm crown height |
| Heel pad | Ø(50 ± 1) mm × 5 mm crown height |
| Dynamic Fatigue Max Load | 1500 N |
| 30th Impact Force (Shock Absorption Mode) | 2300 N ± 200 N |
| Column Spacing | 420 mm |
| Control Modes | Load-controlled and Displacement-controlled |
| Host Dimensions (W×D×H) | 600 × 1300 × 1800 mm |
| Net Weight | Approx. 320 kg |
| Brand | NYX |
|---|---|
| Model | HY-932CS |
| Type | Electronic Universal Testing Machine |
| Origin | Tianjin, China |
| Manufacturer | NYX (OEM/ODM Producer) |
| Force Capacity Options | 2–2000 kgf (20 N–20 kN) |
| Load Accuracy | ±0.5% of reading (within 0.4–100% of full scale) |
| Load Resolution | 1/200,000 of maximum test force |
| A/D Converter | 24-bit high-precision |
| Sampling Rate | Up to 200 Hz |
| Displacement Accuracy | ±0.5% of reading (within 2–100% FS) |
| Displacement Resolution | 0.005 mm |
| Large-Deformation Measurement Range | 10–800 mm |
| Large-Deformation Accuracy | ±0.5% of reading (within 2–100% FS) |
| Large-Deformation Resolution | 0.008 mm |
| Drive System | Panasonic 750 W servo motor + HIWIN precision ball screw + rotary encoder |
| Speed Range | 0.05–500 mm/min (optional 0.1–1000 mm/min) |
| Speed Accuracy | ±0.5% of set value |
| Effective Test Width | 420 mm or 560 mm |
| Test Stroke | 1000 mm (adjustable gauge length, fixture height excluded) |
| Control Modes | Position, Constant Velocity, Constant Load, Constant Load Rate, Constant Strain Rate, Constant Stress Rate |
| Software Platform | Windows-based (XP and later compatible), modular standards library (GB, ASTM, DIN, JIS, BS), dual-report editing (Excel-integrated), auto-scaling real-time plots (Load–Displacement, Load–Time, Stress–Strain, Load–Extension), automated post-test calculations (UTS, YS, E-modulus, elongation%, peel max/min/avg, etc.), multi-unit conversion, bilingual UI (English/Chinese) |
| Brand | NYX |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Drop-Weight Impact Tester |
| Nominal Impact Energy | 50 J |
| Load Cell Range | 50 kN / 100 kN |
| Compliance Standard | GB 24541 (Hand Protection – Impact Resistance) |
| Sample Positioning Accuracy | ±0.5 mm |
| Data Acquisition Rate | ≥10 kHz |
| Force Resolution | ≤0.01 kN |
| Test Report Output | PDF/CSV with Timestamp, Operator ID, and Audit Trail Metadata |
| Table Top Dimensions | 200 × 200 mm |
|---|---|
| Maximum Load Capacity | 10 kg |
| Pulse Duration Range | 0.6–20 ms (programmable, automatic) |
| Peak Acceleration Range | 150–20,000 m/s² |
| Pulse Waveform | Half-sine |
| Impact Direction | Vertical |
| Secondary Impact Prevention | Hydraulic–friction braking system |
| Height Adjustment | Digital preset + hydraulic lifting |
| Control & Measurement System | Integrated shock analysis unit |
| Table Mass | 2800 kg |
| Overall Dimensions | 750 × 2600 × 1000 mm |
| Power Supply | AC 380 V ±10%, 50 Hz, 3 kVA |