Water Oil Bath Constant Temperature Tank
Filter
Showing 121–150 of 709 results
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDK-F54A |
| Bath Volume | 54 L |
| Temperature Range | RT+5°C to 100°C |
| Temperature Resolution | 0.1°C |
| Temperature Stability | ±0.5°C (typical, per ISO 17025-compliant calibration conditions) |
| Heating Power | 4000 W |
| Power Supply | AC 220 V, 50 Hz |
| Circulation Type | Internal recirculation pump |
| Control Mode | PID-based heating-only temperature regulation |
| Construction | 304 stainless steel inner chamber and lid, electrostatically sprayed steel exterior |
| Safety Features | Dry-run protection with water level sensor, over-temperature alarm & cut-off, power-failure parameter retention |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TDK-XB54 |
| Instrument Type | Constant-Temperature Bath |
| Circulation Function | External Circulation |
| Temperature Control | Heating-Only |
| Bath Volume | 54 L |
| Temperature Range | RT + 5 °C to 100 °C |
| Temperature Resolution | 0.1 °C |
| Input Power | 4000 W |
| Supply Voltage | AC 220 V, 50 Hz |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDK-120A |
| Bath Volume | 120 L |
| Temperature Range | RT + 5°C to 100°C |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Heating Power | 9000 W |
| Supply Voltage | AC 380 V, 50 Hz |
| Control Type | PID-based microprocessor controller with timer function |
| Construction | 304 stainless steel interior and lid, electrophoretic epoxy-coated exterior, Teflon-coated immersion surfaces |
| Safety Features | Dry-run protection with water level sensor, over-temperature alarm and cut-off, auto-recovery after power interruption, parameter memory retention |
| Optional Configurations | External chiller integration (R-series), 30-segment programmable temperature ramping, auto-fill module (requires external water source) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | WDC-164AB |
| Bath Volume | 164 L |
| Temperature Range | +5 to 100 °C |
| Control Mode | Refrigeration & Heating (optional R-series compressor cooling) |
| Circulation Type | Internal & External |
| Temperature Stability | ±0.3 °C (typical) |
| Temperature Resolution | 0.1 °C |
| Power Supply | AC 220 V, 50 Hz |
| Construction | 304 Stainless Steel Interior & Lid |
| Safety Features | Dry-run protection (F-type), Over-temperature alarm, Auto-recovery after power failure, Parameter memory retention |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-Made) |
| Model | DT-230A |
| Price | USD 920 (FOB Shanghai) |
| Temperature Range | Ambient to 100 °C |
| Temperature Stability | ±0.12 °C |
| Absolute Accuracy at 50 °C | ±0.1 °C |
| Repeatability | ±0.14 °C |
| Power Supply | 220 V AC, 50 Hz |
| Control System | PID-based microprocessor with auto-tuning |
| Display | Dual-line LED, touch-sensitive keypad |
| Safety Features | Over-temperature alarm and automatic cut-off |
| Mounting Options | Vertical or horizontal orientation |
| Viewing Window | Tempered glass viewport on heating chamber |
| Enclosure Design | Compact, modular chassis compatible with stacked HPLC configurations |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | DT-230B |
| Quotation | Available Upon Request |
| Temperature Accuracy | ±0.1 °C (at 50 °C) |
| Temperature Uniformity | ±0.1 °C |
| Temperature Range | Ambient to 100 °C |
| Heating Chamber Dimensions (L×W×H) | 485 × 65 × 50 mm |
| Power Supply | 220 V AC, 50 Hz |
| Control System | PID-based Microprocessor Controller with Self-Tuning Algorithm |
| Display | Dual-Line LED, Touch-Sensitive Keypad |
| Safety Features | Over-Temperature Alarm & Automatic Cut-Off |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | DT-230C |
| Pricing | Available Upon Request |
| Temperature Stability | ±0.1 °C |
| Absolute Accuracy at 50 °C | ±0.1 °C |
| Repeatability | ±0.1 °C |
| Temperature Range | Ambient to 100 °C |
| Power Supply | 220 V AC, 50 Hz |
| Heating Chamber Dimensions (L×W×H) | 465 × 104 × 84 mm |
| Column Capacity | Up to three semi-preparative or gel-filtration columns |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | PSL |
| Temperature Range | –40 °C to 0 °C / –80 °C to 0 °C / –80 °C to 20 °C |
| Temperature Stability | ±0.5 °C (PSL-1400) / ±1.0 °C (PSL-1810, PSL-2000) |
| Stirring Speed | 100–800 rpm |
| Heating Power | 250 W / 450 W / 750 W |
| Cooling Capacity | Air-Cooled Compressor System (R404A, R507A/R23 Dual-Circuit) |
| Tank Material | SUS304 Stainless Steel |
| Capacity | 2.1 L / 3.5 L / 8 L |
| Stirring Motor Output | 15 W / 25 W / 25 W |
| Safety Features | Leakage Current Protection, Overcurrent Protection, Overheating Prevention, Compressor High-Pressure Cut-off, Sensor Open-Circuit Detection, Self-Diagnostic Function (Heater Fault, Sensor Anomaly, Temp Deviation Alert), Compressor Delay Start |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | T100-MST20 |
| Price | Upon Request |
| Temperature Range | RT + 5°C to 100°C |
| Temperature Stability | ±0.05°C |
| Display | 4-digit LED |
| Temperature Resolution | 0.1°C |
| Heating Power | 1.3 kW (230 V) / 1.4 kW (120 V) |
| Bath Opening | 240 × 210 mm |
| Bath Capacity | 20 L |
| Minimum/Maximum Liquid Depth | 185 / 225 mm |
| Total Power Consumption | 1.4 kW (230 V, 50/60 Hz) / 1.5 kW (120 V, 50/60 Hz) |
| Max. Gerber Fat Meter Capacity | 36 units (3 × H1-25M racks, 12 per rack) |
| Safety Features | Fixed overtemperature cut-off, low-level fluid alarm |
| Control System | Detachable digital PID controller with adaptive tuning, 3 programmable setpoints, flywheel + dual-button interface |
| Construction | Acid-resistant stainless steel inner tank and outer housing, removable stainless steel lid with ergonomic handles |
| Immersed Components | Acid-resistant heater, float switch, and Pt100 temperature sensor |
| Calibration | User-executable self-calibration routine |
| Brand | Gerber |
|---|---|
| Origin | Germany |
| Model | WB 436-D |
| Bath Volume | 16 L |
| Temperature Range | Ambient to 99 °C |
| Temperature Stability | ±0.3 °C (at 37 °C, steady state) |
| Circulation | Internal & External Pump |
| Power | 1000 W |
| Voltage/Frequency | 230 V / 50–60 Hz |
| Display | 4-digit LED |
| Timer Range | 1–99 min |
| Dimensions (L×W×H) | 396 × 331 × 265 mm |
| Weight | 10.1 kg |
| Construction | Stainless Steel Inner & Outer Chamber |
| Overheat Protection | Dual-stage thermal cutoff |
| Recommended Fluid | Distilled Water |
| Brand | Grant Instruments (Cambridge, UK) |
|---|---|
| Origin | United Kingdom |
| Model | GD100-S12 |
| Temperature Range | 0–100 °C |
| Stability @37 °C | ±0.02 °C |
| Uniformity @37 °C | ±0.05 °C |
| Set/Display Resolution | 0.1 °C |
| Bath Volume | 12 L |
| Internal Dimensions (L×W×H) | 325×300×150 mm |
| External Dimensions (L×W×H) | 350×325×175 mm |
| Overall Height (incl. controller) | 355 mm |
| Heating Power | 1.4 kW (240 V) / 1.3 kW (115 V) |
| Input Voltage | 230 V AC, 50–60 Hz or 120 V AC, 50–60 Hz |
| Safety | Float-switch low-level cut-off |
| Calibration | Two-point user calibration supported |
| Display | 4-digit, 13 mm red LED |
| Preset Memory | 4 temperature values |
| Optional Accessories | C1G immersion cooler, PL12 curved lid, VR tube rack, RS14 lift platform, PS20 polypropylene beads |
| Brand | Grant Instruments |
|---|---|
| Origin | United Kingdom |
| Model | GD120-S12 |
| Temperature Range | 0 °C to 100 °C (stainless steel bath) / RT+5 °C to 99 °C (plastic bath) |
| Stability @37 °C | ±0.02 °C |
| Uniformity @37 °C | ±0.05 °C |
| Set Resolution | 0.1 °C |
| Display | 4-digit 13 mm LED |
| Bath Volume | 12 L |
| Heating Power | 1.4 kW (240 V) / 1.3 kW (115 V) |
| Safety | Float-switch low-fluid protection |
| Calibration | Two-point user calibration |
| External Dimensions (L×W×H) | 420 × 350 × 180 mm |
| Overall Dimensions (incl. controller) | 420 × 350 × 360 mm |
| Power Supply | 230 V, 50–60 Hz (1.5 kW) / 120 V, 50–60 Hz (1.4 kW) |
| Compatible Accessories | C1G immersion cooler, PL12 lid, VR/QR tube racks, RS14 lift platform |
| Brand | Grant Instruments (UK) |
|---|---|
| Origin | United Kingdom |
| Model | GLS Aqua 12 Plus / GLS Aqua 18 Plus |
| Temperature Range | Ambient +5°C to 99°C |
| Temperature Stability | ±0.1°C @ 37°C |
| Temperature Uniformity | ±0.1°C @ 37°C |
| Linear Oscillation Range | 40–400 rpm |
| Oscillation Amplitude | 18 mm |
| Bath Capacity | 12 L or 18 L (stainless steel, electropolished AISI 316) |
| Display | 3-digit LED, 0.1°C resolution |
| Power Supply | 120 V / 230 V, 50–60 Hz |
| Max. Power Consumption | 0.8 kW (GLS Aqua 12 Plus), 1.15–1.5 kW (GLS Aqua 18 Plus) |
| Safety Features | Overtemperature cut-off, low-level fluid alarm, user-configurable timer with audible alert |
| Dimensions (H×D×W) | 270 × 390 × 335 mm (12L), 270 × 570 × 335 mm (18L) |
| Immersion Depth | 0–60 mm |
| Tray Dimensions | 240 × 235 mm (12L), 420 × 235 mm (18L) |
| Origin | UK |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | HED |
| Price | Upon Request |
| Temperature Range | 50–260 °C |
| Stability | ±0.25 °C (at 150 °C, per DIN 58966) |
| Uniformity | ±0.2 °C (at 150 °C, per DIN 58966) |
| Display | LED, Resolution 1 °C |
| Timer | 1–9999 min |
| Alarm | High/Low Temperature |
| Heating Power | 1.1 kW (HE10D), 2.2 kW (HE30D) |
| Total Power Consumption | 1.2 kW (HE10D), 2.3 kW (HE30D) |
| Max Flow Rate | 6 L/min (with optional HQ pump) |
| Pump Head Pressure | 1.6 m @ 0 L/min |
| Tubing ID | 7.5 mm |
| Bath Opening | 190×210 mm (HE10D), 350×305 mm (HE30D) |
| Bath Dimensions (L×W×H) | 305×210×185 mm (HE10D), 455×305×240 mm (HE30D) |
| Liquid Depth Range | 100–140 mm (HE10D), 145–190 mm (HE30D) |
| Safety Features | Adjustable Over-Temperature Cut-Out, Float-Switch Level Protection |
| EMC Emission Class | Class A |
| Fluid Compatibility | Silicone Oil (recommended), other high-temperature heat transfer fluids |
| Optional External Circulation Pumps | HQ10 (for HE10D), HQ30 (for HE30D), mountable on insulated lid, for closed-loop systems only |
| Brand | Grant |
|---|---|
| Origin | UK |
| Model | JB Aqua Plus |
| Temperature Range | Ambient +5°C to 98°C |
| Stability | ±1.0°C |
| Setpoint Resolution | 0.1°C |
| Control Type | Analog Dial |
| Heating Power | 0.13–2.1 kW (model-dependent) |
| Chamber Volume | 2–34 L (single) or 5+12 L (dual) |
| Construction | Stainless Steel Interior & Exterior |
| Safety Features | Adjustable Over-Temperature Cut-Off, Dry-Run Protection |
| Standard Accessories | Polycarbonate Dome Lid, Insulated Base |
| Drain Valve | Optional on JB Aqua 12 Plus, 18 Plus, 26 Plus, 34 Plus, and Dual Plus models |
| Compliance | CE-marked, designed per IEC 61010-1 for laboratory use |
| Brand | VWR |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | OLS200 / 66238-204 |
| Pricing | Upon Request |
| Brand | Grant |
|---|---|
| Origin | UK |
| Model | TC120 R |
| Temperature Range | −20 °C to +100 °C |
| Stability | ±0.1 °C (DIN 12876, water @ 10 °C) |
| Pump Flow Rate | up to 16 L/min |
| Display | 4-digit LED |
| Control | Adaptive Smart PID with Intelligent Control Optimization (ICO™) |
| Calibration | User-accessible two-point self-calibration |
| Safety Features | Adjustable overtemperature cutoff, low-level float switch, audible alarm |
| Communication | RS232 & USB (with Labwise™ software support) |
| Compliance | DIN 12876 Class I, CE, RoHS |
| Brand | Grant Instruments |
|---|---|
| Origin | United Kingdom |
| Model | TX150 R |
| Temperature Range | −47 °C to +100 °C |
| Stability | ±0.1 °C (DIN 12876, water @ 10 °C) |
| Max Flow Rate | 18 L/min (adjustable) |
| Max Pressure | 310 mbar |
| Display | QVGA TFT color touchscreen |
| Programmability | 30-step program, USB & RS232 interface |
| Compliance | DIN 12876, CE, RoHS, Class B EMC |
| Brand | Grant Instruments |
|---|---|
| Origin | United Kingdom |
| Model | T100 R |
| Temperature Range | 0 to 100 °C |
| Stability | ±0.1 °C (DIN 12876, water @ 10 °C) |
| Refrigerant | R134a |
| Control | Adaptive Smart PID with Intelligent Control Optimization (ICO™) |
| Display | 4-digit LED |
| Communication | USB & RS232 (TX150/TXF200 models) |
| Pump Flow Rate | Up to 23 L/min (adjustable) |
| Max Pressure | 530 mbar |
| Safety Features | Adjustable overtemperature cut-off, low-level float switch, anti-freeze protection, 100 °C hardware limit |
| Brand | Grant Instruments |
|---|---|
| Origin | United Kingdom |
| Model | T100 Series |
| Temperature Range | 0 °C to 100 °C |
| Stability (DIN 12876 @ 70 °C) | ±0.05 °C |
| Uniformity (DIN 12876 @ 70 °C) | ±0.1 °C |
| Setpoint Resolution | 0.1 °C |
| Heating Power (230 V) | 1.3 kW |
| Built-in Circulation Pump | Yes (max. 16 L/min, 210 mbar) |
| Bath Compatibility | ST-series (stainless steel, 5–38 L) and P-series (polypropylene, 5–18 L) |
| Safety Features | Over-temperature cut-off, low-level float switch, audible/visual alarm |
| Interface | 4-digit LED display, rotary knob + two function keys |
| Programmability | 4 preset temperatures, simple manual setup |
| Optional Accessories | Labwise™ PC software, external probes (TXPEP/TXSEP), VTP high-pressure pumps, immersion chillers (C1G/C2G), heat-exchange coils (CW5), bath covers, sample racks (VR/QR series) |
| Brand | Grant Instruments (UK) |
|---|---|
| Origin | United Kingdom |
| Model Series | T100, TC120, TX150, TXF200 |
| Bath Volume | 38 L |
| Temperature Range | 0–200 °C |
| Temperature Stability | ±0.005 °C (at setpoint, typical for TX150/TXF200 under optimal conditions) |
| Circulation Mode | Internal & External (T100 supports internal only) |
| Control Type | Refrigerated/Heating |
| Heating Power (230 V) | 1.3–1.9 kW |
| Max Flow Rate (Water) | 16–23 L/min |
| Max Pressure (Water) | 210–530 mbar |
| Interface | USB & RS232 (TC120/TX150/TXF200) |
| Display | 4-digit LED / QVGA TFT color screen |
| Setpoint Resolution | 0.1 °C (0.01 °C with Labwise™ software) |
| Calibration | Two-point user calibration supported (TX150/TXF200) |
| Safety Features | Over-temperature cutoff (adjustable/fixed), low-level float switch, programmable high/low temperature alarms |
| Compliance | DIN 12876-1 (Class I/II), CE, UKCA |
| Brand | Grant Instruments (UK) |
|---|---|
| Origin | United Kingdom |
| Model | TC120 Series |
| Temperature Range | −20 °C to +100 °C |
| Stability | ±0.05 °C (DIN 12876 @ 70 °C) |
| Uniformity | ±0.1 °C (DIN 12876 @ 70 °C) |
| Setpoint Resolution | 0.1 °C |
| Built-in Circulation Pump | Max. 16 L/min, 210 mbar |
| Heating Power | 1.3 kW (230 V), 1.4 kW (120 V) |
| Safety Features | Adjustable overtemperature cut-off, low-level float switch, audible/visual alarm |
| Programming | 4 preset temperatures (1 active + 3 stored) |
| Display | 4-digit LED |
| Calibration | Two-point user calibration |
| Optional Accessories | ST-series stainless steel baths (5–38 L), P-series polypropylene baths (5–18 L), removable insulated lid, external probe interfaces (TXPEP/TXSEP) |
| Brand | Grant Instruments (Cambridge, UK) |
|---|---|
| Origin | United Kingdom |
| Model | TX150 Series |
| Temperature Range | –50 °C to +150 °C |
| Stability (DIN 12876 @ 70 °C) | ±0.01 °C |
| Uniformity (DIN 12876 @ 70 °C) | ±0.05 °C |
| Heating Power | 1.9 kW (230 V) |
| Max. Flow Rate | 17 L/min |
| Max. Pressure | 270 mbar |
| Language Options | English, French, German, Spanish, Italian |
| Brand | Grant Instruments (Cambridge) Ltd. |
|---|---|
| Origin | United Kingdom |
| Model | TXF200 Series |
| Temperature Range | −50 °C to +200 °C |
| Stability (DIN 12876, @70 °C) | ±0.01 °C |
| Uniformity (DIN 12876, @70 °C) | ±0.05 °C |
| Programmability | 10 programs × 100 steps |
| Internal Pump Flow Rate | up to 21 L/min (adjustable) |
| Max. Pump Pressure | 460 mbar |
| Heating Power | 2.0 kW (230 V), 1.5 kW (120 V) |
| Display | QVGA TFT color screen |
| Interface | USB & RS232 |
| Calibration | Dual-point user calibration for internal and external PT1000 probes |
| Safety | Adjustable overtemperature cutoff, low-level float switch protection, audible/visual alarms |
| Compliance | EN 61000-3-3 (harmonic emission), DIN 12876 (laboratory thermostats) |
| Brand | Grant |
|---|---|
| Origin | United Kingdom |
| Model | SAP12 |
| Bath Volume | 12 L |
| Temperature Range | Ambient +5 °C to 99 °C |
| Temperature Stability | ±0.2 °C @ 37 °C (per DIN 12876) |
| Control Type | Digital, Heating-Only |
| Circulation | Non-Circulating |
| Voltage Options | 120 V or 230 V AC |
| Power Rating | 0.77 kW (230 V) / 0.77 kW (120 V) |
| Over-Temperature Protection | Adjustable Cut-Off |
| Safety Certification | CSA Approved |
| Display | 3-digit LED |
| Preset Programs | 3 |
| Drain Valve | Yes |
| Brand | Grant |
|---|---|
| Origin | United Kingdom |
| Model | SAP5 |
| Bath Volume | 5 L |
| Temperature Range | Ambient +5 °C to 99 °C |
| Temperature Stability | ±0.2 °C @ 37 °C (per DIN 12876) |
| Control Type | Digital, Heating-Only |
| Circulation | Non-Circulating |
| Voltage Options | 120 V or 230 V AC |
| Power Rating | 0.375 kW (230 V), 0.13 kW (120 V) |
| Over-Temperature Protection | Adjustable Cut-Out |
| Safety Certification | CSA Approved |
| Display | 3-digit LED |
| Preset Programs | 3 |
| Drain Valve | Yes |
| Brand | Grant |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SBB AQUA 5/12/18/26 PLUS |
| Temperature Range | Ambient +5 °C to 100 °C |
| Power Supply | 220–240 V AC |
| Heating Power | 1.5 kW (SBB AQUA 5 & 12 PLUS), 2.0 kW (SBB AQUA 18 & 26 PLUS) |
| Capacity | 5 L / 12 L / 18 L / 26 L |
| Working Chamber Dimensions (L×W×D) | 270×215×385 mm / 270×390×385 mm / 270×570×385 mm / 300×570×385 mm |
| Safety Feature | Adjustable Over-Temperature Cut-Off Protection |
| Control Type | Analog Temperature Regulation |
| Standard Lid | Drip-Resistant Polycarbonate Cover |
| Brand | Grant |
|---|---|
| Origin | United Kingdom |
| Model | SUB Aqua Plus |
| Temperature Range | 5°C above ambient to 99°C |
| Temperature Setting Range | 10–99°C in 0.1°C increments |
| Temperature Stability (DIN 12876-1 | 2013) @ 37°C: ±0.2°C |
| Control Method | Digital PID control with microprocessor-based thermostat |
| Display | 3-digit high-brightness, wide-viewing-angle LED |
| Power Supply | 120 V or 230 V AC, 50/60 Hz selectable |
| Drain Valve | Integrated on models ≥12 L capacity |
| Heating Power | 0.13–2.1 kW (model-dependent) |
| Compliance | DIN 12876-1:2013 Class I (laboratory water baths), CE marked, RoHS compliant |
| Brand | Grant |
|---|---|
| Origin | United Kingdom |
| Model | TXF200 R |
| Temperature Range | –47 °C to +100 °C (refrigerated mode) |
| Stability | ±0.1 °C (DIN 12876, water @ 10 °C) |
| Uniformity | ±0.1 °C (DIN 12876, water @ 10 °C) |
| Max Flow Rate | 23 L/min (adjustable) |
| Max Pressure | 530 mbar |
| Display | QVGA TFT color screen |
| Calibration | Dual-point user recalibration (TXPEP/TXSEP probes) |
| Interface | USB & RS232 |
| Programming Capacity | 10 programs, up to 100 stages each |
| Safety Features | Adjustable overtemperature cutoff, low-level float switch protection, audible/visual high/low temperature alarms |
| Fluid Compatibility | Water, 50% water/50% ethylene glycol, and other non-corrosive heat transfer fluids |
| Compliance | DIN 12876-1:2018 (laboratory thermostats), CE, UKCA, RoHS, EMC Class B |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHJF-1250 |
| Instrument Type | Constant-Temperature Bath |
| Circulation Mode | Internal Circulation |
| Temperature Control | Refrigeration & Heating |
| Bath Volume | 50 L |
| Temperature Range | −120 °C to −60 °C |
| Temperature Stability | ±2 °C |
| Power Supply | 3-phase, 380 V, 50 Hz |
| Refrigeration Capacity | 700 W at −60 °C / 580 W at −80 °C / 420 W at −100 °C / 125 W at −120 °C |
| Max Flask Capacity | 20 L |
| Overall Power Consumption | 4876 W |
| External Dimensions (L×W×H) | 1340 × 820 × 1310 mm |
| Net Weight | 265 kg |
| Tank Material | 304 Stainless Steel + Polymer Anti-Corrosion Lining |
| Display | Digital LED with Keypad Input |
| Cabinet Finish | Cold-Rolled Steel with Electrostatic Powder Coating |