Balance/Scale
Filter
Showing 781–810 of 838 results
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Type | Analytical Balance |
| Capacity | 210 g / 60 g (dual-range) |
| Readability | 0.1 mg / 1 mg |
| Repeatability | ±0.1 mg / ±1 mg |
| Linearity | ±0.2 mg / ±2 mg |
| Calibration | External |
| Pan Diameter | Ø90 mm |
| Draft Shield Dimensions | 150 × 165 × 200 mm |
| Overall Dimensions | 365 × 223 × 338 mm |
| Compliance | ISO/IEC 17025-ready, GLP/GMP-supporting design |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Model | JJ100B / JJ200B |
| Instrument Type | Analytical Balance |
| Capacity | 110 g / 200 g |
| Readability | 0.001 g (1 mg) |
| Repeatability | ±0.001 g |
| Calibration Method | Manual internal calibration (100 g / 200 g standard weight required) |
| Pan Diameter | Ø105 mm |
| Dimensions (L×W×H) | 325 × 211 × 110 mm |
| Power Supply | AC 220 V ±10%, 50 Hz ±1 Hz |
| Operating Temperature | 0–40 °C |
| Operating Humidity | ≤80 % RH (non-condensing) |
| Interface | RS232 serial port |
| Tare Range | 0–110 g / 0–200 g |
| Verification Scale Interval (e) | 0.01 g (10d) |
| Construction | Aluminum alloy base with EMI-shielded internal housing |
| Features | Stainless steel weighing pan, 7-unit conversion (g, oz, ct, dwt, grain, lb, tl), piece counting (sample size: 1/10/20/50/100), underhook weighing capability, LCD display |
| Brand | Unicise |
|---|---|
| Origin | Jiangsu, China |
| Model Range | UBA324, UBA324-I, UBA424, UBA424-I, UBA524, UBA524-I |
| Capacity | 320–520 g |
| Readability | 0.1 mg |
| Repeatability (5% load) | ≤0.1 mg |
| Repeatability (full scale) | ≤0.2 mg |
| Linearity | ±0.1 mg |
| Stabilization Time | ≤1.5 s |
| Temperature Sensitivity Drift | ±0.5 ppm/K (10–30 °C) |
| Calibration | External and Internal (–I models) |
| Compliance | GLP/GMP-ready, FDA 21 CFR Part 11–compatible audit trail (-I models) |
| Communication | RS-232 (SBI protocol) & USB Type-C (SICS protocol) |
| Power | AC adapter or portable power bank support |
| Brand | Unicise |
|---|---|
| Origin | Jiangsu, China |
| Model(s) | UBP822, UBP1202, UBP2202, UBP3202, UBP4202, UBP5202, UBP6202 |
| Instrument Type | Analytical Balance |
| Capacity | 820 g – 6200 g |
| Readability | 10 mg |
| Repeatability (5% load) | 5 mg |
| Repeatability (full load) | 10 mg |
| Linearity | 6 mg |
| Stabilization Time | ≤ 0.9 s |
| Temperature Sensitivity Drift | ±2 ppm/K (10–30 °C) |
| Calibration Method | External |
| Communication Protocols | SBI (RS-232) & SICS |
| Compliance | GLP/GMP-ready data output (Device ID, Sample ID, Batch ID), password protection, minimum weight alert |
| Brand | Unicise |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model Numbers | UBI16001, UBI16001A, UBI35001, UBI35001A, UBI65001 |
| Instrument Type | Industrial Platform Balance |
| Max Capacity | 65,000 g |
| Readability | 50 mg to 100 mg |
| Calibration Method | External Calibration |
| Repeatability (at 5% full scale) | 20 mg to 50 mg |
| Repeatability (at full scale) | 50 mg to 100 mg |
| Linearity Error | 30 mg to 100 mg |
| Stabilization Time | ≤1.5 s |
| Display | Full-color capacitive touchscreen |
| Interfaces | DB9 (RS-232), USB Type-C |
| Communication Protocols | SBI (RS-232 compliant), SICS |
| Power Options | AC adapter or external power bank (5 V DC) |
| Built-in Applications | 12 preloaded functions including weighing, counting, checkweighing, peak hold, density determination, and more |
| Construction | Aluminum alloy base with stainless steel pan |
| Protection Rating | IP42 (dust and splash resistant) |
| Security | User password protection |
| Brand | Unicise |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Models | UBP223 / UBP223-I / UBP323 / UBP323-I / UBP423 / UBP423-I / UBP523 / UBP523-I / UBP623 / UBP623-I |
| Balance Type | Precision Analytical Balance |
| Capacity Range | 220 g – 620 g |
| Readability | 1 mg |
| Repeatability (5% load) | 0.5 mg |
| Repeatability (full load) | 1 mg |
| Linearity | ±0.6 mg |
| Stabilization Time | ≤1.0 s |
| Temperature Drift Sensitivity | ±2 ppm/K (+10 °C to +30 °C) |
| Calibration | External calibration (UBP-x23) |
| Compliance | GLP/GMP-compliant data output (Device ID, Sample ID, Batch ID), audit trail (3000 entries, immutable export), user management (3-tier, up to 11 users), minimum weight warning, SBI (RS-232) and SICS protocol support |
| Connectivity | DB9 serial port + USB Type-C |
| Power | AC adapter or external power bank (5 V DC) |
| Display | Full-color capacitive touchscreen with customizable hotkeys and LED key illumination |
| Construction | 316L stainless steel pan and baseplate |
| Built-in Applications | 12 functions including weighing, formulation, statistics, component analysis, density, percentage, unit conversion, animal weighing, checkweighing, peak hold, counting, and comparative mass analysis |
| Key | Brand: Unicise Precision Measurement |
|---|---|
| Origin | Jiangsu, China |
| Model Range | UBS35 / UBS35-I / UBS65 / UBS65-I / UBS125 / UBS125-I |
| Capacity | 30 g / 60 g / 120 g |
| Readability | 0.01 mg |
| Repeatability (5% load) | 0.01 mg (UBS35/UBS65), 0.02 mg (UBS125) |
| Repeatability (full load) | 0.02 mg (all models) |
| Linearity | 0.02 mg (UBS35/UBS65), 0.03 mg (UBS125) |
| Stabilization Time | ≤3.5 s |
| Temperature Sensitivity | ±0.5 ppm/K (10–30 °C) |
| Calibration | External or internal (I-series only) |
| Compliance | GLP/GMP-compliant data output, audit trail (I-series), user management (I-series), min-weight warning |
| Connectivity | DB9 (RS-232/SBI) & USB-C (SICS protocol) |
| Power | AC adapter or portable power bank |
| Key | Brand: Unicise Precision Measurement |
|---|---|
| Origin | Jiangsu, China |
| Model Range | UWM35-I / UWM65-I / UWM125-I / UWM35 / UWM65 / UWM125 |
| Capacity | 30 g / 60 g / 120 g |
| Readability | 0.01 mg |
| Repeatability | 0.02 mg |
| Preload Range | 0–10 g / 0–20 g / 0–40 g |
| Operating Temperature | +10 to +30 °C |
| Calibration | Internal (I-series) or External (non-I-series) |
| Sensor Housing Dimensions (L×W×H) | 265 × 114 × 90 mm |
| Electronics Box Dimensions (L×W×H) | 110 × 90 × 45 mm |
| Interface | DB9 (RS-232/SBI compliant) and USB Type-C |
| Environmental Rating | Designed for controlled lab and industrial automation environments |
| Brand | Unicise Precision Measurement |
|---|---|
| Origin | Jiangsu, China |
| Model Series | UWM223, UWM323, UWM423, UWM523, UWM623 |
| Capacity | 220 g to 620 g |
| Readability | 1 mg |
| Preload Range | 0–200 g (model-dependent) |
| Lower-Loading Interface | M3 threaded mounting holes |
| Calibration | External (standard) or Internal (‘-I’ variants) |
| Data Interfaces | DB9 (RS-232/485), Type-C, USB-A |
| Communication Protocols | SBI, SICS, RS-232, RS-485 |
| Housing | Full stainless steel |
| Overload Protection | Integrated mechanical stop |
| Status Indication | Dual-color LED status indicator |
| Brand | Unicise Precision Measurement |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Models | UMP64, UWM124, UWM224, UMP64-I, UWM124-I, UWM224-I |
| Price | Upon Request |
| Readability | 0.1 mg |
| Capacity | 60 g / 120 g / 220 g |
| Repeatability (SD) | 0.1 mg |
| Preload Range | 0–20 g / 0–40 g / 0–70 g |
| Interface | DB9, USB-C, USB-A |
| Communication Protocols | SBI (RS-232), SICS, RS-485 |
| Calibration | External (non-I models) or Internal (I-suffixed models) |
| Construction | Stainless Steel Housing |
| Mounting | Bottom-loading Configuration |
| Indicator | Dual-color LED Status Light |
| Brand | Unicise Precision Measurement |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Models | UWM2202, UWN3202, UWM4202, UWM6202, UWM8202 |
| Max Capacity | 2200–8200 g |
| Readability | 10 mg |
| Preload Range | 0–2500 g |
| Calibration | External (≥1/3 full scale recommended) |
| Operating Temperature | +10 to +30 °C |
| Housing | Stainless Steel |
| Power Supply | 220 V AC, 50–60 Hz / 5.6 V DC |
| Interfaces | DB9, Type-C, USB-A |
| Protocols | SBI (RS-232), SICS, RS-485 |
| Bottom-Loading Capability | Yes |
| Status Indication | LED Status Light |
| Optional Display | USB-connected weighing indicator |
| Brand | Unicise |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model Numbers | UWM16001, UWM16001A, UWM24001, UWM24001A, UWM32001, UWM32001A |
| Pricing | Upon Request |
| Capacity | 16 kg / 24 kg / 32 kg (selectable by model) |
| Readability | 100 mg |
| Preload Range | 0–5 kg / 0–8 kg / 0–10 kg (model-dependent) |
| Calibration | External, user-defined weight ≥1/3 full scale |
| Dimensions (module only) | 305 × 90 × 97.5 mm (L×W×H) |
| Standard Pan | Ø160 × 4 mm (H) |
| Bottom-Loading Interface | M6 threaded hole |
| Data Interfaces | DB9 (RS-232), Type-C (USB 2.0), USB-A |
| Communication Protocols | SBI (RS-232 compatible), SICS, RS-485 |
| Power Supply | 220 V AC, 50–60 Hz |
| Key | Brand: Unicise Precision Measurement |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | UMC22001C |
| Instrument Type | Comparative Balance |
| Max Capacity | 32 kg |
| Readability | 20 mg |
| Repeatability | 40 mg |
| Linearity | 60 mg |
| Eccentric Load Error | 5 mg/mm |
| Stabilization Time | 4 s |
| Calibration Method | External Calibration |
| Interface | DB9 (RS-232 compliant) & USB Type-C |
| Power Supply | AC adapter or external power bank compatible |
| Brand | Xingpu Technology |
|---|---|
| Model | WISDOM-01 |
| Origin | Imported |
| Weighing Range | 0.1000–20.0000 g |
| Resolution | 0.1 mg |
| Accuracy | ±0.0002 g |
| Sample Capacity | 21 positions per batch |
| Cycle Time | 45 s per sample (average) |
| Hopper Configuration | Dual independent hoppers |
| Weighing Modes | Manual, Fixed-mass, Ratio-based, and Dual-material sequential weighing |
| Sample Handling | Fully automated sampling, dispensing, and sorting |
| Dimensions (W×D×H) | 750 × 650 × 680 mm |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | FA-C Series |
| Instrument Type | Analytical Balance |
| Capacity Range | 100–220 g |
| Readability | 0.1 mg |
| Repeatability | 0.1 mg |
| Internal Calibration | Yes |
| Pan Diameter | 80 mm |
| Net Weight | 8 kg |
| Dimensions (W×D×H) | 350 × 215 × 340 mm |
| Working Height Under Draft Shield | 240 mm |
| Display | Backlit LCD |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | FA1004B |
| Instrument Type | Analytical Balance |
| Maximum Capacity | 100 g |
| Readability | 0.1 mg |
| Repeatability | ≤ ±0.1 mg |
| Pan Diameter | 80 mm |
| Clear Height Under Pan | 240 mm |
| Dimensions (W×D×H) | 350 × 215 × 340 mm |
| Net Weight | 7.5 kg |
| Power Supply | 220 V / 50 Hz |
| Display | Blue-backlit LCD (120 × 55 mm) |
| Interface | RS232C standard port |
| Calibration | External weight-based automatic calibration system |
| Environmental Protection | Four-sided electrostatic-shielded glass draft shield |
| Sensor Technology | Electromagnetic force compensation transducer |
| Linearity Correction | Four-point linear calibration |
| Functions | Tare, counting, unit conversion (g, oz, ct), adjustable integration time, stability/sensitivity tuning |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Analytical Balance |
| Capacity | 0–100 g |
| Readability | 0.1 mg |
| Repeatability | ≤ ±0.1 mg |
| Pan Diameter | Ø80 mm |
| Net Weight | 8 kg |
| Dimensions (W×D×H) | 350 × 215 × 340 mm |
| Packaging Dimensions | 480 × 375 × 515 mm |
| Working Height Under Draft Shield | 240 mm |
| Calibration Method | Internal Motorized Auto-Calibration |
| Interface | RS232C Serial Output |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Analytical Balance |
| Maximum Capacity | 220 g |
| Readability | 0.1 mg |
| Repeatability | 0.1 mg |
| Calibration Method | External Calibration |
| Pan Diameter | 80 mm |
| Working Height Under Draft Shield | 240 mm |
| Dimensions (W×D×H) | 350 × 215 × 340 mm |
| Net Weight | 7.5 kg |
| Power Supply | 220 V AC, 50 Hz |
| Display | Backlit LCD (120 × 55 mm) |
| Interface | RS232 standard port |
| Unit Options | g, oz, ct |
| Compliance | Patented design (CN ZL201020562335.X) |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model Series | FB Series |
| Instrument Type | Analytical Balance |
| Capacity Range | 100–220 g |
| Readability | 0.1 mg |
| Calibration Method | External Calibration |
| Max Capacity | 220 g |
| Repeatability | 0.1 mg |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | FB |
| Instrument Type | Analytical Balance |
| Maximum Capacity | 200 g |
| Readability | 0.1 mg |
| Repeatability | 0.1 mg |
| Calibration | Automatic Internal Calibration |
| Data Storage | 500 entries |
| User Management | Multi-user support |
| Operating Environment | Real-time sensor temperature display with automatic temperature compensation |
| Leveling | Front-mounted bubble level indicator |
| Enclosure | Patented circular glass draft shield with enhanced sealing |
| Key Interface | Full-surface tempered glass touch keypad (rated for ≥50,000 actuations) |
| Software | SUPERTEXT 1.0 — featuring animal weighing, density determination, formulation weighing, accumulation, checkweighing, percentage weighing, counting, and target weighing modules |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model Series | FB-C |
| Instrument Type | Analytical Balance |
| Capacity Range | 100–220 g |
| Readability | 0.1 mg |
| Internal Calibration | Yes |
| Maximum Capacity | 220 g |
| Repeatability | 0.1 mg |
| Accuracy Class | OIML Class I |
| Power Supply | DC 9 V / 1 A |
| Pan Diameter | 80 mm |
| Dimensions (W×D×H) | 360 × 220 × 350 mm |
| Net Weight (incl. packaging) | 8 kg |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | FB-C |
| Instrument Type | Precision Balance |
| Capacity Range | 200–500 g |
| Readability | 1 mg |
| Calibration Method | Internal Calibration |
| Max Capacity | 500 g |
| Measurement Accuracy | 1 mg |
| Repeatability | 1 mg |
| Accuracy Class | Class II (per OIML R76) |
| Pan Diameter | 90 mm |
| Dimensions (W×D×H) | 360 × 220 × 350 mm |
| Net Weight (incl. packaging) | 7.5 kg |
| Power Supply | DC 9 V / 1 A |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yoke Instrument Co., Ltd. |
| Type | Precision Balance |
| Capacity | 500 g |
| Readability | 1 mg |
| Calibration | External |
| Repeatability | ±1 mg |
| Accuracy Class | Class II (per OIML R76) |
| Pan Diameter | 90 mm |
| Dimensions (W×D×H) | 360 × 220 × 350 mm |
| Net Weight (incl. packaging) | 7.5 kg |
| Power Supply | DC 9 V / 1 A |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yoke Instrument Co., Ltd. |
| Model | GC Series |
| Maximum Capacity | 220 g |
| Readability | 0.1 mg |
| Accuracy Class | Class I (OIML R76) |
| Calibration | External |
| Repeatability | ±0.1 mg |
| Weighing Pan Diameter | 90 mm |
| Dimensions (W×D×H) | 360 × 220 × 350 mm |
| Net Weight (incl. packaging) | 7.5 kg |
| Power Supply | DC 9 V / 1 A |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yoke Instrument Co., Ltd. |
| Type | Precision Balance |
| Capacity Range | 100–500 g |
| Readability | 1 mg |
| Accuracy Class | Class II (per OIML R76) |
| Calibration | External |
| Repeatability | ±1 mg |
| Pan Diameter | 90 mm |
| Dimensions (W×D×H) | 360 × 220 × 350 mm |
| Net Weight (incl. packaging) | 7.5 kg |
| Power Supply | DC 9 V / 1 A |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yoke Instrument Co., Ltd. |
| Model | GC-C Series |
| Capacity | 100–220 g |
| Readability | 0.1 mg |
| Calibration | Internal |
| Accuracy Class | Class I (OIML R76) |
| Repeatability | ±0.1 mg |
| Pan Diameter | 80 mm |
| Dimensions (W×D×H) | 360 × 220 × 350 mm |
| Weight (incl. packaging) | 8 kg |
| Power Supply | DC 9 V / 1 A |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yoke Instrument Co., Ltd. |
| Type | Precision Balance |
| Capacity Range | 100–500 g |
| Readability | 1 mg |
| Accuracy Class | Class II (per OIML R76) |
| Repeatability | ±1 mg |
| Pan Diameter | 90 mm |
| Dimensions (W×D×H) | 360 × 220 × 350 mm |
| Net Weight (incl. packaging) | 7.5 kg |
| Power Supply | DC 9 V / 1 A |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GC-C203 |
| Instrument Type | Precision Balance |
| Capacity | 200 g |
| Readability | 0.001 g (1 mg) |
| Internal Calibration | Yes |
| Display | Backlit BTN black-matrix LCD |
| Weighing Functions | Counting, Percentage Weighing, Dual-Range Mode, Unit Conversion (g, oz, ct, etc.) |
| Construction | Sealed draft shield enclosure |
| Sensor Technology | Electromagnetic force compensation sensor with CNC-machined components |
| Microprocessor | ARM32-bit embedded controller |
| Signal Processing | Digital filtering and adaptive data smoothing algorithms |
| PCB Assembly | SMT (Surface Mount Technology) |
| Compliance | Designed to meet ISO 9001 manufacturing standards |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yoke Instrument Co., Ltd. |
| Type | Analytical Balance |
| Capacity | 5–20 g (model-dependent), up to 200 g |
| Readability | 0.01 mg (10 µg) |
| Repeatability | 0.01 mg |
| Calibration | External |
| Max Capacity | 50 g / 100 g / 200 g (by model) |
| Linearity Error | ±0.5e (0 ≤ m ≤ 50 g), ±1.0e (50 g < m ≤ 200 g), ±1.5e (m > 200 g) |
| Stabilization Time | ~13 s (0.01 mg mode), ~4 s (0.1 mg mode) |
| Pan Diameter | Φ80 mm |
| Dimensions (W×D×H) | 350 × 210 × 346 mm |
| Power Supply | 12 V DC / 1000 mA |
| Power Consumption | 12 W |
| Net Weight | 8.5 kg |
| Warm-up Time | 30 min (recommended for initial use) |
| Brand | Yoke |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-made) |
| Model Series | GL Series |
| Instrument Type | Analytical Balance |
| Capacity Range | 100–220 g |
| Readability | 0.1 mg |
| Repeatability | 0.1 mg |
| Calibration Method | External Calibration |
| Pan Diameter | 80 mm |
| Working Height Under Draft Shield | 240 mm |
| Dimensions (W×D×H) | 350 × 215 × 340 mm |
| Net Weight | 7.5 kg |
| Power Supply | 220 V / 50 Hz |
| Display | Backlit LCD (120 × 55 mm) |
| Interface | RS232 standard port |
| Unit Conversion | g, oz, ct |
| Compliance | Patented design (ZL201020562335.X) |