Cole-Parmer
Filter
Showing 1–30 of 58 results
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 03145-05 |
| Temperature Range | −13 °C to 99 °C (relative to ambient) |
| Temperature Resolution | 1 °C |
| Timer Range | 1 min to 99 h 59 min or continuous |
| Orbit Diameter | 3 mm |
| Heating Rate | 5 °C/min |
| Cooling Rate (above ambient) | 2–3 °C/min |
| Cooling Rate (below ambient) | 0.5–1 °C/min |
| Speed Range (0.5 mL block) | 300–1500 rpm |
| Speed Range (all other blocks) | 300–1400 rpm |
| Temperature Accuracy | ±0.5 °C (20–45 °C) |
| Programmable Modes | 2 stored protocols (standard + continuous) |
| Display | Digital LED with setpoint/actual readout |
| Interface | RS-232 for data export |
| Block Compatibility | Interchangeable heated/cooled blocks including microplate support |
| Vortex Mode | Short-pulse vortex activation |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 04714-51 |
| Output Power | 130 W |
| Frequency | 20 kHz |
| Probe Tip Diameter | 6 mm |
| Sample Volume Range | 10–50 mL |
| Dimensions (L×W×H) | 115 × 250 × 320 mm |
| Net Weight | 3 kg |
| Timer Range | 1 s – 10 min (digital) |
| Pulse Mode | On/Off cycles adjustable from 0.1 s to 10 s each |
| Transducer Type | CV18 PZT piezoelectric converter (Ø32 mm × 146 mm, 340 g) |
| Probe Material | Ti-6Al-4V titanium alloy |
| Input Voltage | 220 V / 50 Hz |
| Display | 3-digit LCD wattmeter |
| Remote Control | Footswitch interface provided |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 05611-21 |
| Flow Range | 0.26–8 GPM |
| Accuracy | ±0.5% of reading |
| Viscosity Range | 1–1000 cP |
| Operating Temperature | −5 to 55 °C (23 to 131 °F) |
| Max Pressure | 1500 psi |
| Wetted Materials | Acetal, aluminum, steel, nitrile |
| Power Supply | Two AAA batteries |
| Battery Life | 2000 hours |
| Display | 6-digit LCD |
| Connection | 1/2" NPT(F) |
| Units | gal, L, qt, pt |
| Output | Local display only (no pulse or remote output) |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 05627-71 (85–264 VAC, 50–60 Hz), 05627-73 (12–24 VDC ±10%) |
| I/O Capacity | Up to 6 input modules, 2 relay cards (4 relays total), 1 dual-channel analog output card (4–20 mA / 0–5 V / 0–10 V), optional RS-232 communication card |
| Display | Dual-line, 16-character alphanumeric backlit LCD |
| Units | 30 built-in engineering units (flow, pressure, level, volume, pH, ORP, conductivity) |
| Accumulation | Resettable and non-resettable flow totalizers |
| Programming | Front-panel 4-button keypad |
| Compliance | CE-marked |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 05628-00 |
| Power Supply | 12–24 V AC/DC, 50/60 Hz |
| Display | 2-line × 16-character alphanumeric LCD with backlight |
| Relays | 2 × SPDT (5 A @ 250 V AC / 30 V DC) |
| Analog Output | 4–20 mA (non-isolated) |
| Pulse Output | EOB (End-of-Batch) for remote start/stop/resume |
| Input Frequency Range | 5–1000 Hz (optically isolated) |
| Operating Temperature | –10 to 55 °C (14 to 131 °F) |
| Enclosure Dimensions | 89 mm × 89 mm × 89 mm (3.5" × 3.5" × 3.5") |
| Mounting | Panel-mount with included bracket and adhesive template |
| Memory | Non-volatile EEPROM for configuration retention during power loss |
| Brand | Cole-Parmer |
|---|---|
| Model | 05629-22 (Battery-Powered) / 05629-40 (AC/DC-Powered) |
| Accuracy | ±0.5% of reading |
| Display | Upper 4-digit LCD (flow rate), Lower 8-digit LCD (totalizer) |
| Power | 05629-22 — dual internal lithium batteries (4-year nominal life) |
| Dimensions | 05629-22 — 3.875" W × 3.875" H × 3.875" D |
| Operating Temperature | –10 to 55 °C (14 to 131 °F) |
| Relay Output | 2 SPDT, 125 VAC / 30 VDC, 5 A max |
| Analog Output | 4–20 mA (non-isolated) |
| Pulse Output | Optically isolated, sink current ≤5 mA |
| Display Update Rate | 200 ms |
| Hysteresis | 2% of setpoint |
| Sensor Compatibility | Roto-X and Metalex flow sensors only (Roto-X low-flow sensors excluded) |
| Environmental Rating | NEMA 4X-rated enclosure (IP65 equivalent) |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 25755-xx |
| Density Range (25755-00/14) | 0.750–1.000 g/cm³ |
| Density Range (25755-04/20) | 1.000–1.300 g/cm³ |
| Density Range (25755-10) | 1.300–1.600 g/cm³ |
| Density Resolution | 0.001 g/cm³ |
| Density Accuracy | ±0.03 g/cm³ |
| Temperature Range (°C models) | 0–50 °C |
| Temperature Range (°F models) | 32–120 °F |
| Temperature Resolution | 0.1 °C or 0.1 °F |
| Temperature Accuracy | ±0.8 °C / ±0.5 °F |
| Max Sample Viscosity | 400 cP |
| Probe Immersion Depth | 5 in (127 mm) |
| Display | Dual-line backlit LCD |
| Power | 4 × AA batteries (included) |
| Probe Dimensions | 8 in L × 1.25 in dia (203 mm × 32 mm) |
| Instrument Dimensions | 4 in W × 8.25 in H × 1.5 in D (102 mm × 210 mm × 38 mm) |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 36050-05 |
| Operating Temperature | 760°C (1400°F) |
| Length | 0.6 m |
| Width | 1.3 cm |
| Power Rating | 156 W |
| Voltage | 120 VAC |
| Construction | Dual resistive elements knitted in series, insulated with high-temp Samox® fiberglass braid |
| Safety Note | Non-overlapping installation required |
| Termination | Reusable tie-down ends, 0.6 m integrated power cord |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 38000-X |
| Capacity Options | 8.32 mL (US), 83.2 mL (US), 100 mL (UK) |
| Volume Tolerance | ±1.2% (38000-02), ±0.5% (all other variants) |
| Tare Accuracy | ±0.2 g (8.32 mL cup), ±0.1 g (38000-02 variant) |
| Compliance | MIL-STD-45662A |
| Calibration Certificate | Optional (38000-16, 38000-26) |
| Material | 316 stainless steel |
| Dimensions | 26.5 × 25.4 mm (38000-02), 63.5 × 44.5 mm (38000-12/16), 78.3 × 44.5 mm (38000-22/26) |
| Water Mass at Fill | 47 g (8.32 mL), 213 g (83.2 mL), 243 g (100 mL) |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 38000-xx |
| Capacity | 8.32 mL (38000-00) / 83.2 mL (38000-10, 38000-14) / 100 mL (38000-20, 38000-24) |
| Tolerance | ±1.2% (38000-00) / ±1.5% (38000-10/14/20/24) |
| Height | 26.5 mm (38000-00) / 63.5 mm (38000-10/14) / 78.3 mm (38000-20/24) |
| Outer Diameter | 25.4 mm (38000-00) / 44.5 mm (38000-10/14/20/24) |
| Weight | 47 g (38000-00) / 213 g (38000-10/14) / 243 g (38000-20/24) |
| Standard Compliance | ASTM D189, ASTM D524, DIN 51709, IP 14, ISO 10370 |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 44175-00 |
| Temperature Range | −10 to 100 °C |
| Temperature Accuracy | ±1 °C |
| Timer Function | Up to 30 days with audible alarm |
| Data Storage | Built-in memory |
| Interface | RS232 (IBM PC compatible) |
| Power Supply | 100–232 V AC |
| Standard Configuration | Main unit + 12 V DC power supply (modules sold separately) |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 44175-xx |
| Temperature Range | −10 °C to 100 °C (1 °C increment) |
| Temperature Accuracy | ±1 °C |
| Mixing Speed | 200–1000 rpm |
| Heating Rate | 4 °C/min |
| Cooling Rate | 2 °C/min (from ambient to 100 °C), 1 °C/min (from ambient to −10 °C) |
| Timer Range | 1 min to 30 days with audible alarm and auto-shutdown |
| Programmable Protocols | 5 stored programs, up to 10 steps per program (temperature, time, speed) |
| Auto-repeat | 1–99 cycles |
| Communication Interface | RS-232 |
| Power Input | 100–240 V AC |
| Brand | Cole-Parmer |
|---|---|
| Model | 601SP |
| Detection Range | 100–3000 ppm CO₂ |
| Origin | Japan |
| Tube Type | Colorimetric Gas Detection Tube |
| Application | Compressed air systems (cylinders, tanks, pipelines) |
| Packaging | Single tube, individually sealed |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 74900-25 |
| Pump Type | Microfluidic Syringe Pump |
| Flow Rate Range | 0.001 µL/h to 147 mL/min |
| Accuracy | ±0.5% |
| Repeatability | ±0.2% |
| Syringe Capacity | 10 µL to 140 mL |
| Plunger Speed | 9.5 × 10⁻⁶ mm/min (min) |
| Maximum Force | 40 lbf |
| Communication Interface | RS-232 |
| Display | Backlit LCD with alphanumeric interface |
| Power Supply | Included 6-ft grounded AC cord |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 74900-05 (Single-Channel), 74900-15/74900-25/74900-65/74901-05 (Dual-Channel), 74900-35/74900-45/74900-85/74901-15 (10-Channel) |
| Accuracy | ±0.5% |
| Repeatability | ±0.1% |
| Flow Rate Range (Single) | 0.2 µL/h–500 mL/h |
| Flow Rate Range (Dual/10-Channel) | 1 nL/h–147 mL/min |
| Syringe Capacity | 10 µL–140 mL |
| Linear Force | 9.1 kg (Single), 18.1 kg (Dual/10-Channel) |
| Power Supply | 230 V, 50/60 Hz |
| Certifications | CE |
| Interface | RS232, TTL I/O (Programmable Models) |
| Dimensions (L×W×H, cm) | 23×10×15 (Single), 28×12.7×23.5 (Dual), 28×15.2×30.5 (10-Channel) |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 7490005 |
| Flow Rate Range | 0.2 µL/hr to 500 mL/hr |
| Syringe Compatibility | 10 µL – 60 mL |
| Accuracy | ±0.5% |
| Repeatability | ±0.2% |
| Bidirectional Operation | Yes |
| Communication Interfaces | RS232, TTL, Analog Voltage/Current Output |
| Sterilizable Components | 316 Stainless Steel Syringe Body |
| Pulse Mode | Supported |
| Footswitch Compatible | Yes |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 81200-15 |
| Product Type | Automated Polarimeter |
| Temperature Control | None |
| Display | Backlit Color LCD |
| Light Source | LED with 589 nm filter |
| Sample Tube Options | 100 mm and 200 mm included |
| Data Storage | Last 30 measurements |
| Interface | RS-232 |
| Calibration Method | Quartz plate or reference standard |
| Compliance | Designed for GLP-compliant environments |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 81973-20 |
| Instrument Type | Portable |
| Detection Target | CO₂ (multi-component capable) |
| Range | 0–50,000 ppm (0–5% v/v) |
| Resolution | 100 ppm (0.01%) |
| Accuracy | ±5% of reading or ±50 ppm, whichever is greater |
| Response Time | < 60 s (T₉₀) |
| Zero Drift | < ±20 ppm/week |
| Span Drift | < ±2% of full scale/month |
| Operating Temperature | 0–50 °C |
| Battery Life | 8 h (NiCd rechargeable) |
| Weight | 0.7 kg |
| Dimensions | 66.7 × 139.7 × 20.6 mm (L × H × W) |
| Data Storage | 850 records (non-volatile memory) |
| Communication | IR interface + RS232 (optional cable 81973-60) |
| Alarm | Visual (LED) and audible (variable-tone) at user-configurable thresholds (e.g., 5,000 ppm intermittent / 10,000 ppm continuous) |
| Sensor Type | Dual-wavelength non-dispersive infrared (NDIR) with integrated pressure & temperature compensation |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 86494-15, 86494-25, 86494-35, 86494-40, 86494-45 |
| Type | Portable |
| Detection Targets | O₂, CO, CO₂, NO, NO₂, NOₓ, SO₂, Draft Pressure, Flue Gas Temperature, Ambient Temperature |
| O₂ Range | 0–25% vol (0.1% res, ±0.2% vol) |
| CO Range | 0–8000 ppm (1 ppm res |
| CO₂ Range | 0–99.9% vol (0.1% res) |
| NO Range | 0–4000 ppm (1 ppm res |
| NO₂ Range | 0–1000 ppm (1 ppm res |
| SO₂ Range | 0–4000 ppm (1 ppm res |
| NOₓ Range | 0–5000 ppm (1 ppm res) |
| Draft Pressure | ±0–40" H₂O (0.001" H₂O res, ±5% of reading) |
| Flue Gas Temp | –23 to 1000°C (0.1°C res, ±1°C) |
| Ambient Temp | –23 to 100°C (0.1°C res, ±1°C) |
| Combustion Efficiency | 0–100% (0.1% res) |
| Exhaust Flow | ≥1.00 (0.01 res) |
| Fuel Library | 10 preloaded fuels (natural gas, propane, butane, No. 2/4/6 fuel oil, wood, coal) |
| Data Logging | Up to 600 records |
| Power | Rechargeable battery + AC adapter (9 hrs operation without printing) |
| Communication | RS-232 (86494-15/-25), USB (86494-35/-40/-45) |
| Included | Dual-channel sampling hose (10 ft), 12" metal probe, factory-calibrated sensors, calibration certificate, non-thermal printer paper, rubber feet, carrying case |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 81250-10 |
| Product Type | Automatic Polarimeter |
| Temperature Control | Yes (external probe) |
| Digital Display | Yes |
| Light Source | LED with interference filter (589.3 nm) |
| Optical Path Diameter | 4 mm |
| Sample Cell Length Range | 20–220 mm |
| Optical Density Range | 0.0–3.0 OD |
| Angular Measurement Range | −355° to +355° |
| ISS Scale Range | −225°Z to +225°Z |
| Angular Resolution | 0.01° / 0.001° (selectable) |
| ISS Resolution | 0.01°Z / 0.001°Z (selectable) |
| Repeatability | ±0.002° (angle), ±0.005°Z (ISS) |
| Accuracy | ±0.01° (angle), ±0.03°Z (ISS) |
| Measurement Time | 4–30 s (adjustable) |
| Operating Temperature Range | 5–40 °C |
| Temperature Compensation Modes | None / Sucrose / Quartz / User-defined |
| Display Languages | English, French, Spanish, German |
| Interface | Dual RS-232 ports, parallel printer port |
| Power Supply | 90–250 VAC, 50–60 Hz |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 25750-60 |
| Density Range | 0–3 g/cm³ (or SGU) |
| Density Resolution | 0.01 g/cm³ (or SGU) |
| Temperature Range | 0–40 °C |
| Temperature Resolution | 0.1 °C |
| Sample Volume | 2 mL |
| Dimensions | 14.0 × 13.6 × 2.5 cm |
| Power | 1.5 V AA battery |
| Interface | Infrared output |
| Data Storage | 1024 readings |
| Display | Large LCD showing density, specific gravity, % concentration, and sample temperature |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 36402-09 |
| Temperature Range | Ambient to 130 °C |
| Temperature Uniformity | ±0.3 °C |
| Input Voltage | 230 V AC |
| Power Rating | 150–400 W (model-dependent) |
| Module Capacity | Single-module configuration |
| Heating Module Depth | 2.8 cm (03137-00 only) |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 86384-05, 86384-15 |
| CO₂ Range | 0–5000 ppm |
| CO Range (86384-15 only) | 0–500 ppm |
| RH Range | 5–95% |
| Temperature Range | 0–60 °C |
| CO₂ Resolution | 1 ppm |
| CO Resolution | 0.1 ppm |
| RH Resolution | 0.1% |
| Temp Resolution | 0.1 °C / 0.1 °F |
| CO₂ Accuracy | ±3% of reading or ±50 ppm |
| CO Accuracy | ±3% of reading or ±3 ppm |
| RH Accuracy | ±2% |
| Temp Accuracy | ±0.6 °C (±1.0 °F) |
| Data Storage Capacity (86384-15) | 26,900 timestamped records |
| Power | 4 × AA batteries or 115 VAC adapter (included with 86384-15) |
| Operating Ambient Temp | 5–70 °C |
| Dimensions | 10.2 × ? × 3.8 cm (L × H × W |
| Weight | 0.4 kg (86384-05), 0.5 kg (86384-15) |
| Software | LogDat 2™ for Windows (≥3.1), LogDat 2 Companion for Excel |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model Numbers | 74906-00, 74906-01, 74906-02, 74906-03, 74906-04 |
| Drive Type | 12-Roller Head |
| Speed Range | 0–150 rpm |
| Speed Accuracy | ±1.26% |
| Tube ID Compatibility | 0.13–2.79 mm |
| Max Flow Rate | 10.35 mL/min (with 2.79 mm ID tube at 150 rpm) |
| Tube Materials | PVC, Solva® Hydrocarbon-Resistant Tubing |
| Max Fluid Temperature | 52°C |
| Power Input | 90–240 VAC, 50/60 Hz |
| Dimensions (L×W×H) | 9.5 × 9.5 × 14 cm |
| Connectivity | USB 2.0, Ethernet, Wi-Fi (via local network), iOS/Android remote app (RDP-compatible) |
| Brand | Cole-Parmer |
|---|---|
| Model | 36630-00 |
| Origin | USA |
| Instrument Type | Benchtop |
| Temperature Range | −30 °C to +150 °C |
| Stirring Speed | 350–1200 rpm |
| Independent Reaction Vessels | 10 |
| Vessel Volume Capacity | 1–25 mL |
| Temperature Resolution | 0.01 °C |
| Temperature Accuracy | ±0.5 °C |
| Stirring Speed Resolution | 1 rpm |
| Stirring Speed Accuracy | ±10 rpm |
| Max Heating/Cooling Rate | 5 °C/min |
| Inter-vessel Temp Differential | Up to 180 °C |
| Optional Accessories | Reflux condensers, inert gas/vacuum manifolds, multi-channel NIR probes (Clarity System), Multi-Temp10 thermal control module, Integrity software suite |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 78190-00, 78190-02, 78190-04 |
| Drive Speed | 340 rpm |
| Flow Range (per channel) | 4–200 µL/min (ID 0.51 mm tubing) |
| Pulsation Reduction | 8-roller head design |
| Repeatability | ±5% |
| Programmable Steps | up to 99 per program |
| Interval Timing | 1–99 s per step |
| Dimensions (L×W×H) | 14 × 18 × 12.2 cm |
| Power Input | 100–240 VAC, 50/60 Hz |
| Standard Accessories | Foot switch, power cord |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Laboratory Equipment |
| Model | L/S Series |
| Instrument Type | Peristaltic Pump |
| Flow Rate Range | 0.1–3400 mL/min |
| Speed Range | 0.1–600 rpm |
| Accuracy | ±0.1% (digital precision models) |
| Drive Options | Analog, Digital, Programmable, Bidirectional |
| Pump Head Configurations | Single- to Multi-Channel |
| Tubing Compatibility | Standard L/S-sized silicone, Viton®, Tygon®, C-Flex®, PharMed® BPT |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Housing Material | Brass |
| Connection | 1/4" NPT |
| Max Flow Capacity | 2.11 GPM |
| Rotor Material | Plastic |
| Self-Cleaning Feature | Yes |
| Viewing Angle | 360° |
| Tube Material | Borosilicate Glass |
| Calibration | Liquid (Water @ 20°C) |
| Accuracy | ±5% FS |
| Operating Temperature | ≤80°C |
| Pressure Rating | ≤150 psi |
| Compliance | ASTM D1947, ISO 4064-3 (for mechanical flow indication principles) |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 32648-00 |
| Pricing | Upon Request |
| Sensor Principle | Thermal Mass Flow Measurement (Constant Temperature Anemometry) |
| Accuracy | ±1.0% FS (≤15 SLPM), ±1.5% FS (>15 SLPM) |
| Repeatability | ±0.5% FS |
| Response Time | 2 s |
| Operating Temperature | 0–50 °C |
| Max System Pressure | 500 psi (3.4 MPa) |
| Max Particle Size | 5 µm |
| Leak Rate | ≤1 × 10⁻⁷ sccs He |
| Output Signals | 0–5 VDC and/or 4–20 mA |
| Display | Removable 3.5-digit LCD, 90° rotatable |
| Housing Options | Anodized Aluminum or 316 Stainless Steel |
| Wetted Materials | Anodized Al / Brass / Viton® (Al housing) |
| Interface Sizes | 1/4" compression (≤50 SLPM), 3/8" (100–200 SLPM), 1/2" (500 SLPM), 3/4" female NPT (1000 SLPM) |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model Numbers | 32708-00, 32708-22, 32708-32 |
| Flow Range | 0–50 sccm (32708-00) |
| Accuracy | ±1.5% of Full Scale (FS), including linearity |
| Repeatability | ±0.5% FS |
| Response Time | ≤2 sec (to ±2% of setpoint, 25–100% FS step) |
| Operating Pressure | 5–40 psia (inlet) |
| Max system pressure | 150 psi |
| Temperature Range | 10–50°C ambient |
| Gas temp | 18–25°C nominal |
| Input/Output | 0–5 VDC analog control signal (input for valve actuation |
| Wetted Materials | Anodized aluminum, 316 stainless steel, brass, PTFE, acetal |
| Display | 3½-digit LCD (tiltable up to 90°), optional on models 32708-2x and 32708-3x |
| Gas Selection | DIP-switch configurable for Air, He, or Ar (factory-calibrated) |
| Power/IO Cable | Integrated 3-in-1 cable (power + 0–5 V input + 0–5 V output) |
| Pressure Drop | ≤15 psi at full scale flow |
| Compliance | Designed for use in general industrial process control environments |