Eijkelkamp
Filter
Showing all 16 results
| Brand | Eijkelkamp |
|---|---|
| Origin | Netherlands |
| Model | 01.11.SE |
| Weight | 29 kg |
| Max Sampling Depth | 5 m |
| Auger Diameter | 7 cm |
| Connection Type | Pin-lock coupling |
| Sample Type | Disturbed (non-intact) soil |
| Handle | Ergonomic reversible rotary handle |
| Included Augers | 4× Edelman augers (for clay, sand, coarse sand, and mixed soils), 1× Riverside auger, 1× stony-soil auger, 1× spiral auger, 1× semi-circular gouge auger |
| Accessories | Fiberglass multi-purpose probe with audible depth indicator, calibrated measuring tape with acoustic feedback, aluminum transport case, portable backpack, maintenance tools |
| Brand | Eijkelkamp |
|---|---|
| Origin | Netherlands |
| Model | 01.11.SO |
| Weight | 26 kg |
| Max Sampling Depth | 5 m (extendable to 8–10 m with extension rods) |
| Auger Bit Diameter | 7 cm |
| Connection Type | Pin-lock coupling |
| Sample Types | Undisturbed and disturbed soil cores |
| Core Components | Four Edelman augers (clay, sand, gravel, composite), Riverside auger, gravel auger, spiral auger, piston sampler, semi-circular gouge auger |
| Accessories | Fiberglass multi-purpose probe rod, depth gauge tape, push-pull handle, maintenance tools, field logbook, aluminum transport case |
| Brand | Eijkelkamp |
|---|---|
| Origin | Netherlands |
| Model | 04.02.SC |
| Weight | 15 kg |
| Maximum Sampling Depth | 5 m |
| Core Diameter | 3 cm |
| Sample Length per Insertion | 100 cm |
| Sampling Type | Intact Cylindrical Soil Core |
| Connection Type | Threaded Coupling |
| Configuration | Single-tube, manual operation |
| Brand | Eijkelkamp |
|---|---|
| Model | 04.15.SB |
| Sampling Depth | 7 m |
| Core Diameter | 37 mm |
| Core Length | 22 cm |
| Construction | Stainless Steel |
| Liner Material | Disposable/Reusable Polyethylene Sleeve |
| Connection Type | Threaded Coupling |
| Included Accessories | Edelman Auger, Riverside Auger, T-Handle, Extension Rods, Push-Pull Handle, Sampling Tubes with Sample Cylinders, Liners, Maintenance Tools, Aluminum Transport Case |
| Origin | Netherlands |
| Brand | Eijkelkamp |
|---|---|
| Origin | Netherlands |
| Model | 04.16 |
| Sampling Depth | 5 m |
| Sampling Diameter | 40 mm (outer) × 38 mm (inner) |
| Sampling Length | 200 mm |
| Sample Volume | 226 mL |
| Material | Full stainless steel (316 SS contact surfaces) |
| Compliance | NEN 5743 |
| Core Configuration | Edelman-type pre-augering drill + vacuum-assisted stainless steel coring tube with valve-sealed base, removable liner, insulating plate, bottom cap, sample extruder, and maintenance tools |
| Transport Case | Anodized aluminum carrying case |
| Brand | Eijkelkamp |
|---|---|
| Origin | Netherlands |
| Model | 05.02 |
| Weight | 27 kg |
| Max Sampling Depth | 2 m |
| Sample Diameter | 8 cm |
| Sample Length | 15 cm |
| Connection Type | Threaded Coupling |
| Sampling Type | Intact Soil Core |
| Standard Drills Included | Edelman Drill (10 cm Ø), Riverside Drill |
| Accessories | Extension Rods, Fiberglass Multi-Purpose Probe, Maintenance Tools, Field Logbook, Scraper, Aluminum Transport Case |
| Brand | Eijkelkamp |
|---|---|
| Origin | Netherlands |
| Model | 05.07 |
| Weight | 84 kg |
| Maximum Sampling Depth | 1 m |
| Core Dimensions | 100 cm length × 93 mm diameter |
| Power Source | Gasoline-driven percussion hammer |
| Core Retrieval | Split-barrel, hinged side-wall design |
| Standard Accessories | Percussion hammer, split-core barrel with hinge mechanism, extension rods, lever-assisted lifting device, 10 cm Edelman auger, T-handle, cutting head extraction hook, scraper, brush, gloves, maintenance kit, and sample storage components |
| Soil Compatibility | Suitable for cohesive, granular, and moderately compacted soils |
| Brand | Eijkelkamp |
|---|---|
| Origin | Netherlands |
| Model | 07.53.SA |
| Sampling Depth | 2 m |
| Sample Dimensions | Ø53 × 50 mm (H), Volume: 100 cm³ |
| Connection Type | Pin-lock coupling |
| Ring Holder Type | Open-frame design |
| Standard Kit Includes | 1 open-frame ring holder, 1 Edelman auger, 1 Riverside auger, ergonomic handle, extension rods, 24 stainless steel sampling rings (Ø53 mm), accessories, and carrying backpack |
| Brand | Eijkelkamp |
|---|---|
| Model | 08.13 |
| Power Supply | 90–264 VAC input (worldwide compatible) with interchangeable plugs |
| Motor | 12/24 VDC |
| Sieve Assembly | 8-position aluminum sieve holder with standardized 39 × 39 mm sieves (0.250 mm aperture, 10.2 cm² active area) |
| Sample Container | Aluminum canisters (62.5 × 44 mm) |
| Operating Principle | Wet-sieving under controlled vertical oscillation |
| Compliance | Designed for ASTM D6913, ISO 10930, and USDA-NRCS soil structure protocols |
| Brand | Eijkelkamp |
|---|---|
| Model | 08.16 |
| Compliance | NEN 5753, ISO/DIS 11277 |
| Configuration | Desktop (08.16.SA) or Wall-Mounted (08.16.SB) |
| Sample Capacity | 7 simultaneous analyses |
| Maximum Insertion Depth | 340 mm |
| Thermal Control | Integrated heater with thermostat and stirrer |
| Key Components | Glass sedimentation tank, pipette upper/lower assemblies, rubber bulb, glass sample cylinders, silicone stoppers, sodium hexametaphosphate dispersant |
| Brand | Eijkelkamp |
|---|---|
| Origin | Netherlands |
| Model | 08.53 |
| Measurement Range | 0 – >200 g/kg CaCO₃ |
| Resolution | Not specified |
| Power Supply | 220 V AC |
| Dimensions | 146 × 62 × 59 cm |
| Sample Capacity | 5 parallel determinations |
| Compliance | EN 5757, DIN 19682 & DIN 19684 |
| Principle | Scheibler volumetric acid–carbonate reaction |
| Brand | Eijkelkamp |
|---|---|
| Origin | Imported (Netherlands) |
| Model | 99.07 |
| Dimensions | 29 × 17 × 3 cm |
| Head Type | Dual-head (flat and pointed, interchangeable or dual-sided) |
| Head Material | Solid stainless steel, monolithic construction |
| Handle Material | Textured polymer, ergonomically contoured |
| Grip Design | Non-slip, vibration-dampening surface |
| Supplier Type | Authorized distributor |
| Brand | Eijkelkamp |
|---|---|
| Origin | Netherlands |
| Model | Beeker |
| Sampling Depth | Up to 1.5 m (standard) |
| Sample Diameter | 57 mm |
| Sample Length | 100 cm (adjustable to 150 cm) |
| Core Tube | Transparent PVC, Ø63×57 mm |
| Operating Water Depth | ≤5 m (standard) |
| Sample Compression Rate | ≤5% |
| Cutting Head | Rubber-sealed, piston-assisted |
| Vacuum & Pneumatic Actuation | Integrated mini vacuum pump & pressure pump (battery-powered) |
| Compliance | Designed for ISO 5667-12, ASTM D6913, and EU Water Framework Directive sediment sampling protocols |
| Brand | Eijkelkamp |
|---|---|
| Model | DIVER (DI601/DI602/DI605/DI610, CTD-Diver, Micro-Diver) |
| Type | Submersible Pressure-Based Water Level Sensor |
| Measurement Parameters | Water Level (Depth), Temperature (±0.1 °C), Optional Conductivity (CTD-Diver: 0–80 mS/cm, ±1% FS) |
| Depth Ranges | 10 m / 20 m / 30 m / 50 m / 100 m (model-dependent) |
| Resolution | 0.2–2 cm (level), 0.01 °C (temperature), 0.1% FS (conductivity) |
| Accuracy | ±0.05–0.1% FS (level), ±0.1 °C (temperature), ±1% FS (conductivity) |
| Operating Temperature | −20 to +80 °C |
| Housing Material | RVS 316L stainless steel (Micro-/DIVER) or Zirconia ceramic (CTD-Diver) |
| Pressure Sensor Element | Alumina ceramic |
| Dimensions | Ø18 mm × 90 mm (Micro-/DIVER) |
| Weight | 60 g (Micro-/DIVER) |
| Memory Capacity | 2 × 48,000 readings (Micro-/DIVER) |
| Sampling Interval | 0.5 s to 99 h (adjustable) |
| Battery Life | 8–10 years (typical, at 15-min interval) |
| Temperature Compensation Range | −10 to +40 °C (for pressure sensor) |
| Atmospheric Compensation | Compatible with Baro-Diver for barometric correction |
| Compliance | Designed for long-term unattended deployment in compliance with ISO 14688-1 (soil description), ASTM D4043 (groundwater monitoring), and GLP-aligned data integrity practices |
| Brand | Eijkelkamp |
|---|---|
| Origin | Netherlands |
| Model | 12.42 |
| Sampling Depth | 5 m |
| Sample Tube Dimensions | Ø50 mm × 1000 mm |
| Sample Volume | 1.14 L |
| Connection Type | Bayonet Coupling |
| Material | Stainless Steel Frame, NBR Rubber Piston, Transparent Acrylic Sample Tube |
| Standard Configuration | Sampler Body, Two Cutting Heads (Liquid & Solid), Sample Tube, Piston Rod, 5-m Extension Rod Set, Carrying Backpack, Accessories |
| Brand | Eijkelkamp |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Munsell |
| Pricing | Available Upon Request |