JP
Filter
Showing all 21 results
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | Centrofriger BL-II |
| Type | Benchtop Refrigerated Centrifuge |
| Max Speed | 6,000 rpm |
| Max RCF | 1,000 × g |
| Max Capacity | 400 mL (horizontal rotor configuration) |
| Dimensions (W×D×H) | 34 × 41 × 54 cm |
| Construction | DUR-Al alloy housing, stainless steel bowl and top plate, steel safety chamber |
| Drive | Maintenance-free induction motor |
| Noise Level | 50–60 dB(A) |
| Control System | Microprocessor-based digital control with rotor auto-recognition, 10 programmable protocols, real-time RCF calculation, timer, acceleration/deceleration profiling, temperature monitoring |
| Airflow | Unidirectional non-recirculating air exhaust system |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | Centronic BL-II |
| Type | Benchtop Refrigerated Centrifuge |
| Rotor Configuration | Horizontal (Swinging-Bucket) |
| Max Speed | 20,000 rpm |
| Max RCF | 30,000 × g |
| Max Capacity | 4 × 100 mL |
| Temperature Range | -10 °C to +40 °C |
| Noise Level | 50–60 dB(A) |
| Dimensions (H×W×D) | 34 × 41 × 54 cm |
| Power Consumption | 440 W |
| Weight | 22 kg |
| Construction | DUR-Al alloy outer housing, stainless steel inner bowl and top plate, steel-reinforced safety chamber |
| Control System | Microprocessor-based digital control with auto-rotor recognition, 10 programmable protocols, real-time RCF/speed conversion, ramp/deceleration profiling, and thermal management via non-recirculating air exhaust |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | 1102 |
| Instrument Type | Air-Jacketed Temperature-Controlled Orbital Shaker |
| Timer Range | 0–500 h |
| Oscillation Speed | 30–300 rpm |
| Orbit Diameter | 26 mm |
| Temperature Range | Ambient +5°C to 60°C |
| Number of Shaking Platforms | 2 |
| Construction | AISI 316 Stainless Steel Interior |
| Exterior | Epoxy-Coated Steel Cabinet |
| Drive System | Brushless Induction Motor |
| Safety Features | Door-Interlocked Power Cut-off, Overload Protection, Audible & Visual End-of-Program Alert, Fault Detection (Temp/Time Deviation) |
| Platform Flexibility | Adjustable Support Arms, Interchangeable Fixtures (Erlenmeyer Clamp, Microtiter Plate Holder, Spring-Based Universal Mount) |
| Brand | JP |
|---|---|
| Origin | Spain |
| Type | Benchtop Abbe Refractometer |
| Temperature Control | Yes (external water bath compatible) |
| Digital Display | Yes |
| Refractive Index Range (nD) | 1.300–1.700 |
| Brix Range | 0–95% |
| Refractive Index Resolution | 0.0005 |
| Refractive Index Accuracy | ±0.0002 |
| Brix Accuracy | ±0.1% |
| Built-in Thermometer Range | 0–70 °C |
| Optical System | ×2 magnification telescope with diopter-adjustable eyepiece |
| Construction | Rigid metal housing |
| Dimensions | 240 H × 100 W × 200 D mm |
| Weight | 2.6 kg |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | CY-500 |
| Instrument Type | Ultrasonic Probe Homogenizer |
| Dimensions (W×D×H) | 280 × 440 × 260 mm |
| Processing Volume Range | 10–40,000 mL |
| Transducer Material | Titanium Alloy Probe (Φ5.6 mm × 60 mm) |
| Frequency | 20 kHz |
| Power Supply | 220 V, 50 Hz |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | Det-gras N |
| Extraction Chamber Volume | 40 mL |
| Receiver Flask Volume | 50 mL |
| Temperature Range | 90–240 °C |
| Temperature Control Accuracy | ±1 °C |
| Number of Channels | 6 |
| Solvent Recovery Rate | 60–80% |
| Maximum Solvent Volume | 50 mL |
| Programmable Methods | 16 |
| Extraction Time Range | 0–99 min |
| Display | Dual-line LCD |
| Control Interface | 4-button membrane keypad |
| Construction | Steel frame with epoxy resin chemical-resistant coating |
| Compatible Solvents | Petroleum ether, diethyl ether, n-hexane, acetone, acetonitrile |
| Extraction Vessels | Glass thimbles or cellulose filter cartridges |
| Safety Features | Over-temperature cutoff protection |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | Dosi-fiber |
| Sample Capacity | 6 positions |
| Throughput | up to 36 samples/day (Weende method) |
| Sample Mass Range | 0.5–3 g (typical 1 g) |
| Measurement Range | 0.1–100% |
| Repeatability | ±1% (for fiber content 1–30%) |
| Accuracy | ±0.1% |
| Cooling Water Consumption | 1 L/min |
| Heating System | Infrared elements |
| Housing | Rilsan-coated robust enclosure |
| Brand | JP |
|---|---|
| Origin | Shandong, China |
| Model | GC-2011 |
| Instrument Type | Benchtop Laboratory Gas Chromatograph |
| Detector Standard Configuration | FID & TCD |
| Optional Detectors | ECD, FPD, NPD |
| Temperature Control Range | Ambient +8°C to 420°C |
| Temperature Accuracy | ±0.1°C ≤200°C |
| Ramp Rate | 1–30°C/min |
| FID Detection Limit | ≤1×10⁻¹¹ g/s (benzene) |
| FID Noise | ≤0.02 mV |
| FID Drift | ≤0.1 mV/h |
| TCD Sensitivity | ≥3000 mV·mL/mg (benzene) |
| TCD Noise | ≤0.02 mV |
| TCD Drift | ≤0.1 mV/h |
| Programmable Temperature Program | 5-step ramp |
| Column Oven Cooling | Intelligent variable-frequency rear-door system enabling near-ambient operation |
| Inlet Systems | Dual packed-column inlets + dedicated split/splitless capillary inlet with tail-purge |
| Data System | Embedded microprocessor with LCD interface |
| Compliance | Designed to support GLP-compliant workflows |
| Brand | JP |
|---|---|
| Origin | Shandong, China |
| Instrument Type | Laboratory Gas Chromatograph |
| Model | GC-7890 |
| Column Oven Temperature Range | Ambient +5°C to 450°C (0.1°C increments) |
| Temperature Accuracy | ±0.1°C |
| Max Heating Rate | 40°C/min |
| Detector Options | FID, TCD, FPD, NPD, ECD |
| Dual-Column Capability | Yes (2 capillary or 2 packed columns) |
| Programmable Temperature Ramping | 7-stage |
| Independent Injector/Detector Zones | 6 temperature-controlled zones |
| Operating Voltage | AC 220 V ±10%, 50 Hz |
| Power Consumption | ≤2.2 kW |
| Dimensions | 660 × 460 × 465 mm |
| Weight | 60 kg |
| Brand | JP |
|---|---|
| Origin | Shandong, China |
| Model | GC-7890 |
| Instrument Type | Laboratory Gas Chromatograph |
| Application Field | Alcohol Analysis (Wine & Spirits Chromatography) |
| Oven Temperature Range | +5 °C to 450 °C |
| Ramp Rate | 0.1–40 °C/min |
| Injector Maximum Operating Temperature | Room Temperature +10 °C to 400 °C |
| Column Oven Temperature Stability | ±0.01 °C (≤180 °C) |
| Programmable Temperature Ramping | 8-step |
| Simultaneous Detector Configuration | up to 3 detectors (e.g., dual TCD, dual FID, or combined TCD/FID) |
| FID Sensitivity | ≤3×10⁻¹² g/s (benzene, CS₂) |
| FID Baseline Noise | ≤3×10⁻¹³ A |
| FID Drift | ≤5×10⁻¹³ A/30 min |
| Linearity | ≥10⁶ |
| Power Supply | AC 220 V ±10%, 50 Hz, 2200 W |
| Dimensions | 660 × 460 × 465 mm |
| Weight | 60 kg |
| Brand | JP |
|---|---|
| Origin | Shandong, China |
| Model | GC-8890 |
| Instrument Type | Benchtop Laboratory Gas Chromatograph |
| Temperature Control Range | Ambient +4 °C to 450 °C |
| Temperature Precision | ±0.1 °C |
| Programmable Temperature Ramping | 16-step, up to 80 °C/min |
| Electronic Pressure/Flow Control (EPC/EFC) | 4-stage programming, 0–0.6 MPa pressure range, 0–500 sccm flow range, resolution: 0.01 kPa / 0.01 sccm |
| Detectors Supported | FID (Mt ≤ 2×10⁻¹² g/s), TCD (S ≥ 12,000 mV·mL/mg), ECD (M ≤ 2×10⁻¹⁴ g/mL), FPD, NPD |
| Inlet Options | Split/splitless, PTV, headspace, pyrolysis |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | Hightemp |
| Temperature Range | 60–400 °C |
| Temperature Stability (≤300 °C) | ±1.0 °C |
| Temperature Uniformity (≤300 °C) | ±3.0 °C |
| Setpoint Accuracy | ±2% of working temperature |
| Resolution | 1.0 °C |
| Internal Dimensions (H×W×D) | 50×40×40 cm |
| External Dimensions (H×W×D) | 80×120×61 cm |
| Chamber Material | AISI 310 heat-resistant stainless steel |
| Heating Method | Forced-air convection with shielded heating elements |
| Fan Motor | Thermally protected, independently powered, operable during cooling cycle |
| Ventilation | Adjustable exhaust outlet |
| Cabinet Finish | Epoxy-polyester powder coating |
| Power Supply | 230/400 V three-phase |
| Rated Power | 4000 W |
| Net Weight | 75 kg |
| Shelf Positions | 4 fixed rails |
| Compliance | Designed for GLP-compliant thermal processing in R&D and QC laboratories |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | Hotcold S |
| Instrument Type | Upright |
| Effective Volume | 50 L |
| Internal Dimensions (W×D×H) | 650 × 500 × 430 mm |
| External Dimensions (W×D×H) | 1280 × 630 × 630 mm |
| Power Supply | 220 V AC |
| Rated Power | 400 W |
| Temperature Range | +5 °C to +65 °C |
| Temperature Stability at 20 °C | ±0.1 °C |
| Temperature Uniformity at 20 °C | ±0.5 °C |
| Setpoint Accuracy | ±2 °C |
| Temperature Resolution | 0.1 °C |
| Cooling Medium | R134a |
| Construction | Epoxy-coated exterior shell, AISI 304 stainless steel interior chamber |
| Door | Double-glazed insulated glass |
| Features | Forced-air convection, digital electronic temperature controller with time display, internal fluorescent lighting, external access ports for probes/tubing, four casters with locking brakes |
| Safety | DIN 12880-2 compliant adjustable safety thermostat with manual reset and independent heater cutoff |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | Incubator CO2 |
| Temperature Range | 0–60 °C |
| Temperature Uniformity | ±0.5 °C |
| Humidity Range | 20–95% RH |
| Capacity | 150 L |
| CO₂ Range | 0–20% (±0.3% stability) |
| Temperature Resolution | 0.1 °C |
| CO₂ Resolution | 0.1% |
| Power Consumption | 800 W |
| Net Weight | 110 kg |
| Interface | RS-232 |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | Incubig |
| Temperature Range | 20–80 °C |
| Temperature Stability (at 37 °C) | ±0.1 °C |
| Temperature Uniformity (at 37 °C) | ±0.5 °C |
| Setpoint Accuracy | ±2.0% of working temperature |
| Resolution | 0.1 °C |
| Air Circulation | Forced convection via adjustable ventilation fan |
| Chamber Material | AISI 304 stainless steel |
| Door | Double-layer, inner tempered glass door with flexible silicone gasket |
| External Casing | Epoxy-coated steel |
| Interface | RS-232 port for PC, printer, or USB adapter |
| Compliance | Designed to support GLP-compliant workflows and ISO 13485-aligned laboratory environments |
| Brand | JP |
|---|---|
| Origin | Spain |
| Type | Cabinet-style desktop distillation unit |
| Purified Water Grade | ASTM Type I / ISO 3696 Grade 1 |
| Resistivity | ≥18.2 MΩ·cm at 25°C |
| Heavy Metals & Soluble Silica | <1 ppb |
| Total Organic Carbon (TOC) | <3 ppb |
| Microbial Count | <0.001 EU/mL |
| Particles (>0.1 µm) | <1 particle/mL |
| Flow Rate | 4 L/h |
| Feed Water Conductivity | ≤412 µS/cm |
| Power Consumption | 3000 W |
| Dimensions (L×W×H) | 40 × 55 × 22 cm |
| Weight | 12 kg |
| Cooling Water Consumption | 12 L/min |
| Safety Systems | Dual-level water level sensor + dry-run thermal cut-off |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | Medifriger-BL-S |
| Instrument Type | Benchtop Refrigerated Centrifuge |
| Speed Range | 10,000–30,000 rpm |
| Max RCF | 50,000 × g |
| Max Capacity | 800 mL (4 × 200 mL) |
| Temperature Range | 0–30 °C |
| Noise Level | 50–60 dB(A) |
| Dimensions (H×W×D) | 38 × 68 × 52 cm |
| Weight | 70 kg |
| Power | 1230 W |
| Construction | DUR-Al alloy outer housing, stainless-steel inner bowl and top plate, steel-reinforced safety chamber |
| Drive System | Maintenance-free induction motor |
| Cooling System | Hermetically sealed compressor with rear-exhaust non-recirculating air cooling |
| Control System | Microprocessor-based digital control with rotor auto-identification, 10 programmable protocols, real-time RCF/speed/timer/temperature display, and integrated alarm monitoring |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | Vaciotem-T |
| Temperature Range | 35–200 °C |
| Temperature Stability (≤100 °C) | ±1.0 °C |
| Temperature Uniformity (≤100 °C) | ±2.0 °C |
| Setpoint Accuracy | ±1.0 °C |
| Temperature Resolution | 1.0 °C |
| Timer Range | 1 min to 9 h 59 min |
| Delay Start | 1 h to 24 h |
| Chamber Dimensions (W×D×H) | 34×52×60 cm |
| External Dimensions (W×D×H) | 54×76×70 cm |
| Chamber Material | AISI 304 Stainless Steel |
| Tray Material | Electroplated Aluminum |
| Heating Method | Forced-air Circulation |
| Exterior Finish | Epoxy-coated Steel |
| Brand | JP |
|---|---|
| Country of Origin | Spain |
| Model | WRS-1B |
| Sample Capacity | 1 |
| Display | Alphanumeric LCD |
| Input Interface | Photocell-based optical detection with alphanumeric keypad |
| Measurement Method | Optical transmission photometry (light extinction at solid–liquid phase transition) |
| Data Output | Automatic onset, clear point, and endpoint recording |
| Compliance Context | Designed for GLP-compliant laboratories |
| Price Range | USD 6,800 – 13,600 (FOB Spain) |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | WYA-2S |
| Type | Benchtop Refractometer |
| Temperature Control | Yes |
| Digital Display | Yes |
| Refractive Index Range (nD) | 1.3000–1.7000 |
| Brix Range | 0–95% |
| Brix Accuracy | ±0.1% |
| Refractive Index Resolution | ±0.0002 |
| Temperature Compensation Range for Brix | 15–45 °C |
| Operating Temperature Range | 0–50 °C |
| Interface | RS232 port with dedicated software |
| Brand | JP |
|---|---|
| Origin | Spain |
| Model | R-4 Reser |
| Purified Water Grade | Type I (ASTM D1193-20) |
| Resistivity | 18.2 MΩ·cm at 25 °C |
| Heavy Metals & Soluble Silica | <1 ppb |
| Total Organic Carbon (TOC) | <3 ppb |
| Microbial Count & Endotoxins | <0.001 EU/mL |
| Particles (>0.1 µm) | <1 mL⁻¹ |
| Flow Rate | 4 L/h |
| Feed Water Conductivity | ≤412.5 µS/cm |
| Power Consumption | 3000 W |
| Dimensions (L×W×H) | 47×54×31 cm |
| Weight | 24 kg |
| Cooling Method | Epoxy-Coated Resin Enclosure with Stainless Steel Heating Elements |
| Safety Features | Automatic Dry-Run Cut-Off, Full-Tank Shut-Off, Manual Restart Required After Drain |