Keopsys
Filter
Showing all 27 results
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | CEFA-C-BO-HP |
| Operating Wavelength | 1540–1565 nm |
| Output Power Range | 25–42 dBm (316 µW – 15.8 mW) |
| Polarization | Linear (PM fiber, PER > 20 dB) |
| Input Power Range | 5–25 dBm |
| Noise Figure | <7–9.5 dB (depending on configuration) |
| Control Modes | ACC & APC (APC range: 10–100%) |
| Power Stability (1 h) | <1–2% |
| Fiber Types | SMF-28 or Panda PM fiber |
| Input/Output Connectors | FC/APC, SC/APC, E2PS, C1 |
| Power Consumption | 15–200 W |
| Monitoring | Input and Output (output optional) |
| Platform Compatibility | B202, M101, M301, M403, B301 |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | CEFA-C-HG |
| Operating Band | C-band (L-band optional) |
| Small-Signal Input Sensitivity | −50 dBm |
| Small-Signal Gain | ≥ 50 dB |
| Noise Figure | Near Quantum Limit (~3–4 dB) |
| Polarization-Maintaining Output | Optional |
| Form Factor | Rack-Mount or OEM Module |
| Compliance | RoHS, CE, IEC 61300-3-35 (Fiber Optic Device Reliability) |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | CEFA-C-PB-HP |
| Saturation Output Power | up to +42 dBm |
| Noise Figure | Low |
| Input Power Range | Low-level (with integrated pre-amplifier) |
| Polarization-Maintaining Output | Optional |
| Linewidth | <100 kHz |
| Control Interface | Standalone module or system-level controller |
| Form Factor | Compact OEM module |
| Power Consumption | Low |
| Reliability | High |
| Operating Wavelength Band | C-band (1527–1566 nm) |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | CEFA-PB-HP Series |
| Output Power Range | +25 dBm to +42 dBm |
| Noise Figure | < 5.5 dB |
| Operating Wavelength | C-band (1535–1565 nm), L-band optional |
| Input Power Range | −20 dBm to +5 dBm |
| Control Modes | APC (Automatic Power Control) and ACC (Automatic Current Control) |
| Polarization-Maintaining Output | Optional |
| Application Domain | Optical communications, free-space optical links, tunable laser power boosting, pre-amplification, in-line amplification, Telcordia-compliant component testing |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model Series | CRFL, CEFL-KILO, PEFL-KULT, PEFL-EOLA |
| Wavelength Ranges | 1060–1090 nm (Yb), 1455/1480 nm (Raman), 1545–1565 nm (Er), 1500 nm (Pulsed) |
| Output Power | Up to 20 W (CW), up to 15 W (Er), up to 100 µJ/pulse (PEFL-KULT) |
| Linewidth | <15 kHz (CEFL-KILO), <3 kHz (PEFL-EOLA), few nm to GHz (CRFL) |
| Pulse Width | 0.5–200 ns (PEFL-KULT), 100–500 ns (PEFL-EOLA) |
| Repetition Rate | 10 Hz–1 MHz (PEFL-KULT), 10–20 kHz (PEFL-EOLA) |
| Polarization | Linear or free |
| Operating Modes | CW, Q-switched, long-pulse |
| Compliance | CE, RoHS, IEC 60825-1 (Class 4 Laser Product) |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Manufacturer | Keopsys SA |
| Type | CW Raman Fiber Laser |
| Model | CRFL |
| Output Power | 2–20 W |
| Operating Wavelengths | 1455 nm & 1480 nm (standard), customizable |
| Spectral Linewidth | < 2 nm or < 3 nm |
| In-Band Power | > 90% (±5 nm around peak) |
| SMSR (1000–1400 nm) | >14 dB or >15 dB |
| Polarization State | Unpolarized |
| Beam Quality (M²) | < 1.1 |
| Output Fiber | SMF-28 |
| Connector Options | FC/APC, E2PS, or collimated output |
| Power Stability | High (typical < ±0.5% RMS over 8 hrs) |
| Control Options | Internal photodiode + APC (optional) |
| Power Tuning Range | 10–100% or 25–100% (model-dependent) |
| Platform Form Factor | Benchtop or OEM module |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | CRFL |
| Output Power | Up to 20 W |
| Wavelength Options | 1455 nm or 1480 nm |
| Control Modes | Automatic Current Control (ACC) and Automatic Power Control (APC) |
| Interface | GPIB |
| Monitoring | Integrated optical feedback monitor |
| Form Factor | Rack-mountable compact module |
| Primary Applications | Distributed DWDM Raman amplification, Telcordia qualification testing of passive components, EDFA gain module pumping, high-power pump source deployment |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | CTFA |
| Output Power | Up to +40 dBm (10 W) |
| Operating Wavelength Range | 1930–2050 nm |
| Gain Bandwidth | 1900–2050 nm |
| Polarization-Maintaining Option | Available |
| Beam Quality | Diffraction-Limited (M² < 1.1) |
| Input OSNR Enhancement | Built-in Pre-Amplifier Stage |
| Eye-Safety Compliance | EN 60825-1:2014 Class 1M / IEC 60825-1:2014 Class 1M |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model Series | CVFA (Visible), CYFA (1 µm), CFAL (C-band & L-band), C-Band Pulsed & Bidirectional Amplifiers |
| Wavelength Coverage | 400–700 nm (CVFA), 1030–1080 nm (CYFA), 1525–1565 nm (C-band), 1570–1610 nm (L-band) |
| Output Power Range | Up to +30 dBm (1 W) CW |
| Small-Signal Gain | Up to 45 dB |
| Compliance | CE, RoHS, IEC 61300-3-35 (Fiber Optic Device Reliability) |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | CVFL |
| Type | Continuous-Wave (CW) Visible-Fiber Laser |
| Wavelength Options | 520–780 nm (model-dependent) |
| Output Power | Up to 3 W |
| Beam Quality | M² < 1.1 (diffraction-limited) |
| Polarization | Linear |
| Spectral Purity | High SMSR |
| Linewidth | 20 GHz (GIGA variants) |
| Frequency Tunability & Modulation | Available (KILO/MEGA variants) |
| Noise Performance | Ultra-low phase noise and RIN |
| Operation Mode | Turnkey, single-frequency (KILO), or multi-longitudinal-mode (GIGA) |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Type | CW and Pulsed Fiber Amplifiers |
| Wavelength Ranges | 1060–1090 nm (Yb), 1100–1120 nm (Yb), 1527–1566 nm (C-band), 1565–1605 nm (L-band), 1900–2000 nm (Tm) |
| Saturation Output Power | up to +42 dBm (Yb), +33 dBm (L-band & Tm), +23 dBm (C-band LP) |
| Polarization | Free or Polarization-Maintaining (PM) |
| Integrated Pre-Amplifier | Yes (CYFA-PB, CEFL-L-PB-HP, CTFA-PB, CEFA-C-WDM-LP) |
| Input Power Range | –20 dBm to +20 dBm depending on model |
| Application Class | Laboratory, Industrial OEM, Scientific Laser Systems |
| Compliance | RoHS, CE, IEC 60825-1 (Laser Safety), EN 61326-1 (EMC) |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | CYFL-TERA |
| Output Power | Up to 20 W |
| Operating Wavelength | 1060–1090 nm (selectable) |
| Spectral Linewidth | Few nanometers |
| Polarization | Free or linear |
| Compliance | CE, RoHS, IEC 60825-1 (Class 4 Laser Product) |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Type | Import |
| Models | CVFL-GIGA, CYFL-GIGA, CRFL-TERA, CEFL-TERA, CTFL-TERA |
| Wavelength Range | 520–590 nm (green), 1060–2050 nm (NIR) |
| Output Power | up to 3 W (520–590 nm), up to 20 W (1083 nm), up to 30 W (1060–2050 nm) |
| Linewidth | ~GHz (GIGA series), ~THz / sub-nm (TERA series) |
| Beam Quality | Diffraction-limited (M² < 1.1) |
| SMSR | >50 dB |
| Stability | <±0.5% RMS power fluctuation over 8 h |
| Operating Temperature | 15–35 °C |
| Cooling | Conductive + optional air/water |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 4 Laser Product |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model Variants | CVFL-KILO, CYFL-KILO, CYFL-MEGA, CEFL-KILO |
| Output Power Range | 1–10 W (single-mode fiber) |
| Linewidth | <1 kHz (typical, single-frequency operation) |
| Polarization | Linear |
| Wavelength Options | 530–560 nm, 630–650 nm, 676–790 nm, 1064 nm, 1083 nm, 1545–1565 nm |
| SMSR | >60 dB |
| RIN | <−150 dB/Hz (10 MHz–1 GHz) |
| Phase Noise | <−120 dBc/Hz @ 10 kHz offset |
| Environmental Stability | <±1 pm wavelength drift over 0–40 °C |
| Optional Features | Wavelength tuning, frequency modulation, mid-stage amplification |
| Compliance | CE, RoHS, IEC 60825-1 Class 4 Laser Product |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | PEFA-EOLA |
| Wavelength | 1550 nm |
| Pulse Energy | up to 110 µJ |
| Peak Power | up to 360 W |
| Pulse Width | 200–400 ns |
| Repetition Rate | 10–20 kHz |
| Beam Quality (M²) | <1.5 |
| Type | Pulsed Erbium-Doped Fiber Amplifier (EDFA) Module |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | PEFA-SP-C |
| Output Power | 33 dBm (avg.) |
| Peak Power | 1 kW |
| Pulse Duration | fs–ps range |
| Repetition Rate | 10 MHz – 100 GHz |
| Polarization-Maintaining Output | Optional |
| Form Factor | Rack-Mountable or Module-Based |
| Core Technology | Yb-doped Double-Clad Fiber Amplification |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | PEFA-SP-C Series |
| Wavelength Range | 1535–1565 nm |
| Saturation Output Power | up to +33 dBm |
| Pulse Width | 0.3–10 ps |
| Peak Power | up to 1 kW |
| Repetition Rate | 10 MHz – 100 GHz |
| Compliance | CE, RoHS |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | PEFL-EOLA Pulsed Narrow-Linewidth Fiber Laser |
| Wavelength | 1550 nm |
| Operation Mode | Pulsed |
| Linewidth | <100 kHz (typ.) |
| Pulse Width | 1–200 ns (adjustable) |
| Repetition Rate | 1–200 kHz |
| Average Power | Up to 2 W |
| Peak Power | >10 kW |
| Beam Quality | M² < 1.1 |
| Polarization Extinction Ratio | >20 dB |
| Operating Temperature | −10 °C to +60 °C |
| Power Consumption | <30 W |
| Cooling | Conduction-cooled |
| Compliance | IEC 60825-1:2014 (Class 1M), RoHS, CE |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | PEFL-KULT |
| Wavelength | 1.5 µm |
| Pulse Energy | up to 100 µJ |
| Peak Power | up to 15 kW |
| Pulse Width | 0.5–200 ns |
| Repetition Rate | 10 Hz–1 MHz |
| Beam Quality (M²) | <1.1 |
| Operating Temperature | −35 °C to +65 °C |
| Type | Eye-Safe Pulsed Fiber Laser Module |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | PEFL-MIRVISION Series |
| Operating Wavelength | 1545 ± 1 nm |
| Pulse Width (FWHM) | 0.5–200 ns |
| Repetition Rate | 15 kHz–2 MHz |
| Pulse Energy | up to 350 µJ |
| Peak Power | up to 25 kW |
| Average Power | 3–10 W |
| Beam Quality (M²) | 1.5–2.5 |
| Polarization | Linear or Random (≥15 dB) |
| Output Connector | FC/APC or Collimator |
| Seed Reference Output (Optional) | 1 m SMF pigtail, >0.1 mW peak power, FC/PC |
| Operating Temperature Range | −35 °C to +65 °C |
| Compliance | MIL-STD-810G, RTCA DO-160G |
| Control Interface | RS232/USB, TTL trigger |
| Maintenance | All-fiber, maintenance-free architecture |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | PGFL |
| Wavelength | 532 nm |
| Pulse Energy | up to 50 µJ |
| Peak Power | up to 15 kW |
| Average Output Power | up to 2 W |
| Repetition Rate | 10–200 kHz |
| Beam Quality | Diffraction-Limited (M² < 1.3) |
| Power Consumption | < 25 W |
| Package | Compact, Ruggedized OEM Module |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 4 Laser Product |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | PGFL-KULT Series |
| Wavelength | 532 nm |
| Pulse Energy | Up to 10 mJ |
| Peak Power | Up to 10 kW |
| Pulse Width | 1–5 ns |
| Repetition Rate | 50 kHz |
| Polarization | Linear |
| Output Type | Free-space or fiber-coupled |
| Compliance | CE, RoHS, IEC 60825-1 (Laser Safety Class 4) |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | PUFL |
| Wavelength | 355 nm |
| Output Type | Free-space, collimated beam |
| Pulse Energy | up to 1.6 µJ |
| Peak Power | up to 1.6 kW |
| Average Power | up to 80 mW |
| Repetition Rate | 50 kHz |
| Beam Quality (M²) | < 1.3 |
| Power Consumption | Low |
| Package | Compact and rugged |
| Application Fields | Aerosol detection, fluorescence excitation, Raman spectroscopy, biological experimentation, wafer inspection |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Product Series | PUFL, PGFL, PYFL-KULT, PEFK-KULT, PTFL-KULT, PYFL-MIRVISION, PEFK-MIRVISION |
| Wavelength Bands | 1.0 µm, 1.5 µm, 2.0 µm (KULT) |
| Pulse Format | Nanosecond to Sub-microsecond Pulses |
| Linewidth | < 100 MHz (typical, transform-limited) |
| Operation Mode | Q-switched or MOPA-configured |
| Cooling | Air-cooled or Conduction-cooled (model-dependent) |
| Compliance | CE, RoHS, IEC 60825-1:2014 (Class 4 Laser Product) |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | PYFL-KULT Series |
| Wavelength | 1064 nm |
| Pulse Energy | up to 25 µJ |
| Peak Power | up to 25 kW |
| Pulse Width | 0.1–30 ns |
| Repetition Rate | 10 Hz–1 MHz |
| Beam Quality (M²) | < 1.1 |
| Operating Temperature | −35 °C to +65 °C |
| Type | Pulsed Ytterbium-Doped Fiber Laser Module |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | E01–E04 |
| Operating Wavelength | 1543 nm |
| Input Power Range | −20 dBm to 0 dBm |
| Output Power (with −6 dBm input) | 25 dBm / 27 dBm / 30 dBm / 33 dBm |
| Pulse Energy | 10 μJ / 40 μJ / 80 μJ / 110 μJ |
| Peak Power | 50 W / 200 W / 200 W / 360 W |
| Average Output Power | 200 mW / 400 mW / 800 mW / 2200 mW |
| Pulse Repetition Frequency | 20 kHz / 10 kHz / 20 kHz / — |
| Pulse Width | 200 ns / 200 ns / 400 ns / 300 ns |
| Polarization | Linear (PM fiber, PER > 17 dB) |
| Polarization Extinction Ratio | >20 dB (E01), >17 dB (E02–E04) |
| Noise Figure (−6 dBm @ 1550 nm input) | <6 dB (SM), <7 dB (PM) / <6.5 dB (SM), <7.5 dB (PM) / <7 dB (SM), <8 dB (PM) |
| Input Fiber | Panda-type or SMF-28 |
| Output Fiber | Panda-type or Large Mode Area (LMA) fiber |
| Input Pigtail Length | 100 ± 2 cm |
| Output Pigtail Length | 35 ± 2 cm |
| Input/Output Connector | FC/APC or Collimator |
| Power Consumption | <10 W / <20 W / <40 W / <50 W |
| Compatible Platforms | PE1D, PE3D (E01/E02), PE1D (E03), PE2D (E04) |
| Brand | Keopsys |
|---|---|
| Origin | France |
| Model | K01–K04 |
| Operating Wavelength | 1543 nm |
| Pulse Width | 1–3 ns |
| Repetition Rate | 5–100 kHz |
| Pulse Energy | 1–25 µJ |
| Peak Power | 1–25 kW |
| Average Power | 5 mW–1.3 W |
| Output Polarization | Linear (PM fiber, PER > 17 dB) |
| Beam Quality (M²) | <1.1–<1.3 |
| Output Fiber | Panda or SMF |
| Fiber Pigtail Length | 32 ± 2 cm |
| Input/Output Interface | FC/APC or Collimator |
| Power Consumption | <8–40 W |
| Seed Source Option | Available |
| Platform Compatibility | PK2A / PK5D |