LabCompanion
Filter
Showing 151–180 of 483 results
| Brand | LabCompanion |
|---|---|
| Model | LH Series |
| Type | High-Temperature Aging Test Chamber |
| Standards Compliance | ASTM D2436, ASTM E145, JIS K630, JIS K7212, CNS 3556, JTTC SPEC-151 |
| Internal Dimensions (L×W×H) | LH-72: 40×40×45 cm |
| LH-150 | 50×50×55 cm |
| Temperature Range | Ambient to 200°C (optional to 300°C) |
| Heating Power | LH-72: 1.8 kW |
| LH-150 | 3.2 kW |
| Rotational Speed | 8–10 rpm |
| Motor Rating | LH-72: 1/4 HP |
| LH-150 | 1/2 HP |
| Air Circulation | Forced convection with axial fan and baffle-guided hot-air flow |
| Weight | LH-72: 80 kg |
| LH-150 | 120 kg |
| External Dimensions (L×W×H) | LH-72: 84×54×100 cm |
| LH-150 | 95×65×113 cm |
| Construction | Double-wall insulated chamber with stainless steel interior (SUS304), aluminized steel exterior, silicone door gasket, over-temperature protection, PID temperature controller with digital display |
| Brand | LabCompanion |
|---|---|
| Model | LP |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (OEM/ODM Capable) |
| Type | Benchtop-to-Floor-Standing Programmable Climatic Chamber |
| Temperature Range | -70°C to +150°C (selectable sub-ranges: 0–150°C, -20–150°C, -40–150°C, -60–150°C, -70–150°C) |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±1.0°C |
| Temperature Fluctuation | ±0.2°C |
| Temperature Deviation | ±2.0°C |
| Humidity Fluctuation | ±2.0% RH |
| Humidity Deviation | ±2.0% RH |
| Heating Rate (no load, ambient to target) | 4–7°C/min |
| Cooling Rate (no load, ambient to target) | 0.7–1.0°C/min |
| Chamber Internal Dimensions | 1000 × 1000 × 1000 mm (W×D×H) |
| Insulation | High-density ultra-fine glass fiber (≥150 mm thickness, multi-layered) |
| Humidification System | External boiler-type steam generator with energy recovery design (≈70% power reduction vs. conventional resistive humidifiers) |
| Control System | Japanese-made digital touch-panel PID microprocessor controller with SSR solid-state relays |
| Safety Protections | Leakage current protection, over-temperature cut-off, door-open alarm, low-water-level detection, real-time fault diagnostics |
| Compliance | Designed per IEC 60068-2 series environmental testing standards |
| Brand | LabCompanion |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | LP |
| Capacity Options (L) | 80, 120, 150, 225, 408, 800, 1000 |
| Temperature Ranges | H (0 to +150°C), R (−20 to +150°C), L (−40 to +150°C), U (−60 to +150°C), S (−70 to +150°C) |
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ±0.5°C |
| Humidity Uniformity | ±1.0% RH |
| Heating Rate | −20→+150°C ≤60 min |
| Cooling Rate | +20→−70°C ≤80 min |
| Control System | Q8 Touchscreen Controller |
| Refrigeration | Hermetic Twin-Screw Compressor (Tecumseh/Tecumseh-compatible or equivalent, R404A/R507 alternative refrigerant) |
| Construction | Interior – Mirror-Finish SUS304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Compliance | GB/T 10586, GB/T 10592, GB/T 2423.1/3/4/34, IEC 60068-2-1/-2/-14, MIL-STD-810D, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LP-120 |
| Price | Upon Request |
| Temperature Range | 0°C to 100°C |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Humidity Deviation | +2 / –3% RH |
| Heating Rate (0°C → 100°C) | ~35 min |
| Cooling Rate (100°C → 0°C) | ~40 min |
| Control Accuracy | ±0.1°C (temp), ±1% RH (humidity) |
| Sensor Type | PT100 Platinum Resistance Thermometer |
| Power Supply | AC 380V ±10%, 50 ±0.5 Hz, 3-phase 5-wire |
| Compliance Standards | GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.3–1993 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LP-150U |
| Temperature Range | −20 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±2 %RH (≥75 %RH) |
| Internal Dimensions (W×H×D) | 500×600×500 mm |
| Cooling Method | Air-Cooled |
| Refrigeration Unit | Imported Hermetic Compressor (Tecumseh or Embraco) |
| Controller | Q8-901 Bilingual (English/Chinese) Programmable Touchscreen HMI |
| Compliance | GB/T 10586, GB/T 2423.1–4, IEC 60068-2-1/2/3, MIL-STD-810F, JIS C60068-2, JESD22-A101-B/A103-C/A119 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LP120 |
| Temperature Range | −70 °C to 150 °C (selectable setpoints: 0 °C / −20 °C / −40 °C / −70 °C up to 100 °C or 150 °C) |
| Humidity Range | 20–98 % RH |
| Refrigeration Method | Compressor-based cooling |
| Explosion-Proof | Standard (non-explosion-proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Humidity Stability | ±1.0 % RH |
| Humidity Uniformity | ±3.0 % RH |
| Heating Rate | −70 °C → 100 °C in ≈45 min (YTH-X configuration) |
| Cooling Rate | 20 °C → −70 °C in ≈70 min (YTH-X configuration) |
| Internal Chamber Dimensions (W×D×H) | 60 × 50 × 40 cm |
| Control System | Mitsubishi PLC with 120 mm × 90 mm color touchscreen interface |
| Programming Capacity | 4 programs, up to 100 segments total |
| Control Resolution | 0.1 °C / 0.1 % RH |
| Compliance | EN 60204-1, ISO 9001, CNS, JIS, ASTM, DIN, BS, EIA, HKQ (Hong Kong Quality Assurance Scheme) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LRH-50CL |
| Temperature Range | −40 °C to +65 °C |
| Refrigeration Method | Compressor-based Cooling |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C (High Temp), ±1.0 °C (Low Temp) |
| Temperature Uniformity | ±0.1 °C |
| Temperature Deviation | ±2.0 °C |
| Internal Chamber Dimensions (W×D×H) | 400 mm × 300 mm × 420 mm |
| Refrigerant | R134a |
| Test Port | Ø25 mm (Left Side Wall) |
| Standard Controller | Digital Microprocessor-Based Temperature Controller |
| Optional Features | RS485 Interface, Thermal Printer Support, Multi-Stage Programmable Logic Control (7 Programs × 9 Steps Each, 1–9999 min/step) |
| Brand | LabCompanion |
|---|---|
| Model | LT-150 |
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Internal Dimensions (W×D×H) | 40×40×50 cm |
| External Dimensions (W×D×H) | 107×72×135 cm |
| Temperature Range | 0 to +150°C |
| Humidity Range | 10–98% RH |
| Temperature Control Accuracy | ±0.3°C |
| Humidity Control Accuracy | ±2% RH |
| Temperature Uniformity | ±0.1°C |
| Humidity Uniformity | ±4% RH |
| Inner Chamber Material | SUS#304 Stainless Steel |
| Insulation | High-density PU foam + silicone rubber gasket |
| Heating System | Stainless steel sheathed high-speed heating elements |
| Humidification System | Steam generation type |
| Refrigeration System | Imported high-efficiency compressor |
| Control System | Digital SSR + PID controller with LCD interface |
| Standard Features | Vacuum-sealed double-glazed observation window, adjustable stainless steel shelves, interior LED lighting, castor wheels |
| Safety Protections | Over-temperature cutoff, over-current protection, compressor overload protection, low-water-level alarm |
| Power Supply | AC 1/3-phase, 220/380 V, 50/60 Hz |
| Brand | LabCompanion |
|---|---|
| Model | LT-150 |
| Temperature Range | -70 °C to 150 °C |
| Humidity Range | 10–98 %RH |
| Temperature Control Accuracy | ±0.3 °C |
| Humidity Control Accuracy | ±2 %RH |
| Temperature Uniformity | ±0.1 °C |
| Humidity Uniformity | ±4 %RH |
| Construction | Interior & Exterior – SUS#304 Stainless Steel |
| Insulation | High-Density Polyurethane Foam + Silicone Sponge Seals |
| Heating System | Stainless Steel Sheathed Immersion Heaters |
| Humidification | Steam Generator Type |
| Refrigeration System | Imported High-Efficiency Compressor |
| Control System | Digital SSR + PID Controller with LCD Interface |
| Power Supply | AC 1/3 Phase, 220/380 V, 50/60 Hz |
| Safety Protections | Over-Temperature, Over-Current, Compressor Overload, Low-Water Level |
| Optional Accessories | Vacuum-Glass Viewing Window, Programmable Shelf Racks, LED Interior Lighting, Casters |
| Brand | LabCompanion |
|---|---|
| Model | LT-150 |
| Temperature Range | -70°C to +150°C |
| Humidity Range | 10–98% RH |
| Control Accuracy | ±0.3°C / ±2% RH |
| Uniformity | ±0.1°C / ±4% RH |
| Construction | SUS#304 Stainless Steel Interior & Exterior |
| Insulation | High-Density Polyurethane Foam + Silicone Foam Gasket |
| Heating System | Stainless Steel Sheathed Immersion Heater |
| Humidification | Steam Generator Type |
| Refrigeration System | Imported High-Efficiency Compressor |
| Control System | Digital SSR + PID Controller with LCD Interface |
| Safety Protections | Over-Temperature, Over-Current, Compressor Overload, Low-Water Level |
| Power Supply | AC 1/3 Phase, 220/380 V, 50/60 Hz |
| Standard Internal Dimensions (W×D×H) | 100 × 80 × 100 cm |
| Compliance | Designed for ASTM D4329, ISO 4892-2, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-30, and GLP-aligned test documentation workflows |
| Brand | LabCompanion |
|---|---|
| Model | LT-150 |
| Temperature Range | –40 °C to +150 °C |
| Humidity Range | 10–98 %RH |
| Control Accuracy | ±0.3 °C / ±2 %RH |
| Uniformity | ±0.1 °C / ±4 %RH |
| Construction | SUS#304 Stainless Steel Interior & Exterior |
| Insulation | High-Density PU Foam + Silicone Sponge Gasket |
| Heating System | Stainless Steel Sheathed Immersion Heater |
| Humidification | Steam Generator (PID-Controlled) |
| Refrigeration | Imported High-Efficiency Compressor |
| Controller | Programmable Digital PID with LCD Interface |
| Power Supply | AC 3-Phase 380 V, 50/60 Hz |
| Compliance | Designed per IEC 60068-2 series, ASTM D4332, ISO 16750-4, and JEDEC JESD22-A101 for LED reliability validation |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Model | LT-150 |
| Temperature Range | –40°C to +150°C |
| Humidity Range | 10–98% RH |
| Temperature Control Accuracy | ±0.3°C |
| Humidity Control Accuracy | ±2% RH |
| Temperature Uniformity | ±0.1°C |
| Humidity Uniformity | ±4% RH |
| Interior Dimensions (W×D×H) | 50×60×75 cm |
| Exterior Dimensions (W×D×H) | 117×92×160 cm |
| Construction | SUS#304 Stainless Steel Interior & Exterior |
| Insulation | High-Density Polyurethane Foam + Silicone Foam Seals |
| Heating System | Stainless Steel Sheathed Immersion Heaters |
| Humidification | Steam Generator with RO-Purified Water Supply |
| Refrigeration System | Imported High-Efficiency Compressor |
| Control System | Digital PID Controller with SSR Output |
| Standard Features | Vacuum Double-Glass Viewing Window, Adjustable Shelving, Interior LED Lighting, Casters, Linear Analog Outputs (0–10 V / 4–20 mA) for External Data Logging |
| Safety Protections | Over-Temperature, Over-Current, Compressor Overload, Low-Water-Level, Phase Failure Detection |
| Power Supply | 3-Phase AC 380 V / 50 Hz (Customizable for 60 Hz or Single-Phase) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LTS-150-3P |
| Pricing | Upon Request |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LTS-252-3PA |
| Temperature Range (High Zone) | +60 °C to +200 °C |
| Temperature Range (Low Zone) | −65 °C to −10 °C |
| Internal Chamber Dimensions | 80 × 80 × 75 cm |
| Temperature Resolution | ±0.1 °C |
| Control System | PID with ETAC830 Touchscreen Controller (10.4″ TFT, Multi-language UI) |
| Program Storage | 1000 programs / 2500 segments |
| Cycle Repetition | Up to 999 cycles |
| Recovery Time (−65 °C → +150 °C) | ≈5 min |
| Cooling Method | Dual-stage mechanical refrigeration (no LN₂ or CO₂ required) |
| Compliance | Designed for ISO 16750-4, JEDEC JESD22-A104, MIL-STD-810H thermal shock protocols |
| Power Supply | AC 3φ 380–415 V ±10%, 50/60 Hz |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LTS-80-2P (Two-Chamber, Specimen-Transfer Design) |
| Temperature Range | −40 °C to +100 °C (optional +150 °C) |
| Low-Temp Chamber | −70 °C to −10 °C |
| High-Temp Chamber | +60 °C to +200 °C |
| Specimen Weight Capacity | 2.5 kg |
| Transfer Time | ≤10 s |
| Temp. Rise Time (−40 °C → +100 °C) | 40 min |
| Temp. Fall Time (+100 °C → −40 °C) | 70 min |
| Chamber Dimensions (L×W×H, mm) | Low-Temp: 400×500×400 |
| High-Temp | 400×400×400 |
| Test Zone | 200×130×200 |
| Control System | Microprocessor-based PID + SSR |
| Refrigerant | Eco-friendly HFC blend |
| Internal Material | SUS304 stainless steel |
| External Finish | Zinc-coated steel with high-grade resin enamel coating |
| Safety Protections | Overheat protection, compressor overload protection, control system overload protection, high/low pressure cut-off switches |
| Optional Interfaces | RS-232 serial communication port |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LTS-80-2P (Two-Chamber Moving Specimen Type) |
| Temperature Range | −40 °C to +100 °C (optional +150 °C) |
| Low-Temp Chamber | −70 °C to −10 °C |
| High-Temp Chamber | +60 °C to +200 °C |
| Specimen Weight Capacity | 2.5 kg |
| Specimen Transfer Time | ≤10 s |
| Temp. Rise Time (−40 °C → +100 °C) | 40 min |
| Temp. Fall Time (+100 °C → −40 °C) | 70 min |
| Test Chamber Dimensions (W×H×D) | 200×130×200 mm |
| Low-Temp Chamber Dimensions | 400×500×400 mm |
| High-Temp Chamber Dimensions | 400×400×400 mm |
| Control System | Microprocessor-based PID + SSR |
| Refrigerant | HFC-series eco-friendly refrigerant |
| Internal Material | SUS304 stainless steel |
| External Material | Galvanized steel with high-grade resin enamel coating |
| Safety Protections | Overheat protection, compressor overload protection, control system overload protection, high/low pressure cut-off switches |
| Optional Interfaces | RS-232 serial communication port |
| Brand | LabCompanion |
|---|---|
| Model | LTS-80-3PA |
| Chamber Type | Three-Zone Static Specimen Configuration |
| Temperature Range (High Zone) | 80–150 °C |
| Temperature Range (Low Zone) | 0 to –65 °C |
| Preconditioning Range | 80–200 °C / 0 to –70 °C |
| Soak Time (High/Low) | 25 min (adjustable) |
| Transfer Time (Recovery) | ≤5 min (configurable) |
| Temperature Stability | ±2 °C |
| Internal Dimensions (W×D×H) | 600×450×400 mm |
| Max. Specimen Weight | 10 kg |
| Power Supply | AC 3-phase, 220/380 V, 50/60 Hz |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (Guangdong Hongzhan Instrument Co., Ltd.) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | LTS-80-3PA |
| Pricing | Available Upon Request |
| Internal Chamber Dimensions (W×D×H) | 350×400×350 mm |
| External Dimensions (W×D×H) | 1520×1550×1950 mm |
| Max. Test Specimen Weight | 2 kg |
| High-Temperature Zone Range | +80 °C to +150 °C |
| Low-Temperature Zone Range | 0 °C to −65 °C |
| Preconditioning Temperature Range | +80 °C to +200 °C / 0 °C to −70 °C |
| Preconditioning Ramp-Up Time | ~25 min |
| Preconditioning Ramp-Down Time | ~70 min |
| Dwell Time per Temperature Zone | 25 min (adjustable) |
| Transfer Time (Cold ↔ Hot) | ≤5 min (adjustable) |
| Temperature Uniformity | ±2 °C |
| Power Supply | AC 3-phase, 220/380 V, 50/60 Hz |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LY-512 |
| Temperature Range | +10°C to +60°C (above ambient) |
| Rainfall Intensity | 10–20 cm/h (measured at turntable surface, adjustable) |
| Water Pressure | 80–892 kPa |
| Wind Speed | 5–18 m/s (horizontal center velocity at air inlet near turntable) |
| Test Duration | 0–999 min (programmable) |
| Spray Arm Oscillation Angles | 60°, 90°, 135° |
| Nozzle Orifice Diameter/Spacing | 0.4 mm / 50 mm |
| Water Flow Rate | 0.6 L/min (adjustable) |
| Turntable Diameter | Ø350 mm |
| Turntable Speed | 1–17 rpm |
| Internal Chamber Dimensions | 800 × 800 × 800 mm (W×H×D) |
| External Dimensions | 1250 × 1800 × 1100 mm (W×H×D) |
| Handheld Sprayer | ~100 × Ø1 mm orifices, 1 m spray distance, 0°–90° adjustable nozzle angle |
| Nozzle-to-Specimen Distance | ≤250 mm |
| Total Water Supply Flow | 25.4 L/min (adjustable) |
| Drive System | Imported frequency inverters for oscillation and rotation control |
| Heating System | Stainless steel finned electric heater |
| Temperature Sensor | PT100 platinum resistance thermometer |
| Control Interface | Color TFT touchscreen programmable controller |
| Cabinet Construction | Outer shell — brushed SUS304 stainless steel |
| Safety Protections | Leakage current cutoff, overcurrent protection, water pressure monitoring, overload fuse, audible alarm, grounding fault detection |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | 302A |
| Temperature Range | +10°C to +70°C (above ambient) |
| Temperature Uniformity | ≤ ±1°C |
| Humidity Range | 50–95% RH (dependent on temperature |
| Humidity Accuracy | +2 / −3 %RH |
| Humidification Method | Spray-type water atomization |
| Heating Power | 2.3 kW |
| Voltage | 220 V, 50 Hz |
| Internal Chamber Dimensions (W×D×H) | 500 × 400 × 500 mm |
| External Dimensions (W×D×H) | 900 × 570 × 1510 mm |
| Net Weight | 170 kg |
| Chamber Construction | Stainless steel interior, powder-coated mild steel exterior |
| Safety Features | Overcurrent protection, operational status indicators for heating, humidification, and water tank heating |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | NC-OVEN Series |
| Temperature Uniformity (Natural Convection) | ≤ ±1.5°C (at steady state, per IEC 60068-2-2 / GB/T 2423.2) |
| Max Operating Temperature | 150°C |
| Temperature Resolution | 0.1°C |
| Data Logging Channels | ≥ 20 simultaneous thermocouple inputs |
| Supported Thermocouple Types | B, E, J, K, N, R, S, T |
| Control Interface | Touchscreen HMI with USB export |
| Software | LabCompanion TempTrack™ (multilingual: EN/zh-CN/zh-TW), Excel report generation, curve overlay & delta-T analysis |
| Compliance | IEC 60068-2-2, GB/T 2423.2-2008 (Clause 3.3.1), GB/T 2423.2-89 (3.1.1 & 3.3.1), ISO/IEC 17025-aligned validation support |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | OVEN |
| Instrument Type | Vacuum Drying Oven |
| Temperature Range | R.T. to +300 °C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5 °C |
| External Dimensions | 620 × 530 × 490 mm |
| Internal Chamber Dimensions | 340 × 320 × 320 mm |
| Chamber Material | SUS304 Stainless Steel (≤300 °C) or Pre-galvanized Steel |
| Heating Method | Forced-air Convection & Thermal Oil Heating |
| Control System | Microprocessor-based PID Controller with PT100 Sensor |
| Timer Range | 0–999 min |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Safety Features | Independent Over-Temperature Protection Circuit, Silicone Door Seal, Mineral Wool Insulation |
| Compliance | JB/T 5520–1991 (Technical Specification for Drying Ovens) |
| Optional Accessories | Programmable Temperature Controller, RS232/RS485 Interface, Chart Recorder, Observation Window, Cable Port (Φ50 mm), Additional Shelving |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OVEN-100-4C |
| Temperature Range | RT to 200 °C |
| Temperature Uniformity | ≤2 °C |
| Temperature Fluctuation | ≤±0.5 °C |
| Temperature Deviation | ≤±2.0 °C |
| Heating Rate | 3.5 °C/min (average, no-load, from ambient +20 °C to 200 °C) |
| Internal Dimensions (W×H×D) | 500×500×400 mm |
| Chamber Volume | 100 L per zone |
| Total Zones | 4 independent temperature-controlled chambers |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | OVEN-128 |
| Temperature Range | RT+10°C to 300°C |
| Temperature Uniformity | ±1.0°C (at setpoint, measured at 9 points per IEC 60068-3-5) |
| Chamber Dimensions (W×H×D) | 450 mm × 550 mm × 520 mm |
| Internal Volume | 128 L |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | OVEN-216 |
| Price Range | USD 1,400 – 3,150 |
| Max Operating Temperature | 200–300 °C |
| Product Type | Hot Air Aging Test Chamber |
| Category | Aging Chamber |
| Temperature Range | Ambient +10 °C to 300 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from ambient +20 °C to 200 °C, no-load) |
| Cooling Rate | 0.7–1.0 °C/min (natural convection cooling) |
| Interior Dimensions (W×H×D) | 600 × 600 × 600 mm |
| Power Supply | 220 V AC, 50/60 Hz |
| Total Power | 3.8 kW |
| Net Weight | 180 kg |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OVEN-91 |
| Price Range | USD 1,400–7,000 (FOB) |
| Max Operating Temperature | 150–200 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | (Ambient +20) °C → 200 °C in ≤40 min (standard configuration), ≤60 min (with optional insulation or larger volume) |
| Cooling Rate | 0.7–1.0 °C/min |
| Internal Construction | AISI 304 stainless steel welded chamber |
| External Casing | Powder-coated carbon steel |
| Viewing Window | Double-layer tempered glass |
| Air Circulation | High-temperature-rated centrifugal blower with optimized duct design |
| Control Resolution | 0.1 °C |
| Timer Range | 1–9999 minutes |
| Ambient Operating Conditions | 5–35 °C, ≤85% RH |
| Compliance | Designed to support ASTM D573, ISO 188, IEC 60068-2-1, and GB/T 3512 test protocols |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OVEN-C |
| Temperature Range | +50°C to +200°C |
| Max Operating Temperature | 150°C–200°C (configurable up to 300°C on request) |
| Temperature Uniformity | ±2.0°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Deviation | ±2.0°C |
| Heating Rate | ≤40 min (from ambient +20°C to 200°C) / ≤60 min (from ambient +20°C to 200°C, depending on chamber volume and insulation configuration) |
| Cooling Rate | 0.7–1.0°C/min |
| Construction Material | SUS304 Stainless Steel Interior |
| Insulation | High-Density Ceramic Fiber Blanket |
| Door Seal | High-Temperature Silicone Rubber Gasket |
| Safety Features | Heater/fan interlock, independent overtemperature protection, motor overcurrent/overheat protection, heater short-circuit protection |
| Control Mode | PID-based temperature controller with optional programmable ramp-soak profiles |
| Airflow Options | Horizontal or vertical forced convection (user-selectable) |
| Compliance | JB/T 5520–1991, GB/T 2423.2–2008, GJB 150.3A–2009 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | P |
| Instrument Type | Upright |
| Humidity Range | 5–98% RH |
| Temperature Fluctuation | ±2.0°C |
| Humidity Deviation | ~1.2°C/min (Note: This is a typographical error in source |
| corrected to Humidity Recovery Rate | ~1.2 %RH/min) |
| Heating Rate | ~3°C/min (20°C to +150°C, non-linear, no-load) |
| Brand | LabCompanion |
|---|---|
| Model | P-Series-1 |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Temperature Range | (Ambient) 0°C to +100°C (optional +150°C) |
| Humidity Range | 38–98% RH |
| Temperature Uniformity | ≤2°C |
| Temperature Fluctuation | ≤±0.5°C |
| Humidity Accuracy | +2 / −3% RH |
| Heating Rate | ≥2–3°C/min |
| Cooling Rate | ≤1°C/min |
| Construction | Stainless Steel Interior, Powder-Coated Cold-Rolled Steel Exterior |
| Insulation | Ultra-Fine Glass Fiber |
| Air Circulation | Single-Circuit Low-Noise Centrifugal Blower |
| Safety Protections | Leakage Protection, Compressor High-Pressure & Overheat Protection, Overcurrent & Fuse Protection, Fan Overheat Protection, Audible Alarm |
| Power Supply | AC 220V or 380V ±10%, 50 Hz |
| Operating Ambient | +5°C to +35°C |
| Compliance | GB/T 5170.5–1996 (IEC 60068-3-5 equivalent) |
| Brand | LabCompanion |
|---|---|
| Model | P-Series 1 |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Cooling System | Single-stage or Cascade Refrigeration |
| Compressor | French Tecumseh Hermetic Refrigeration Compressor |
| Controller | Shimaden (Japan), Honeywell (USA), or TEMI (Korea) Programmable PID Controller |
| Sensor | PT100 Platinum Resistance Thermometer |
| Insulation | Glass Fiber + Rigid Polyurethane Foam |
| Air Circulation | Single-loop, Extended-shaft Stainless Steel Centrifugal Fan |
| Humidification | Electric Steam Generator + Saturated Gas Humidification |
| Safety Protections | Leakage Current Protection, Over-Temperature Cut-off, Fast-Blow Fuse, Compressor High-Pressure Protection |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | Cold-Rolled Steel with Electrostatic Powder Coating |
| Standards Compliance | GB/T 10586–2014, GB/T 2423.3–2016 (IEC 60068-2-78), GB/T 2423.4–2016 (IEC 60068-2-30) |
| Temperature Range Options | RT+10°C to +150°C (A), 0°C to +150°C (B), −20°C to +150°C (C), −40°C to +150°C (D), −70°C to +150°C (E) |
| Temperature Uniformity | ≤ ±0.5°C (fluctuation), ≤ 2°C (uniformity) |
| Ramp Rate Options | 0.7–1°C/min (standard), up to 10°C/min (optional) |
| Humidity Range | 30–98% RH |
| Humidity Fluctuation | ±2–3% RH |
| Standard Ports | One 220×180 mm Double-Glazed Observation Window, One Ø50 mm Test Port, Two Adjustable Stainless Steel Sample Shelves, Interior LED Lighting |
| Power Supply | 220 VAC / 380 VAC, 50 Hz |