LabCompanion
Filter
Showing 61–90 of 483 results
| Key | Brand: LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | DHG-9005D |
| Temperature Range | RT+10°C to 300°C |
| Temperature Uniformity | ±0.5°C |
| Internal Dimensions (W×D×H) | 300×280×350 mm |
| External Dimensions (W×D×H) | 445×490×700 mm |
| Chamber Material | Stainless Steel (1Cr18Ni9Ti) |
| Heating Method | Forced-Air Circulation |
| Power Supply | AC 220 V, 50 Hz |
| Temperature Resolution | 0.1°C |
| Timer Range | 1–9999 min/h |
| Controller Type | Intelligent Programmable LCD Controller |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Line | EK Series |
| Pricing | Available Upon Request |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic |
| Model | FA |
| Temperature Range | −40 °C to +150 °C |
| Refrigeration Method | Compressor-Based Cooling |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | 3.0–3.5 °C/min |
| Cooling Rate | 1.2 °C/min |
| Internal Chamber Dimensions | 600 × 600 × 700 mm |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | FO-800 |
| Pricing | Available Upon Request |
| Temperature Range | RT + 10°C to 200°C (standard), optional up to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤60 min (from RT to 200°C) |
| Chamber Volume | 72 L (FO-800 base configuration) |
| Interior Dimensions (W×D×H) | 450 × 400 × 400 mm |
| Exterior Dimensions (W×D×H) | 610 × 575 × 905 mm |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Control System | Microprocessor-based PID controller with auto-tuning |
| Temperature Sensor | Industrial-grade PT100 platinum resistance thermometer |
| Heating Element | Nickel-chromium alloy sheathed heater |
| Air Circulation | Forced convection via centrifugal blower |
| Insulation | High-density ultra-fine glass fiber (≥100 mm thickness) |
| Interior Material | Mirror-finish SUS304 stainless steel |
| Exterior Material | Powder-coated cold-rolled steel |
| Viewing Window | Double-layer heat-resistant tempered glass |
| Door Seal | Environmentally compliant silicone rubber gasket |
| Exhaust Port | Φ45 mm (rear-mounted, single) |
| Safety Features | Independent over-temperature cut-off, thermal fuse, and over-current circuit breaker |
| Compliance | JB/T 5520–1991 “Technical Specifications for Drying Ovens” |
| Standard Accessories | 2 adjustable stainless steel shelves, 4 shelf supports, user manual |
| Optional Accessories | Programmable temperature controller (up to 99 segments), RS485 communication interface, additional shelves, cable ports |
| Brand | LabCompanion |
|---|---|
| Model | FO-8000 |
| Temperature Range | 100–800 °C |
| Chamber Dimensions (W×H×D) | 300×200×120 mm |
| External Dimensions (approx.) | 450×450×580 mm |
| Control System | Microprocessor-Based PID Controller with Digital Keypad Input |
| Heating Element | Embedded Ceramic Heating Plates with Kanthal A1 Resistance Wire |
| Insulation | Lightweight Ceramic Fiber Liner (Dual-Layer Shell) |
| Safety Features | Automatic Spring-Loaded Door, Over-Temperature Protection, Thermal Cut-Out, Ground Fault Detection |
| Compliance | Designed for GLP/GMP-aligned laboratory workflows |
| Brand | LabCompanion |
|---|---|
| Model | FQY Series |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (Guangdong) Co., Ltd. |
| Compliance | GB/T 2423.17, IEC 60068-2-11, ISO 9227, GB/T 10587 |
| Temperature Range | Ambient to 50 °C (FQY010A) |
| Temperature Uniformity | ≤1 °C |
| Temperature Fluctuation | ±1 °C |
| Salt Spray Deposition Rate | 1.0–2.0 mL/80 cm²·h |
| Spray Modes | Continuous or Cyclic |
| Power Supply | 380/220 V, 50 Hz, 3-phase 4-wire |
| Total Power | 3–10 kW |
| Internal Dimensions (D×W×H, mm) | 500×500×400 to 1000×2000×900 |
| External Dimensions (D×W×H, mm) | 860×1270×1120 to 1500×3000×2000 |
| Net Weight | 150–1250 kg |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model Series | FT-40/FT-50/FT-60, LT-40/LT-50/LT-60, TT-40/TT-50/TT-60 |
| Temperature Range (Test Zone) | −35 °C to 150 °C (FT), −55 °C to 150 °C (LT), −65 °C to 150 °C (TT) |
| Temperature Transition Method | Static Specimen with Dual- or Triple-Zone Air-Switching |
| Temp. Rise Time (−35 → +150 °C) | 30–40 min |
| Temp. Fall Time (+150 → −35 °C) | 60–80 min |
| Temperature Stabilization Time | 5–10 min |
| Test Chamber Volume | 35–60 L |
| External Dimensions | 140–220 cm (H/W/D) |
| Payload Capacity | 2.2–7.5 kg |
| Refrigeration System | Single-stage (FT) or Dual-stage (LT/TT) |
| Condensation | Air-cooled or Water-cooled |
| Refrigerant | HFC-based Eco-friendly Refrigerant |
| Control System | Microprocessor-based Programmable Controller with PID + SSR Regulation |
| Chamber Material | SUS304 Stainless Steel |
| Safety Protections | Compressor Overload Protection, High/Low Pressure Switches, Controller Overcurrent Protection |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GFLY |
| Power Supply | 380 V ±10%, 50 Hz, 3-phase 4-wire + PE |
| Total Power | 24 kW |
| Interior Dimensions | 1500 × 1500 × 1600 mm (D×W×H) |
| Exterior Dimensions | 2291 × 4200 × 3411 mm (D×W×H) |
| Test Table | Ø800 mm, 1–10 rpm, Load Capacity ≥65 kg |
| Rainfall Intensity | 10–20 cm/h (adjustable) |
| Raindrop Diameter | 0.5–4.5 mm |
| Wind Speed Range | 5–18 m/s (measured at centerline of turntable inlet) |
| Water Pressure (Rain) | 80–100 kPa |
| Water Pressure (Waterjet) | ≥276 kPa |
| Temperature Range | RT+10°C to +55°C |
| Test Duration | 0–999 min (programmable, cyclic capable) |
| Compliance | GJB 150.8-1986 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GZX |
| Power Options | 3.0 kW / 4.0 kW / 6.0 kW |
| Temperature Range | RT+10°C to 300°C or RT+20°C to 450°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (RT+10°C → 300°C) / ≤80 min (RT+20°C → 450°C) |
| Air Exchange Rate | 5–200 cycles/hour |
| Internal Dimensions (W×D×H, cm) | 50×60×75 |
| External Dimensions (W×D×H, cm) | 67×106×96 |
| Control System | Microprocessor-based PID controller with auto-tuning |
| Temperature Sensor | Industrial-grade PT100 platinum resistance thermometer |
| Display | LED digital display for both setpoint and actual temperature |
| Timer Range | 0–999 minutes |
| Construction | Cold-rolled steel outer shell with epoxy powder coating |
| Interior options | SUS304 stainless steel (BN variant) or high-temp silver-painted cold-rolled steel (N variant) |
| Insulation | High-density polyurethane foam + glass fiber composite |
| Door Seal | Eco-friendly silicone rubber gasket |
| Heating Element | Ni-Cr alloy wire heater |
| Safety Features | Independent over-temperature protection, thermal cut-off, over-current circuit breaker |
| Standard Compliance | JB/T 5520–1991 Technical Specifications for Drying Ovens |
| Optional Accessories | Programmable temperature controller, RS232/RS485 communication port, chart recorder, additional shelves, observation window, Φ50 cable feedthrough |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GZX-14 |
| Pricing | Upon Request |
| Internal Dimensions (W×H×D) | 450×400×400 mm / 550×500×500 mm / 650×600×600 mm |
| External Dimensions | 610×905×575 mm / 710×1025×675 mm / 810×1175×775 mm |
| Construction | Exterior – Powder-Coated Steel |
| Insulation | High-Efficiency Compressed Glass Wool |
| Heating System | Finned-Tube Electric Heaters |
| Air Circulation | Forced Convection with Optimized Outlet Design |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Uniformity | ±1.5°C at setpoint |
| Temperature Stability | ±1.0°C |
| Control System | Microprocessor-Based PID Controller with Dual Display (Setpoint & Actual), Auto-Tuning Function |
| Safety Protections | Dual-Stage Overtemperature Protection (ALM1 Visual/Audible Alert + ALM2 Cut-off), MCCB Overload Protection, Ceramic Fuse, Non-Fuse Circuit Breaker, Post-Heating Fan Delay Shutdown |
| Power Supply | 3-phase 380 VAC ±10% or Single-Phase 220 VAC ±10% |
| Accessories | 2–6 Adjustable Stainless Steel Shelves |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GZX1 |
| Power Options | 3.0 kW / 4.0 kW / 6.0 kW |
| Temperature Range | RT+10°C to 300°C or RT+20°C to 450°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (RT+10→300°C), ≤80 min (RT+20→450°C) |
| Air Exchange Rate | 5–200 cycles/hour |
| Internal Dimensions (W×D×H, cm) | 50×60×75 |
| External Dimensions (W×D×H, cm) | 67×106×96 |
| Control System | Microprocessor-based PID controller with auto-tuning |
| Temperature Sensor | Industrial-grade PT100 platinum resistance thermometer |
| Display | LED digital display for both setpoint and actual temperature |
| Timer Range | 0–999 minutes |
| Insulation | High-density polyurethane foam + glass fiber |
| Door Seal | Environmentally compliant silicone rubber gasket |
| Heating Element | Ni-Cr alloy wire heater |
| Safety Features | Independent over-temperature protection, thermal cutoff fuse, over-current circuit breaker |
| Standard Compliance | JB/T 5520–1991 Technical Specifications for Drying Ovens |
| Optional Accessories | Programmable temperature controller, RS232/RS485 communication port, chart recorder, additional shelves, observation window, Φ50 cable feedthrough |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GZX2 |
| Construction | Cold-Rolled Steel Exterior with Epoxy Powder Coating |
| Interior | SUS304 Stainless Steel (BN variant) or High-Temperature Silver-Painted Cold-Rolled Steel (N variant) |
| Insulation | High-Density Polyurethane Foam + Glass Fiber |
| Door Seal | Eco-Friendly Silicone Rubber Gasket |
| Heating Element | Nickel-Chromium Alloy Resistance Heater |
| Temperature Controller | Imported Intelligent PID Controller with Auto-Tuning |
| Temperature Sensor | Industrial Platinum RTD (PT100) |
| Display | LED Digital Display for Both Setpoint and Actual Temperature |
| Temperature Range | R.T.+10°C to 300°C / R.T.+20°C to 450°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (R.T.+10°C → 300°C) |
| Air Circulation | Forced Convection via Horizontal Centrifugal Fan |
| Air Exchange Rate | 5–200 times/hour |
| Timer Range | 0–999 minutes |
| Power Supply | AC 220 V ±10%, 50 Hz ±0.5 Hz |
| Power Rating | 3.0 kW / 4.0 kW / 6.0 kW |
| Internal Dimensions (W×D×H, cm) | 50×60×75 |
| External Dimensions (W×D×H, cm) | 67×106×96 |
| Safety Features | Independent Over-Temperature Protection, Thermal Cut-Off, Over-Current Circuit Breaker |
| Standard Compliance | JB/T 5520–1991 Technical Specification for Drying Ovens |
| Optional Accessories | Programmable Temperature Controller, RS232/RS485 Communication Port, Chart Recorder, Additional Shelving, Observation Window, Φ50 Cable Entry Port |
| Brand | LabCompanion |
|---|---|
| Model | HC Series |
| Type | High-Humidity Environmental Test Chamber |
| Internal Dimensions (W×H×D) | 71 × 71 × 72 cm |
| Test Temperature | 49 °C ± 1 °C |
| Relative Humidity | 98 % ± 1 % |
| Sample Capacity | 36 pcs |
| Airflow Rate | 0.8 m³/hr |
| Specimen Rotation Speed | 1/3 rpm |
| Net Weight | 110 kg |
| Overall Dimensions (W×H×D) | 91 × 91 × 132 cm |
| Power Supply | 1Ø, 220 V, 50/60 Hz, 3 kW |
| Compliance Standards | ASTM D1748, JIS E-0236, MIL-STD-1617, JAN H792, NDS K2801 |
| Brand | LabCompanion |
|---|---|
| Model | HC Series |
| Type | Humidity & High-Temperature Corrosion Resistance Tester |
| Standards Compliance | ASTM D1748, JIS E-0236, MIL-STD-1617, JAN H792, NDS K2801 |
| Internal Chamber Dimensions (W×H×D) | 71 × 71 × 72 cm |
| Test Temperature | 49 °C ± 1 °C |
| Relative Humidity | 98 %RH ± 1 %RH |
| Sample Capacity | 36 specimens |
| Airflow Rate | 0.8 m³/hr |
| Specimen Rotation Speed | 1/3 rpm |
| Net Weight | 110 kg |
| External Dimensions (W×H×D) | 91 × 91 × 132 cm |
| Power Supply | 1-phase, 220 V, 50/60 Hz, 3 kW |
| Brand | LabCompanion |
|---|---|
| Model | HC Series |
| Type | Humidity Testing Chamber |
| Compliance | ASTM D1748, JIS E-0236, MIL-STD-1617, NDS K2801, JAN-H792 |
| Internal Dimensions (W×H×D) | 71×71×72 cm |
| Test Temperature | 49°C ±1°C |
| Relative Humidity | 98% ±1% |
| Specimen Capacity | 36 pcs |
| Air Flow Rate | 0.8 m³/hr |
| Specimen Rotation Speed | 1/3 rpm |
| Net Weight | 110 kg |
| External Dimensions (W×H×D) | 91×91×132 cm |
| Power Supply | 1φ, 220 V, 50/60 Hz, 3 kW |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (Hongzhan) |
| Brand | LabCompanion |
|---|---|
| Model | HC-1000 |
| Chamber Internal Dimensions | 1000 × 1000 × 1000 mm |
| Temperature Range | –70 °C to +150 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2 °C |
| Cooling Rate | 1.0–1.2 °C/min |
| Power Consumption | 12 kW |
| Supply Voltage | AC 380 V, 50 Hz |
| Construction | Stainless steel inner chamber, powder-coated cold-rolled steel outer shell |
| Safety Protections | Over-temperature, over-pressure, and phase-loss monitoring with audible/visual alarm |
| Compliance | GB/T 10589–2008, GB/T 2423.1–2012, GB/T 2423.2–2012, IEC 60068-2-1, IEC 60068-2-2 |
| Brand | LabCompanion |
|---|---|
| Model | HC-120 |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Internal Chamber Dimensions | 500 × 600 × 400 mm (W × H × D) |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2 °C |
| Cooling Rate | 1.0–1.2 °C/min |
| Power Consumption | 3 kW |
| Supply Voltage | AC 380 V, 50 Hz |
| Construction | Stainless Steel Interior + Powder-Coated Cold-Rolled Steel Exterior |
| Safety Protections | Over-Temperature, Over-Pressure, and Phase-Failure Alarms |
| Brand | LabCompanion |
|---|---|
| Model | HC-150 |
| Internal Chamber Dimensions | 500 × 600 × 500 mm (W×H×D) |
| Temperature Range | −70°C to +150°C |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Deviation | ±2°C |
| Cooling Rate | 1.0–1.2°C/min |
| Power Supply | AC380V, 50 Hz |
| Rated Power | 4 kW |
| Construction | Stainless steel inner chamber, cold-rolled steel outer shell with epoxy coating |
| Safety Protections | Over-temperature, over-pressure, and phase-loss monitoring with audible/visual alarms |
| Compliance | Designed per IEC 60068-2 series environmental testing standards |
| Refrigeration System | Imported hermetic compressor with cascade refrigeration for sub-zero operation |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HC-225 |
| Quotation | Upon Request |
| Internal Chamber Dimensions | 500 × 750 × 600 mm (W × H × D) |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2 °C |
| Cooling Rate | 1.0–1.2 °C/min |
| Power Supply | AC 380 V, 50 Hz |
| Total Power Consumption | 5 kW |
| Construction | Stainless steel interior chamber, cold-rolled steel exterior with powder coating |
| Safety Protections | Over-temperature, over-pressure, and phase-loss alarms |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HC Series |
| Pricing | Upon Request |
| Internal Volume | 80 L |
| Internal Dimensions (W×H×D) | 400 × 500 × 400 mm |
| Temperature Range | 0 to +150 °C |
| Temperature Uniformity | ≤ ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Heating Rate | 0 → +150 °C in ≤20 min (~3 °C/min) |
| Cooling Rate | +20 → 0 °C in ≤20 min (~1 °C/min) |
| Refrigerant | R507 (HFC-based, ozone-friendly) |
| Control System | VT9620 Fixed-Setpoint PID Controller (Taiwan-made, LED display, ±0.1 °C resolution) |
| Construction | SUS304 stainless steel interior & exterior with powder-coated cold-rolled steel option |
| Insulation | High-density polyurethane foam + fiberglass |
| Cooling Method | Single-stage or cascade mechanical compression (air-cooled condenser) |
| Safety Protections | Independent over-temperature cut-off, low-water alarm, compressor overload/overcurrent protection, high-pressure refrigerant switch, earth leakage circuit breaker, phase failure detection |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HC Series |
| Pricing | Upon Request |
| Internal Volume | 80 L |
| Internal Dimensions (W×H×D) | 400 × 500 × 400 mm |
| Temperature Range | 0 to +150 °C |
| Temperature Uniformity | ≤ ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Heating Rate | 0 → +150 °C in ≤20 min (~3 °C/min) |
| Cooling Rate | +20 → 0 °C in ≤20 min (~1 °C/min) |
| Refrigerant | R507 (HFC-based, environmentally compliant) |
| Control System | VT9620 Fixed-Value PID Controller (Taiwan-made, LED display, ±0.1 °C resolution) |
| Construction | SUS304 stainless steel interior & exterior with powder-coated finish |
| Insulation | High-density polyurethane foam + fiberglass |
| Cooling Method | Single-stage or cascade mechanical compression (air-cooled condenser) |
| Safety Protections | Independent over-temperature cutoff, low-water alarm, compressor overload/overcurrent protection, high-pressure refrigerant switch, earth-leakage circuit breaker, and thermal fuse |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | HC-80 |
| Pricing | Upon Request |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HC-80 |
| Pricing | Upon Request |
| Internal Volume | 80 L |
| Internal Dimensions (W×H×D) | 400 × 500 × 400 mm |
| Temperature Range | 0 to +150 °C |
| Temperature Uniformity | ≤ ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Ramp Rate (Heating) | ≤20 min (0 → +150 °C, ~3 °C/min) |
| Ramp Rate (Cooling) | ≤20 min (+20 → 0 °C, ~1 °C/min) |
| Refrigerant | R507 (HFC-based, ozone-friendly) |
| Control System | VT9620 Fixed-Setpoint PID Controller (Taiwan-made, LED display, ±0.1 °C resolution) |
| Construction | SUS304 Stainless Steel Interior & Exterior (Optional Powder-Coated Cold-Rolled Steel Shell) |
| Insulation | High-Density Polyurethane Foam + Glass Fiber |
| Cooling Method | Single-Stage or Dual-Stage Mechanical Compression (Air-Cooled Condenser) |
| Safety Protections | Independent Over-Temperature Cut-off, Compressor Overload/Overcurrent Protection, High-Pressure Refrigerant Switch, Water-Level Detection, Leakage Current Protection, Short-Circuit Breaker |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HC-80 |
| Price | Upon Request |
| Internal Volume | 80 L |
| Interior Dimensions (W×H×D) | 400 × 500 × 400 mm |
| Temperature Range | 0 to +150 °C |
| Temperature Uniformity | ≤ ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Heating Rate | 0 → +150 °C in ≤20 min (~3 °C/min) |
| Cooling Rate | +20 → 0 °C in ≤20 min (~1 °C/min) |
| Refrigerant | R507 (HFC-based, ozone-friendly) |
| Control System | VT9620 Fixed-Setpoint PID Controller (Taiwan-made, LED display, 0.1 °C resolution) |
| Construction | SUS304 stainless steel interior & exterior with powder-coated finish |
| Insulation | High-density polyurethane foam + fiberglass |
| Cooling Method | Single-stage or cascade mechanical compression refrigeration (air-cooled condenser) |
| Safety Protections | Independent overtemperature cutoff, low-water alarm, compressor overload/overcurrent protection, high-pressure refrigerant switch, earth leakage circuit breaker, phase failure detection |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HC-80 |
| Temperature Range | –0 °C to +100 °C (optional up to +150 °C) |
| Temperature Uniformity | ≤2 °C |
| Temperature Fluctuation | ±0.5 °C (high-temp), ±1 °C (low-temp) |
| Heating Rate | ≥2–3 °C/min |
| Cooling Rate | ≤1 °C/min |
| Internal Dimensions (W×H×D) | 400×500×400 mm |
| Power Supply | AC 220 V ±10% / 50 Hz or AC 380 V ±10% / 50 Hz |
| Ambient Operating Conditions | 15–35 °C, ≤85% RH |
| Insulation | High-density ultra-fine thermal insulation cotton |
| Air Circulation | Stainless steel impeller, single-cycle forced convection with low-noise centrifugal blower |
| Safety Protections | Leakage current cutoff, compressor high-pressure/overheat/overcurrent protection, fuse overload protection, fan overheat protection, audible alarm |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | HC-80S |
| Temperature Range (Standard Configuration) | -70°C to +150°C |
| Temperature Uniformity | ±0.5°C |
| Temperature Accuracy | ±0.3°C |
| Internal Dimensions (W×D×H) | 400×500×400 mm |
| External Dimensions (W×D×H) | 880×1650×920 mm |
| Interior Material | SUS304 Stainless Steel Mirror Finish |
| Exterior Material | Brushed Stainless Steel or Powder-Coated Steel |
| Insulation | Rigid Polyurethane Foam (Glass Wool at ≥150°C) |
| Refrigeration System | Hermetically Sealed Compressor |
| Control System | Korean-Made English LCD PID Controller with LAN Interface Option |
| Operating Modes | Constant & Programmable Cycling |
| Sensor | PT100 Platinum Resistance Thermometer |
| Power Supply | AC220V/50Hz or AC380V/50Hz |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HD-138 |
| Quotation | Upon Request |
| Internal Chamber Dimensions (H×W×D) | 750 × 600 × 500 mm |
| External Dimensions (H×W×D) | Approx. 1230 × 1100 × 680 mm |
| Power Supply | 220 V, 50 Hz |
| Heating Power | 4.0 kW |
| Operating Temperature Range | Ambient +10 °C to 250 °C |
| Temperature Uniformity | ±1.6% of setpoint |
| Air Circulation | Dual-channel horizontal forced-air system |
| Outer Casing | Cold-rolled steel with light-gray powder coating |
| Inner Chamber & Air Duct | SUS430 stainless steel (≥1.2 mm thickness) |
| Heating Element | Stainless steel sheathed tubular heaters (bottom-mounted) |
| Insulation | 80 mm thick glass wool |
| Blower Motor | 40 W |
| Temperature Controller | Digital PID controller with LED display, Pt100 RTD sensor |
| Timer Function | 0.01–99.99 h with audible alarm and automatic heating cutoff |
| Safety Protections | Short-circuit, overload, motor thermal overload, phase-loss protection |
| Standard Accessories | 2 stainless steel wire shelves |
| Brand | LabCompanion |
|---|---|
| Model | HD-235 |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Power Supply | 220 V, 50 Hz |
| Heating Power | 4.0 kW |
| Operating Temperature Range | Ambient +10 °C to 250 °C |
| Temperature Uniformity | ±1.6% of setpoint |
| Control Accuracy | ±0.5 °C |
| Heating Rate | Ambient to 100 °C in ≈15 min |
| Chamber Dimensions (W×D×H) | 600 × 500 × 750 mm |
| External Dimensions (W×D×H) | 1100 × 680 × 1230 mm |
| Insulation | 80 mm glass wool |
| Heating Element | Stainless steel tubular heaters (bottom-mounted) |
| Air Circulation | Dual-channel horizontal forced-air system |
| Fan Motor | 40 W |
| Temperature Sensor | Pt100 platinum resistance thermometer |
| Controller | Digital PID with LED display, keypad input, auto-tuning |
| Timer Function | 0.01–99.99 h (auto-cut-off + audible alert) |
| Safety Protections | Short-circuit, overload, phase-loss, motor thermal overload, overtemperature cut-off |
| Standard Accessories | 2 stainless steel wire shelves (SUS430, ≥1.2 mm thick) |
| Outer Casing | SECC cold-rolled steel (≥1.5 mm), powder-coated light gray finish |
| Inner Chamber & Air Ducts | SUS430 stainless steel (≥1.2 mm thick) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | HD-72 |
| Pricing | Available Upon Request |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ≤2 °C |
| Temperature Fluctuation | ≤±0.5 °C |
| Ramp Rate Options | 0.7–1 °C/min (standard), optional 3/5/10 °C/min |
| Internal Dimensions (W×H×D mm) | 400×500×400 to 1000×1000×1000 |
| External Dimensions (W×H×D mm) | 1000×1430×850 to 1500×1930×1450 |
| Refrigeration System | Dual-stage cascade refrigeration with imported Tecumseh hermetic compressors |
| Insulation | Polyurethane rigid foam + rock wool composite |
| Control System | Microprocessor-based touchscreen controller with Pt100 platinum RTD sensors |
| Humidity Control (if equipped) | ±2% RH stability |
| Safety Protections | Over-temperature cutoff, compressor high-pressure protection, leakage current protection, fast-blow fuses |
| Standard Accessories | Two adjustable stainless-steel shelves, vacuum-sealed double-glazed observation window, 50 mm test port, interior LED lighting, casters, status indicator LEDs |
| Brand | LabCompanion |
|---|---|
| Model | HD/HH Series |
| Temperature Range | Ambient +5°C to 300°C |
| Temperature Stability | ±1°C |
| Temperature Uniformity | ±1.5°C |
| Interior Dimensions (W×H×D) | 450×400×400 mm |
| Exterior Dimensions | 610×905×575 mm |
| Interior Material | Mirror-Finish Stainless Steel |
| Exterior Material | Powder-Coated Steel |
| Insulation | High-Density Compressed Glass Wool |
| Heating System | Finned-Tube Electric Heaters |
| Air Circulation | Forced-Air Convection with Optimized Outlet Design |
| Power Supply | 3-Phase 380 VAC ±10% or Single-Phase 220 VAC ±10% |
| Safety Protections | Bimetallic Over-Temperature Cut-Off, MCCB Overload Protection, Dual-Stage Thermal Alarm (Alarm → Cut-off), Fuse-Protected Circuit |
| Controller | Microprocessor-Based PID Temperature Controller with Setpoint & Real-Time Display |
| Accessories | 2–6 Adjustable Stainless Steel Shelves |
| Optional | Time-Based Auto-Shutdown, Programmable Ramp-Soak Profiles |