Chromatography Accessories
Filter
Showing 481–510 of 1016 results
| Brand | Elite |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Direct Manufacturer |
| Region Category | Domestic (China) |
| Model | ZW230II |
| Price Range | USD 2,800 – 7,000 |
| Temperature Control | Heating-Only (No Active Cooling) |
| Temperature Range | Ambient +5°C to 80°C |
| Temperature Stability | ±0.1°C (Typical at Setpoint) |
| External Dimensions | 420 × 280 × 166 mm (L × W × H) |
| Heating Power | 100 W |
| Column ID Compatibility | 2–10 mm |
| Max Column Length | 250 mm |
| Temperature Setting Resolution | 0.1°C |
| Display | Dual-Line LCD (Top: Actual Temp |
| Bottom | Setpoint) |
| Safety Features | Over-Temperature Alarm, Auto-Cut-Off Protection, Calibration Offset Adjustment |
| Optional Function | Pre-Heating Zone for Tubing |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Brand | Dongxi Analysis |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | EL-100 |
| Instrument Type | Evaporative Light Scattering Detector (ELSD) |
| Wavelength | 450 nm (blue LED) |
| Detection Method | Photomultiplier Tube (PMT) |
| Light Source | High-Stability Blue LED |
| Evaporation Zone Temperature Range | Ambient to 100 °C |
| Temperature Control Accuracy | ±1 °C |
| Solvent Flow Rate Compatibility | 10 µL/min – 3 mL/min |
| Nebulizing Gas Flow Rate | 300 mL/min – 1.5 L/min |
| Nebulizing Gas Pressure | 0.2–0.5 MPa |
| Detection Limit | <1 ng (glucose, direct injection) |
| Baseline Noise | <0.1 mV (at 1 mL/min mobile phase flow) |
| Dimensions (W×D×H) | 165 × 470 × 580 mm |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | EST |
| Instrument Type | Water & Soil VOC Analysis |
| Sample Tray Capacity | 84 positions |
| Injection Precision | RSD ≤ 10% |
| Trap Temperature Range | 180–300 °C |
| Purge Sample Heating Temperature | Ambient to 90 °C |
| Vial Cooling Temperature | 4–10 °C |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ALHS-20A PLUS |
| Instrument Type | Static Headspace Sampler |
| Automation Level | Fully Automatic |
| Vial Heating Range | Ambient to 200 °C (1 °C increment) |
| Valve Temperature Control Range | 40–220 °C (±1 °C accuracy) |
| Sample Loop Volume | 1 mL |
| Sample Capacity | 20 positions |
| Compatible Vial Sizes | 10 mL or 20 mL |
| Brand | EST |
|---|---|
| Origin | USA |
| Model | Centurion |
| Sample Positions | 100 |
| Injection Precision | RSD < 3% |
| Trap Tube Temperature Range | Ambient to 280 °C |
| Purge Sample Heating Temperature | Ambient to 120 °C |
| Sample Vial Cooling Temperature | 4–10 °C |
| Brand | EXFORMMA |
|---|---|
| Origin | Hong Kong |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic (PRC-manufactured) |
| Model | ARCUS 5 |
| Instrument Type | HPLC/UHPLC Autosampler |
| Sample Capacity | Up to 108 × 2 mL vials (configurable with 10 mL, 4 mL, or 96-well PCR plates) |
| Max Operating Pressure | 40 MPa |
| Injection Volume Range | 0.1–1000 µL (standard configuration: 0.1–120 µL) |
| Syringe Volume | 200 µL (resolution: 0.1 µL) |
| Sampling Modes | Full-loop, Partial-loop, and Needle-into-loop (NIL) / Zero-dead-volume sampling |
| Vial Height Limit | ≤52 mm (including septum and cap) |
| Pump Lifetime | ≥1,000,000 injections |
| Compliance | Designed for GLP/GMP environments |
| Brand | Fortelab |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | CP300 |
| Price Range | USD 1,400 – 7,000 (based on current exchange rate) |
| Instrument Type | Secondary Thermal Desorber, Thermal Desorption Unit |
| Brand | Frontier |
|---|---|
| Origin | Japan |
| Model | EGA/PY3030D |
| Pyrolyzer Type | Microfurnace-based Tubular Pyrolyzer |
| Temperature Range | 10 °C above ambient to 1050 °C (0.1 °C resolution) |
| Heating Rate | Programmable up to 600 °C/min (8-step temperature program) |
| Hold Time & Pyrolysis Time | 0.1–999.9 min (0.1 min step) |
| Cooling | Liquid nitrogen or liquid air |
| Interface Temperature Control (ITF) | 40–450 °C (1 °C step) |
| Reproducibility | RSD < 2% (GC-FID, certified per ASTM D7260 and ISO 17253) |
| Application Modes | EGA, TD, Single-shot Py, TD/PY Double-shot, Heart-cut Release Gas Analysis |
| Sample Introduction Options | Liquid injector, Dual-shot injector, Thermal Desorption (TD) module, Derivatization reactor, UV-assisted pyrolysis injector |
| Brand | Fuli |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | FL1092C |
| Instrument Type | Gas Chromatography Autosampler |
| Maximum Sample Capacity | 150 positions (with optional extended sample tray) |
| Optional Modules | Integrated internal standard addition, programmable heating/stirring, barcode scanning, full-tray temperature control (via recirculating water bath) |
| Brand | Fuli |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Gas Chromatography Autosampler |
| Model | FL1092T |
| Sample Capacity | 16 vials per tray |
| Configuration Options | Single-tower or dual-tower operation |
| Module Options | Vial agitation, temperature control (cooling/heating), barcode scanning |
| Compliance | Designed for integration with GC systems compliant with ISO/IEC 17025 laboratory practices and compatible with FDA 21 CFR Part 11–enabled data acquisition software |
| Brand | Fuli |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Dynamic Headspace Sampler |
| Automation Level | Fully Automated |
| Sample Tray Capacity | 24-position or 91-position |
| Heated Positions | 12 independent temperature-controlled vial positions |
| Sampling Modes | Static and Dynamic (with optional trap enrichment) |
| Electronic Pneumatic Control | Advanced AFC/EPC (Analog Flow Control / Electronic Pressure Control) |
| Equipped with Vial Agitation | Yes, programmable orbital shaking |
| Software Interface | Integrated intelligent workstation with method sequencing, audit trail, and GC trigger synchronization |
| Brand | Fulit |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | PT800 |
| Instrument Type | Multifunctional Autosampler |
| Flow Control Precision | ±0.001 psi (EPC) |
| Sample Capacity | 96-position water/soil dual-mode autosampler |
| Trapping System | High-efficiency U-shaped trap with integrated spiral water removal |
| Sample Preservation | Optional refrigerated sample tray (4–10 °C) |
| System Inertness | Fully passivated flow path (inertized valves, tubing, and fittings) |
| Cleaning Protocol | Hot water and methanol purge cycles |
| Stirring | Integrated magnetic stirring for soil matrix enhancement |
| Software Interface | Modular workstation with guided workflow buttons |
| Compliance Support | Audit-trail ready |
| Brand | Fulu |
|---|---|
| Origin | Russia |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | TDA |
| Instrument Type | Two-Stage Thermal Desorber / Thermal Desorption Unit |
| Sample Capacity | 50-position Auto-sampler |
| Sample Tube Format | US Standard Adsorption Tubes (89 mm × OD 6.4 mm) |
| Temperature Control Range | –20 °C to 450 °C |
| Cold Trap Heating Rate | Up to 3000 °C/min |
| Carrier Gas Control | Full Electronic Pressure Control (EPC) |
| System Liner | Fully Inert Flow Path |
| Peak Area Repeatability | RSD ≤ 2% |
| Operating Interface | Integrated Touchscreen Display |
| Functional Modes | Analysis, Tube Conditioning (Aging), Cold Trap Cleaning, Cold Trap Performance Test |
| Cooling Method | Thermoelectric (No Liquid Nitrogen Required) |
| Brand | GERSTEL |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | PYRO |
| Instrument Type | Filament-Based Pyrolyzer |
| Temperature Range | 10–1000 °C |
| Heating Technology | Four-Point Resistance Measurement on Platinum Filament |
| Sample Introduction | Valveless, Transfer-Line-Free Direct Coupling to GC/MS |
| Optional Cryogenic Trapping | Compatible with CIS (Cold Injection System) for Dual-Stage Thermal Desorption |
| Automation | Fully Integrated with MPS Robotic Sample Handling Platform |
| Compliance | Designed for GLP/GMP environments |
| Brand | Golden Promise |
|---|---|
| Model | AHS-6890 |
| Type | Semi-Automatic Headspace Sampler |
| Sample Capacity | 12-position vial carousel |
| Vial Size | Standard 20 mL (customizable: 5 mL, 10 mL, 50 mL) |
| Sample Zone Temp Range | Ambient to 200 °C (1 °C increments) |
| Transfer Line Temp Range | Ambient to 160 °C (1 °C increments) |
| Valve & Loop Temp Range | Ambient to 160 °C (1 °C increments) |
| Temperature Accuracy | ±0.5 °C |
| Temperature Uniformity | ±0.5 °C |
| Pressurization Range | 0–0.4 MPa (continuously adjustable) |
| Carryover Reduction | Programmable purge flow and duration |
| Reproducibility | RSD < 3% (dependent on GC system performance and operator technique) |
| Dimensions (W×D×H) | 200 × 380 × 400 mm |
| Weight | ~20 kg |
| Control Interface | Microprocessor-based with LCD display, membrane keypad, and embedded time-programmable logic (8-step sequence, 9 stored methods) |
| GC Synchronization | TTL-compatible event triggering |
| Safety | Low-voltage heating circuitry for transfer lines |
| Brand | Golden Promise |
|---|---|
| Model | OG-2000V |
| Origin | Shandong, China |
| Instrument Type | Rock Pyrolysis Analyzer for Geochemical Evaluation of Source Rocks |
| Compliance | Designed for ASTM D5307 / ISO 10374 / SY/T 5115-2014 |
| Detection Principle | Controlled-Temperature Pyrolysis coupled with Flame Ionization Detection (FID) and Thermal Conductivity Detection (TCD) |
| Sample Form | Crushed core or cuttings (dry, <1 mm particle size) |
| Temperature Range | Ambient to 650 °C (programmable ramp rates) |
| Data Interface | USB 2.0 (Windows-compatible, driver-free operation) |
| Measurement Output | S1 (free hydrocarbons), S2 (kerogen-derived hydrocarbons), S3 (CO₂ from organic carbon), Tmax (peak pyrolysis temperature), HI/OI (Hydrogen Index / Oxygen Index) |
| Accuracy | ±2% FS for S1/S2 |
| Power Supply | 220 VAC, 50 Hz, 1.5 kW |
| Brand | Golden Promise |
|---|---|
| Model | OG-2000V-A |
| Detector Type | Dual Flame Ionization Detector (FID) |
| Minimum Hydrocarbon Detection | 0.001 mg HC/g rock |
| Baseline Drift | < 0.1 mV / 30 min |
| Linear Dynamic Range | 10⁶ |
| FID Temperature Control Accuracy | 360 ± 0.5 °C |
| Pyrolysis Furnace Control Accuracy | 600 ± 0.5 °C |
| Oxidation Furnace Control Accuracy | 600 ± 0.5 °C |
| Programmable Temperature Ramp Profiles | 4 (Source Rock, Reservoir Rock, Thermal Simulation, User-Defined) |
| Ramp Linearity Deviation | < 0.5 °C/min |
| Total Analysis Time (Pyrolysis + Residual Carbon) | 14.5 min |
| Data Interface | USB 2.0 |
| Software Compatibility | Windows 98/2000/XP |
| Compliance | Designed for ASTM D7260, ISO 10303-21 (AP210) data exchange conventions, GLP-compliant audit trail support via software logging |
| Brand | GRACE |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MODcol® |
| Instrument Type | Static Axial Compression System |
| Design Principle | Spring-Actuated Constant-Pressure Bed Consolidation |
| Column Independence | Self-Contained (No External Hydraulic Source Required) |
| Fill Material Compatibility | ≥5 µm Particles (Silica, Polymer, Soft Gel) |
| Optional Configurations | Water-Jacketed Temperature Control, Prepacked (VYDAC®), or User-Packable with MODcol MULTIPACER® |
| Brand | Grace |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 25 and 50 |
| Instrument Type | Static Axial Compression System |
| Column ID Compatibility | 25 mm, 50 mm, 101 mm |
| Packing Mechanism | Spring-actuated static axial compression |
| Operational Pressure Range | Low-pressure (≤ 20 bar typical) |
| Packing Time | < 5 minutes per column |
| Fill Material Compatibility | Silica-based, polymer-based, and fragile non-silica stationary phases (e.g., agarose, cellulose, hybrid organic-inorganic) |
| Structural Frame | Precision-cast aluminum alloy |
| Brand | HAMILTON |
|---|---|
| Origin | USA |
| Model | 500 µL |
| Needle Type | Fixed-Needle, Standard |
| Volume Accuracy | ±1% (per ASTM D3747) |
| Needle Gauge | 22s |
| Hub Type | Luer Lock |
| Sterility | Non-sterile, Individually Packed |
| Compliance | ISO 8536-4, USP <381>, FDA 21 CFR Part 11 Ready (when used with compliant autosampler software) |
| Brand | HAMILTON |
|---|---|
| Origin | USA |
| Type | Gas-Tight Fixed-Needle Syringe |
| Volume | 250 µL |
| Application | Gas Chromatography (GC) Sample Introduction |
| Compliance | ASTM D4057, USP <621>, ISO/IEC 17025-aligned handling protocols |
| Needle | Stainless Steel, 23G × 2″ (0.64 mm × 50.8 mm), fixed |
| Barrel Material | Borosilicate glass with PTFE plunger seal |
| Accuracy | ±1% full scale (per ISO 8536-4) |
| Repeatability | CV < 0.5% (n = 10, standardized GC injection protocol) |
| Brand | Hanbon |
|---|---|
| Model | DAC HB |
| Type | Dynamic Axial Compression System |
| Column Internal Diameter Range | 50–2000 mm (customizable) |
| Origin | Jiangsu, China |
| Manufacturer | Hanbon Technology Co., Ltd. |
| Compliance | Designed for GLP/GMP-compliant preparative chromatography environments |
| Software Integration | Compatible with standard chromatography data systems (CDS) supporting ASTM E1384 and FDA 21 CFR Part 11 audit trail requirements |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | YHL-01B |
| Instrument Type | Dynamic Headspace Sampler |
| Automation Level | Semi-Automatic |
| Vial Heating Range | Ambient to 90 °C |
| Valve Temperature Control Range | Ambient to 90 °C |
| Loop Volume | 1 mL |
| Vial Positions | 2 |
| Vial Capacity | 10 mL |
| Temperature Accuracy | ±0.5 °C |
| Weight | <3 kg |
| Brand | Tianjin HengAo |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HT-230A |
| Temperature Control Range | Ambient +5°C to 80°C |
| Cooling | None (Heating-Only) |
| Control Accuracy | ±0.1°C |
| Heating Technology | TPC & Thin-Film Heater |
| Controller | Imported PID Digital Temperature Controller |
| Safety Features | Over-Temperature Alarm, Open-Circuit Protection |
| Mounting | Modular Side-Mount Design for HPLC Stacks |
| Orientation | Vertical or Horizontal Installation |
| Port Configuration | Inlet/Outlet Ports on Top, Bottom, Left, and Right |
| Brand | Hengxi Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | HS-951A |
| Instrument Type | Static Headspace Sampler |
| Automation Level | Fully Automated |
| Oven Temperature Range | Ambient to 260 °C |
| Valve Temperature Range | Ambient to 220 °C |
| Sample Transfer Line Temperature Range | Ambient to 220 °C |
| Temperature Control Accuracy | < ±0.1 °C |
| Temperature Uniformity | < ±0.1 °C |
| Sample Position Capacity | 12 vials |
| Vial Format | Standard 20 mL (10 mL optional) |
| Loop Volume | 1 mL |
| Pressurization Range | 0–0.4 MPa (continuously adjustable) |
| Pressure Monitoring Range | 0–0.4 MPa (digital gauge) |
| RSD for Repeatability | < 1.5% (200 ppm ethanol in water, GC-dependent) |
| Power Supply | AC 220 V, 50 Hz |
| Power Consumption | 450 W |
| Dimensions (W×D×H) | 505 × 295 × 535 mm |
| Weight | ~32 kg |
| Brand | HMC |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PHRED |
| Price Range | USD 1,400–2,800 (FOB) |
| Operating Temperature | Ambient |
| Derivatization Flow Rate | 0.3 mL/min |
| Reaction Capillary ID | 0.25 mm |
| Dimensions (L×W×H) | 330 × 50 × 70 mm |
| Power Supply | 220 V / 50 Hz |
| Power Consumption | 8 W |
| Capillary Material | PTFE |
| Maximum Pressure Rating | 500 psi (35 bar) |
| Weight | ~4 kg |
| Regulatory Compliance | AOAC 2005.08, AOAC 2008.02, AOAC Aa 11-05, Taiwan Food Agency Notice No. 0981800370, Ph. Eur. 2.8.18, GB/T 18979–2003, SN/T 1109–2002 |
| Brand | HPG (Huaputongyong) |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Resistive-Filament Pyrolyzer |
| Model | HP2000-GC |
| Price Range | USD 42,000 – 70,000 |
| Compliance | IEC 62321-8:2017 |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | HS-2 |
| Pricing | Upon Request |
| Instrument Type | Static Headspace Sampler |
| Sample Heating Range | 40–200 °C (±1 °C accuracy) |
| Valve Heating Range | 40–200 °C (±1 °C) |
| Transfer Line Heating Range | 40–200 °C (±1 °C) |
| Sampling Time | 0–20 min |
| Pressurization Time | 0–30 s |
| Loop Volume | 1 mL |
| Vial Capacity | 10 mL or 20 mL vials |
| Sample Position Capacity | 10 positions |
| RSD | ≤1.5% (measured in 200 ppm ethanol in water) |
| Power Consumption | 220 W |
| Dimensions (W×H×D) | 500×180×400 mm |
| Net Weight | ~15 kg |
| Brand | HSPX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | HS-6D |
| Pricing | Available Upon Request |
| Flow Control | Mass Flow Controllers (MFCs) |
| Display | 7-inch Capacitive Touchscreen |
| Gas Path Materials | Passivated Stainless Steel Tubing & PTFE Tubing |
| Built-in Pump | Diaphragm Pump for Ambient-Pressure Gas Sampling |
| Dilution Range | 1:1 to 1:100 (customizable) |
| Output Channels | 6 Independent Concentration Ports |
| Operation Modes | Single-point or Multi-step Sequential Dilution |
| Method Storage | Onboard Method Library with Recall Function |
| Software Interface | Single- or Multi-channel Configuration Support |
| Brand | HSPX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HTB-3420 |
| Temperature Control Range | Ambient to 400 °C |
| Tube Capacity | 1–20 tubes |
| Temperature Setting Increment | 1 °C |
| Temperature Accuracy | ±0.5% of setpoint |
| Temperature Uniformity | ±1 °C across chamber |
| Timer Range | 0–99 h 99 min, continuously adjustable |
| Tube Compatibility | Outer diameter 6 mm (¼ inch), unlimited length |