Common Laboratory Equipment
Filter
Showing 6841–6870 of 18046 results
| Brand | HUANKONG |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GHD-AWM |
| Pricing | Available Upon Request |
| Temperature Control | ±0.5 °C uniformity |
| Humidity Control | 40–60% RH, ±3% RH uniformity |
| Cleanroom Class | ISO 14644-1 Class 5 (equivalent to Federal Standard 209E Class 100) |
| Vibration Isolation | Active pneumatic damping system |
| Weighing Capacity | Up to 220 g |
| Readability | 0.1 µg (10⁻⁷ g) |
| Sample Throughput | 120 × 47 mm filters |
| Electrostatic Neutralization | Bipolar ionizer (±1 kV adjustable output) |
| Data Capture | QR code, barcode & RFID reader integrated |
| Environmental Monitoring | Real-time logging of temperature, humidity, and laminar airflow velocity (0.3–0.5 m/s) with automated report generation |
| Filter Compatibility | Glass fiber, quartz, PTFE, cellulose ester, and mixed ester membranes |
| Sample Types | Solid particulates (PM₂.₅, PM₁₀), powders, lyophilized residues, solvent-free extracts, and non-volatile liquid residues |
| Brand | HUANKONG |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | GHD-CL10 |
| Pricing | Upon Request |
| Filter Membrane Diameter | 47 mm |
| Compatible Membrane Materials | Polypropylene, PTFE, Quartz |
| Maximum Simultaneous Samples | 15 |
| Sample Volume per Filtration | 250 mL |
| Integrated Rinse Function | Yes |
| Automatic Backflush Capability | Yes |
| Filtration Workflow | Fully Automated (no manual tubing connection or filter flask cleaning required) |
| Brand | HUANKONG |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GHD-LM |
| Pricing | Upon Request |
| Temperature Maintenance | ≥72 h at ≤4 °C |
| Capacity | 32 filter holders |
| Weight & Dimensions | Airline-compliant (carry-on compatible) |
| Data Logging | Real-time temperature curve + GPS trajectory via QR-coded traceability |
| Tilt Detection | Integrated accelerometer-based orientation monitoring |
| Insulation | Multilayer vacuum-enhanced inner liner with high-reflectivity cold-retention coating |
| Cold Source | Phase-change material (PCM)-based long-duration refrigerant |
| Brand | HUANKONG |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GHD-QG10 |
| Pricing | Upon Request |
| Compatible Gas Bag Volumes | 200 mL, 300 mL |
| Vacuum Pressure Range | −40 kPa to 0 kPa |
| Vacuum Control Accuracy | < ±0.5 kPa |
| Compatible Summa Canisters | 3 L, 6 L, 15 L |
| Maximum Transfer Volume (from 3 L canister) | >1000 mL |
| Brand | HUANKONG |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Magnetic Hotplate Stirrer |
| Heating Plate Material | Ceramic |
| Control Interface | Capacitive Touchscreen (iPad-style) |
| Independent Stations | 4–8 |
| Individual Station Control | Temperature, Speed, Timer |
| Heating Method | Resistive Ceramic Plate with Integrated Thermocouple |
| Stirring Principle | Permanent Magnet Coupling via Motor-Driven Rotating Magnet Array |
| Enclosure | Reinforced Powder-Coated Steel Chassis |
| Operating Orientation | Ergonomic Tilted Front Panel |
| Safety Features | Overheat Protection, Motor Stall Detection, No-Spark Operation |
| Display | High-Contrast Digital LCD with Real-Time Parameter Feedback |
| SOP Functionality | Programmable Sequence Storage (Up to 99 Protocols) |
| Noise Level | <45 dB(A) at 1 m |
| Compliance | Designed per IEC 61010-1:2010 for Laboratory Electrical Equipment |
| Brand | HUANKONG |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GHK-1400B |
| Instrument Category | Other Vacuum Pumps |
| Product Type | Oil-Lubricated Rotary Vane Pump |
| Maximum Vacuum Level | > −96 kPa (absolute) |
| Flow Rate | 10 L/min (at atmospheric inlet) |
| External Dimensions | 130 × 100 × 220 mm |
| Weight | 2.3 kg |
| Power Source | Integrated Rechargeable Battery (Li-ion, nominal 12 V) |
| Brand | HUANKONG |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HK |
| Pricing | Available Upon Request |
| Hydrogen Generation Principle | Proton Exchange Membrane (PEM) Electrolysis of Deionized Water |
| Output Flow Rate | 0–100 mL/min |
| Hydrogen Purity | ≥99.999% |
| Power Consumption | 30 W |
| Brand | HUANKONG |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | 1800 |
| Pricing | Upon Request |
| Brand | HUANKONG |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | PF-300 |
| Hydrogen Production Principle | Proton Exchange Membrane (PEM) Electrolysis of Deionized Water |
| Hydrogen Purity | ≥99.999% |
| Output Pressure | Up to 3 MPa |
| Flow Rate | Customizable |
| Power Consumption | ~100 W (typical at rated output) |
| Construction Materials | Titanium and 316L stainless steel pressure components |
| Safety Features | Automatic pressure cutoff, high-integrity metal-seal fittings (rated to 3 MPa), integrated high-pressure gas–liquid separator |
| Certifications | Compliant with GB/T 37562–2019 (Chinese standard for PEM hydrogen generators), designed per ISO 22734-1 for electrolytic hydrogen generation systems |
| Brand | HUANKONG |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | PF-300 |
| Hydrogen Generation Principle | Pure Water Electrolysis via Proton Exchange Membrane (PEM) |
| Output Flow Rate | 0–100 mL/min |
| Hydrogen Purity | ≥99.999% |
| Maximum Output Pressure | 3 MPa |
| Construction Materials | Titanium & 316L Stainless Steel Pressure Components |
| Power Supply | DC Input (Voltage/Current Specifications Configurable per Mobile Power Unit) |
| Gas Separation | Integrated PEM-based H₂/O₂ Membrane Separation |
| Safety Features | Auto-pressure Cutoff, High-Integrity Swagelok®-Type Fittings, Overpressure Relief Valve |
| Moisture Management | High-Pressure Gas-Liquid Separator (No Desiccant or Maintenance Required) |
| Brand | HuaSheng PuXin (HSPX) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HS-300 / HS-500 |
| Hydrogen Generation Principle | Pure Water Electrolysis (KOH Aqueous Solution) |
| Output Flow Rate | 0–310 mL/min (HS-300), 0–510 mL/min (HS-500) |
| Output Pressure | 0.4 MPa |
| Hydrogen Purity | >99.999% |
| Power Consumption | 150 W (HS-300), 250–300 W (HS-500) |
| Water Reservoir Volume | 0.92 L |
| Required Feed Water | Distilled Water |
| Weight | <10 kg (HS-300), <11 kg (HS-500) |
| Origin | Zhejiang, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | HS-3345 |
| Price Range | USD 7,000–14,000 (FOB) |
| Max Specimen Size (with C-clamp) | 55 mm × 40 mm |
| Section Thickness Range | 0.5 µm to 100 µm (adjustable in 0.5 µm increments ≤5 µm |
| Trim Thickness Range | 1 µm to 600 µm |
| Specimen Retraction | 0–95 µm (5 µm increments) |
| Specimen Horizontal Stroke | 25 mm |
| Specimen Vertical Stroke | 60 mm |
| Blade Travel Adjustment | Horizontal 3-zone positioning |
| Specimen Orientation | ±8° X/Y tilt adjustment |
| Display Language | English & Chinese |
| Safety | Dual handwheel locks, emergency stop button, forward/reverse limit alarm, self-diagnostic system |
| Brand | Huayan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | Custom-Engineered |
| Pricing | Available Upon Request |
| Waveguide Standards | BJ26/WR340, BJ22/WR430, BJ32/WR284, BJ9/WR975 |
| Flange Standards | FDP26, FDP22 (×2), FDP9 |
| Construction Materials | Anodized Aluminum or Oxygen-Free Copper |
| Operating Frequencies | 915 MHz and 2450 MHz |
| Power Handling Capacity | 900 W – 20 kW (continuous wave, CW) |
| Magnetron Compatibility | Universal fit for industrial and scientific magnetrons per IEC 60705 and MIL-STD-461E RF interface specifications |
| Brand | Huayan |
|---|---|
| Origin | Jiangsu, China |
| Model | ML08S-3 |
| Temperature Range | 0–300 °C |
| Pressure Rating | Atmospheric (open-vessel operation) |
| Microwave Power Output | 0–1000 W (non-pulsed continuous & variable-pulse dual mode) |
| Microwave Frequency | 2.45 GHz ±50 MHz |
| Stirring | Integrated magnetic stirring + optional top-mounted mechanical stirring |
| Reaction Cavity Volume | 23 L |
| Temperature Sensor | Pt100 contact probe, accuracy ±1 °C |
| Safety | Microwave choke-sealed top ports, interlocked door, magnetron thermal protection |
| Compliance | Meets GB 4706.21 / GB 10436 (Chinese national standards for microwave leakage <5 mW/cm²) |
| Brand | Huayan |
|---|---|
| Origin | Jiangsu, China |
| Model | MY1500S / MY800S |
| Output Power | 0–1500 W (MY1500S) / 0–800 W (MY800S), continuously adjustable |
| Frequency | 2450 MHz ±50 MHz |
| Waveguide Interface | Standard BJ-26 or BJ-22 |
| Input Voltage | 220 V AC, 50 Hz |
| Cooling | Forced-air or water-cooled (configurable) |
| Safety Compliance | Meets GB 4706.21 & GB 10683 (Chinese National Standards for Microwave Leakage ≤5 mW/cm² at 5 cm) |
| Brand | Beijing Huayisanpu |
|---|---|
| Origin | Beijing, China |
| Model | 320B / 520B |
| Output Flow Rate | 0–300 mL/min (320B) / 0–500 mL/min (520B) |
| Output Pressure | 0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 150 W (320B) / 180 W (520B) |
| Dimensions (L×W×H) | 370 × 220 × 360 mm |
| Input Voltage | 220 V ±10%, 50 Hz |
| Water Requirement | Deionized or Distilled Water |
| Cooling Method | Semiconductor-based Cooling |
| Moisture Removal | Stacked Tubular Condensation System |
| Maintenance Mode | Auto-refill, Non-backflow Electrolyte Design |
| Compliance | Designed for ISO/IEC 17025-compliant lab environments |
| Brand | Huayisanpu |
|---|---|
| Origin | Beijing, China |
| Model | PGA-2LB / PGA-5LB |
| Output Flow | 0–2 L/min (PGA-2LB) / 0–5 L/min (PGA-5LB) |
| Output Pressure | 0.4 MPa |
| Power Consumption | 145 W / 175 W |
| Noise Level | ≤42 dB(A) |
| Dimensions (L×W×H) | 500 × 260 × 380 mm |
| Weight | ~25 kg / ~28 kg |
| Air Purity | Oil-free, Triple-stage Purification |
| Cooling | Semiconductor-based Cold-drying System |
| Safety Features | Overpressure Protection, Thermal Cut-off, Low-pressure Soft-start, Automatic Drain Valve |
| Brand | Beijing Huayisanpu |
|---|---|
| Origin | Beijing, China |
| Model | PGH-500 Hydrogen Generator |
| Hydrogen Generation Principle | Pure Water Electrolysis |
| Output Flow Rate | 0–500 mL/min |
| Output Pressure | 0.4 MPa |
| Hydrogen Purity | ≥99.999% |
| Power Consumption | 150 W |
| Input Voltage | 220 V ±10%, 50 Hz |
| Operating Temperature | 0–40 °C |
| Relative Humidity | <85% |
| Dimensions (L×W×H) | 370 × 180 × 360 mm |
| Weight | ~12 kg |
| Brand | Huayisanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Equipment Type | Nitrogen Generator |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) with Carbon Molecular Sieve (CMS) |
| Output Flow Rate | 0–16 L/min |
| Output Pressure | 0.1–0.4 MPa (adjustable), Max Burst Pressure >1.0 MPa |
| Nitrogen Purity | 99.0–99.99% (user-adjustable) |
| Dew Point | –40 °C to +5 °C (typical post-dryer output) |
| Power Supply | 220 V ±10%, 50 Hz |
| Rated Power | 900 W |
| Noise Level | <55 dB(A) |
| Dimensions (W×D×H) | 620 × 510 × 820 mm |
| Weight | 105 kg |
| Operating Ambient Temperature | 5–45 °C |
| Compliance | CE-marked design principles |
| compatible with ISO 8573-1 | 2010 Class 2 compressed air feed requirements |
| Brand | Huayisanpu |
|---|---|
| Origin | Beijing, China |
| Model | PGN-300 |
| Nitrogen Generation Principle | Electrolytic Membrane Separation |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0.4 MPa |
| Nitrogen Purity | 99.999% |
| Dew Point | −10 to −40 °C |
| Input Air Pressure | 0.5 MPa |
| Power Supply | 220 V AC, 50 Hz |
| Max. Power Consumption | 80 W |
| Dimensions (L×W×H) | 385 × 180 × 360 mm |
| Net Weight | ~14 kg |
| Operating Ambient | 10–40 °C, RH < 85%, non-corrosive, low-dust environment |
| Brand | Huayisanpu (Beijing Huayisanpu Instrument Co., Ltd.) |
|---|---|
| Origin | Beijing, China |
| Model | PGN-30L |
| Output Flow | 30 L/min |
| Output Pressure Range | 0.1–0.4 MPa |
| Nitrogen Purity | 99–99.9% |
| Dew Point | < −60 °C |
| Feed Gas | Oil-free Compressed Air |
| Power Supply | 220 V AC ±10%, 50 Hz, 1100 W |
| Dimensions | 600 × 700 × 1100 mm |
| Weight | 120 kg |
| Compliance | Designed for GLP-compliant lab environments |
| compatible with ISO 8573-1 Class 2 | 2:2 compressed air input |
| Brand | Beijing Huayisanpu |
|---|---|
| Origin | Beijing, China |
| Model | PGN-30LB High-Pressure Nitrogen Generator |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 0–30 L/min |
| Output Pressure | 110 psi (0.76 MPa) |
| Nitrogen Purity | 95%–99.9% |
| Dew Point | ≤ −45 °C |
| Particulate Filtration | < 0.01 µm |
| Total Power Consumption | 1100 W |
| Noise Level | ≤ 60 dB(A) |
| Dimensions (L×W×H) | 800 × 500 × 700 mm |
| Weight | 120 kg |
| Operating Ambient | 220 V ±10%, 50 Hz |
| Relative Humidity | ≤ 80% |
| Ambient Temperature | ≤ 45 °C |
| Brand | Beijing Huayisanpu |
|---|---|
| Origin | Beijing, China |
| Model | PGT-300/500 Integrated N₂–H₂–Air Generator |
| Nitrogen Purity | 99.994% (O₂ ≤ 60 ppm) |
| Hydrogen Purity | 99.999% (O₂ + H₂O ≤ 1 ppm) |
| Air Purity | Oil-free, Class 3 per ISO 8573-1 |
| Nitrogen Flow Rate | 0–300 mL/min (PGT-300) / 0–500 mL/min (PGT-500) |
| Hydrogen Flow Rate | 0–300 mL/min (PGT-300) / 0–500 mL/min (PGT-500) |
| Air Flow Rate | 0–2 L/min (PGT-300) / 0–5 L/min (PGT-500) |
| Output Pressure | 0.4 MPa (adjustable, stability ≤ ±0.01 MPa) |
| Power Supply | AC 220 V, 50 Hz |
| Max. Power Consumption | 350 W (PGT-300) / 450 W (PGT-500) |
| Dimensions (L×W×H) | 505 × 400 × 460 mm |
| Weight | 40 kg (PGT-300) / 42 kg (PGT-500) |
| Operating Environment | 0–45 °C, RH < 85%, non-corrosive, low-dust |
| Water Requirement | Deionized or distilled water only |
| Design | Integrated monolithic chassis with independent gas modules and shared control logic |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | BFT® |
| Temperature Range | –5 to 80 °C (typical operational range for beer aging: 0–60 °C) |
| Bath Opening Dimensions (W×D) | 350 × 410 mm |
| Bath Depth | 270 mm |
| Heating Power | 2.0 kW |
| Cooling Capacity at 20 °C | 1.2 kW |
| Overall Dimensions (W×D×H) | 460 × 710 × 911 mm |
| Construction | Full stainless steel (AISI 316L wetted parts) |
| Controller | Pilot ONE with 7″ color touchscreen, graph-based real-time temperature profiling, 11-language UI, programmable calendar/time/date scheduler, overtemperature & low-level safety cutoffs |
| Safety Class | DIN 12876-1 Class III / FL (suitable for flammable liquids) |
| Pump System | High-pressure circulation pump + absorption chiller circuit |
| Interfaces | RS232, integrated Pt100 Class A sensor (±0.1 °C accuracy) |
| Cooling Type | Available in water-cooled and air-cooled configurations |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | CC-K6, CC-K6s, KISS K6, KISS K6s |
| Temperature Range | –25 °C to +200 °C |
| Heating Power | 1.6–2.1 kW |
| Cooling Power (at 20 °C) | 0.72 kW (CC-K6), 0.25 kW (KISS K6), 0.40 kW (CC-K6s), 0.26 kW (KISS K6s) |
| Bath Volume | 4.5 L |
| Bath Opening Dimensions | 140 × 120 mm |
| Bath Depth | 150 mm |
| Pump Flow Rate (Pressure/Suction) | up to 27 L/min @ 0.4 bar / 22 L/min @ 0.15 bar (CC-K6) |
| External Circulation Interface | Yes |
| Temperature Stability | ±0.02 K (CC series), ±0.05 K (KISS series) |
| Refrigerant | Natural (R744 / CO₂ or R290 / propane, per model configuration) |
| Safety Class | DIN 12876 Class III / FL (flammable liquid compatible) |
| Controller | Pilot ONE with 7″ capacitive touchscreen, 11-language UI, RS232 interface, Pt100 sensor input, 2-point calibration, calendar-based scheduling, overtemperature & low-level protection |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model Range | CC-208B, CC-212B, CC-215B, CC-220B, CC-225B, KISS 208B, KISS 212B, KISS 215B, KISS 220B, KISS 225B |
| Temperature Range | −30 °C to +200 °C |
| Heating Power | 1.5–2.1 kW |
| Bath Volume | 7.5–23.5 L |
| Bath Depth | 150–200 mm |
| Opening Dimensions (W×D) | 230×127 mm to 290×329 mm |
| Temperature Stability | ±0.02 K (CC series), ±0.05 K (KISS series) |
| Pressure Pump Flow Rate | 27 L/min @ 0.72 bar (CC), 14 L/min @ 0.25 bar (KISS) |
| Suction Pump Flow Rate | 10.5 L/min @ 0.7 bar (CC & KISS) |
| External Dimensions (W×D×H) | 290×350×375 mm to 350×555×425 mm |
| Construction | AISI 304 stainless steel bath tank |
| Cooling Requirement | External chiller required for operation below ambient or at sustained low temperatures |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | CC-K Series |
| Temperature Range | -20 °C to +200 °C |
| Heating Power | 1.8–2.1 kW |
| Refrigeration Power | 0.12–0.35 kW (at specified setpoints) |
| Bath Volume | 10.5–23.5 L |
| Bath Opening Dimensions | 290 × 152 mm or 290 × 329 mm |
| External Pump Interface | Yes |
| Pressure Pump Flow Rate | 0.4–0.72 L/min @ 2–3.5 bar |
| Suction Pump Flow Rate | 0.12–0.27 L/min @ 0.16–0.2 bar |
| Overall Dimensions (W×D×H) | 350 × 555/560 × 430/615 mm |
| Construction | Full stainless-steel bath vessel |
| Safety Rating | DIN 12876 Class III / FL (flammable liquid compatible) |
| Controller | Pilot ONE touchscreen (7″), 11-language UI, RS232 interface, Pt100 sensor input, 2-point calibration, calendar-based scheduling, overtemperature & low-level protection |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | DC® |
| Temperature Range | –30 °C to +50 °C |
| Refrigeration Capacity | 2.0–4.7 kW (at –20 °C) |
| Dimensions (W×D×H) | 190×250×360 mm (DC30) / 250×310×415 mm (DC31) / 280×340×465 mm (DC32) |
| Refrigerant | R-410A |
| Power Supply | 230 V, 50/60 Hz |
| IP Rating | IP20 |
| Weight | 22–48 kg (model-dependent) |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Manufacturer | Huber Kältemaschinenbau GmbH |
| Model | 1041.0001.01 |
| Temperature Range | −40 °C to +200 °C |
| Temperature Stability | ±0.01 °C |
| Display Resolution | 0.01 °C |
| Heating Power | 1.5 kW |
| Cooling Power (at specified setpoints) | 0.6 kW (−20 °C), 0.35 kW (−40 °C) |
| Refrigerant | R290 (0.1 kg) |
| Pump Flow Rate | up to 47 L/min at 0.9 bar |
| Max. Allowable Fluid Viscosity | 50 mm²/s |
| Interface Ports | 2×USB (Host/Device), Ethernet, RS232 |
| Controller | Pilot ONE E-grade “Professional” with 5.7″ capacitive touchscreen |
| Safety Class | III / FL |
| Protection Rating | IP20 |
| Dimensions (W×D×H) | 295 × 530 × 570 mm |
| Weight | 55 kg |
| Ambient Operating Temperature | 5–40 °C |
| Sound Pressure Level | 61 dB(A) |
| Minimum Fill Volume | 1.5 L |
| Expansion Tank Capacity | 3 L |
| Power Supply | 230 V AC, 1~ 50 Hz, max. 9.5 A |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | Minichillers® |
| Temperature Range | −5 °C to +40 °C (up to +80 °C return fluid temperature) |
| Refrigeration Capacity | 0.25–1.2 kW @ specified setpoints |
| Pump Flow Rate | 10–18 L/min |
| Max. Pressure | 0.3–0.9 bar |
| Dimensions (W×D×H) | 225×360×380 mm to 280×511×424 mm |
| Construction | Stainless steel housing |
| Refrigerant | Natural R744 (CO₂) or R290 (propane), per model |
| Optional | Integrated 1 kW heater (extends range to +100 °C) |
| Interfaces | RS232, USB |
| Display | OLED touchscreen (OLÉ controller) |
| Compliance | CE, RoHS, EN 61000-6-3/6-4, EN 61000-3-2/3-3 |