Common Laboratory Equipment
Filter
Showing 6991–7020 of 18046 results
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | HLH-1L |
| Pricing | Available Upon Request |
| Hydrogen Purity | >99.999% |
| Flow Rate | 0–1 L/min |
| Output Pressure | 0–0.4 MPa (Factory Set at 0.3 MPa) |
| Max Power Consumption | 400 W |
| Operating Environment | 10–40 °C, Relative Humidity ≤85%, Non-corrosive, Low-dust Ambient |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | HLH-700II |
| Pricing | Available Upon Request |
| Hydrogen Purity | >99.999% |
| Flow Rate | 0–700 mL/min |
| Output Pressure | 0–0.4 MPa (Factory Set at 0.3 MPa) |
| Max Power Consumption | 250 W |
| Operating Environment | 10–40 °C, RH ≤85%, Non-corrosive, Low-dust Ambient |
| Brand | Zhonghui Pu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TH-3000PSA |
| Hydrogen Generation Principle | Pure Water Electrolysis |
| Output Flow Rate | 0–3000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 2800 W |
| Operating Temperature | 1–40 °C |
| Relative Humidity | ≤85% RH |
| Input Voltage | 220 V ±10% |
| Dimensions (W×D×H) | 680 × 680 × 900 mm (height excludes casters) |
| Net Weight | ~105 kg |
| Certifications | CE-compliant |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TH-6000PSA |
| Hydrogen Generation Principle | Pure Water Electrolysis |
| Output Flow Rate | 0–6000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 3600 W |
| Operating Temperature | 1–40 °C |
| Relative Humidity | ≤85% RH |
| Input Voltage | 220 V ±10% |
| Dimensions (L×W×H) | 1200 × 750 × 900 mm (height excludes casters) |
| Net Weight | ~150 kg |
| Hydrogen purity | 99.999% |
|---|---|
| Hydrogen flow rate | 0–300 mL/min |
| Hydrogen output pressure | 0.4 MPa |
| Air flow rate | 0–2000 mL/min |
| Air output pressure | 0.4 MPa |
| Power consumption | 275 W |
| Dimensions (W×D×H) | 470 × 260 × 380 mm |
| Net weight | ~28 kg |
| Brand | Hailong |
|---|---|
| Origin | Shanghai, China |
| Model | HLHA-500II |
| Hydrogen Purity | 99.999% |
| Hydrogen Flow Rate | 0–500 mL/min |
| Hydrogen Output Pressure | 0–0.4 MPa (factory-set at 0.3 MPa) |
| Air Flow Rate | 0–5000 mL/min |
| Air Output Pressure | 0–0.5 MPa |
| Air Hydrocarbon Content (Output) | <0.1 ppm |
| Max Input Air Hydrocarbon Content | <100 ppm |
| Pressure Stability (H₂) | <0.0001 MPa |
| Max Power Consumption | 350 W |
| Operating Temperature | 0–40 °C |
| Operating Humidity | <85% RH |
| Electrolyte Type | Aqueous KOH |
| Compressor | Domestic Diaphragm-Type |
| Warranty | 1-year system warranty, 3-year electrolyzer warranty |
| Brand | Hailong |
|---|---|
| Origin | Shanghai, China |
| Model | HLHA-300G |
| Hydrogen Purity | 99.999% |
| H₂ Flow Rate | 0–300 mL/min |
| H₂ Output Pressure | 0–0.4 MPa (factory-set at 0.3 MPa) |
| Air Flow Rate | 0–2000 mL/min |
| Air Output Pressure | 0–0.5 MPa |
| Air Hydrocarbon Content (output) | <0.1 ppm |
| Max. Input Air Hydrocarbon Content | <100 ppm |
| Pressure Stability Accuracy | <0.0001 MPa |
| Max. Power Consumption | 300 W |
| Operating Temperature | 0–40 °C |
| Operating Humidity | <85% RH |
| Warranty | 1-year full unit, 3-year electrolyzer |
| Brand | Zhuochi |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | General Distributor |
| Product Origin | Domestic |
| Model | SK3-2.5-10X |
| Instrument Type | Tube Furnace |
| Max Temperature | 1000 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 2.5 kW |
| Heating Rate (to Max Temp) | ≤50 °C/min |
| Heating Method | Resistance Wire Heating |
| Internal Chamber Dimensions | φ80 mm × 380 mm |
| Controller Size | 80 mm × 610 mm |
| Brand | Hyeyan |
|---|---|
| Origin | Jiangsu, China |
| Model | MG08S-3 |
| Microwave Power | 0–800 W (continuously adjustable) |
| Frequency | 2450 MHz ±50 MHz |
| Aperture Diameter | 28–40 mm |
| Timer Range | 0–900 min |
| Temperature Monitoring | High-precision RTD sensor |
| Cavity Material | Stainless steel |
| Safety Features | Magnetron thermal protection, interlocked door switch, microwave leakage < GB 10436-2008 limit |
| Brand | Hyeyan |
|---|---|
| Model | MY200S |
| Output Type | LY16 Coaxial or BJ26 Waveguide |
| Max. Output Power | 200 W (linearly adjustable) |
| Operating Frequency | 2450 ± 50 MHz |
| Input Voltage | AC 220 V ± 10%, 50 Hz |
| Input Apparent Power | < 500 VA |
| Anode Current | Continuously Adjustable with Overload Protection |
| Housing | Full Aluminum with Powder-Coated Finish |
| Safety | Multi-Level Interlock Protection, Overcurrent Protection, Real-Time Control Logic |
| Compliance | Designed for integration into CE-compliant microwave synthesis platforms per IEC 61000-6-3/6-4 and EN 61010-1 |
| Brand | Hyeyan |
|---|---|
| Model | MZYD10S |
| Output Power | 0–10 kW (adjustable in discrete steps) |
| Input Voltage | AC 380 V ±10% |
| Operating Frequency | 2450 MHz ±50 MHz |
| Apparent Input Power | ≤18 kVA |
| Cavity Dimensions (L×W×H) | 600 mm × 600 mm × 1000 mm |
| Control System | Industrial PLC with HMI touchscreen interface |
| Cooling | Forced-air cooling with magnetron temperature monitoring and fault alarm |
| Mobility | Integrated heavy-duty casters |
| Compliance | Designed for laboratory-scale process development and pilot-scale microwave-assisted synthesis, extraction, and thermal treatment applications |
| Brand | Hyeyan |
|---|---|
| Model | ZDM-1000 |
| Microwave Power | 0–1000 W (continuously adjustable, linear control) |
| Frequency | 2450 MHz ± 50 MHz |
| Input Power | 220 V, 50 Hz |
| Temperature Monitoring Range | 0–500 °C |
| Temp. Control Accuracy | ±1 °C |
| Waveguide Interface | Standard WR-340 (or equivalent) |
| Safety Compliance | Meets GB 10436–2008 (China National Standard for Microwave Leakage Limits) |
| Control Interface | Industrial-grade color touchscreen HMI (Chinese-language UI) |
| Cooling | Forced-air magnetron cooling with thermal interlock |
| Protection Features | Circulator-based isolation, full-reflection tolerance, IR-based real-time temperature feedback, multi-level hardware safety interlocks |
| Brand | Hyeyan |
|---|---|
| Origin | Jiangsu, China |
| Model | ZDM-2B |
| Microwave Frequency | 2450 MHz ± 50 MHz |
| Output Power Range | 0–1500 W (continuous linearly adjustable) |
| Power Control Modes | Continuous mode & programmable pulsed mode |
| Pulse Period & Pulse Width | User-definable via touchscreen interface |
| Temperature Monitoring Range | 0–500 °C |
| Temperature Accuracy | ±1 °C |
| Input Power | 220 V, 50 Hz |
| Waveguide Output | Standard WR-340 |
| Safety Compliance | Meets GB 10436-2008 (China National Standard for Microwave Leakage) |
| Cooling Interface | Reflux port with microwave suppression on multi-mode cavity |
| Stirring Options | Built-in magnetic stirrer (multi-mode cavity) + optional mechanical stirring |
| Tuning System | Terminal tuning & focal point adjustment for single-mode cavity |
| Real-time Diagnostics | Integrated waveguide coupler, crystal detector, and tuner for standing-wave observation and impedance matching |
| Optional Connectivity | RS-485 interface for PC-based control and third-party software integration |
| Brand | Hyoyan |
|---|---|
| Origin | Jiangsu, China |
| Model | MC8S-1 |
| Microwave Power | 0–1000 W (continuous, linearly adjustable) |
| Microwave Frequency | 2450 MHz ±50 MHz |
| Ultrasonic Power | 50 W |
| Ultrasonic Frequency | 40 kHz |
| Temperature Range | 0–300 °C (±1 °C accuracy) |
| Reaction Volume | 10–500 mL |
| Cavity Material | Stainless steel |
| Safety Compliance | Microwave leakage < national safety limit (GB 10436 / IEC 61000-3-2) |
| Interface | Full-color TFT LCD touchscreen, RS-485 optional (Modbus RTU), video output (composite analog) |
| Brand | Hyway |
|---|---|
| Model | MG08S-2B |
| Origin | Jiangsu, China |
| Microwave Power | 0–900 W (continuous linear adjustment) |
| Frequency | 2450 MHz ±50 MHz |
| Temperature Range | 0–300 °C (±1 °C accuracy) |
| Temperature Sensor | Shielded Pt100 contact probe |
| Timer Range | 0–900 min |
| Cavity Volume | 23 L |
| Reaction Vessel Capacity | 10–1000 mL |
| Stirring | Dual-mode (built-in magnetic + external mechanical, both continuously adjustable) |
| Safety Features | Microwave leakage < GB 10436-2008 limit, interlocked door switch, magnetron overtemperature protection, waveguide-mounted microwave suppressors |
| Inlet/Outlet Ports | Two rear-mounted, wave-suppressed ports for gas/liquid feed or inert atmosphere purging |
| Reflux Interface | Top-mounted standard taper port with integrated microwave suppression |
| Brand | Hywell |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MC8S-1A |
| Price Range | USD 1,400–7,200 (FOB) |
| Microwave Power | 0–1000 W (continuous, linearly adjustable) |
| Microwave Frequency | 2.45 GHz ± 0.05 GHz |
| Temperature Control Range | 0–300 °C |
| Temperature Control Accuracy | ±1 °C |
| Cavity Material | 304 Stainless Steel |
| Ultrasonic Power | 0–900 W (continuous, adjustable) |
| Ultrasonic Frequency | 25 kHz |
| Transducer Type | Immersion-type with Φ8 mm titanium alloy probe |
| Stirring | Built-in magnetic stirrer (speed continuously adjustable) |
| Reaction Volume Capacity | 10–1000 mL |
| Cavity Ports | Three microwave-suppressed top ports for condenser, gas inlet/outlet, coolant, or probe insertion |
| Safety Compliance | Meets GB 10436-2008 (Microwave Leakage ≤ 1 mW/cm² at 5 cm) |
| Brand | HyYan |
|---|---|
| Origin | Jiangsu, China |
| Model | MC8S-3 |
| Temperature Range | 0–300 °C |
| Pressure Condition | Ambient (Open-Vessel Operation) |
| Microwave Power | 0–1000 W (continuous, linearly adjustable) |
| Microwave Frequency | 2.45 GHz ± 50 MHz |
| Ultrasonic Power | 0–900 W (submersible transducer) |
| Ultrasonic Frequency | 25 kHz (auto-frequency tracking) |
| UV Wavelength | 365 nm |
| UV Power | 250 W |
| Stirring | Adjustable Magnetic Stirring |
| Reaction Volume Capacity | 10–1000 mL |
| Cavity Material | Stainless Steel |
| Safety Compliance | Meets GB 10436 (Chinese Microwave Leakage Standard) |
| Interface | RS-485 (MODBUS RTU), VGA video output, touchscreen HMI |
| Key | Brand: HyYan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Model Range | BJ22, BJ26, BJ-9, CK611, CK619 |
| Frequency Bands | 915 MHz & 2450 MHz |
| Power Handling | 1 kW to 20 kW (air-cooled & water-cooled variants) |
| Coupler Specifications | 50–55 dB coupling, >20 dB directivity, N-type coaxial coupled port, waveguide mainline |
| Interface Standards | IEEE 1394-1995 (waveguide flange), MIL-DTL-3922/67 compliant flanges (optional) |
| Brand | HyYan |
|---|---|
| Model | MZYD10S |
| Output Configuration | 10 independent 1 kW microwave channels |
| Operating Frequency | 2450 MHz ±50 MHz |
| Input Voltage | AC 380 V ±10% |
| Input Apparent Power | ≤20 kVA |
| Waveguide Output | Standard BJ-26 |
| Control Architecture | Delta DVP-Series industrial PLC with HMI touchscreen interface |
| Communication Interface | RS-485, Modbus RTU protocol compliant |
| Safety Monitoring | Real-time magnetron anode current display, thermal anomaly detection, fault logging and audible/visual alarm activation |
| Compliance | Designed for integration into ISO/IEC 17025-compliant laboratory environments |
| Brand | HyYan |
|---|---|
| Origin | Jiangsu, China |
| Model | QLY-1000 |
| Control Architecture | Industrial-grade microcomputer with embedded real-time logic |
| Display Interface | Full Chinese text LCD (240×128) |
| Valve Output | AC 220 V, 50 Hz |
| Pressure Sensing Input | 0–5 V analog (corresponding to 0–1000 Torr) |
| Pressure Setpoint Output | 0–5 V DAC |
| Solenoid Valve Timing Resolution | 0.1 s |
| Solenoid Valve 1 Mode | Normally open / programmable toggle (1–120 s) |
| Solenoid Valves 2 & 3 | Synchronized operation, independent on/off timing (on: 0.5–30 s |
| off | 1–50 s) |
| Shut-off Valves 1–3 | Individually programmable (Valve 1: NO + 1–120 s toggle |
| Valves 2 & 3 | on 1–50 s / off 1–60 s) |
| Auxiliary Power Output | DC ±15 V (200 mA) |
| Enclosure | Aluminum alloy, powder-coated |
| Compliance | CE-marked industrial control unit (EN 61000-6-2/6-4), RoHS-compliant |
| Brand | i-Lab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Origin Category | Domestic |
| Model | AIRCOMP30 |
| Price | Upon Request |
| Hydrocarbon Removal Principle | Pt-Pd Catalytic Cracking |
| Output Flow Rate | 30 L/min |
| Output Pressure Range | 0–7 bar |
| Total Hydrocarbon Content | < 0.1 ppm |
| Dew Point | –20 °C |
| Compressor Type | Oil-Free Imported Scroll Compressor |
| Noise Level | ≤ 52 dB(A) |
| Power Supply | 220 V AC, 50 Hz |
| Dimensions (W×D×H) | 480 × 420 × 620 mm |
| Weight | 42 kg |
| Brand | i-Lab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Region of Origin | Domestic (China) |
| Model | AIRCOMP60 |
| Pricing | Upon Request |
| Hydrocarbon Removal Principle | Pt-Pd Catalytic Cracking |
| Output Flow Rate | 60 L/min |
| Output Pressure Range | 0–7 bar |
| Total Hydrocarbon Content | < 0.1 ppm (as methane equivalent) |
| Dew Point | –20 °C |
| Brand | i-Lab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Nitrogen Generator |
| Nitrogen Generation Principle | Hollow Fiber Membrane Separation + SFP Split Flow Purification |
| Output Flow Rate | 0–100 mL/min |
| Output Pressure | 0–4 bar |
| Nitrogen Purity | 99.999% |
| Oxygen Content | <3 ppm |
| Dew Point | ≤−60 °C |
| Flow Stability | ±0.5% |
| Noise Level | <45 dB(A) |
| Power Consumption | 100 W |
| Operating Environment | 5–35 °C, 5–80% RH |
| Interface | Modular External Gas Inlet (Air or 99.9% N₂) |
| Brand | i-Lab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HG1500 |
| Hydrogen Generation Principle | SPE (Solid Polymer Electrolyte) Proton Exchange Membrane Electrolysis |
| Output Flow Rate | 0–1500 mL/min |
| Output Pressure Options | 0–0.4 MPa / 0–0.7 MPa / 0–1.0 MPa / 0–1.5 MPa |
| Hydrogen Purity | ≥99.9995% |
| Power Consumption | 1500 W |
| Brand | i-Lab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HG200 |
| Pricing | Upon Request |
| Hydrogen Generation Principle | SPE (Solid Polymer Electrolyte) / PEM (Proton Exchange Membrane) Pure-Water Electrolysis |
| Output Flow Rate | 0–200 mL/min |
| Output Pressure | 0–8 bar |
| Hydrogen Purity | 99.9995% |
| Power Consumption | 300 W |
| Brand | i-Lab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HG300 |
| Hydrogen Generation Principle | SPE-PEM Pure Water Electrolysis |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0–8 bar |
| Hydrogen Purity | 99.9995% |
| Power Consumption | 300 W |
| Brand | i-Lab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HG3000 |
| Hydrogen Generation Principle | SPE-PEM Solid Polymer Electrolyte Electrolysis |
| Output Flow Rate | 0–3000 mL/min |
| Output Pressure Options | 0–0.4 MPa / 0–0.7 MPa / 0–1.0 MPa / 0–1.5 MPa |
| Hydrogen Purity | ≥99.9995% (v/v) |
| Power Consumption | 1500 W |
| Brand | i-Lab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) & Assembler |
| Regional Classification | Domestic (PRC) |
| Model | Fully Automated Fat Extraction and Concentration System |
| Pricing | Upon Request |
| Brand | i-Lab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | KL-GBP 80 |
| Compression Principle | Pneumatic Drive |
| Flow Rate | Up to 4 L/min (at inlet conditions) |
| Pressure Range | 0–80 bar (max output), adjustable from ambient to 80 bar |
| Media Compatibility | Compressed air, nitrogen, argon, and non-corrosive liquids (e.g., hydraulic oil) |
| Construction | 316L stainless steel gas path, oil-free lubrication |
| Control Mode | Automatic pressure-hold with self-actuated re-pressurization |
| Mounting | Compact horizontal design for benchtop or integrated OEM installation |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | i-Lab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | KL12-1 |
| Instrument Type | Nitrogen Generator |
| Nitrogen Generation Principle | Hollow Fiber Membrane Separation |
| Output Flow Rate | 12 L/min |
| Output Pressure | 0–6 bar |
| Nitrogen Purity | 99.9% |