Common Laboratory Equipment
Filter
Showing 6961–6990 of 18043 results
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | MD200-2 |
| Heating Method | Dry Block Heating |
| Temperature Range | RT+5°C to 150°C |
| Temperature Stability @40°C | ±0.3°C |
| 升温 Time (20°C → 100°C) | ≤15 min |
| Timer Range | 1 min – 100 h |
| Display Resolution | 0.1°C |
| Gas Flow Rate | 0–10 L/min |
| Gas Pressure Limit | ≤0.1 MPa |
| Sample Capacity | 2 × standard modular blocks (e.g., 2 × 12-position, 16.5 mm diameter) |
| Block Dimensions | 330 × 220 × 540 mm |
| Net Weight | 8 kg |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 400 W |
| Needle Length | 150 mm |
| Control Interface | LCD display with 5-segment programmable timer |
| Safety Features | Over-temperature protection, real-time temperature monitoring, automatic fault detection and audible alarm |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | MS-CZ200 |
| Instrument Type | Magnetic Stirrer |
| Max. Stirring Volume | 200 L |
| Speed Range | 20–1000 rpm |
| Max. Weighing Capacity | 500 kg |
| Weighing Resolution | 0.01 kg |
| Weighing Accuracy | ±0.02 kg |
| Stirring Timer | 1–9999 min |
| Standard Stir Bar | 16 × 100 mm |
| Work Surface Material | 304 Stainless Steel |
| Motor Type | Brushless DC Motor |
| Power Supply | AC 220 V ±10% |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | HUXI Scientific Instrument Co., Ltd. |
| Model | RWD100 |
| Stirrer Type | Overhead Electric Stirrer |
| Max. Mixing Volume | 40 L |
| Speed Range | 30–2200 rpm |
| Speed Display | LCD |
| Speed Accuracy | ±1 rpm |
| Speed Control | Coarse + Fine Adjustment |
| Timer Range | 1–9999 min |
| Timer Display | LCD |
| Max. Torque | 40 N·cm |
| Max. Viscosity | 50,000 mPa·s |
| Input Power | 120 W |
| Output Power | 100 W |
| Protection Class | IP42 |
| Motor Type | Brushless DC Motor |
| Overload/Short-Circuit Protection | Automatic Cut-off with Visual & Audible Alarm |
| Safety Features | Chuck Guard Sleeve + Non-slip Base Pad |
| Operating Ambient Temperature | 5–40 °C |
| Operating Ambient Humidity | ≤80% RH |
| Host Dimensions (W×D×H) | 210 × 290 × 800 mm |
| Host Net Weight | 6.5 kg |
| Packaged Host Weight | 7.7 kg |
| Complete Set Net Weight | 7.5 kg |
| Complete Set Packaged Weight | 11 kg |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | HUXI Scientific Instrument Co., Ltd. |
| Model | RWD150 |
| Instrument Type | Overhead Electric Stirrer |
| Max. Mixing Volume | 60 L |
| Speed Range | 30–2200 rpm |
| Speed Display | LCD |
| Speed Accuracy | ±1 rpm |
| Speed Control | Coarse + Fine Adjustment |
| Timer Range | 1–9999 min |
| Torque | 60 N·cm |
| Max. Viscosity | 80,000 mPa·s |
| Input Power | 160 W |
| Output Power | 150 W |
| Protection Rating | IP42 |
| Operating Temperature | 5–40 °C |
| Operating Humidity | ≤80% RH |
| Dimensions (W×D×H) | 210 × 290 × 800 mm |
| Net Weight | 6.5 kg |
| Gross Weight (Packaged) | 7.7 kg |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | RWD50 |
| Instrument Type | Overhead Electric Stirrer |
| Max. Mixing Volume | 20 L |
| Speed Range | 30–2200 rpm |
| Temperature Control | Ambient Only |
| Display | LCD |
| Speed Accuracy | ±1 rpm |
| Speed Adjustment | Coarse + Fine |
| Timer Range | 1–9999 min |
| Max. Torque | 40 N·cm |
| Max. Viscosity | 10,000 mPa·s |
| Input Power | 60 W |
| Output Power | 50 W |
| Protection Rating | IP42 |
| Operating Environment | 5–40 °C, ≤80% RH |
| Net Weight (Unit) | 4.4 kg |
| Gross Weight (Packaging) | 6.5 kg |
| Dimensions (Unit) | 315 × 200 × 780 mm |
| Packaging Dimensions | 475 × 340 × 200 mm |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | HUXI (OEM/ODM Capable) |
| Model | RWD500 |
| Instrument Type | Electric Benchtop Stirrer |
| Max. Mixing Volume | 500 L |
| Speed Range | 200–1000 rpm |
| Speed Accuracy | ±1 rpm |
| Input Voltage | 200–240 V AC, 50–60 Hz |
| Motor Type | Brushless DC Motor |
| Input Power | 1000 W |
| Output Power | 500 W |
| Timer Range | 0–9999 min |
| 升降 Travel | 500 mm (Motorized) |
| Clamp Type | Self-locking Chuck |
| Clamp Jaw Range | 3–16 mm |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Dimensions (W×D×H) | 1150×650×1150 mm |
| Net Weight | 35 kg |
| Gross Weight | 40 kg |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | RWD50AS |
| Instrument Type | Overhead Stirrer |
| Maximum Mixing Volume | 20 L |
| Speed Range | 30–2200 rpm |
| Temperature Control Range | −160 to 600 °C |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | 0.1–2.5 µL |
| Instrument Type | Single-Channel Manual Pipette |
| Automation Level | Manual |
| Channel Count | 1 |
| Volume Range | 0.1–2.5 µL |
| Maximum Capacity | 2.5 µL |
| Accuracy | ±3.0% at 2.5 µL |
| Increment | 0.05 µL |
| Sterilization Method | Autoclavable (121 °C, 20 min) |
| Tip Ejector | Removable and Autoclavable |
| Ergonomic Design | Palm-Hook Handle |
| Display | High-Contrast Volume Window |
| Accessories Included | Pipette Hook, Tip Ejector Removal Tool |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHB-IIIA |
| Instrument Type | Circulating Water Vacuum Pump |
| Product Category | Oil-Free Vacuum Pump |
| Air Displacement Rate | 80 L/min |
| Ultimate Vacuum | 0.098 MPa |
| External Dimensions (L×W×H) | 385 × 280 × 420 mm |
| Net Weight | 11 kg |
| Motor Power | 180 W |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ST-12 |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 100 °C |
| Temperature Stability | ±1 °C |
| Sample Capacity | 12 positions |
| Tube Diameter Compatibility | 16.5 mm |
| Gas Flow Rate | 0–15 L/min |
| Heating Power | 600 W |
| Dimensions (W×D×H) | 340 × 200 × 460 mm |
| Weight | 7 kg |
| Material in Contact with Solvents | 316 Stainless Steel |
| Control System | Digital PID Temperature Controller with Dual LED Display and Over-Temperature Alarm |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Vortex-1 |
| Operating Mode | Touch-Start / Continuous Operation |
| Speed | 2800 rpm |
| Motion Type | Orbital (Circular) |
| Amplitude | 4 mm orbital diameter |
| Housing Material | Reinforced engineering thermoplastic (paint-free, acid/alkali resistant, impact-resistant) |
| Base Surface Material | TPU-coated corrosion- and wear-resistant platform |
| Foot Design | Silicone anti-slip pads |
| Display | Fixed-speed indication (no digital RPM readout) |
| Voltage | 100–120 V or 200–230 V (configurable) |
| Frequency | 50/60 Hz |
| Power Input | 60 W |
| Motor Type | Shaded-pole motor |
| Motor Output | 11 W |
| Dimensions (W×D×H) | 165 × 130 × 140 mm |
| Net Weight | 2.0 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80% RH (non-condensing) |
| Ingress Protection Rating | IP21 |
| Standard Accessories | One universal conical cup adapter (TPU-coated, wear-resistant) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | HUXI Scientific Instrument Co., Ltd. |
| Model | Vortex-2 |
| Rated Voltage | 100–120 V / 200–230 V (configurable) |
| Frequency | 50/60 Hz |
| Power Input | 60 W |
| Motor Output Power | 11 W |
| Speed Range | 0–2800 rpm |
| Speed Display | Analog dial scale |
| Orbit Diameter | 4 mm |
| Operating Mode | Touch (pulse) or continuous |
| Motion Type | Circular orbital shaking |
| Base Material | Reinforced engineering plastic (paint-free, acid/alkali resistant, impact resistant) |
| Platform Surface | TPU-coated corrosion- and wear-resistant surface |
| Footing | Silicone anti-slip pads |
| Dimensions (W×D×H) | 165 × 130 × 140 mm |
| Net Weight | 2.0 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80% RH |
| Ingress Protection Rating | IP21 |
| Standard Accessories | Universal cup head (wear-resistant) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Vortex-5S |
| Operating Mode | Optical-Sensor Touch / Continuous |
| Speed Range | 100–3000 rpm |
| Oscillation Type | Orbital (Circular) |
| Speed Display | LCD |
| Voltage Input | 100–240 V AC, 50–60 Hz |
| Motor Type | Permanent-Magnet DC Motor |
| Timer Range | 1 s to 99 h 59 min 59 s |
| Timer Display | LCD |
| Orbit Diameter | 4 mm |
| Power Consumption | 60 W |
| Base Material | Zinc Alloy |
| Footpads | Silicone Damping Pads |
| Dimensions (W×D×H) | 165 × 130 × 140 mm |
| Net Weight | 3.0 kg |
| Gross Weight | 3.5 kg |
| Operating Temperature | 5–40 °C |
| Operating Humidity | ≤80% RH (non-condensing) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Vortex-8S |
| Speed Range | 200–3000 rpm (±15 rpm) |
| Operating Modes | Touch-Activated / Continuous |
| Oscillation Type | Circular |
| Amplitude | 4.6 mm |
| Display | High-Brightness LED Digital Display |
| Power Supply | DC 24 V |
| Input Power | 18 W |
| Max Load Capacity | 1.5 kg |
| Timer Range | 1 s – 999 min (Count-Up / Count-Down) |
| Noise Level at Max Speed | ≤45 dB(A) |
| Acceleration/Deceleration Time | ≤3 s |
| Dimensions (W×D×H) | 198 × 138 × 67 mm |
| Weight | 4.1 kg |
| Enclosure Material | ABS |
| IP Rating | IP20 |
| Operating Environment | 5–40 °C, ≤80% RH |
| Standard Accessories | 8S-1 to 8S-6 Universal Mounting Adapters |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Vortex-M |
| Operating Principle | Circular Oscillation |
| Maximum Speed | 4000 rpm (Fixed) |
| Activation Mode | Touch-Start (Momentary) |
| Amplitude Type | Circular (4.5 mm orbit diameter) |
| Housing Material | Chemical-Resistant Engineering Plastic |
| Base Material | Zinc-Aluminum Alloy |
| Display | Fixed-Speed Indicator (No Variable Control) |
| Power Supply | AC 100–240 V / DC 24 V |
| Max. Power Consumption | 15 W |
| Operating Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% RH |
| IP Rating | IP43 |
| Dimensions (Ø × H) | 92 × 81 mm |
| Weight | 1.0 kg |
| Max. Tube Capacity | 1 × 80 mL |
| Max. Tube Diameter | 30 mm |
| Compliance | CE-marked per IEC 61010-1 for laboratory equipment safety |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Vortex-MULTI |
| Speed Range | 100–2000 rpm |
| Operating Modes | Continuous & Timer-Controlled |
| Oscillation Mode | Orbital |
| Amplitude | 3 mm |
| Speed Display | LCD |
| Max Load Capacity | 2 kg |
| Power Consumption | 75 W |
| Input Voltage | 100–240 V AC, 50–60 Hz |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80% RH |
| Dimensions (W×D×H) | 380 × 260 × 165 mm |
| Standard Configuration | 12-position 50 mL adapter |
| Brand | TOP (Tianjin) |
|---|---|
| Model | HV-1 |
| Output Voltage Range | 0–1000 V DC, Continuously Adjustable |
| Max. Output Current | 1.5 mA DC |
| Voltage Display | 3½-digit LED |
| Voltage Stability | ≤0.03 %/h |
| Control Mode | Manual (optional auto-control interface available upon request) |
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Domestic Classification | Domestic Equipment |
| Brand | HVA |
|---|---|
| Origin | USA |
| Model | HVA 88200 Series Rectangular Gate Valve (Gate-Type Vacuum Isolation Valve) |
| Baking Temperature (Elastomer Seal) | 150°C |
| Baking Temperature (Actuator) | 60°C |
| Ultimate Pressure Range | 1×10⁻⁹ mbar |
| Helium Leak Rate | <2×10⁻⁹ mbar·L/s |
| Differential Pressure Rating (Bidirectional Closure) | ≤1 bar |
| Max Inlet Pressure Prior to Opening | <30 mbar |
| Pneumatic Supply Pressure | 80 psig |
| Solenoid Power Consumption | 4.3 W (Latching Type) |
| Supply Voltage Options | 120 VAC, 50/60 Hz (Standard) |
| Optional | 24/200/240 VAC, 50/60 Hz or 12/24 VDC |
| Position Indicator Max Rating | 115 VAC or 28 VDC, 20 mA |
| Body & Gate Material | 6061-T6 Aluminum |
| Bellows Material | AM-350 Stainless Steel |
| Stem & Pin Material | Hardened Stainless Steel |
| Seal Material | Viton® Elastomer |
| Cycle Life | ≥1,000,000 cycles (process-dependent) |
| Vacuum Compatibility | Certified for 1×10⁻⁹ mbar base pressure |
| High-Temp Vacuum Processing | Qualified for continuous operation at 200°C under 1×10⁻⁹ mbar |
| Key | Speed Range: 60–600 rpm |
|---|---|
| Amplitude | 30 mm |
| Power Supply | 220 V ±10%, 50–60 Hz, 1.0 A |
| Dimensions (L×W×H) | 320 × 320 × 340 mm |
| Sample Capacity | Compatible with 10–100 mL centrifuge tubes, stoppered graduated cylinders, and volumetric flasks |
| Noise Level | Low |
| Operation Mode | Continuous or timer-controlled, infinitely variable speed, soft-start function |
| Origin | Shanghai, China |
| Regulatory Compliance | Designed for GLP-compliant laboratories |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HX-5A |
| Price | USD 1,050 (FOB Shanghai) |
| Temperature Range | −10 °C to +99 °C |
| Temperature Stability | ±0.1 °C |
| Circulation Flow Rate | 10 L/min |
| Heating/Cooling Power | 300 W |
| Reservoir Volume | 5 L |
| Internal Tank Dimensions (W×D×H) | 305×145×115 mm |
| Open Bath Opening (W×D×H) | 185×140×110 mm |
| External Dimensions (W×D×H) | 430×285×575 mm |
| Brand | Huiyan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | HY-JL22FA |
| Quotation | Upon Request |
| Cavity Material | Oxygen-Free Copper or 6061-T6 Aluminum |
| Waveguide Interface | Standard BJ-22 (WR-284, 72.14 mm × 34.04 mm) |
| Rated Power Handling | 3 kW CW (with 2 kW / 3 kW Magnetron Compatibility) |
| Operating Frequency Range | 2.45 GHz ± 15 MHz |
| Cooling | Forced Air or Water-Cooled Mounting Base (Optional) |
| Brand | Huiyan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HY-JL9FA |
| Price | Upon Request |
| Waveguide Standard | BJ-9 |
| Operating Frequency | 915 MHz |
| Construction Material | Anodized Aluminum Alloy |
| Compatible Magnetron Power Range | 5 kW – 20 kW |
| Compatible Magnetron Models | CK611, CK147, and other standard industrial 915 MHz magnetrons |
| Brand | HY-Research |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HY-JL22FB |
| Pricing | Upon Request |
| Waveguide Interface | BJ-22 Flange |
| Flange Material | FDP22 (Copper Alloy, Nickel-Plated) |
| Rated Power Handling | 2 kW (Compatible with 2–3 kW Magnetrons) |
| Brand | HY-Research |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | HY-JL26FB |
| Pricing | Available Upon Request |
| Frequency | 2450 MHz ±50 MHz |
|---|---|
| Power Output | 0–1500 W (non-pulsed continuous & adjustable pulsed modes) |
| Temperature Range | 0–300 °C, accuracy ±1 °C |
| Temperature Sensor | Pt100 contact probe with corrosion-resistant tip |
| Timing Control | 0–900 min, resolution 1 s |
| Reaction Volume | 10–1000 mL |
| Stirring | Dual-mode (magnetic & mechanical, speed continuously adjustable) |
| Safety | Microwave leakage < GB 10436-2008 limit |
| Control System | Industrial PLC + full-color Chinese touchscreen HMI |
| Safety Interlocks | Magnetron overtemperature protection, door interlock, cavity shielding |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GC300, GC600 |
| Hydrogen Flow Rate | 300 mL/min, 600 mL/min |
| Purity | ≥99.9999% (6.0 N) |
| Output Pressure | Up to 200 psig (13.8 bar) |
| Water Feed | Automatic Deionized Water Intake |
| Core Technology | Proton Exchange Membrane (PEM) Electrolysis |
| Origin | Finland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HG Series (HG-80 to HG-1500) |
| Pricing | Available Upon Request |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | HLH-1L |
| Pricing | Available Upon Request |
| Hydrogen Purity | >99.999% |
| Flow Rate | 0–1 L/min |
| Output Pressure | 0–0.4 MPa (Factory Set at 0.3 MPa) |
| Max Power Consumption | 400 W |
| Operating Environment | 10–40 °C, Relative Humidity ≤85%, Non-corrosive, Low-dust Ambient |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | HLH-700II |
| Pricing | Available Upon Request |
| Hydrogen Purity | >99.999% |
| Flow Rate | 0–700 mL/min |
| Output Pressure | 0–0.4 MPa (Factory Set at 0.3 MPa) |
| Max Power Consumption | 250 W |
| Operating Environment | 10–40 °C, RH ≤85%, Non-corrosive, Low-dust Ambient |
| Brand | Zhonghui Pu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TH-3000PSA |
| Hydrogen Generation Principle | Pure Water Electrolysis |
| Output Flow Rate | 0–3000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 2800 W |
| Operating Temperature | 1–40 °C |
| Relative Humidity | ≤85% RH |
| Input Voltage | 220 V ±10% |
| Dimensions (W×D×H) | 680 × 680 × 900 mm (height excludes casters) |
| Net Weight | ~105 kg |
| Certifications | CE-compliant |