Common Laboratory Equipment
Filter
Showing 8131–8160 of 18316 results
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.5A |
| Ultimate Vacuum Pressure | 200 mbar (abs) |
| Positive Pressure Output | 0.08 MPa (g) |
| Pumping Speed | 30 L/min |
| Motor Power | 160 W |
| Operating Temperature Range | 7–40 °C |
| Max Ambient Temp During Operation | <60 °C |
| Noise Level | <55 dB(A) |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Dimensions (L×W×H) | 210 × 160 × 235 mm |
| Weight | 8 kg |
| Diaphragm Material | Fluoroelastomer (FKM) |
| Bearing Type | Imported Precision Ball Bearings |
| Cooling | Integrated Air-Cooled Exhaust System |
| Duty Cycle | Continuous (24/7) |
| Dual-Mode Operation | Vacuum & Positive Pressure |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.5A |
| Pump Type | Diaphragm Pump |
| Oil-Free Design | Yes |
| Ultimate Vacuum | 850 mbar (abs) |
| Flow Rate | 30 L/min |
| Motor Power | 160 W |
| Dimensions (L×W×H) | 210 × 160 × 235 mm |
| Weight | 8 kg |
| Operating Temperature Range | 7–40 °C |
| Max Ambient Temp During Operation | <60 °C |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Noise Level | <55 dB(A) |
| Pressure Range | −850 mbar to +40 psi (dual-mode) |
| Diaphragm Material | Fluoroelastomer (FKM) |
| Bearing Type | Imported Precision Ball Bearings |
| Cooling | Integrated Air-Cooled Exhaust System |
| Compliance | CE-marked for laboratory use per IEC 61010-1 |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.5A Dual-Mode |
| Pump Type | Diaphragm |
| Oil-Free Design | Yes |
| Air Displacement Rate | 30 L/min |
| Ultimate Vacuum | 200 mbar (abs) |
| Positive Pressure Output | ≥0.08 MPa (≥11.6 psi) |
| External Dimensions | 230 × 180 × 265 mm |
| Weight | 7.5 kg |
| Motor Power | 160 W |
| Operating Temperature Range | 5–40 °C |
| Noise Level | <60 dB(A) |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Motor Certification | CE-compliant (EN 60335-1, EN 61000-6-3) |
| Diaphragm Material | Imported FKM/FPM fluoroelastomer |
| Wetted Parts Surface Treatment | PTFE-coated |
| Cooling | Integrated passive airflow system |
| Thermal Protection | Bimetallic overheat cutoff at 130 °C |
| Standard Accessories | Analog vacuum/pressure gauge (−0.1 MPa range), silicone-reinforced PVC tubing (Ø7×12 mm, 80 cm) |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Pump Type | Oil-Free Diaphragm Pump |
| Dual-Mode Operation | Vacuum & Pressure (Positive/Negative) |
| Ultimate Vacuum | ≤ 0.075 MPa (75 kPa absolute) |
| Maximum Positive Pressure | ≥ 30 psi (207 kPa) |
| Air Flow Rate (Vacuum/Pressure Mode) | 30 L/min |
| Motor Power | 120 W, Single-Phase |
| Noise Level | < 55 dB(A) |
| Operating Temperature Range | 7–40 °C |
| Pump Head Material | Anodized Aluminum Alloy with Corrosion-Resistant Coating |
| Diaphragm Material | Fluoroelastomer (FKM) |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Dimensions (W×D×H) | 215 × 165 × 270 mm |
| Net Weight | 8 kg |
| Continuous Duty Rating | Yes (Equipped with Integrated Air-Cooling System) |
| Compliance | Designed for GLP-compliant laboratory environments |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GM-0.5A |
| Instrument Type | Diaphragm Pump |
| Product Type | Oil-Free Vacuum Pump |
| Pumping Speed | 30 L/min |
| Ultimate Vacuum Pressure | 200 mbar (abs) |
| Motor Power | 160 W |
| Operating Temperature Range | 7–40 °C |
| Max. Surface Temperature | <60 °C |
| Noise Level | <55 dB(A) |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Dimensions (W×D×H) | 210 × 160 × 235 mm |
| Net Weight | 8 kg |
| Dual-Mode Operation | Vacuum & Pressure (±) |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.5B |
| Ultimate Vacuum | ≥0.095 MPa (≥50 mbar) |
| Pumping Speed | 30 L/min |
| Motor Power | 160 W |
| Noise Level | <50 dB(A) |
| Operating Temperature Range | 7–40 °C |
| Max. Ambient Temperature During Operation | <55 °C |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Dimensions (L×W×H) | 300×120×235 mm |
| Weight | 10 kg |
| Cooling | Self-cooled, continuous-duty design |
| Pressure Regulation | Adjustable vacuum output |
| Construction | Die-cast aluminum housing |
| Configuration | Dual-head negative-pressure diaphragm pump |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.5B |
| Pump Type | Diaphragm Vacuum Pump |
| Oil-Free Operation | Yes |
| Ultimate Vacuum | 0.095 MPa (≈50 mbar) |
| Air Displacement Rate | 30 L/min |
| Motor Power | 160 W |
| Dimensions (L×W×H) | 300 × 120 × 235 mm |
| Weight | 10 kg |
| Operating Temperature Range | 7–40 °C |
| Maximum Surface Temperature | <55 °C |
| Noise Level | <50 dB(A) |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Cooling | Self-contained air-cooled exhaust system |
| Duty Cycle | Continuous operation capable |
| Pressure Regulation | Adjustable vacuum output |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.5B |
| Pump Type | Diaphragm Vacuum Pump |
| Oil-Free Design | Yes |
| Ultimate Vacuum | 50 mbar |
| Air Displacement Rate | 30 L/min |
| Motor Power | 160 W |
| Dimensions (L×W×H) | 350 × 130 × 220 mm |
| Weight | 10 kg |
| Noise Level | <60 dB(A) |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Operating Temperature Range | 7–40 °C |
| Max. Pump Body Temperature | <55 °C |
| Pressure Regulation | Adjustable |
| Cooling | Integrated Forced-Air Ventilation System |
| Diaphragm Material | Imported Nitrile Rubber (NBR) with Chemical Resistance |
| Wetted Parts Surface Treatment | PTFE (Teflon®) Coating |
| Safety Protection | Thermal Cut-Off at 130 °C |
| Certification | CE-compliant Motor (ODM-sourced) |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.5B |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | ≥0.095 MPa (200 mbar) |
| Air Displacement Rate | 30 L/min |
| Motor Power | 160 W |
| Inlet/Outlet Port Diameter | Φ6 mm |
| Operating Temperature Range | 7–40 °C |
| Pump Body Temperature | <55 °C |
| Noise Level | <50 dB(A) |
| Dimensions (L×W×H) | 215×120×235 mm |
| Weight | 7.5 kg |
| Diaphragm & Valve Material | Imported Elastomer |
| Housing Material | Die-Cast Aluminum Alloy |
| Electrical Supply | 230 VAC, 50 Hz |
| Corrosion Protection | PTFE-Coated Internal Components |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-1.0A (GM-1.00) |
| Pump Type | Diaphragm Vacuum Pump |
| Oil-Free Design | Yes |
| Dual-Mode Operation | Vacuum & Positive Pressure |
| Ultimate Vacuum | ≤ −0.075 MPa (≤ 75 kPa absolute) |
| Maximum Flow Rate | 60 L/min |
| Motor Power | 120 W |
| Dimensions (L×W×H) | 282 × 155 × 200 mm |
| Weight | 10 kg |
| Operating Temperature Range | 7–40 °C |
| Noise Level | < 55 dB(A) |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Cooling | Self-contained air-cooling system |
| Continuous Duty Rating | Yes |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-1.0A |
| Pump Type | Diaphragm Pump |
| Ultimate Vacuum | 200 mbar |
| Maximum Positive Pressure | 0.08 MPa (40 psi) |
| Flow Rate | 60 L/min |
| Motor Power | 160 W |
| Noise Level | <55 dB(A) |
| Operating Temperature Range | 7–40 °C |
| Pump Head Temperature | <60 °C |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Dimensions (L×W×H) | 300×160×235 mm |
| Weight | 9 kg |
| Cooling | Self-contained Air-Cooling System |
| Compliance | CE-marked for laboratory use per IEC 61010-1 |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GM-1.0A |
| Price | USD 280 (FOB China) |
| Air Displacement | 60 L/min |
| Ultimate Vacuum | 200 mbar (abs) |
| Positive Pressure Output | 0.08 MPa (11.6 psi) |
| Noise Level | <55 dB(A) |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Dimensions (L×W×H) | 300×160×235 mm |
| Motor Power | 160 W |
| Operating Temperature Range | 7–40 °C |
| Max. Pump Head Temperature | <60 °C |
| Weight | 10 kg |
| Cooling | Integrated passive airflow system |
| Dual-Head Configuration | Simultaneous vacuum & positive pressure operation |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-1.0A Dual-Mode |
| Pump Type | Oil-Free Diaphragm |
| Air Displacement Rate | 60 L/min |
| Ultimate Vacuum | 200 mbar (abs) |
| Positive Pressure Output | ≥30 psi (0.207 MPa) |
| External Dimensions | 310 × 200 × 210 mm |
| Weight | 10 kg |
| Motor Power | 160 W |
| Operating Temperature Range | 7–40 °C |
| Noise Level | <60 dB(A) |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Motor Certification | CE-compliant |
| Cooling | Integrated Forced-Air Ventilation System |
| Diaphragm Material | Imported FKM/FPM Fluoroelastomer |
| Wetted Parts Surface Treatment | PTFE (Teflon®) Coating |
| Thermal Protection | Automatic Cut-off at 130 °C |
| Continuous Duty Rating | 24-hour Uninterrupted Operation |
| Brand | JINTENG |
|---|---|
| Origin | Shanghai, China |
| Model | GM-1.0A |
| Pump Type | Diaphragm Vacuum Pump |
| Oil-Free Design | Yes |
| Ultimate Vacuum | ≥0.08 MPa (200 mbar) |
| Air Displacement Rate | 60 L/min |
| Motor Power | 160 W |
| Inlet/Outlet Port Diameter | Φ6 mm |
| Diaphragm & Valve Material | Imported EPDM/NBR Rubber |
| Housing Material | Die-Cast Aluminum Alloy |
| Corrosion Protection | PTFE-Coated Pump Head |
| Operating Ambient Temperature | 7–40 °C |
| Maximum Housing Temperature | <55 °C |
| Dimensions (L×W×H) | 215 × 120 × 235 mm |
| Noise Level | <50 dB(A) |
| Weight | 7.5 kg |
| Electrical Supply | 230 VAC, 50 Hz |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | B-220 |
| Temperature Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±1 °C |
| Bath Chamber Dimensions | 22 × 11.5 cm (L × W) |
| Heating Power | 1 kW |
| External Dimensions (W × D × H) | 32 × 28 × 18 cm |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | RE-3000AA |
| Evaporation Flask Capacity | 50–3000 mL |
| Ultimate Vacuum Range | –0.01 to –0.095 MPa (built-in vacuum controller, accuracy ±0.2–0.5%) |
| Rotation Speed | 0–200 rpm (bidirectional rotation) |
| Temperature Control Range | Room temperature to 99 °C (PID-controlled water bath, color touchscreen display) |
| Temperature Accuracy | ±1 °C |
| Condenser Surface Area | 0.15 m² (dual-flow vertical condenser with standardized 24/40 ground-glass joints and extended glass shaft tube) |
| Connection Interface | M42 bayonet-type locking nut |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | RE-3000D |
| Evaporation Flask Capacity | 50–3000 mL |
| Rotation Speed Range | 0–200 rpm |
| Temperature Control | PID-controlled heating bath with digital display, ambient to 99 °C |
| Temperature Accuracy | ±1 °C |
| Condenser Type | Cold-trap (dry-ice-cooled) |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RE-52 |
| Rotating Flask Capacity | 50–2000 mL |
| Rotation Speed Range | 0–150 rpm |
| Temperature Control Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±1 °C |
| Condensing Surface Area | 0.08 m² (coiled cold finger condenser) + optional dry ice cooling interface |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | RE-5203 |
| Capacity | 3 L |
| Rotational Speed | Electronically Controlled, 0–120 rpm with Digital Controller |
| Temperature Control Range | Digital Display, Automatic Control from Ambient to 99 °C |
| Temperature Accuracy | ±1 °C |
| Condenser Cooling Surface Area | 0.15 m² |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | RE-5298 |
| Capacity | 3 L |
| Rotational Speed | Electronically Controlled, 0–100 rpm |
| Temperature Control Range | Digital Thermostatic Control, Ambient to 99 °C |
| Temperature Accuracy | ±1 °C |
| Condenser Type | Dual-Return Standard-Ground-Joint Condenser |
| Condensing Area | 0.15 m² |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | RE-5299 |
| Standard Flask Capacity | 250 mL rotating flask (pear-shaped, 24/29 joint) + 500 mL collection flask (round-bottom, 24/29 joint) |
| Rotational Speed Range | 0–130 rpm |
| Temperature Control Range | Ambient to 99 °C (digital PID temperature controller with LED display) |
| Temperature Accuracy | ±1 °C |
| Condenser Cooling Surface Area | 0.12 m² |
| Drive Type | DC motor with digital speed regulation |
| Lift Mechanism | Motorized vertical lift (electromechanical) |
| Condenser Configuration | Vertical top-entry condenser with dual-layer cooling jacket |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Circulating Water Vacuum Pump |
| Product Category | Oil-Free Vacuum Pump |
| Air Displacement (per port) | 10 L/min |
| Ultimate Vacuum | 0.098 MPa (735 Torr) |
| Dimensions (W×D×H) | 40 × 39 × 45 cm |
| Weight | 10.5 kg |
| Motor Power | 180 W |
| Rated Voltage/Frequency | 220 V AC / 50 Hz |
| Water Reservoir Capacity | 15 L |
| Total Flow Rate | 60 L/min |
| Maximum Head | 8 m |
| Pump Heads | 2 |
| Housing & Impeller Material | Corrosion-Resistant Polypropylene (PP) |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SZ-97A |
| Pricing | Available Upon Request |
| Brand | Jipeng |
|---|---|
| Origin | Shanghai, China |
| Model | BT-100ST |
| Pump Head | YZ1515 |
| Flow Range | 0.06–2290 mL/min |
| Speed Range | 0.1–350 rpm (bidirectional) |
| Display | 4.5-inch HD capacitive touchscreen (Chinese UI) |
| Flow Accuracy | ±0.5% |
| Maximum Pressure | ≥3 kg/cm² |
| Compatible Tubing | #13, #14, #16, #17, #18, #19, #25 |
| Power Supply | AC 220 V, 50/60 Hz |
| Dimensions (W×D×H) | 330 × 170 × 170 mm |
| Weight | 3.56 kg |
| Control Interface | External TTL-level start/stop trigger |
| Calibration Function | Yes |
| Memory Retention | Yes (parameter auto-save on power-off) |
| Full-Speed Mode | One-button activation |
| Timing Resolution | 0.1 s (operation), 1 ms (internal) |
| Dispensing Range | 0.1 mL – 99999.9 mL |
| Timer Range | 0.1 s – 99999.999 h |
| Sleep Timer | 0 s – 9 h 59 min 59 s |
| Distribution Cycles | 0–9999 (0 = continuous) |
| Distribution Interval | 0–6553.5 s |
| Brand | Jipeng |
|---|---|
| Origin | Shanghai, China |
| Model | HL-2S |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 2 × (0.5–900) mL/h |
| Speed Range | 0–65 rpm |
| Pressure Rating | ≥3 kg/cm² |
| Display | Gold LED Digital Display |
| Pump Head | Dual-channel, 6-roller, PTFE-lined |
| Tube Compatibility | 1.2×3 mm and 3×5 mm silicone/PTFE tubing |
| Power Supply | AC 220 V, 50/60 Hz |
| Dimensions (L×W×H) | 125×150×180 mm |
| Weight | 1.5 kg |
| Direction Control | Reversible (forward/reverse) |
| External Control Interface | Yes |
| Housing Material | ABS plastic, injection-molded, ergonomic 80° angled panel |
| Brand | JIQUN |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | MINI-X |
| Price Range | USD 14,000 – 28,000 |
| Liquid Handling Volume Range | 0.2–100+ mL |
| Sample Carrier Compatibility | Removable sample tray supporting 96-well microplates, vials, and tubes |
| Dispensing Accuracy | Engineered for high reproducibility in routine dilution workflows |
| Mixing Method | Integrated magnetic stirring module |
| Enclosure Material | Chemical-resistant engineering plastics |
| Control Interface | Detachable industrial-grade capacitive touchscreen |
| Installation Flexibility | Benchtop and fume hood-compatible footprint |
| Regulatory Alignment | Designed to support GLP-compliant documentation practices and audit-ready operation logs |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JB-1000 |
| Heating Configuration | Box-Type Muffle Furnace |
| Maximum Operating Temperature | 1000 °C |
| Rated Power | 2.5 kW |
| Compliance | CE-marked design per IEC 61000-6-3 (EMC) and IEC 61000-6-2 (Immunity) |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-GF |
| Instrument Type | General-Purpose Forced-Air Oven |
| Temperature Range | RT to 200 °C |
| Temperature Uniformity | ±1 °C |
| External Dimensions | 450 × 450 × 500 mm |
| Internal Chamber Dimensions | 300 × 300 × 350 mm |
| Interior Material | Stainless Steel (AISI 304) |
| Heating Method | Electric Resistive Heating |
| Temperature Control Resolution | 0.1 °C |
| Timer Range | 1–9999 min |
| Viewing Window | Double-Layer Heat-Resistant Glass |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB Series |
| Instrument Type | Box-Type Furnace |
| Max Temperature | 1650 °C |
| Temperature Uniformity | ±1 °C |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Internal Chamber Dimensions | 600 × 400 × 300 mm (D × W × H) |
| Power Rating | ~20 kW |
| Voltage | 380 V AC |
| Thermocouple Type | Type B (PtRh30–PtRh6) |
| Vacuum Level (Cold) | –0.1 MPa |
| Gas Inlets | 2 independent ports with float-type flowmeters (0–2 L/min) |
| Insulation Material | High-purity polycrystalline alumina ceramic fiber (>92% Al₂O₃) |
| Control System | Yudian intelligent programmable PID controller (30-segment ramp-soak profile, auto-tuning, ±1 °C accuracy) |
| Safety Protections | Over-temperature, thermocouple break, over-current, over-voltage, and deviation alarm |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-120 |
| Instrument Type | Mortar Grinder |
| Sample Suitability | Hard & Brittle Solids |
| Output Particle Size | 0.01–0.5 mm |
| Mortar Diameter | 120 mm |
| Mortar Depth | 34 mm |
| Pestle Speed | 20–90 rpm |
| Mortar Speed | 10 rpm |
| Pestle Power | 25 W |
| Mortar Power | 10 W |
| Grinding Time Range | 1–900 min |
| Dimensions (L×W×H) | 240 × 240 × 500 mm |
| Weight | 12 kg |
| Voltage | 110/220 V, 50/60 Hz |
| Material | Natural Agate (Mortar & Pestle) |