Common Laboratory Equipment
Filter
Showing 8101–8130 of 18367 results
| Brand | Jingrongyuan |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JRY-DXW |
| Operating Modes | Continuous / Touch-Activated / Adjustable Speed |
| Speed Range | 500–2500 rpm |
| Oscillation Type | Reciprocating Motion |
| Amplitude | 6 mm |
| Housing Material | Powder-Coated Steel (Corrosion-Resistant) |
| Speed Display | PID Digital Display |
| Timer Function | Yes |
| Tube Holder Compatibility | Interchangeable Foam-Based Tube Holders (Multiple Sizes) |
| Noise Level | ≤45 dB(A) at 1 m |
| Dimensions (W×D×H) | 130 × 150 × 160 mm |
| Weight | 2.8 kg |
| Power Supply | AC 220 V, 50 Hz |
| Safety Certification | CE-compliant design, IP20 enclosure rating |
| Brand | Jingrongyuan |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JRY-GP 500×300 |
| Instrument Type | Roller Mixer (Not Magnetic Stirrer) |
| Max. Sample Volume per Vial | 8 L |
| Speed Range | 0–300 rpm |
| Temperature Control | Ambient Only |
| Motor Power | 100 W |
| Compliance | GB/T 24533–2019 |
| Brand | Jingrongyuan |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JRY-L10 |
| Extraction Time Range | 0–9999 min |
| Oscillation Mode | Vertical |
| Simultaneous Extraction Capacity | 10 separatory funnels |
| Oscillation Frequency | 0–350 rpm (infinitely adjustable) |
| Noise Level | <60 dB(A) |
| Oscillation Amplitude | 50 mm |
| Rated Voltage | 220 V, 50 Hz |
| Motor Power | 180 W |
| Net Weight | <30 kg |
| Construction Material | Cold-rolled steel with anti-corrosive epoxy powder coating |
| Compatible Funnel Sizes | 125 mL, 250 mL, 500 mL, 1000 mL |
| Brand | Zhongjiao Jinyuan |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Jingrui Stainless Steel Pump |
| Pricing | Available Upon Request |
| Brand | Jingying |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | JY-S120-PJ |
| Target Materials | Au, Pt |
| Target Diameter | 57 mm |
| Control Method | Fully Automatic |
| Sample Stage Diameter | 63 mm |
| Sputtering Gases | Air and Argon |
| Chamber Material | High-Borosilicate Glass |
| Operating Vacuum Range | 3–15 Pa (1 Pa increments) |
| Sputtering Current | 3–40 mA (1 mA increments) |
| Sputtering Time | 1–999 s (1 s increments) |
| Chamber Dimensions | Ø120 × 120 mm |
| Pumping Speed | 8 m³/h (2.2 L/s) |
| Ultimate Vacuum | 5 × 10⁻² Pa |
| Power Consumption | 80 W (coater), 400 W (pump) |
| Noise Level | 56 dB(A) |
| Display | Touch-enabled IPS LCD with Chinese/English UI |
| Brand | Guangzhou Jingying |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | JY-S120A |
| Target Materials | Au, Pt, Au/Pd, Pd, Ag, Pt/Pd |
| Target Diameter | 57 mm |
| Control Mode | Fully Automatic |
| Sample Stage Diameter | 63 mm |
| Sputtering Gases | Argon (Ar) and Air |
| Operating Vacuum Range | 3–15 Pa (1 Pa step) |
| Sputtering Current | 3–40 mA (1 mA step) |
| Sputtering Time | 1–999 s (1 s step) |
| Chamber Material | Borosilicate Glass (Ø120 × 120 mm) |
| Pump Speed | 8 m³/h (2.2 L/s) |
| Ultimate Vacuum | 5 × 10⁻² Pa |
| Power Consumption | 80 W (coater), 400 W (pump) |
| Noise Level | 56 dB(A) |
| Display | Touch-enabled IPS LCD with Chinese/English UI |
| Preset Programs | 6 user-configurable protocols |
| Vacuum Gauge Type | Digital Pirani sensor |
| Current Regulation | Digital closed-loop control |
| Data Logging | Real-time I-t & P-t curves |
| Brand | Guangzhou Jingying |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TW100 |
| Price Range | USD 1,400 – 7,000 (FOB) |
| Purified Water Grade | GB/T 6682–2008 Grade II (Equivalent to ASTM D1193 Type III / ISO 3696 Class 3) |
| Feed Water | Municipal tap water (TDS ≤ 300 ppm, temp. 1–45 °C, pressure 0.1–0.5 MPa) |
| Output Flow Rate | 100 L/h |
| Conductivity | ≤ 0.2 µS/cm @ 25 °C |
| Salt Rejection Rate | ≥ 99% |
| Dimensions (W×D×H) | 470 × 390 × 860 mm |
| Weight | 50 kg |
| Power Supply | 220 V / 50 Hz, 50–100 W |
| Noise Level | ≤ 40 dB(A) |
| RO Membrane | Dow Filmtec™ FT30 certified composite polyamide membrane |
| Pre-treatment | NSF-certified integrated dual-channel injection-molded cartridge system (15"/30") |
| Storage Tank | 100 L open PE tank with triple-level float control + NSF-certified vacuum-pressure bladder tank |
| Pump | CE-certified adjustable-pressure quiet RO booster pump (rated >10,000 h MTBF) |
| Pressure Monitoring | Analog RO inlet/outlet pressure gauges |
| Safety Features | Low-water cutoff, auto-restart after power failure, full-tank shutoff, ultra-low pressure protection, auto-flush on startup |
| Brand | Jinhhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH2-Series |
| Temperature Range | 1000°C / 1200°C / 1300°C / 1600°C / 1700°C |
| Chamber Dimensions (L×W×H, mm) | 200×120×80 to 800×500×400 |
| Power Rating | 2.5 kW to 36 kW |
| Heating Element | High-Temperature Alloy Wire (Spiral Wound) |
| Insulation | Silicon Carbide or High-Alumina Lightweight Refractory Lining |
| Door Mechanism | Hinged with Spring-Loaded Sealing |
| Thermocouple Port | Rear-Mounted Type K/S/R Insertion Port |
| Compliance | Designed for GLP/GMP-aligned laboratory environments per ISO/IEC 17025 guidance |
| Brand | Jinhoo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH |
| Pricing | Available Upon Request |
| Rockwell Scales | HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK |
| Initial Test Force | 98.07 N (10 kgf) |
| Total Test Forces | 588 N (60 kgf), 980 N (100 kgf), 1471 N (150 kgf) |
| Hardness Range | HRC 20–70, HRB 25–100, HRA 70–88 |
| Indication Method | Analog Dial Gauge |
| Max Specimen Height | 170 mm |
| Dimensions (L×W×H) | 520 × 240 × 700 mm |
| Net Weight | 80 kg |
| Compliance | GB/T 230.2, JJG 112 |
| Standard Accessories | Diamond cone indenter (120° apex angle, 0.2 mm tip radius), 1.5875 mm tungsten carbide ball indenter, large flat anvil, medium flat anvil, V-anvil, certified HRC & HRB reference hardness blocks |
| Brand | Jinhoo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH |
| Pricing | Available Upon Request |
| Temperature Control Range | Ambient to 400 °C (±0.5 °C accuracy, ±0.5 °C stability) |
| Standard Weights | 0.325 kg, 1.200 kg, 2.160 kg, 3.800 kg, 5.000 kg, 10.000 kg, 21.600 kg |
| Barrel Internal Diameter | 9.55 ± 0.025 mm, Length: 160 mm (Material: Corrosion-resistant high-hardness alloy steel) |
| Die Internal Diameter | 2.095 ± 0.005 mm, Surface Roughness ≤ 0.2 µm, Height: 8.000 ± 0.025 mm (Material: Tungsten Carbide) |
| Sample Cutting Options | Manual or Motorized Automatic Cutter |
| Dimensions (W×D×H) | 420 × 250 × 630 mm |
| Net Weight | 38 kg (excluding weights) |
| Heating Power | 550 W |
| Electrical Supply | 1-phase AC 220 V, 5 A |
| Brand | Jinhoo |
|---|---|
| Origin | Shanghai, China |
| Model | JHP-9050 / JHP-9080 / JHP-9160 / JHP-9270 |
| Power Supply | 220 V, 50 Hz |
| Heating Method | Water-jacketed |
| Temperature Range | RT + 5 to 65 °C |
| Temperature Resolution | 0.1 °C |
| Ambient Operating Temperature | +5 to 35 °C |
| Chamber Volume | 50 L / 80 L / 178 L / 270 L |
| Internal Dimensions (W×D×H, mm) | 350×350×410 / 400×400×500 / 500×500×650 / 600×600×750 |
| External Dimensions (W×D×H, mm) | 500×500×700 / 550×550×800 / 650×640×950 / 750×740×1050 |
| Standard Shelving | 2 / 3 / 3 / 3 stainless steel trays |
| Timer Range | 1–9999 min |
| Input Power | 450 W / 650 W / 850 W / 1350 W |
| Output Signal | 4–20 mA analog output & RS-485 interface (optional) |
| Safety Features | Dual-limit temperature alarm system (independent over-temperature cut-off, optional), low-water-level auto-shutoff, door-open interlock halting heating and circulation |
| Brand | Jinhoo |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH-S24 |
| Price | Upon Request |
| Temperature Stability | ±0.2 °C |
| Capacity | 22 L |
| Temperature Range | RT+5 °C to 99 °C |
| External Dimensions (W×D×H) | 570×270×260 mm and 750×400×300 mm |
| Construction | Stainless Steel Interior |
| Control System | Microprocessor-Based Digital Controller with Timer Function |
| Safety Features | Over-Temperature Audible/Visual Alarm |
| Key | Brand: Jinhoo |
|---|---|
| Model | JH-YP-2 |
| Anaerobic Transition Time (Sampling Chamber) | <5 min |
| Anaerobic Transition Time (Operating Chamber) | >60 min |
| Anaerobic Environment Retention (Operating Chamber, gas flow off) | >12 h |
| Temperature Range (Culture Chamber) | RT+3°C to 50°C |
| Temperature Stability | ±0.3°C |
| Temperature Uniformity | ±1.0°C |
| Power Supply | 220 V, 50 Hz, 600 W |
| Culture Chamber Internal Dimensions | 250 × 190 × 290 mm |
| Operating Chamber Internal Dimensions | 800 × 650 × 660 mm |
| Overall Dimensions | 1260 × 730 × 1380 mm |
| Construction | Stainless Steel Body, Tempered Safety Glass Front Window |
| Gas Control | Adjustable Flow Regulators, Catalytic Oxygen Scavenger, HEPA-Filtered Inlet Gas |
| UV Sterilization | Integrated Germicidal UV Lamp |
| Safety Features | Over-Temperature Protection, Microprocessor-Based PID Temperature Controller |
| Compliance | Designed for ISO 13485-aligned lab environments, compatible with GLP documentation workflows |
| Brand | Jinhoo |
|---|---|
| Model | JWVT-3 |
| Internal Dimensions | 50 cm (W) × 40 cm (H) × 17 cm (D) |
| External Dimensions | 60 cm (W) × 50 cm (H) × 42 cm (D) |
| Chamber Material | SUS 304 stainless steel (inner & outer) |
| Max Steam Temperature | 97 °C |
| Temperature Control Resolution | 0.1 °C |
| Heating Time to 97 °C | ~45 min |
| Timer Range | 0–9999 minutes |
| Control System | PID + SSR + PWM, digital LED display |
| Temperature Sensor | PT-100 platinum RTD |
| Water Level Management | Auto-refill reservoir with dry-run protection (Teflon-coated) |
| Power Supply | 1-phase, 220 V AC |
| Compliance | MIL-STD-202F, Method 208 (Solderability Preconditioning) |
| Brand | Jinpu |
|---|---|
| Origin | Shandong, China |
| Model | GAS-10A |
| Sample Capacity | 10 gas sampling bags |
| Control Interface | LCD touch screen |
| Actuation | Solenoid-valve-based automated sequencing |
| Application Domain | Ambient air pre-concentration, VOC analysis, environmental monitoring, laboratory GC/GC-MS sample introduction |
| Brand | Jinpu |
|---|---|
| Origin | Shandong, China |
| Model | JPA-3L |
| Output Flow Rate | 2.0–3000 mL/min |
| Output Pressure | 0.4 MPa |
| Noise Level | <30 dB(A) |
| Dimensions (L×W×H) | 415 × 200 × 370 mm |
| Weight | ~22 kg |
| Power Consumption | ≤150 W |
| Input Voltage | 220 ± 22 V AC, 50 ± 0.5 Hz |
| Operating Temperature | 10–40 °C |
| Relative Humidity | ≤85% RH |
| Air Purity | Oil-free and desiccated |
| Brand | Jinpu |
|---|---|
| Origin | Shandong, China |
| Model | JPH-300E |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0–0.3 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 120 W |
| Dimensions (L×W×H) | 395 × 210 × 380 mm |
| Weight | 13 kg |
| Input Voltage | 220 V ±10%, 50/60 Hz |
| Brand | Jinpu |
|---|---|
| Model | JPN-300E |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0–0.4 MPa |
| Nitrogen Dew Point | −56 °C |
| Oxygen Impurity | ≤3 ppm |
| Power Consumption | 60 W |
| Input Voltage | AC 220 V ±10%, 50 Hz ±1% |
| Operating Temperature | 0–40 °C |
| Relative Humidity | ≤85% RH |
| Dimensions (L×W×H) | 320 × 180 × 350 mm |
| Weight | 15 kg |
| Pressure Stability | ≤±0.001 MPa |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | JJ-1 |
| Power Options | 25 W to 300 W |
| Speed Range | 0–3000 rpm (infinitely variable) |
| Timer Range | 0–120 min |
| Display | Analog (standard) |
| Compliance | CE-marked per EN 61000-6-3 & EN 61000-6-2 |
| Brand | Jinshi |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Jinshi Vap 01 Vacuum Centrifugal Concentrator |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | Ambient +5 °C to 50 °C (continuously adjustable) |
| Temperature Control Accuracy | ±0.5 °C across full range |
| Sample Processing Capacity | ≥4 L per 24 h |
| Vacuum Source Compatibility | Scroll dry pump, chemical diaphragm pump, or lyophilizer vacuum system |
| Optional Accessories | Cold trap (recommended for volumes >100 mL), heated rotor chamber, multi-port manifold interface for lyophilizer integration |
| Brand | Jintaishi |
|---|---|
| Origin | Hunan, China |
| Model | DL7MS |
| Instrument Type | Floor-Standing Centrifuge |
| Speed Range | 300–7000 rpm |
| Max RCF | 11942 × g |
| Max Capacity | 6 × 2400 mL |
| Temperature Range | −20 °C to +40 °C |
| Temp. Accuracy | ±1 °C |
| Speed Accuracy | ±10 rpm |
| Acceleration/Deceleration | 9-step programmable |
| Noise Level | ≤65 dB(A) at 1 m |
| Power Supply | AC 220 V ±10 %, 50 Hz, 32 A |
| Dimensions (W×D×H) | 870 × 950 × 1000 mm |
| Weight | 580 kg |
| Refrigerant | R404A |
| Drive Motor | Inverter-Controlled Asynchronous Motor |
| Safety Features | Door Interlock, Overspeed Detection, Imbalance Detection, Overtemperature Protection |
| Data Storage | ≥3 months of operational logs, fault records, and user activity with export capability |
| Display | 10-inch full-color capacitive touchscreen |
| Compliance | Designed for GLP-compliant workflows |
| Origin | Zhejiang, China |
|---|---|
| Manufacturer Type | Distributor |
| Product Origin | Domestic (China) |
| Model | 76-1A |
| Price | USD 280 (FOB) |
| Instrument Type | Constant-Temperature Water Bath |
| Circulation Function | Non-circulating |
| Power Supply | 220 V ±10%, 50 Hz |
| Heating Power | 1000 W |
| Stirrer Motor Power | 60 W |
| Temperature Range | Ambient to 100 °C (digital PID control) |
| Speed Control | Stepless, 0–2000 rpm |
| Glass Chamber Dimensions | Ø300 × 300 mm (ID × H) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | JJ-1 |
| Maximum Stirring Volume | 10 L |
| Speed Range | 50–1500 rpm |
| Temperature Control | Ambient Only |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Motor Type | Permanent Magnet DC Motor |
| Rated Power | 100 W |
| Clamp Shaft Diameter Compatibility | Φ3–Φ13 mm |
| Vertical Adjustment Range (Clamp to Column Center) | 160–270 mm |
| Max Height from Base to Clamp Center | 560 mm |
| Display | 4-digit LED RPM readout |
| Speed Control | Analog continuous (non-step) adjustment |
| Timer Function | 0–120 min (optional on digital variant) |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.20 |
| Ultimate Vacuum Pressure | 300 mbar (abs) |
| Maximum Flow Rate | 12 L/min |
| Motor Power | 75 W |
| Noise Level | <50 dB(A) |
| Operating Temperature Range | 7–40 °C |
| Weight | 4 kg |
| Dimensions (L×W×H) | 195 × 98 × 156 mm |
| Inlet Port Diameter | φ6 mm |
| Positive Pressure Output | 0.07 MPa (≈10 psi) |
| Diaphragm Material | Nylon |
| Housing Material | Anodized Aluminum Alloy |
| Ambient Humidity | ≤80% RH (non-condensing) |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.20 |
| Pump Type | Diaphragm Vacuum Pump |
| Oil-Free Design | Yes |
| Ultimate Vacuum | 300 mbar (abs) |
| Pumping Speed | 12 L/min |
| Motor Power | 75 W |
| Dimensions (L×W×H) | 195 × 198 × 156 mm |
| Weight | 4 kg |
| Inlet Port Diameter | Φ6 mm |
| Noise Level | <50 dB(A) |
| Operating Temperature Range | 7–40 °C |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Pump Head Material | Nylon 66 |
| Max Positive Pressure Output | 30 psi (207 kPa) |
| Motor Thermal Protection | Integrated |
| Certifications | CE-compliant design, RoHS-conformant |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GM-0.20 |
| Instrument Type | Diaphragm Pump |
| Product Type | Oil-Free Vacuum Pump |
| Ultimate Vacuum | 300 mbar (abs) |
| Pumping Speed | 12 L/min |
| Maximum Positive Pressure | 0.07 MPa (gauge) |
| Motor Power | 75 W |
| Noise Level | <50 dB(A) |
| Inlet Port Diameter | φ6 mm |
| Operating Temperature Range | 7–40 °C |
| Pump Head Material | Nylon |
| Housing Material | Aluminum Alloy with Corrosion-Resistant Coating |
| Dimensions (L×W×H) | 195 × 98 × 156 mm |
| Weight | 4 kg |
| Pump Body Operating Temperature | <55 °C |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | 50–200 mbar (depending on model) |
| Flow Rate | 20–30 L/min |
| Motor Power | Not specified |
| Dimensions (L×W×H) | 450 × 200 × 300 mm |
| Weight | 10.8 kg |
| Pressure Regulation | Adjustable vacuum/positive pressure output |
| Cooling | Integrated self-cooling exhaust system |
| Membrane Material | Fluoroelastomer (FKM) |
| Mounting | Four suction-cup feet + top carry handle |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Pump Type | Diaphragm Vacuum Pump |
| Product Type | Oil-Free Vacuum Pump |
| Ultimate Vacuum Pressure | ≤ 0.075 MPa (≤ 75 mbar) |
| Pumping Speed | 20 L/min |
| Motor Power | 160 W |
| Noise Level | < 50 dB(A) |
| Weight | 7.5 kg |
| Dimensions (L×W×H) | 215 × 120 × 235 mm |
| Inlet/Outlet Port Diameter | φ6 mm |
| Operating Temperature Range | 7–40 °C |
| Diaphragm Material | Fluoroelastomer (FKM) |
| Pump Housing | PTFE-Coated |
| Cooling | Self-Cooling Air Exhaust System |
| Pressure Regulation | Adjustable Vacuum Output |
| Compliance | Designed for GLP-compliant laboratory environments |
| Origin | Shanghai, China |
|---|---|
| Type | Oil-Free Diaphragm Vacuum Pump |
| Model | GM-0.33A |
| Ultimate Vacuum | ≤0.08 MPa (200 mbar) |
| Flow Rate | 20 L/min |
| Noise Level | <55 dB(A) |
| Motor Power | 160 W |
| Inlet/Outlet Port | Ø6 mm |
| Dimensions (L×W×H) | 235×120×215 mm |
| Weight | 7.5 kg |
| Operating Temperature Range | 7–40 °C |
| Construction | Anodized Aluminum Housing with Corrosion-Resistant Coating |
| Pressure Mode | Negative Pressure Only (Vacuum-Only Operation) |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.33A |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | 200 mbar |
| Flow Rate | 20 L/min |
| Motor Power | 60 W |
| Dimensions (L×W×H) | 235 × 120 × 215 mm |
| Weight | 7.5 kg |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Operating Temperature Range | 7–40 °C |
| Maximum Pump Surface Temperature | <60 °C |
| Noise Level | <55 dB(A) |
| Compliance | CE-marked for laboratory use under IEC 61000-6-3 & IEC 61000-6-2 |