Common Laboratory Equipment
Filter
Showing 8041–8070 of 18294 results
| Brand | Jiayuan |
|---|---|
| Origin | Beijing, China |
| Model | MINIB-100I |
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Accuracy | ≤ ±0.5°C at 100°C |
| Temperature Uniformity | ≤ ±0.3°C across block surface |
| Ramp Time | ≤15 min (20°C → 100°C) |
| Power Supply | 24 V DC |
| Max Power Consumption | 60 W |
| Weight | ≤1 kg |
| Programmable Timer | 0–999 min |
| Display Resolution | 0.1°C |
| Over-Temperature Protection | Integrated |
| Cooling Method | Passive air convection with integrated fan |
| Module Interchangeability | Yes (MINI-A through MINI-G standard configurations) |
| Brand | Jiayuan |
|---|---|
| Origin | Beijing, China |
| Model | MINIC-100I |
| Temperature Range | −10 °C to 100 °C |
| Temperature Accuracy | ≤ ±0.5 °C |
| Temperature Uniformity (at 40 °C Δ) | ±0.3 °C |
| Block Stability (at 100 °C) | ≤ ±0.5 °C |
| Display Resolution | 0.1 °C |
| Heating Time (20 °C → 100 °C) | ≤ 15 min |
| Cooling Time (RT → RT−20 °C) | ≤ 30 min |
| Max Power | 120 W |
| Weight | ≤ 1.4 kg |
| Input Voltage | 24 V DC |
| Heat Lid | Yes |
| Programmable Timer | 0–999 min |
| Replaceable Blocks | MINI-A (40×0.2 mL), MINI-B (24×0.5 mL), MINI-C (15×1.5 mL), MINI-D (15×2.0 mL), MINI-E (8–12.5×12.5 mm cuvettes), MINI-F (4×15 mL), MINI-G (2×50 mL) |
| Brand | Jiayuan |
|---|---|
| Origin | Beijing, China |
| Model | MiniP-2500 |
| Maximum Capacity | 2 × 96-well PCR plates |
| Maximum Speed | 2500 rpm |
| Relative Centrifugal Force (RCF) | 500 × g |
| Dimensions (W×D×H) | 23 × 20 × 19.3 cm |
| Weight | 3 kg |
| Power Supply | DC 24 V |
| Motor Type | Brushless DC motor |
| Acceleration Time to Max Speed | < 3 s |
| Deceleration Time from Max Speed to Stop | ≤ 10 s |
| Operating Environment | Compatible with cold room use (4–25 °C) |
| Lid Opening Angle | 95° vertical hinge |
| Brand | JIAYUAN |
|---|---|
| Origin | Beijing, China |
| Model | MIX-3000 |
| Speed Range | 300–3000 rpm (10-rpm increments) |
| Vortex Mode Speed | 3500 rpm |
| Mixing Time | 1 s – 99 h 59 min (continuous operation) |
| Orbit Diameter | 1.5 mm (standard), 3 mm (optional amplitude) |
| Display | Digital LED |
| Noise Level | <52 dB(A) |
| Dimensions (W×D×H) | 270 × 196 × 170 mm |
| Weight | 4.5 kg |
| Power Supply | AC 100–230 V, 50–60 Hz |
| Power Consumption | 45 W |
| Housing Material | High-impact polymer housing |
| Compliance | CE-marked for laboratory use |
| Brand | JIAYUAN |
|---|---|
| Origin | Beijing, China |
| Model | MK-10 |
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Accuracy | ≤ ±0.5°C |
| Temperature Uniformity (at 40°C) | ≤ ±0.3°C |
| Block Temperature Stability (at 100°C) | ≤ ±0.5°C |
| Heating Time | ≤15 min (20°C → 100°C) |
| Display Resolution | 0.1°C |
| Max Timer Setting | 99 h 59 min |
| Power Consumption | 150 W |
| Net Weight | 2.2 kg |
| Dimensions (W×D×H) | 270 × 190 × 170 mm |
| Interchangeable Block Options | A–N (including 96-well PCR plates, 0.2–50 mL tube formats, and custom blocks) |
| Brand | Jiayuan |
|---|---|
| Model | MK-10 Heated |
| Origin | Beijing, China |
| Heating Range | Room Temperature +5°C to 100°C |
| Temperature Stability @100°C | ≤±0.5°C |
| Block Uniformity | ≤±0.3°C |
| Display Resolution | 0.1°C |
| Ramp Time | ≤15 min (20°C → 100°C) |
| Max Timer Setting | 99 h 59 min |
| Power Consumption | 150 W |
| Net Weight | 2.2 kg |
| Dimensions (W×D×H) | 270 × 190 × 170 mm |
| Interchangeable Block Options | A–N (including 0.2 mL PCR plates, 0.5/1.5/2.0 mL tubes, 5/15/50 mL tubes, square wells, and custom configurations) |
| Brand | JIAYUAN |
|---|---|
| Model | MK-10 |
| Temperature Range | 0°C to 100°C |
| Temperature Accuracy | ≤ ±0.3°C |
| Heating Time | ≤12 min (from 25°C to 100°C) |
| Display Resolution | 0.1°C |
| Timer Range | 0–99 h 59 min |
| Power Consumption | 150 W |
| Net Weight | 2.2 kg |
| Dimensions (W×D×H) | 270 × 190 × 170 mm |
| Module Compatibility | Interchangeable aluminum blocks for tubes (0.2–50 mL), microplates, and custom cavities |
| Brand | JIAYUAN |
|---|---|
| Model | MK-20 |
| Type | Refrigerated Dry Block Heater (Metal Bath) |
| Temperature Range | –10°C to 100°C |
| Temperature Stability @100°C | ≤±0.5°C |
| Block Uniformity @40°C | ≤±0.3°C |
| Display Resolution | 0.1°C |
| Heating Time | ≤15 min (20°C → 100°C) |
| Cooling Time | ≤30 min (ΔT = –30°C, ambient ≤26°C) |
| Max Power | 150 W |
| Net Weight | 2.2 kg |
| Dimensions (W×D×H) | 270 × 190 × 170 mm |
| Programmable Timer | Up to 99 h 59 min |
| Module Compatibility | Interchangeable blocks for 0.2–50 mL tubes, microplates, and custom slots |
| Brand | JIAYUAN |
|---|---|
| Model | MK100-2A |
| Temperature Range | Ambient +5°C to 80°C |
| Temperature Accuracy | ≤ ±0.5°C |
| Heating Time | ≤20 min (from ambient to 80°C) |
| Timer Range | 1 min to 99 h 59 min |
| Display Resolution | 0.1°C |
| Temperature Uniformity Across Plate | ≤ ±0.5°C |
| Capacity | 2 standard microplates (e.g., 96-well, 384-well, deep-well, or cell culture plates) |
| Power Consumption | 120 W |
| Dimensions (W×D×H) | 280 × 270 × 140 mm |
| Net Weight | 4.0 kg |
| Brand | Jiayuan |
|---|---|
| Origin | Beijing, China |
| Model | MK100-4A |
| Temperature Range | Ambient +5°C to 80°C |
| Temperature Accuracy | ≤ ±0.5°C |
| Heating Time | ≤20 min (from ambient to 80°C) |
| Timer Range | 1 min to 99 h 59 min |
| Display Resolution | 0.1°C |
| Temperature Uniformity Across Plate | ≤ ±0.5°C |
| Capacity | 4 standard microplates (e.g., 96-well, 384-well, deep-well, cell culture plates) |
| Power Consumption | 120 W |
| Dimensions | 280 × 270 × 140 mm |
| Weight | 4.5 kg |
| Brand | Jiayuan |
|---|---|
| Origin | Beijing, China |
| Model | NA-300 |
| Nitrogen Purity | 99.999% (O₂ < 3 ppm, Dew Point: −56 °C) |
| Nitrogen Flow Rate | 0–300 mL/min |
| Nitrogen Pressure | 0–0.4 MPa |
| Air Flow Rate | 0–2000 mL/min |
| Air Pressure | 0–0.4 MPa |
| Noise Level | < 40 dB(A) |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Ambient Humidity | ≤85% RH |
| Dimensions (W×D×H) | 500 × 300 × 380 mm |
| Weight | 20 kg |
| Brand | Jiayuan |
|---|---|
| Origin | Beijing, China |
| Model | NG1903 |
| Nitrogen Purity | 99.999% (O₂ < 3 ppm, Dew Point: −56 °C) |
| Flow Rate | 0–300 mL/min |
| Output Pressure | 0.4 MPa |
| Pressure Stability | ±0.003 MPa |
| Power Supply | 220 V ±10%, 50 Hz |
| Power Consumption | 150 W |
| Operating Temperature | 10–40 °C |
| Relative Humidity | ≤85% RH |
| Dimensions (W×D×H) | 400 × 180 × 380 mm |
| Net Weight | 12.5 kg |
| Brand | Jiayuan |
|---|---|
| Origin | Beijing, China |
| Model | NHA-300 |
| Nitrogen Purity | ≥99.999% (O₂ < 3 ppm, Dew Point: −56 °C) |
| Nitrogen Flow Rate | 0–300 mL/min |
| Nitrogen Pressure | 0–0.4 MPa |
| Hydrogen Purity | ≥99.999% |
| Hydrogen Flow Rate | 0–300 mL/min |
| Hydrogen Pressure | 0–0.4 MPa |
| Air Flow Rate | 0–2000 mL/min |
| Air Pressure | 0–0.4 MPa |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Ambient Humidity | ≤85% RH |
| Noise Level | <40 dB(A) |
| Dimensions (W×D×H) | 500×480×360 mm |
| Weight | 40 kg |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DHG-9076A |
| Power Supply | 220 V / 50 Hz |
| Temperature Range | RT +10 °C to 250 °C |
| Temperature Uniformity | ±1 °C |
| Temperature Resolution | 0.1 °C |
| Chamber Volume | 76 L |
| Internal Dimensions (W×D×H) | 450 × 400 × 450 mm |
| External Dimensions (W×D×H) | 740 × 618 × 630 mm |
| Standard Shelving | 3 adjustable stainless steel trays |
| Timer Range | 1–9999 minutes |
| Operating Ambient Temperature | +5 to +40 °C |
| Input Power | 2050 W |
| Brand | Jiedao |
|---|---|
| Origin | Zhejiang, China |
| Model | SGH-300A, SGH-500A |
| Output Flow | 0–300 mL/min (SGH-300A), 0–500 mL/min (SGH-500A) |
| Output Pressure | 0.4 MPa (factory-set) |
| Hydrogen Purity | >99.999% |
| Max Power Consumption | 150 W |
| Dimensions (L×W×H) | 390 × 185 × 320 mm |
| Input Power | AC 220 V ±10%, 50 Hz |
| Operating Temperature | 5–40 °C |
| Relative Humidity | <85% RH (non-condensing, dust-free environment) |
| Brand | Jiedao |
|---|---|
| Origin | Zhejiang, China |
| Model | SGN-300 |
| Output Flow | 0–300 mL/min |
| Output Pressure | 0–0.4 MPa (factory-set at 0.4 MPa) |
| Nitrogen Purity | ≥99.999% |
| Dew Point | ≤−40 °C |
| Power Consumption | 150 W |
| Dimensions (L×W×H) | 390 × 185 × 320 mm |
| Weight | 10 kg |
| Input Power | AC 220 V, 50 Hz |
| Operating Temperature | 5–40 °C |
| Relative Humidity | <85% RH (non-condensing) |
| Construction | Stainless steel electrolytic cell with noble-metal catalyst layer |
| Purification Method | Integrated physical adsorption and electrochemical separation |
| Brand | Jiedao/Kexiao |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GPI Series Gas Purifier for GC Applications |
| Price | USD 135 (approx.) |
| Brand | Jiedao/Kexiao |
|---|---|
| Model | WJK-2LB, WJK-5LB |
| Output Flow | 0–2000 mL/min (WJK-2LB), 0–5000 mL/min (WJK-5LB) |
| Output Pressure | 0–0.4 MPa |
| Noise Level | ≤42 dB(A) |
| Power Consumption | ≤150 W |
| Dimensions (L×W×H) | 390 × 210 × 340 mm |
| Weight | 25 kg |
| Operating Temperature | 5–40 °C |
| Relative Humidity | <85% RH |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Brand | Jing Rong Yuan |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JRY-P10 |
| Extraction Time Range | 0–99 h |
| Oscillation Mode | Vertical |
| Simultaneous Extraction Capacity | 10 separatory funnels |
| Oscillation Amplitude | 50 mm |
| Speed Range | 0–350 rpm |
| Voltage | 220 V, 50 Hz |
| Motor Power | 180 W |
| Noise Level | <60 dB(A) |
| Compatible Funnel Sizes | 125–1000 mL |
| Housing Material | Powder-coated steel chassis |
| Brand | Jing Tuo Instrument |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | PCD-40S |
| Instrument Type | Semi-Automatic Pellet Press |
| Force Capacity | 40 Ton (392 kN) |
| Drive Method | Electric Motor with Hydraulic Amplification |
| Control Mode | Digital Panel with Preset Pressure & Hold Time |
| Brand | Jing Tuo Instrument |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | PP-20S |
| Instrument Type | Fully Automatic Pellet Press |
| Force Capacity | 20 Ton (196 kN) |
| Control System | Integrated Programmable Logic Controller (PLC) with Touchscreen HMI |
| Compression Mode | Hydraulic + Servo-Motor Assisted Dual-Drive |
| Maximum Die Cavity Diameter | 30 mm (standard) |
| Repeatability | ≤ ±0.5% of set pressure |
| Cycle Time | Adjustable from 15–60 s per pellet |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Models | DC-0515, DC-1006 |
| Temperature Range | −5 °C to 100 °C (DC-0515) |
| Internal Dimensions (W×D×H) | 250×200×200 mm (DC-0515), 300×250×200 mm (DC-1006) |
| Working Volume | 10 L (DC-0515), 15 L (DC-1006) |
| Temperature Uniformity | ≤ ±0.1 °C |
| Temperature Stability | ≤ ±0.5 °C |
| Circulation Flow Rate | ≥ 8 L/min |
| Construction | Stainless Steel Interior Tank, Powder-Coated Steel Exterior |
| Control System | Microprocessor-Based PID Controller with Digital Display |
| Heating Method | Enclosed Immersion Heater |
| Cooling Method | Integrated Refrigeration System with Internal Coiled Heat Exchanger |
| Brand | JingHong |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9023A |
| Temperature Range | RT+10°C to 200°C |
| Temperature Uniformity | ±1°C |
| Temperature Resolution | 0.1°C |
| Chamber Dimensions (W×D×H) | 300×280×275 mm |
| External Dimensions (W×D×H) | 596×500×445 mm |
| Chamber Material | Stainless Steel (SUS304) |
| Heating Method | Forced-Air Convection |
| Operating Ambient Temperature | 5–40°C |
| Instrument Type | General-Purpose Benchtop Drying Oven |
| Brand | JingHong |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9030A, DHG-9030Y |
| Temperature Range | RT+10°C to 200°C |
| Temperature Uniformity | ±1°C |
| Temperature Resolution | 0.1°C |
| Chamber Dimensions (W×D×H) | 300×300×350 mm |
| External Dimensions (W×D×H) | 440×495×620 mm |
| Chamber Material | Stainless Steel |
| Heating Method | Forced-Air Circulation |
| Operating Ambient Temperature | 5–40°C |
| Instrument Type | General-Purpose Laboratory Drying Oven |
| Brand | JingHong |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9053A |
| Temperature Range | Ambient +10°C to 200°C |
| Temperature Uniformity | ±1°C |
| Temperature Resolution | 0.1°C |
| Chamber Dimensions (W×D×H) | 420 × 350 × 350 mm |
| External Dimensions (W×D×H) | 716 × 580 × 520 mm |
| Chamber Material | Stainless Steel (SUS304) |
| Heating Method | Forced-Air Convection with Low-Noise Centrifugal Fan |
| Operating Ambient Temperature | 5–40°C |
| Instrument Type | General-Purpose Laboratory Drying Oven |
| Brand | JingHong |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9070A, DHG-9070Y |
| Temperature Range | RT +10°C to 200°C |
| Temperature Uniformity | ±1°C |
| Temperature Resolution | 0.1°C |
| Chamber Dimensions (W×D×H) | 400 × 400 × 450 mm |
| External Dimensions (W×D×H) | 565 × 630 × 805 mm |
| Chamber Material | Stainless Steel (Grade 304) |
| Heating Method | Forced-Air Circulation via Low-Noise Centrifugal Fan |
| Operating Ambient Temperature | 5–40°C |
| Instrument Type | General-Purpose Laboratory Drying Oven |
| Brand | JingHong |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9071A |
| Temperature Range | Ambient +10°C to 200°C |
| Temperature Uniformity | ±1°C |
| Temperature Resolution | 0.1°C |
| Internal Chamber Dimensions | 400 × 400 × 450 mm (W×D×H) |
| External Dimensions | 565 × 630 × 820 mm (W×D×H) |
| Chamber Material | Stainless Steel (SUS304) |
| Heating Method | Natural Convection (No Forced Air Circulation) |
| Operating Ambient Temperature | 5–40°C |
| Instrument Type | Standard Benchtop Drying Oven |
| Compliance | Designed for GLP-aligned laboratory environments |
| Brand | JingHong |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9076A, DHG-9076Y |
| Temperature Range | Ambient +10°C to 300°C |
| Temperature Uniformity | ±1°C |
| Temperature Resolution | 0.1°C |
| Chamber Dimensions (W×D×H) | 400×400×450 mm |
| External Dimensions (W×D×H) | 565×630×805 mm |
| Inner Chamber Material | Stainless Steel (SUS304) |
| Heating Method | Forced-Air Convection |
| Operating Ambient Temperature | 5–40°C |
| Instrument Type | High-Temperature Forced-Air Oven |
| Brand | JingHong |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9076A |
| Instrument Type | Precision Drying Oven |
| Temperature Range | Ambient +10°C to 300°C |
| Temperature Uniformity | ±0.1°C |
| External Dimensions | 522 × 530 × 755 mm |
| Internal Chamber Dimensions | 400 × 400 × 450 mm |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Forced-air convection with adjustable airflow |
| Power Supply | 220 V AC, 50/60 Hz |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | JingHong |
|---|---|
| Origin | Shanghai, China |
| Model | DHG-9123A, DHG-9123Y |
| Temperature Range | Ambient +10°C to 200°C |
| Temperature Uniformity | ±1°C |
| Temperature Resolution | 0.1°C |
| Chamber Dimensions (W×D×H) | 550 × 350 × 550 mm |
| External Dimensions (W×D×H) | 842 × 595 × 740 mm |
| Interior Material | Stainless Steel |
| Heating Method | Forced-Air Circulation |
| Operating Ambient Temperature | 5–40°C |
| Instrument Type | General-Purpose Laboratory Drying Oven |