Common Laboratory Equipment
Filter
Showing 13531–13560 of 17826 results
| Brand | SOPTOP |
|---|---|
| Origin | Shanghai, China |
| Model | DLX0520 Series |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Water-Cooled |
| Temperature Range | 5–40 °C |
| Temperature Stability | ±0.1 °C |
| Refrigeration Capacity | 2500 W @ 20 °C Ambient |
| Circulating Pump Max Pressure | 1.3 bar |
| Circulating Pump Flow Rate | 30 L/min |
| Bath Volume | 20 L |
| Operating Mode | Continuous |
| Display | LCD Microprocessor-Based PID Controller |
| Refrigerant | Eco-Friendly (Non-CFC/HFC-Blend) |
| Bath Opening Dimensions | 320 × 230 × 220 mm (L×W×D) |
| Net Weight | 88 kg |
| Overall Dimensions (W×D×H) | 645 × 545 × 1000 mm |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | Germany |
| Model | Legend Micro 17 / Legend Micro 17R / Legend Micro 21 / Legend Micro 21R |
| Max RCF | 17,000 × g / 21,000 × g |
| Max Speed | 13,300 rpm / 14,800 rpm |
| Capacity | 24 × 1.5 mL / 2.0 mL tubes |
| Drive System | Brushless frequency-sensing direct-drive motor |
| Temperature Range (Refrigerated models) | –9 °C to 40 °C |
| Noise Level | ≤56 dB(A) |
| Acceleration/Deceleration Time | 11–13 s |
| Safety Features | Automatic rotor recognition, lid interlock, imbalance detection, self-diagnostic system, electronic circuit protection |
| Compliance | IEC 61010-1, EN 61326-1 (EMC), FDA 21 CFR Part 11-ready software architecture |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Product Category | Imported Instrument |
| Model Numbers | 50135643, 50135648 |
| Instrument Type | Floor-Model Ultracentrifuge |
| Speed Range | Up to 150,000 rpm (Model-Dependent) |
| Maximum RCF | 1,048,000 × g |
| K-Factor Range | As low as 14–35 (Rotor-Dependent) |
| Noise Level | <45 dBA |
| Footprint | 0.53 m² (5.7 ft²) |
| Rotor Compatibility | Fixed-angle, swinging-bucket, vertical rotors |
| Tube Capacity | 0.2–30 mL |
| Sample Types | Viruses (HIV, SRSV, rotavirus), organelles (ribosomes, mitochondria, microsomes), lipoproteins, nanoparticles, nucleic acids |
| Drive System | Brushless DC motor with imbalance detection and auto-shutdown |
| Compliance | Designed for GLP/GMP environments |
| Brand | SOTAX |
|---|---|
| Origin | Switzerland |
| Model | TPW |
| Application Scope | Solid Oral Dosage Forms, Granulation Intermediates, Semi-solids (e.g., Toothpaste, Lipstick) |
| Sample Throughput | 100–200 samples per run |
| Solvent Volume Range | 20–100 mL or 50–520 mL |
| Integrated Unit Functions | Automated Weighing, High-Shear Homogenization, Filtration, Dilution, Data Logging & Storage |
| Software | DoE-Enabled Method Development Suite with Cross-Site Transfer Capability |
| Regulatory Alignment | Designed for GLP/GMP environments |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | Shanghai, China |
| Model | Sovall X4R Pro-MD |
| Configuration | Floor-standing or benchtop, refrigerated |
| Maximum RCF (fixed-angle) | >25,000 × g |
| Maximum RCF (swing-bucket) | >7,000 × g |
| Capacity | 1.6 L (4 × 400 mL) or 4 L (4 × 1000 mL) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AC-6 |
| Quotation | Upon Request |
| Chamber Volume | Not Applicable |
| Heating Power | Not Applicable |
| Wash Temperature | Not Applicable |
| Cleaning Solution Type | Not Applicable |
| External Dimensions (L×W×D) | Not Specified |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | EVW-60 / EVW-100 / High-Capacity External Washer |
| Capacity | 100–500 vials/min |
| Vial Size Range | 2–500 mL |
| Sealing Mechanism | Dual Opposing Conveyor Belt with Watertight Aluminum Cap Seal |
| Cleaning Method | Pressurized Spray (External Surface Only) |
| Compliance | Designed in Conformance with cGMP, FDA 21 CFR Part 11 (Audit Trail Ready), ISO 13485 Supportable |
| Footprint | Custom-Configurable (No Fixed Dimensions Provided) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | RW-Series (RW-250 / RW-500 / RW-800 / RW-1150) |
| Quotation | Upon Request |
| Chamber Volume | Not Applicable (Modular Conveyor-Based Design) |
| Heating Power | Not Integrated (External Rinse/Preheat Options Available) |
| Wash Temperature | Ambient to 85 °C (Configurable via External Hot Water Supply) |
| Wash Liquid Compatibility | Aqueous Detergents, Sterile Water, WFI, Purified Water |
| External Dimensions (L×W×D) | Model-Dependent (RW-250: ~1,800 × 900 × 1,200 mm |
| RW-1150 | ~3,200 × 1,300 × 1,450 mm) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FS(C) Series Sterile Filling & Stoppering System |
| Pricing | Available Upon Request |
| Chamber Volume | Not Applicable (Inline Continuous-Flow System) |
| Heating Power | Not Applicable (No Integrated Heating Element) |
| Wash Temperature | Not Applicable (Not a Washing Device) |
| Cleaning Solution Type | Not Applicable |
| External Dimensions (L×W×D) | Custom-Configurable per Line Integration |
| Origin | USA |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | Sterilization Tunnel |
| Quotation | Upon Request |
| Chamber Volume | Not Applicable |
| Heating Power | Not Specified |
| Wash Temperature | Not Applicable |
| Cleaning Solution Type | Not Applicable |
| External Dimensions (L×W×D) | Not Specified |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TL-100, TL-200, HSTL-200 |
| Capacity | Up to 500 vials/min (HSTL-200, dependent on vial geometry and tray configuration) |
| Vial Compatibility | 2–500 mL serum vials & reagent bottles |
| Control System | PLC-based menu-driven HMI with auto-configurable changeover logic |
| Nesting | Fully automatic nested tray loading |
| Dimensions (L×W×D) | Custom-engineered per integration requirements |
| Compliance | Designed in accordance with cGMP, ISO 13485-aligned architecture, FDA 21 CFR Part 11–ready data handling infrastructure |
| Brand | SP Scientific |
|---|---|
| Origin | USA |
| Model | AdVantage Plus |
| Instrument Type | Stoppering-Compatible Benchtop Freeze Dryer |
| Application | Laboratory R&D |
| Shelf Area | 0.09–0.27 m² |
| Ultimate Vacuum | < 20 mTorr |
| Condensate Capacity (24 h) | 3.5 L or 6 L |
| Condenser Temperature | –53 °C, –70 °C, or –85 °C |
| Shelf Temperature Range | –55 °C to +60 °C |
| Shelf Uniformity | ±1 °C |
| Maximum Shelf Count | 3 stainless steel shelves |
| Pressure Units Supported | mTorr, µBar, Pa |
| Programmable Cycles | Up to 16 stored protocols |
| Temperature Monitoring | 4 thermocouple inputs |
| Vial Capacity (2 mL, 14.75 mm OD × 40 mm H, partially stoppered) | up to 1,197 vials across 3 trays |
| Brand | SP Scientific |
|---|---|
| Origin | USA |
| Manufacturer | SP Scientific (integrated VirTis, FTS, Hull) |
| Type | Manifold & Shelf-Style Pilot-Scale Freeze Dryer |
| Application | Pilot Production & Process Development |
| Shelf Area | 2.13 m² |
| Ultimate Vacuum | ≤15 mTorr |
| Condenser Capacity (24 h) | 35 L |
| Condenser Temperature | −85 °C |
| Shelf Temperature Range | −55 °C to +65 °C |
| Shelf Uniformity | ±1.5 °C |
| Available Configurations | Tray-Loading or Stoppering |
| Optional Accessories | Pirani Gauge, Capacitance Manometer, Pressure Rise Test (PRT), Manifold Drying Module |
| Compliance | ISO 9001:2000 certified |
| Brand | SP Scientific |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | HULL |
| Instrument Type | Stoppering Freeze Dryer |
| Application Scope | Production-Scale |
| Shelf Area | Not Applicable (Modular System) |
| Ultimate Vacuum | ≤ 1 × 10⁻³ mbar (Typical Operating Range) |
| Condensate Capacity (24 h) | Up to 150 kg |
| Cold Trap Temperature | ≤ –85 °C |
| Footprint Dimensions | 609.6 mm × 914.4 mm (Base Frame Only |
| Brand | SP Scientific |
|---|---|
| Origin | USA |
| Model | LyoStar 4.0 |
| Instrument Type | Shelf-Type Freeze Dryer |
| Application Scale | Pilot-Scale |
| Shelf Area | 0.42 m² / 0.56 m² |
| Ultimate Vacuum | 13 µbar (10 mTorr) |
| Condensate Capacity (24 h) | 30 L |
| Cold Trap Temperature | −85 °C |
| Shelf Temperature Range | −70 °C to +60 °C |
| Dimensions (W×H×D) | 994 mm × 2137.6 mm × 1208.5 mm |
| Brand | SP Scientific |
|---|---|
| Origin | USA |
| Model | Ultra Prime 50 |
| Condenser Capacity | 50 L |
| Shelf Temperature Range | −70 °C |
| Condenser Temperature | −85 °C |
| Shelf Area | up to 2.13 m² |
| Shelf Configuration | 8–15 adjustable shelves |
| Refrigerant | Low-GWP hydrofluoroolefin (HFO) blend (GWP = 2–6) |
| Construction Material | 316L stainless steel chamber, condenser, and shelves |
| Compliance | Designed for GLP/GMP environments |
| Brand | SP Scientific |
|---|---|
| Origin | USA |
| Model | AdVantage Pro |
| Instrument Type | Stoppering-Compatible Benchtop Freeze Dryer |
| Scale | Pilot-Scale R&D |
| Shelf Area | 0.28–0.84 m² |
| Ultimate Vacuum | <20 mTorr |
| Condensate Capacity (24 h) | 35 L |
| Condenser Temperature Options | −53 °C, −70 °C, −85 °C |
| Shelf Temperature Range | −65 °C to +60 °C (±1 °C accuracy) |
| Shelf Configuration | Up to 3 stainless-steel shelves |
| Control System | Intellitronics™ microprocessor-based programmable controller with full-color LCD touchscreen interface |
| Programmable Protocols | ≥12 user-defined lyophilization cycles |
| Temperature Monitoring | 4 independent thermocouple inputs |
| Pressure Units | Selectable (mTorr, µbar, Pa) |
| Tray Rack Capacity | Up to 1197 × 2 mL vials (14.75 mm OD × 40 mm H, including stopper insertion height) |
| Optional Accessories | 4-valve manifold with quick-seal ports, automated stoppering system |
| Brand | SP Scientific |
|---|---|
| Origin | USA |
| Manufacturer | SP Scientific (integrated VirTis, FTS, and Hull brands) |
| Type | Shelf-Type Production Freeze Dryer |
| Application Scope | Pilot-Scale to Industrial Manufacturing |
| Shelf Area | Up to 22.3 m² (Tray Configuration) / Up to 38.6 m² (Stoppering Configuration) |
| Condenser Capacity | Configurable for High-Throughput Ice Load |
| Ultimate Vacuum | ≤ 0.1 mTorr (≤ 0.013 Pa) |
| Condenser Temperature | ≤ –85 °C |
| Control System | 21 CFR Part 11–Compliant PLC-Based Platform with Audit Trail |
| Compliance | ISO 9001:2000 Certified Design |
| Validation Support | IQ/OQ/PQ Documentation Available |
| Chamber Options | Rectangular or Circular Tray Chamber |
| Structural Certification | Designed for ISO Class 5–8 Cleanroom Installation |
| Brand | SP Scientific |
|---|---|
| Origin | USA |
| Model | Freezemobile |
| Type | Manifold Freeze Dryer |
| Scale | Pilot-Scale |
| Shelf Area | 0.12 m² |
| Ultimate Vacuum | < 20 Pa |
| Condensate Capacity | 4 kg/24 h |
| Condenser Temperature | < −80 °C |
| Brand | SP Scientific |
|---|---|
| Origin | USA |
| Manufacturer | SP Scientific (Virtis Division) |
| Model | LyoCapsule™ |
| Instrument Type | Manifold-Free, Chamber-Based R&D Freeze Dryer |
| Application Scale | Pilot-Process Development & Formulation Screening |
| Shelf Area | 76.1 cm² |
| Ultimate Vacuum | ≤10 mTorr |
| Condenser Capacity | 2 L/24 h |
| Condenser Temperature | −70 °C |
| Shelf Temperature Range | −55 °C to +60 °C |
| Shelf Temperature Uniformity | ±1 °C |
| Chamber Geometry | Cylindrical, Wall-Temperature-Controlled |
| Vial Capacity | 7 vials (2–20 mL) |
| Vacuum Pump | 100 L/min oil-lubricated pump with oil mist filter |
| Defrost Mode | Automatic hot-gas defrost |
| Software Platform | Lyos™ Control Software (with BE, PRCM, auto-backfill, stoppering) |
| Optional Add-on | Smart™ Auto-Process Development Software |
| Compliance | ISO 9001 certified, CE & CSA marked, designed for GLP/GMP-aligned R&D environments |
| Brand | SP Scientific |
|---|---|
| Origin | USA |
| Manufacturer | SP Scientific (integrating VirTis, FTS, and Hull) |
| Model | LyoConstellation |
| Instrument Type | Manifold-Free Shelf-Type Pilot Freeze Dryer |
| Application Scope | Pilot-Scale Production & Process Development |
| Shelf Area | 1–3 m² (10.7–32.3 ft²) |
| Ultimate Vacuum | ≤100 mTorr |
| Condensate Capacity (24 h) | 16 L/24 h |
| Cold Trap Temperature | −60 °C |
| Shelf Temperature Range | −55 °C to +65 °C (±1 °C uniformity) |
| Shelf Configuration | 6 shelves |
| Max Vial Capacity | 2640 × 2 mL vials |
| Refrigerant | Non-ozone-depleting, HFC-free formulation |
| Brand | SP Scientific |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Equipment |
| Model | Ultra & VirTual |
| Instrument Type | Stoppering (Lyophilization) System |
| Application Scope | Pilot-Scale Production |
| Shelf Area | 2.13 m² |
| Ultimate Vacuum | ≥15 mTorr |
| Condensate Capacity (24 h) | 35 L |
| Condenser Temperature | −85 °C |
| Main Unit Dimensions | Not Specified |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Domestic Origin | Yes |
| Model | SP-30 |
| Price Range | USD 28,000 – 42,500 |
| Batch Capacity | 30–1000 mL per cycle |
| Spray Freezing Temperature | ≤ −15 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum (Empty Chamber) | < 20 Pa |
| Spray Pressure Range | 2–5 bar (adjustable) |
| Compressed Air Supply | Integrated oil-free air compressor (4.2 m³/h, 0.2 kW, <50 dB(A)) |
| Drying Air Flow Rate | 0–330 m³/h (max), 686 Pa static pressure |
| Jet Cleaner (Needle Sweeper) | Pneumatically actuated, frequency adjustable (2.3 bar internal supply) |
| Total Power | 9 kW, 380 V, 50 Hz |
| Dimensions (L×W×H) | 1150 × 770 × 1350 mm |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SP-300 |
| Price Range | USD 28,000 – 42,500 |
| Processing Capacity | 30–1000 mL per batch |
| Spray Freezing Temperature | ≤ −15 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum Pressure (empty) | < 20 Pa |
| Spray Pressure Range | 2–5 bar (adjustable) |
| Compressed Air Supply | Built-in oil-free air compressor (4.2 m³/h, 0.2 kW, noise < 50 dB(A)) |
| Drying Air Flow | 0–330 m³/h, max. static pressure 686 Pa |
| Atomization Airflow | 5.5 m³/min |
| Jet Cleaner (Needle) Frequency | Variable, with integrated 2.3 bar compressed air supply |
| Power Input | 9 kW, 380 V, 50 Hz |
| Dimensions (L×W×H) | 1150 × 770 × 1350 mm |
| Control System | Full-color LCD touchscreen interface with real-time digital display of drying chamber temperature, peristaltic pump speed, fan frequency, needle purge frequency, and chamber pressure |
| Dual-mode Capability | Optional conversion to conventional hot-air spray dryer configuration |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SP-3000 |
| Price Range | USD 28,000 – 42,500 |
| Processing Capacity | 30–1000 mL/batch |
| Spray Freezing Temperature | ≤ −15 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum (Empty Chamber) | < 20 Pa |
| Spray Pressure Range | 2–5 bar (adjustable) |
| Compressed Air Supply | Integrated oil-free air compressor (0.2 kW, 4.2 m³/h) |
| Drying Air Flow Rate | 0–330 m³/h (max), 686 Pa max static pressure |
| Condenser Cooling | Built-in air-cooled hermetic compressor system |
| Control System | Full-color LCD touchscreen (bilingual: English/Chinese), real-time display of drying chamber temperature, peristaltic pump speed, fan frequency, needle purge frequency, and chamber pressure |
| Needle Purge (Jet Cleaner) | Pneumatically actuated, adjustable frequency (2.3 bar internal supply) |
| Power Supply | 9 kW, 380 V, 50 Hz |
| Dimensions (L×W×H) | 1150 × 770 × 1350 mm |
| Noise Level | < 50 dB(A) |
| Dual-Mode Capability | Optional retrofit to conventional hot-air spray dryer configuration |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | SP-3000 |
| Price Range | USD 28,000 – 42,500 |
| Processing Capacity | 30–1000 mL per batch |
| Spray Freeze Temperature | ≤ −15 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum (Empty Chamber) | < 20 Pa |
| Spray Pressure Range | 2–5 bar (adjustable) |
| Compressed Air Supply | Built-in oil-free air compressor (4.2 m³/h, 0.2 kW, < 50 dB(A)) |
| Drying Air Flow | 0–330 m³/h (max), 686 Pa (max static pressure) |
| Nebulizer (Needle Cleaner) | Pneumatically actuated, frequency-adjustable (2.3 bar internal supply) |
| Condenser Cooling | Integrated air-cooled hermetic refrigeration system |
| Control Interface | Full-color LCD touchscreen (bilingual: English/Chinese), digital display of chamber temperature, peristaltic pump speed, fan frequency, needle purge frequency, and chamber pressure |
| Power Supply | 9 kW, 380 V, 50 Hz |
| Dimensions (L×W×H) | 1150 × 770 × 1350 mm |
| Compliance | Designed for GLP-compliant laboratory environments |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | SP-300000 |
| Price Range | USD 28,000–42,500 |
| Processing Capacity | 30–1000 mL per batch |
| Spray Freeze Temperature | ≤ −15 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum Pressure (Empty Chamber) | < 20 Pa |
| Spray Pressure Range | 2–5 bar (adjustable) |
| Compressed Air Supply | Built-in oil-free air compressor (4.2 m³/h, 0.2 kW, noise < 50 dB(A)) |
| Drying Air Flow Rate | 0–330 m³/h (max), max static pressure 686 Pa |
| Jet Cleaner (Needle Probe) Frequency | Adjustable, integrated 2.3 bar air supply |
| Refrigeration System | Internal air-cooled hermetic compressor |
| Vacuum Connection | Standard ISO-KF 25/40 flange |
| Control Interface | 7-inch color LCD touchscreen, bilingual (English/Chinese), real-time display of drying chamber temperature, peristaltic pump speed, fan frequency, needle probe frequency, and chamber pressure |
| Power Supply | 9 kW, 380 V, 50 Hz |
| Dimensions (L×W×H) | 1150 × 770 × 1350 mm |
| Dual-Mode Capability | Upgradable to conventional hot-air spray dryer configuration |
| Output Flow | 0–2000 mL/min @ 0.4 MPa |
|---|---|
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Noise Level | < 35 dB(A) |
| Power Consumption | 175 W |
| Input Voltage | 220 V ±10% |
| Dimensions (W×D×H) | 420 × 260 × 350 mm |
| Net Weight | 22 kg |
| Operating Environment | 0–45 °C, RH ≤85% (non-dusty, non-corrosive atmosphere) |
| Filtration | Dual stainless steel filters + stainless steel air reservoir |
| Sealing Material | Low-sulfur silicone O-rings |
| Output Flow | 0–2000 mL/min @ 0.4 MPa |
|---|---|
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Noise Level | < 35 dB(A) |
| Power Consumption | 175 W |
| Input Voltage | 220 V ±10% |
| Dimensions (W×D×H) | 400 × 180 × 250 mm |
| Net Weight | ~15 kg |
| Operating Environment | 0–45 °C, RH ≤85% (non-condensing, dust-free, non-corrosive atmosphere) |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | UXS |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | 166Q |
| Automation Level | Fully Automatic |
| Channel Configuration | Multi-Channel |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control Range | 0.001–80 mL/min |
| Eluent Solvent Options | Single Solvent System |
| Sample Throughput | 6 Samples Simultaneously, Up to 72 Sequential Samples |
| Sample Loading Volume | Unlimited |
| Wetted Materials | Stainless Steel (316), Polytetrafluoroethylene (PTFE), Borosilicate Glass |