Common Laboratory Equipment
Filter
Showing 13441–13470 of 17832 results
| Brand | Sineo |
|---|---|
| Origin | Shandong, China |
| Model | SH60A |
| Instrument Type | Graphite Block Digestion System |
| Automation Level | Fully Automated |
| Digestion Positions | 2 × 30 positions |
| Temperature Range | Ambient +5°C to 240°C |
| Temperature Control Accuracy | ±0.1°C |
| Heating Principle | Cavity-type Heated Graphite Module |
| Reagent Channels | 10 independent PTFE-lined channels |
| Power Supply | 220 V AC / 50 Hz |
| Rated Power | 3 kW |
| Digestion Vessel Capacity | 50 mL |
| Dimensions (W×D×H) | 860 × 610 × 520 mm |
| Weight | Not specified |
| Sample Handling | X-Y robotic arm with auto-pipetting, lift-and-shake mixing, real-time liquid-level sensing, endpoint color detection, and post-digestion cooling/定容 (volumetric completion) |
| Brand | Sineo |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Electric Heating Digestion System |
| Automation Level | Fully Automatic |
| Digestion Capacity | 2 × 30 positions |
| Temperature Range | Ambient to 240 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Heating Principle | Graphite Block Resistive Heating |
| Reagent Channels | 10 PTFE-lined reagent lines |
| Power Supply | 220 V AC / 50 Hz |
| Rated Power | 3 kW |
| Dimensions (W×D×H) | 860 × 610 × 520 mm |
| Weight | Not specified |
| Sample Vessel Volume | 50 mL |
| Liquid Dispensing Accuracy | <1% error (at 50 mL) |
| Dispensing Speed | ≥2 mL/s |
| Inter-hole Temperature Uniformity | ≤±1 °C |
| Brand | Sineo |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SPE100 / SPE200 / SPE400 |
| Automation Level | Fully Automated |
| Channel Count | 1 / 2 / 4 Independent Channels |
| Extraction Mode | Cartridge-Based (Column) SPE |
| Flow Rate Control | 0.1–120 mL/min |
| Solvent Capacity | 8 Solvent Types, Each in 500 mL Independent Bottles |
| Sample Loading Volume | 0.1 mL – 20 L |
| Column Compatibility | 1 mL, 3 mL, 6 mL, 12 mL Standard SPE Cartridges |
| Sealing Technology | Patented Pan-Seal Cap Coupling with H-Axis Compression |
| Pressure Range | 0–145 psi (with Adjustable Pressure Threshold & Overpressure Alarm) |
| Mechanical Arm | X/Y/Z/H Four-Axis Robotic Arm (Positioning Accuracy: ±0.01 mm |
| Sample Needle | 316L Stainless Steel with Liquid-Level Tracking & Puncture Sampling |
| Integrated Functions | On-line Drying (N₂ Blow-Down + Anhydrous Na₂SO₄), On-line Concentration (N₂-Assisted), Waste Segregation (3-Channel Effluent Routing), Multi-Mode Needle Cleaning (N₂ Purge, Solvent Rinse, Agitated Rinse) |
| Software | Cloud-Enabled Platform with Remote Monitoring, Scheduled Run Initiation, Audit Trail, Parameter Validation & GLP-Compliant Logging |
| Power Supply | AC 220 V / 110 V ±10%, 50–60 Hz |
| Operating Environment | 0–40 °C, 10–85% RH |
| Dimensions (Main Unit) | 680 × 580 × 670 mm (H×W×D) |
| Brand | Sineo |
|---|---|
| Origin | Shandong, China |
| Model | SPE100 / SPE200 / SPE400 |
| Automation Level | Fully Automated |
| Channel Configuration | Modular — 1/2/4/6/8 independent channels |
| Extraction Method | Column-based SPE |
| Flow Rate Control | 0.1–120 mL/min |
| Solvent Capacity | 8 solvent types, each in 500 mL independent bottles |
| Sample Capacity | 52-position rack |
| Sample Loading Volume | 0.1 mL to 20 L |
| Wetted Materials | 316 stainless steel, PTFE, PFA |
| Sealing Technology | Independent cap with spring-energized PTFE (Quad-Ring) seal and H-axis compression |
| Mechanical Arm | X/Y/Z/H four-axis robotic arm (positioning accuracy: ±0.01 mm |
| Pressure Range | 0–145 psi (1.0 MPa max) |
| Online Functions | Integrated nitrogen purge drying, anhydrous Na₂SO₄ dehydration module, in-situ nitrogen blow-down concentration |
| Sample Needle | 316L stainless steel, side-bottom piercing design with liquid-level tracking |
| Waste Management | 3-channel segregated waste collection |
| Compliance | Designed for GLP-compliant workflows |
| Brand | Sineo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Regional Classification | Domestic (China) |
| Model | TANK |
| Price Range | USD 35,000 – 42,000 |
| Cavity Class | Industrial-Grade |
| Sample Capacity | 40 Positions |
| Microwave Source | 2450 MHz, Dual Magnetron, Non-Pulsed Frequency-Variable Control |
| Max Temperature | 300 °C |
| Temp Measurement Accuracy | ±0.1 °C |
| Temp Control Stability | ±1 °C |
| Max Pressure | 15 MPa |
| Brand | Sineo |
|---|---|
| Origin | Shandong, China |
| Model | TANK |
| Cavity Class | Industrial-grade |
| Sample Capacity | 12–40 positions |
| Microwave Source | 2450 MHz, dual magnetron, non-pulsed frequency-variable control |
| Max Temperature | 300 °C |
| Temp Measurement Accuracy | ±0.1 °C |
| Temp Control Stability | ±1 °C |
| Max Pressure | 15 MPa |
| Cavity Material | 316L stainless steel with multi-layer PTFE coating |
| Outer Vessel Material | Aerospace-grade composite fiber with PTFE coating (burst pressure: 70 MPa |
| max temp | 600 °C) |
| Cooling Time to Ambient | <15 min |
| Dimensions (W×D×H) | 570 × 650 × 680 mm |
| Net Weight | 65 kg |
| Power Supply | 220–240 VAC, 50/60 Hz, 16 A |
| Operating Environment | 0–40 °C, 15–80% RH |
| Brand | Sineo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-made) |
| Model | TANK eco |
| Price | Upon Request |
| Cavity Grade | Industrial-Grade |
| Sample Capacity | 6/8/10 positions |
| Max Temperature | 300 °C |
| Max Pressure | 15 MPa (≈2200 psi) |
| Power Supply | 220–240 VAC, 50/60 Hz, 20 A |
| Microwave Frequency | 2450 MHz, Variable-Frequency Magnetron |
| Installed Power | 1800 W |
| Cavity Material | 316L Stainless Steel with Multi-Layer PTFE Coating |
| Safety Door | Pop-Out Buffer Anti-Explosion Design with Dual Lock & Self-Check |
| Pressure Sensor | High-Precision Corrosion-Resistant Semiconductor Sensor |
| Temperature Monitoring | Mid-Infrared Full-Cavity Temperature Measurement |
| Control Interface | 7-inch LCD Touchscreen |
| Operating System | Android-based |
| Data Storage | 8 GB Onboard + Cloud Integration (Secure, Encrypted) |
| Compliance | FDA 21 CFR Part 11 (Audit Trail, Electronic Signatures, Role-Based Access) |
| Cooling System | High-Flow Corrosion-Resistant Fan, Auto-Adjustable Airflow, <15 min to Ambient |
| Dimensions (W×D×H) | 480 × 560 × 575 mm |
| Net Weight | 45 kg |
| Rotor Design | Independent Frame-Type High-Pressure Vessels |
| Vessel Options | Self-Venting or Non-Venting Configurations |
| Inner Vessel Material | TFM (Perfluoroalkoxy Alkane) |
| Inner Vessel Volume | 100 mL |
| Outer Vessel Material | Aerospace-Grade Composite Fiber with Full PTFE Coating |
| Design Temp/Pressure | 300 °C / 15 MPa |
| Additional Functions | Microwave-Assisted Extraction (MAE), Microwave Synthesis (Organic & Inorganic) |
| Brand | Sineo |
|---|---|
| Origin | Shandong, China |
| Model | TANK eco |
| Cavity Class | Industrial-grade |
| Sample Capacity | 6/8/10 positions |
| Microwave Source | Frequency-variable magnetron with high-energy microwave field emission |
| Max Temperature | 300 °C |
| Max Pressure | 15 MPa (≈2200 psi) |
| Power Supply | 220–240 VAC, 50/60 Hz, 20 A |
| Microwave Frequency | 2450 MHz |
| Installed Power | 1800 W |
| Max Microwave Output | 1000 W |
| Cavity Volume | 31.6 L |
| Cavity Material | 316 stainless steel with multi-layer PTFE coating |
| Safety Door | Auto-ejecting explosion-proof sliding door with anti-leakage interlock |
| Cooling | High-flow corrosion-resistant turbo fan |
| Dimensions (W×D×H) | 480 × 560 × 575 mm |
| Net Weight | 45 kg |
| Pressure Control Range | 0–15 MPa, accuracy ±0.01 MPa |
| Temperature Control Range | 0–305 °C (IR), or –40–305 °C (fiber-optic), accuracy ±0.1 °C |
| Safety Systems | COT real-time anomaly monitoring, directional safety bolt pressure relief, full-cavity pressure monitoring, microwave cutoff on fault detection |
| Software | Android-based OS |
| Brand | Sineo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | TANK MAX |
| Quotation | Upon Request |
| Cavity Class | Industrial-Grade |
| Microwave Source | 2450 MHz Frequency-Modulated Magnetron with Continuous Non-Pulsed High-Energy Microwave Emission |
| Max Operating Temperature | 300 °C |
| Max Operating Pressure | 20 MPa |
| Brand | Sineo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | TANK MAX |
| Microwave Source | 2450 MHz frequency-variable magnetron with non-pulsed continuous-wave high-energy microwave emission |
| Max Operating Temperature | 300 °C |
| Max Operating Pressure | 20 MPa |
| Power Output | 1500 W |
| Cooling System | Circulating water cooling (5–40 °C) |
| Control System | Embedded Android OS with graphical user interface |
| Sample Vessel Capacity Options | 6, 10, 18, 24, and 28 positions |
| Vessel Materials | PTFE-TFM, high-purity quartz, borosilicate glass |
| Input Voltage | 220–240 VAC, 50/60 Hz, 20 A |
| Ambient Operating Temperature | 0–40 °C |
| Relative Humidity Range | 15–80 % RH |
| Brand | Sineo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Models | TK 12 / TK 16 / TK 20 / TK 24 / TK 24D / VAVO 28 / VAVO 40 / TK 40 |
| Heating Power | 3200 W (max) |
| Max Operating Temperature | 250 °C |
| Temperature Uniformity | ±1 °C |
| Brand | Sineo |
|---|---|
| Origin | Shandong, China |
| Model Range | TK-12 / TK-16 / TK-20 / TK-24 / TK-24D / VAVO-28 / VAVO-40 / TK-40 |
| Heating Principle | Cast-Aluminum Block with Deep-Well Design |
| Max Temperature | 240 °C (TK series) / 250 °C (VAVO series) |
| Temperature Accuracy | ±1 °C |
| Heating Uniformity | Optimized via High-Thermal-Conductivity Cast-Aluminum Block |
| Control System | Embedded PID Algorithm with Real-Time Thermal Monitoring |
| Safety Features | Over-Temperature, Over-Current, Over-Pressure, and Heating Element Fault Detection |
| Surface Finish | PTFE-Coated for HNO₃, HF, HCl, and Aqua Regia Resistance |
| Application Mode | Atmospheric-Pressure Wet Digestion & Post-Microwave Acid Evaporation |
| Compliance | Designed to support EPA Methods 3050B, 3051A, 3052 |
| Brand | Sineo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | UWave-2000 |
| Temperature Range | 0–300 °C (atmospheric), 0–230 °C (pressurized) |
| Pressure Range | 0–2 MPa (rated), 0–5 MPa (sensing) |
| Microwave Power Output | 0–1000 W (PID-controlled, continuous non-pulsed) |
| Magnetron Frequency | 2450 MHz |
| Ultrasonic Power | 0–800 W |
| Ultrasonic Frequency | 28 kHz (auto-sweep & frequency-locking) |
| UV Source | LED, 0–100 W adjustable, peak wavelength 365 nm |
| Reaction Volume | up to 2000 mL (atmospheric), up to 500 mL (pressurized) |
| Safety Overpressure Release | Intelligent pressure control with real-time monitoring and automatic venting |
| External Vessel Material | Aerospace-grade carbon-fiber composite (Xtra Fiber™) with full PFA coating, burst strength ≥70 MPa, thermal resistance up to 600 °C |
| Cavity | 316L stainless steel with multi-layer PFA anti-corrosion coating |
| Cooling | 3-speed variable fan, 3 m³/min airflow |
| Control Interface | 7-inch color touchscreen (Windows-based OS), USB connectivity, remote PC control supported |
| Video Monitoring | Integrated HD color imaging system with real-time display and recording capability |
| Stirring Options | Digital constant-speed mechanical stirrer (30–1600 rpm, bidirectional, torque 300 N·m) + magnetic stirrer (0–800 rpm) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | WEIYEE |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | P-1 |
| Rotational Speed | 1400 rpm |
| Polishing Disk Diameter | 203 mm (8") |
| Number of Disks | 1 |
| Power Supply | AC 220 V, 50 Hz |
| Brand | WEIYEE |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | M-1 |
| Rotational Speed | 450 rpm |
| Grinding Plate Diameter | 203 mm |
| Number of Grinding Plates | 1 |
| Brand | CNI (Zhongjiao Jinyuan) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Single-Water-Bath Electrolytic Cell |
| Pricing | Available Upon Request |
| Volume Options | 30 mL, 50 mL, 100 mL, 150 mL |
| Temperature Control | External Water Bath Integration |
| System Sealing | Hermetic Glass Joint Assembly |
| Electrodes | Not Included (Electrode Selection Compatible with Standard 10/32 or M6 Threaded Ports) |
| Brand | Sirius |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | Sirius Automation |
| Pricing | Available Upon Request |
| Brand | SITA |
|---|---|
| Origin | Germany |
| Model | ConSpector |
| Excitation Wavelength | 365 nm (max. 150 mW, adjustable) |
| Emission Detection Wavelength | 465 nm |
| Power Supply | Internal Li-ion battery (1950 mAh, 3.6 V) |
| Power Consumption | ~2.5 W |
| Operating Temperature | 10–50 °C |
| Storage Temperature | −20–60 °C |
| Relative Humidity Limit | <70 % RH |
| Atmospheric Pressure Range | 300–1060 hPa |
| Display | Backlit LCD, 128 × 64 pixels |
| Memory Capacity | 255 user-defined fluid profiles |
| Measurement Modes | ContLevel (contamination index), Fluorescence (relative fluorescence intensity) |
| Brand | ZXYIQI |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PSK-6 |
| Price | USD 5,900 (FOB Jiangsu) |
| Vessel Capacity per Position | 0.05–25 mL |
| Construction Material | 304/316L/310S/904L Stainless Steel, Hastelloy, Titanium |
| Max Operating Pressure | 30 MPa |
| Min Operating Pressure | –0.1 MPa (Vacuum Capable) |
| Temperature Range | 0–500 °C |
| Heating Method | Embedded Modular Heater with PID Dual-Channel Temperature Control |
| Stirring Mechanism | Rare-Earth Permanent Magnet Coupling + Brushless DC Motor |
| Stirring Speed | 0–1000 rpm |
| Sealing System | Dual-Seal (Soft PTFE + Hard Alloy Face Seal) |
| Safety Features | Burst Disc (Hastelloy), Over-Temperature/Over-Pressure Auto-Alarm & Relief, Timed Shutdown |
| Vacuum Level | ≤10⁻¹ Pa (with external vacuum pump) |
| Compliance | Meets ISO 14001 design principles |
| Power Supply | 220 V AC / 50 Hz (110 V option available) |
| Brand | KJ Group (Shenyang Kejing) |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Six-Source Organic-Inorganic Co-Evaporation Deposition System |
| Pricing | Available Upon Request |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SK-12-16 |
| Rated Temperature | 1600 °C |
| Internal Chamber Dimensions | 400 × 200 × 160 mm (W × D × H) |
| Voltage/Power | 220 V / 4 kW |
| Heating Element | Silicon Carbide (SiC) Rods |
| Construction | Welded Mild Steel Cabinet with Electrostatic Powder Coating |
| Insulation | Multi-Layer Refractory Fiber + High-Density Firebrick Lining |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | SK-2-13 |
| Rated Temperature | 1300 °C |
| Heating Element | Silicon Carbide (SiC) Rod |
| Power Supply | 220 V AC, 2000 W |
| Chamber Dimensions | Ø30 mm × 180 mm (cylindrical) |
| Compliance | Meets GB/T 10066.1–2004 (General Requirements for Industrial Resistance Furnaces), ISO 9001–certified supply chain |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | SK-2.5-13 |
| Rated Temperature | 1300 °C |
| Input Voltage | 220 V AC |
| Power Rating | 2500 W |
| Chamber Configuration | Dual Vertical Tubular Zones (2 × φ22 mm × 180 mm) |
| Compliance | Designed for ASTM E1111, ISO 7888, and GLP-aligned thermal processing workflows |
| Frequency | 35 kHz & 53 kHz |
|---|---|
| Power Output | 100 W (40–100% adjustable in 1% increments) |
| Heating Power | 75 W |
| Temperature Range | 20–60 °C |
| Tank Capacity | 3 L |
| Internal Dimensions | 24 × 14 × 10 cm |
| External Dimensions | 27 × 16 × 24 cm |
| Digital Timer | 1–199 min |
| Power Supply | 220 V / 50 Hz |
| Display | Backlit LCD with on-screen menu navigation |
| Standard Accessories | Stainless Steel Rack & Sound-Dampening Lid |
| Safety Features | Dry-run detection with audible/visual alarm |
| Memory Function | Power-off parameter retention |
| Brand | Skalar |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SP2000-Sample Emulsification |
| Price Range | USD 70,000 – 112,000 |
| Brand | KJ Group (Shenyang Kejing) |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SKCH-1(A) |
| Quotation | Upon Request |
| Measuring Range | 0–12.7 mm |
| Resolution | 0.001 mm |
| Base Material | Grade "00" Granite Platform |
| Dial Indicator Accuracy Class | Grade 1 |
| Dimensions (L×W×H) | 200 mm × 150 mm × 320 mm |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Classification | Domestic (China) |
| Model | SL-2 |
| Pricing | Available Upon Request |
| Temperature Range | 0–10 °C |
| Interior Volume | 800 L |
| Interior Dimensions (W×D×H) | 760 × 660 × 1700 mm |
| Exterior Dimensions (W×D×H) | 870 × 770 × 1950 mm |
| Shelf Size | 550 × 350 mm |
| Construction | Stainless Steel Interior |
| Door | Dual-pane Transparent Glass with Lock |
| Cooling System | Imported Hermetic Refrigeration Unit |
| Safety Features | Over-temperature & Differential-Temperature Alarm, Automatic Low-Temperature Cut-off |
| Optional | RS-232 Serial Interface, UV Germicidal Lamp, Internal Power Outlets, Adjustable Load-Bearing Shelves, Two Chromatography Column Mounting Rods, LED Interior Lighting, Casters for Mobility |
| Rated Pressure | 80 kN |
|---|---|
| Working Platform Diameter | φ82 mm |
| Top–Bottom Platform Travel | 0–80 mm |
| Maximum Stroke | 40 mm |
| Column Spacing | 115 mm |
| Dimensions (L×W×H) | 340 × 225 × 330 mm |
| Net Weight | 30 kg |
| Power | 500 W |
| Supply Voltage | AC 220 V, 50/60 Hz |
| Brand | Shengli |
|---|---|
| Origin | Shanghai, China |
| Model | SL301 |
| Motor Speed | 910 rpm (optional dual-speed 910/1400 rpm or stepless variable speed) |
| Feed Size | <5 mm |
| Output Particle Size | 200–400 mesh |
| Drive Type | Electric motor-driven (not manual — corrected per technical consistency) |
| Dimensions (L×W×H) | 750 mm × 550 mm × 940 mm |
| Net Weight | 210 kg |
| Power Rating | 1.3 kW |
| Voltage | AC 380 V |
| Enclosure | Fully sealed, dust-tight design |
| Grinding Tools | Tungsten carbide, chrome steel, tungsten carbide-coated, high-manganese steel, corundum |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | SM-15M-2 |
| Travel Range | 20 mm (full rotation) |
| Fine Adjustment Increment | 10 µm per click |
| Coarse Adjustment | 500 µm per full turn of knob |
| Dimensions | 81 × 38 × 39 mm (W × D × H) |
| Weight | 520 g |