Common Laboratory Equipment
Filter
Showing 13621–13650 of 17816 results
| Brand | SSI |
|---|---|
| Model | Series II |
| Flow Range | 0.001–5 mL/min, 0.01–10 mL/min, or 0.1–40 mL/min |
| Maximum Pressure | 6000 psi (316 stainless steel), 5000 psi (PEEK), 1500 psi (low-pressure configuration) |
| Accuracy | ±2% |
| Flow Precision | ≤0.2% RSD |
| Pulse Damping | Integrated low-dead-volume pulsation damper |
| Auto-Cleaning System | On-column solvent-driven self-cleaning module with weekly aqueous solution refresh |
| Seal Replacement | Tool-free, <5-minute procedure |
| Flow Path Materials | Selectable 316 stainless steel or PEEK (biocompatible) |
| Remote Control Interface | Analog voltage input, frequency input, RS232 serial communication |
| Dimensions | 140 H × 254 W × 432 D mm |
| Weight | 11 kg |
| Power Supply | 115 V / 230 V, 50 / 60 Hz |
| Brand | SSI |
|---|---|
| Model | Series II |
| Flow Range | 0.001–5 mL/min, 0.01–10 mL/min, or 0.1–40 mL/min |
| Maximum Pressure | 6000 psi (316 SS), 5000 psi (PEEK), 1500 psi (low-pressure configuration) |
| Flow Accuracy | ±2% |
| Flow Precision | ≤0.2% RSD |
| Pulse Damping | Integrated low-dead-volume pulsation damper |
| Auto-Cleaning System | On-line solvent-driven seal flush with weekly reservoir refill |
| Seal Replacement | Tool-free, completed in <5 minutes |
| Fluidic Path Materials | Selectable 316 stainless steel or PEEK (biocompatible) |
| Remote Interface | RS232 serial communication, analog voltage/frequency input |
| Dimensions | 140 H × 254 W × 432 D mm |
| Weight | 11 kg |
| Power | 115/230 V, 50/60 Hz |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | III |
| Flow Rate | 0.01–10 mL/min |
| Maximum Pressure | 6000 psi (stainless steel pump head) |
| Accuracy | ±2% |
| Flow Precision | 0.2% RSD |
| Display | LED (real-time flow & pressure) |
| Pressure Sensor | Integrated |
| Pulse Damping | Miniature diaphragm-type damper |
| Priming Mechanism | Internal high-speed cam-driven suction |
| Self-Cleaning | On-line pump head flush function |
| Control Interface | Five-button front panel (flow setpoint, pressure limits, start/stop, rapid flush, mode selection) |
| Remote Control | RS232 serial communication, frequency input, 0–5 V analog input |
| Wetted Materials | PEEK or 316L stainless steel |
| Dimensions | 140 H × 254 W × 432 D mm |
| Weight | 11 kg |
| Power Supply | 115 V / 230 V, 50 / 60 Hz |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Model | Series III |
| Flow Rate | 0.001–40 mL/min (selectable ranges) |
| Maximum Pressure | 6000 psi (stainless steel), 5000 psi (PEEK), 1500 psi (low-pressure configuration) |
| Accuracy | ±2% |
| Flow Precision | 0.2% RSD |
| Display | LED (flow rate and pressure, high/low pressure limits) |
| Pulse Damping | Integrated diaphragm-type pulsation dampener |
| Priming | Internal fast-fill cam mechanism |
| Control | Digital logic circuitry with stepper motor drive |
| Pressure Sensing | Built-in transducer |
| Self-Cleaning | On-line pump head auto-flush function |
| Remote Interface | RS232, frequency input, analog voltage input |
| Wetted Materials | PEEK or 316L stainless steel |
| Dimensions | 140 H × 254 W × 432 D mm |
| Weight | 11 kg |
| Power Supply | 115 V / 230 V, 50 / 60 Hz |
| Brand | SSI |
|---|---|
| Model | Series III |
| Origin | Imported |
| Flow Rate | 0.01–10 mL/min |
| Maximum Pressure | 6000 psi (stainless steel pump head) |
| Accuracy | ±2% |
| Flow Precision | 0.2% RSD |
| Display | LED showing real-time flow rate and pressure |
| Pressure Monitoring | Built-in pressure sensor with high/low limit setting |
| Pulse Damping | Integrated low-volume diaphragm pulse damper |
| Priming | Internal fast-fill cam mechanism |
| Self-Cleaning | On-line pump head auto-flush function |
| Control Interface | Five dedicated front-panel keys for flow/pressure limit setup, start/stop, rapid flush, and mode selection |
| Connectivity | RS232 digital interface, analog voltage/frequency input |
| Wetted Materials | PEEK or 316L stainless steel |
| Dimensions | 140 H × 254 W × 432 D mm |
| Weight | 11 kg |
| Power Supply | 115 V / 230 V, 50 / 60 Hz |
| Brand | SSI |
|---|---|
| Model | Series III |
| Flow Rate | 0.001–40 mL/min (selectable ranges) |
| Maximum Pressure | 6000 psi (stainless steel), 5000 psi (PEEK), 1500 psi (low-pressure configuration) |
| Accuracy | ±2% |
| Flow Precision | ≤0.2% RSD |
| Display | LED showing real-time flow rate and pressure |
| Pressure Sensor | Integrated |
| Pulse Damping | Low-volume diaphragm-type damper |
| Priming | Internal fast-fill cam mechanism |
| Self-Cleaning | On-line pump head flush function |
| Control Interface | Front-panel membrane keys (flow setpoint, pressure limits, start/stop, quick rinse, mode selection) |
| Remote Control | RS232 digital interface, analog voltage input (0–5 V or 0–10 V), frequency input |
| Wetted Materials | PEEK or 316L stainless steel |
| Dimensions | 140 H × 254 W × 432 D mm |
| Weight | 11 kg |
| Power Supply | 115 V / 230 V AC, 50 / 60 Hz |
| Brand | SSI |
|---|---|
| Model | Series III |
| Flow Range Options | 0.001–5 mL/min, 0.01–10 mL/min, 0.1–40 mL/min |
| Maximum Pressure | 6000 psi (stainless steel head), 5000 psi (PEEK head), 1500 psi (low-pressure configuration) |
| Flow Accuracy | ±2% |
| Flow Precision | ≤0.2% RSD |
| Pressure Monitoring | Integrated pressure sensor with LED display |
| Pulse Damping | Miniature diaphragm-type damper |
| Priming Mechanism | Internal high-speed cam-driven suction |
| Drive System | Stepper motor with digital logic control |
| User Interface | Five-function keypad (flow setpoint, pressure limits, start/stop, quick flush, mode selection) |
| Self-Cleaning Capability | On-line pump head flushing |
| Remote Control | Frequency input, analog voltage input, RS-232 serial communication |
| Wetted Materials | PEEK or 316L stainless steel |
| Dimensions | 140 H × 254 W × 432 D mm |
| Weight | 11 kg |
| Power Supply | 115 V / 230 V AC, 50 / 60 Hz |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Key | Brand: SSI |
|---|---|
| Model | Series III |
| Flow Rate | 0.1–40 mL/min |
| Maximum Pressure | 1500 psi |
| Accuracy | ±2% |
| Flow Precision | 0.2% RSD |
| Display | LED (flow rate & pressure) |
| Pressure Sensor | Built-in |
| Pulse Damping | Diaphragm-type low-volume damper |
| Self-Cleaning | On-line pump head flush |
| Control Interface | Keypad + RS232 |
| Remote Input | Frequency & voltage analog signals |
| Wetted Materials | PEEK or 316L stainless steel |
| Dimensions | 140 H × 254 W × 432 D mm |
| Weight | 11 kg |
| Power | 115/230 V, 50/60 Hz |
| Brand | SSI |
|---|---|
| Model | Series III |
| Flow Rate | 0.1–40 mL/min |
| Maximum Pressure | 1500 psi |
| Accuracy | ±2% |
| Flow Precision | 0.2% RSD |
| Pressure Monitoring | Integrated Sensor with LED Display |
| Pulse Damping | Miniature Diaphragm-Type |
| Self-Cleaning Pump Head | Onboard Actuation |
| Control Interface | Digital Logic Circuit + Stepper Motor |
| Remote Inputs | Frequency & Voltage Analog, RS232 Serial |
| Wetted Materials | PEEK or 316L Stainless Steel |
| Dimensions | 140 H × 254 W × 432 D mm |
| Weight | 11 kg |
| Power | 115/230 V, 50/60 Hz |
| Brand | SSI |
|---|---|
| Model | Series III |
| Flow Rate | 0.001–5 mL/min (standard range) |
| Maximum Pressure | 6000 psi (stainless steel pump head) |
| Accuracy | ±2% |
| Flow Precision | ≤0.2% RSD |
| Pressure Monitoring | Integrated digital pressure sensor with LED display |
| Pulse Damping | Low-volume diaphragm-type damper |
| Priming Mechanism | Internal fast-fill cam |
| Self-Cleaning | On-line pump head flush function |
| Control Interface | Front-panel keypad (5 dedicated function keys) + RS232 digital communication |
| Remote Input | Frequency and analog voltage input |
| Wetted Materials | PEEK or 316L stainless steel |
| Dimensions | 140 H × 254 W × 432 D mm |
| Weight | 11 kg |
| Power Supply | 115/230 V, 50/60 Hz |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Model | SFC-24 |
| Max Flow Rate | 24 mL/min |
| Max Pressure | 10,000 psi |
| Pressure Accuracy | ±2% of full scale |
| Flow Accuracy | ±5% (gas-volume-based liquid flow calculation) |
| Cooling | Integrated Peltier thermoelectric module |
| Construction | Aluminum pump head, stainless steel fluid path |
| Control Interface | Front-panel keypad with LED display, RS-232 remote control |
| Dimensions | 146 H × 283 W × 537 D mm |
| Weight | 16 kg |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Model | SFC-24 |
| Flow Rate | 0.01–24 mL/min |
| Maximum Pressure | 10,000 psi |
| Pressure Accuracy | ±2% of full scale |
| Flow Accuracy | ±5% (gas-volume-based liquid flow calculation) |
| Cooling System | Integrated Peltier thermoelectric module |
| Pump Head Material | Aluminum |
| Fluid Path | Stainless steel |
| Pressure Sensing | Built-in electronic transducer |
| Control Interface | Front-panel keypad with LED display |
| Communication | RS-232 |
| Dimensions (H×W×D) | 146 × 283 × 537 mm |
| Weight | 16 kg |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Model | SFC-24 |
| Maximum Flow Rate | 0.01–24.0 mL/min |
| Maximum Pressure | 10,000 psi |
| Pressure Accuracy | ±2% of full scale |
| Flow Accuracy | ±5% (gas-volume-based liquid flow calculation) |
| Cooling System | Integrated Peltier thermoelectric module |
| Pump Head Material | Aluminum |
| Fluid Path | Stainless steel |
| Pressure Sensing | Built-in electronic transducer |
| Control Interface | Front-panel keypad with LED display |
| Communication | RS-232 |
| Dimensions (H×W×D) | 146 × 283 × 537 mm |
| Weight | 16 kg |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Model | SFC-24 |
| Max Flow Rate | 24 mL/min |
| Max Pressure | 10,000 psi |
| Pressure Accuracy | ±2% of full scale |
| Flow Accuracy | ±5% (gas-volume-based liquid flow calculation) |
| Cooling | Integrated Peltier thermoelectric module |
| Control Interface | Front-panel keypad with LED display & RS-232 remote control |
| Dimensions (H×W×D) | 146 × 283 × 537 mm |
| Weight | 16 kg |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ST-20 |
| Pricing | Available Upon Request |
| Standard Throughput | 20 L/h (adjustable 5–40 L/h) |
| Minimum Batch Volume | 3–5 L |
| Max Sterilization Temp | 150 °C |
| Holding Time Options | 5 s, 15 s, 30 s (at 20 L/h) |
| Fill Temp Range | 20–90 °C |
| SIP Capability | Integrated |
| CIP Flow Rate | 400 L/h |
| Max Operating Pressure | 10 bar |
| Power Supply | 3-phase, 380 V, 10 kW |
| Dimensions (UHT Unit) | 1600 H × 1200 L × 950 W mm |
| CT-20 Aseptic Filling Chamber | HEPA Filtration ≥99.999% @ 0.3 µm, Class 100 (Fed. Std. 209E), 850 × 660 × 2100 mm (L×W×H), 220–240 V / 50 Hz / 0.25 kW |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ST-20 |
| Pricing | Upon Request |
| Standard Throughput | 20 L/h (adjustable 5–40 L/h) |
| Minimum Batch Volume | 3–5 L |
| Max Sterilization Temp | 150 °C |
| Holding Time Options | 5 s / 15 s / 30 s (at 20 L/h) |
| Fill Temp Range | 20–90 °C |
| SIP Capability | Integrated |
| CIP Flow Rate | 400 L/h |
| Max Operating Pressure | 10 bar |
| Power Supply | 3-phase, 380 V, 10 kW |
| Dimensions (UHT Unit) | 1600 H × 1200 L × 950 W mm |
| CT-20 Aseptic Filling Chamber | HEPA Filtration ≥99.999% @ 0.3 µm, Class 100 (Fed. Std. 209E), 850 × 660 × 2100 mm (L×W×H), 220–240 V / 50 Hz / 0.25 kW |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ST-20 |
| Pricing | Available Upon Request |
| Standard Throughput | 20 L/h (adjustable 5–40 L/h) |
| Minimum Batch Volume | 3–5 L |
| Max Sterilization Temp | 150 °C |
| Hold Time Options | 5 s, 15 s, 30 s (at 20 L/h) |
| Fill Temp Range | 20–90 °C |
| SIP Capability | Integrated |
| CIP Flow Rate | 400 L/h |
| Max System Pressure | 10 bar |
| Power Supply | 3-phase, 380 V, 10 kW |
| Dimensions (UHT Unit) | 1600 H × 1200 L × 950 W mm |
| CT-20 Aseptic Filling Chamber | HEPA Filtration Efficiency ≥99.999% @ 0.3 µm |
| Chamber Dimensions | 850 L × 660 W × 2100 H mm |
| Chamber Power | Single-phase, 220–240 V, 50 Hz, 0.25 kW |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ST-20 |
| Pricing | Upon Request |
| Standard Throughput | 20 L/h (adjustable 5–40 L/h) |
| Minimum Batch Volume | 3–5 L |
| Max Sterilization Temp | 150 °C |
| Hold Time Options | 5 s / 15 s / 30 s (at 20 L/h) |
| Fill Temp Range | 20–90 °C |
| In-line SIP Capability | Yes |
| In-line CIP Flow Rate | 400 L/h |
| Max System Pressure | 10 bar |
| PID Temperature Control Accuracy | ±0.5 °C |
| Power Supply | 3-phase, 380 V, 10 kW |
| Dimensions (UHT Unit) | 1600 H × 1200 L × 950 W mm |
| CT-20 Aseptic Filling Chamber | ISO Class 5 (Fed. Std. 209E Class 100), HEPA Filtration Efficiency: 99.999% @ 0.3 µm |
| Chamber Dimensions | 850 L × 660 W × 2100 H mm |
| Chamber Power | Single-phase, 220–240 V, 50 Hz, 0.25 kW |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 04802-13 |
| Instrument Type | Magnetic Hotplate Stirrer |
| Max Stirring Volume | 20 L |
| Speed Range | 30–1200 rpm |
| Temperature Control Range | 30–540 °C |
| Heating Plate Material | Cast Aluminum |
| Display | Dual LED (Set/Actual Temp + Speed) |
| Safety Features | Over-Temp Protection, Hot Surface Indicator (>50 °C), Splash-Resistant Housing |
| Included Accessories | PTFE-Coated Stainless Steel Temperature Probe (15 cm), Support Rod (46 cm), Probe Clamp, Timer Function |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 33858-65 |
| Type | Programmable Box-Type Muffle Furnace |
| Max Temperature | 1100 °C |
| Temperature Accuracy | ±1 °C |
| Temperature Uniformity | ±5 °C |
| Internal Dimensions (L×W×H) | 15.2×15.2×22.9 cm |
| Chamber Volume | 5.2 L |
| Power Supply | 240 V, 50/60 Hz |
| Rated Power | 1800 W |
| Weight | 50 kg |
| Heating Method | Embedded Resistive Heating Elements |
| Insulation | Dual-Layer Ceramic Fiber |
| Communication Interface | RS485 (optional factory-installed) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 52412-86 |
| Instrument Type | Natural Convection Drying Oven |
| Temperature Range | Ambient to 275 °C |
| Temperature Uniformity | ±4 °C at 200 °C |
| External Dimensions (W×D×H) | 65×66×60 cm |
| Internal Chamber Dimensions (W×D×H) | 46×34×46 cm |
| Chamber Material | Stainless Steel (Interior and Exterior) |
| Heating Method | Natural Convection |
| Power Supply | 240 V, 50/60 Hz |
| Power Consumption | 1034 W (5.5 A) |
| Net Weight | 53 kg |
| Standard Shelving | 1 adjustable stainless steel shelf (5 total shelf positions |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 05053-12 |
| Voltage | 230 V, 50/60 Hz |
| Power | 1800 W (2.5 A) |
| Chamber Volume | 19.8 L |
| Temperature Range | Ambient to 200 °C |
| Temperature Uniformity | ±5 °C |
| Vacuum Range | 0–30 inHg |
| Chamber Dimensions (L×W×H) | 25 × 25 × 30 cm |
| External Dimensions (L×W×H) | 51 × 41 × 41 cm |
| Net Weight | 59 kg |
| Shelving | 2 stainless steel shelves |
| Heating Method | Surround-type electric heating with mechanical thermostatic control |
| Vacuum Interface | 1/4" ID vacuum port on front panel |
| Gas Purge Capability | Compatible with inert gas (N₂, Ar) via three-way valve |
| Construction | Full 304 stainless steel interior and exterior |
| Sealing | High-integrity silicone gasket |
| Safety | Built-in over-temperature protection |
| Vacuum Gauge | Analog Bourdon-tube pressure gauge |
| Brand | Truelab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Platform Dimensions | 150 × 150 mm |
| Construction Material | Full 304 Stainless Steel |
| Load Capacity | ≥50 kg (static, center-loaded) |
| Height Adjustment Range | 80–320 mm |
| Mechanism | Precision Dual-Gear Rack & Pinion with Locking Knob |
| Surface Finish | Electropolished, Non-Porous, Corrosion-Resistant |
| Compliance | Meets ISO 9001 manufacturing standards for lab-grade mechanical support equipment |
| Brand | Grant Instruments |
|---|---|
| Origin | United Kingdom |
| Model | RS14 |
| Material | 316 Stainless Steel |
| Load Capacity | 20 kg |
| Platform Dimensions | 300 × 250 mm |
| Height Adjustment | Fixed at 140 mm |
| Foot Design | Non-slip rubber pads |
| Compliance | CE-marked, ISO 9001-manufactured components |
| Key | Origin: China |
|---|---|
| Manufacturer Type | Distributor |
| Pricing | Upon Request |
| Slot Count (Large) | 16 |
| Slot Width (Large) | 32.5 mm |
| Max Feed Size (Large) | ≤13 mm |
| Slot Count (Medium) | 18 |
| Slot Width (Medium) | 15 mm |
| Max Feed Size (Medium) | ≤6 mm |
| Slot Count (Small) | 24 |
| Slot Width (Small) | 7.5 mm |
| Max Feed Size (Small) | ≤3 mm |
| Minimum Slope Angle | ≥60° |
| Brand | CME (Zhongjiao Jinyuan) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic |
| Model | Standard Electrolytic Cell |
| Pricing | Upon Request |