Constant Temp/Heating/Drying Equipment
Filter
Showing 1021–1050 of 3291 results
| Brand | KJG (Hefei Kejing) |
|---|---|
| Origin | Anhui, China |
| Model | GSL-1700X-MGI-4 |
| Maximum Temperature | 1700 °C |
| Control Accuracy | ±1 °C |
| Total Power | 6 kW |
| Heating Rate (to max temp) | 10 °C/min |
| Tube Dimensions | Φ25 mm OD × 460 mm L (4×) |
| Constant-Temperature Zone | 30 mm (±1 °C), 60 mm (±5 °C) |
| Vacuum Capability | 10⁻⁵ torr (with turbomolecular pump) |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Thermocouple Type | Type B (4× independent) |
| Voltage | 208–240 V AC, single-phase, 50/60 Hz |
| Certifications | CE, UL/MET/CSA compliant components (>24 V), TÜV/CAS optional upon request |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1200X-5L-UL |
| Maximum Temperature | 1200°C |
| Temperature Uniformity | ±5°C (within 250 × 250 × 250 mm at 1000°C, 3-h hold) |
| Control Accuracy | ±1°C |
| Heating Rate | 20°C/min (to max temp) |
| Internal Chamber Dimensions | 400 × 400 × 400 mm |
| Chamber Volume | 64 L |
| Rated Power | 8.8 kW |
| Voltage | AC 208–240 V, single-phase, 50/60 Hz |
| Heating Element Material | Molybdenum-doped Fe-Cr-Al alloy |
| Chamber Lining | High-purity alumina fiber with US-imported high-temperature alumina coating |
| Floor Load Capacity | 100 kg (supported by embedded SiC plate) |
| Cooling | Dual-layer housing with forced-air cooling (outer surface <60°C) |
| Safety | Dual K-type super-thermocouples (OMEGA), independent control & alarm circuits, UL/MET/CSA certified components (>24 V), CE compliant |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SFM-2 |
| Rated Voltage | AC 220 V |
| Rated Power | 220 W |
| Speed Control | PID Closed-Loop Speed Regulation |
| Drive Mechanism | Nylon Gear Transmission |
| Revolution Speed (Turntable) | 0–100 rpm |
| Rotation Speed (Jar) | 0–300 rpm |
| Dimensions (W×D×H) | 450 × 490 × 530 mm |
| Net Weight | 55 kg |
| Standard Jar Capacity | 4 × 500 mL |
| Jar Materials | Stainless Steel or Nylon |
| Ball Diameters | 6, 10, 12, 15, 20 mm |
| Minimum Final Particle Size | ≤ 0.1 µm (100 nm) |
| Compliance | CE-marked per EN 61000-6-2 / EN 61000-6-4 |
| Brand | KJG |
|---|---|
| Origin | Anhui, China |
| Model | OTF-1200X-V |
| Max Temperature | 1200 °C |
| Continuous Operating Temperature | 1100 °C |
| Temperature Uniformity | ±1 °C |
| Heating Rate (to max temp) | ≤20 °C/min |
| Total Power | 6 kW |
| Input Voltage | AC 208–240 V, 50/60 Hz, Single-Phase (40 A circuit breaker required) |
| Chamber Dimensions | 50 mm OD × 44 mm ID × 1400 mm L (standard) |
| optional quartz tubes | 60/54, 80/74, 100/94 mm OD/ID × 1400 mm L |
| Heating Zones | Five independent 152 mm zones |
| Effective Isothermal Zone | 635 mm (when all zones set to same temperature) |
| Thermocouple Type | K-type Omega-certified |
| Control Method | PID with 30-segment programmable ramp-soak profiles |
| Insulation | High-purity alumina fiber + US-imported high-temp alumina coating |
| Cooling | Dual-layer air-cooled housing (surface temp <60 °C) |
| Certification | CE compliant |
| Warranty | 12 months (excludes consumables: quartz tube, heating elements, silicone O-rings) |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DB-4S |
| Price | Upon Request |
| Temperature Setting Range | +25 °C to +100 °C |
| Temperature Control Range | Ambient +5 °C to +100 °C |
| Stability @37 °C | ±0.03 °C |
| Uniformity @37 °C | ±0.12 °C |
| Setpoint Resolution | 0.1 °C |
| Display | Dual-line LCD |
| Heating Time (25 °C → 37 °C) | 4 min |
| Heating Time (25 °C → 60 °C) | 10 min |
| Heating Time (25 °C → 100 °C) | 40 min |
| Capacity | 32 × 0.2 mL microtubes or 4 × 0.2 mL PCR strip tubes |
| Timer Range | 1–96 h |
| Input Voltage | 12 V DC |
| Input Current | 0.85 A |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ETCU Series Environmental Test Chambers |
| Pricing | Available Upon Request |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | PSL |
| Temperature Range | –40 °C to 0 °C / –80 °C to 0 °C / –80 °C to 20 °C |
| Temperature Stability | ±0.5 °C (PSL-1400) / ±1.0 °C (PSL-1810, PSL-2000) |
| Stirring Speed | 100–800 rpm |
| Heating Power | 250 W / 450 W / 750 W |
| Cooling Capacity | Air-Cooled Compressor System (R404A, R507A/R23 Dual-Circuit) |
| Tank Material | SUS304 Stainless Steel |
| Capacity | 2.1 L / 3.5 L / 8 L |
| Stirring Motor Output | 15 W / 25 W / 25 W |
| Safety Features | Leakage Current Protection, Overcurrent Protection, Overheating Prevention, Compressor High-Pressure Cut-off, Sensor Open-Circuit Detection, Self-Diagnostic Function (Heater Fault, Sensor Anomaly, Temp Deviation Alert), Compressor Delay Start |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | PSL-1810 |
| Temperature Range | −80 °C to 0 °C |
| Temperature Stability | ±1 °C |
| Stirring Speed | 100–800 rpm |
| Heating Power | 450 W |
| Cooling System | Dual-compressor, air-cooled |
| Refrigerants | R507A (primary stage), R23 (secondary stage) |
| Bath Capacity | 3.5 L |
| Bath Chamber Dimensions | Φ180 × 140 H mm (SUS304 stainless steel) |
| Max. Vessel Size | Φ95 mm × 300 mL |
| External Dimensions | 530 W × 450 D × 520 H mm |
| Weight | ~70 kg |
| Control Method | PID temperature control |
| Display & Setting | Digital LED display with manual keypad input |
| Safety Functions | Leakage current protection, overcurrent cutoff, heater over-power prevention, compressor high-pressure cutoff, relay overload protection, self-diagnostic system (heater fault, sensor failure, high/low temperature alarm), compressor time-delay startup |
| Auxiliary Function | Auto power-on/off scheduling |
| Stirrer Output | 25 W |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | SD-1000 |
| Inlet Temperature Range | 40–200 °C |
| Temperature Control Accuracy | ±1 °C |
| Max. Evaporation Rate | 1500 mL/h |
| Drying Air Flow | 0.2–0.75 m³/min |
| Atomizing Air Pressure | 20–245 kPa |
| Feed Pump Flow Rate | 150–1700 mL/h |
| Stirrer Speed | 100–1000 rpm |
| Sample Vessel Capacity | 50 mL–2 L |
| Heater Power | 3 kW |
| Nozzle Type | Twin-fluid nozzle (standard orifice ID: 0.4 mm) |
| Construction | Borosilicate glass evaporation chamber & cyclonic separator |
| Powder Collection Vessel | 600 mL borosilicate glass |
| Safety Features | Real-time diagnostics for inlet/outlet temperature deviation, airflow anomaly, heater fault, and feed pressure failure |
| Auto-cleaning Interval | Programmable 1–20 min cycles |
| Analog Output | 0–10 mV (inlet temp, outlet temp, air flow) |
| Dimensions (W×D×H) | 700 × 620 × 1500 mm |
| Weight | ~110 kg |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | SD-1010 |
| Evaporation Capacity | Up to 1500 mL/h |
| Inlet Air Temperature Range & Accuracy | 40–200 °C (±1 °C) |
| Hot Air Flow Rate | 0.2–0.75 m³/min |
| Atomizing Air Pressure | 20–250 kPa (0.2–2.5 kgf/cm²) |
| Sample Stirring Speed & Volume | 100–1000 rpm, 50 mL–2 L (water equivalent) |
| Feed Pump Flow Rate | 150–1700 mL/h |
| Heater Power | 3 kW |
| Atomizer Type | Dual-fluid nozzle (standard orifice ID: 0.71 mm) |
| Collection Vessel | Borosilicate glass, 600 mL capacity |
| Dimensions & Weight | 700 W × 620 D × 1500 H mm, approx. 110 kg |
| Power Supply | AC 220 V, single-phase, 50/60 Hz, 21 A, 4.2 kVA |
| Brand | Faithful |
|---|---|
| Origin | Hebei, China |
| Model | 98-II-C |
| Capacity | 50 mL |
| Max Surface Temperature | 450 °C |
| Temperature Control Range | Ambient +20 °C to 250 °C |
| Heating Element | Nickel-Chromium Alloy Wire |
| Insulation | High-Purity Alumina-Silica Ceramic Fiber (CE Certified) |
| Housing | Cold-Rolled Steel with Epoxy Powder Coating |
| Power Rating | 0.08 kW |
| Voltage | 200–240 V AC |
| Net Weight | 2.5 kg |
| Dimensions (Ø × H) | 220 mm × 165 mm |
| Temperature Sensor | PT100 Platinum Resistance Thermometer with Adjustable Mount |
| Controller Type | PID-Based Digital Temperature Controller with LED Display |
| Compliance | CE-marked insulation material, RoHS-compliant construction |
| Brand | Faithful |
|---|---|
| Capacity | 10000 mL |
| Heating Method | Surface conduction via Ni-Cr resistance wire |
| Max Surface Temperature | 450 °C |
| Temperature Control Range | Ambient +20 °C to 250 °C |
| Stirring Speed Range | 0–1600 rpm |
| Temperature Sensor | PT100 with adjustable sensor holder |
| Heating Power | 2.5 kW |
| Motor Power | 0.01 kW |
| Voltage | 200–240 V AC |
| Outer Shell | Cold-rolled steel with epoxy coating |
| Insulation | High-purity alumina-silica ceramic fiber + PTFE-coated fiberglass |
| Compliance | CE-certified |
| Net Weight | 16 kg |
| Overall Dimensions (Ø × H) | 470 mm × 340 mm |
| Brand | SETARAM |
|---|---|
| Origin | Taiwan |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China (Manufactured in Taiwan) |
| Model | SCF Series |
| Temperature Range | +5 °C to +35 °C |
| Temperature Stability | ±0.1 °C |
| Cooling Capacity (at 20 °C) | 934–5740 W |
| Flow Rate | 14 L/min @ 3.5 kg/cm² (optional: 20 L/min @ 5.5 kg/cm²) |
| Reservoir Volume | 3.8 L |
| Dimensions (Reservoir) | 10 × 20 × 19 cm (W×D×H) |
| Overall Dimensions (SCF-25 to SCF-100) | 33×49×60 cm to 54×62×71 cm |
| Power Supply | 110/220 V, 50/60 Hz, 4–10 A |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 62 Max+ |
| Price | Available Upon Request |
| Temperature Range | -20 °C to 320 °C (-4 °F to 608 °F) |
| Accuracy | ±1.5 °C or ±1.5% of reading (whichever is greater), typical at 23 °C ±5 °C ambient |
| Resolution | 0.01 °C / 0.01 °F |
| Emissivity Adjustment | 0.10–1.00 (adjustable in 0.01 increments) |
| Distance-to-Spot Ratio | 12:1 |
| Spectral Response | 8–14 µm |
| Response Time | <500 ms |
| Operating Environment | 0 °C to 50 °C, <95% RH non-condensing |
| Dimensions | 170 × 44 × 40 mm |
| Weight | 175 g |
| Display | Backlit LCD with dual-unit capability (°C/°F) |
| Laser Targeting | Single-point Class II laser (650 nm, <1 mW) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | FP-25 / FP-40 |
| Voltage/Power | 220 V AC, 2500 W (FP-25) / 4000 W (FP-40) |
| Chamber Dimensions | 200 × 120 × 80 mm (FP-25) / 300 × 200 × 120 mm (FP-40) |
| Maximum Operating Temperature | 1000 °C |
| Insulation Material | High-Purity Alumina-Silica Ceramic Fiber (≥1260 °C rated) |
| External Casing | Cold-Rolled Steel with Epoxy Powder Coating |
| Compliance | CE-marked per EN 61000-6-3 (EMC) and EN 61000-6-4 |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | FP-40 |
| Voltage/Power | 220 V / 4000 W |
| Chamber Dimensions (W×D×H) | 300 × 200 × 120 mm |
| Maximum Operating Temperature | 1000 °C |
| Construction | Cold-Rolled Steel Outer Casing + High-Density Ceramic Fiber Insulation |
| Compliance | CE-marked per IEC 61000-6-3 (EMC) and IEC 61000-6-2 (Immunity) |
| Brand | France Etuves |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | XUE490 |
| Instrument Type | Precision Drying Oven |
| Temperature Range | 30°C to 300°C |
| Temperature Uniformity | ±0.5°C |
| External Dimensions | 864 × 1092 × 1294 mm (W × D × H) |
| Internal Chamber Dimensions | 700 × 700 × 1000 mm (W × D × H) |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Forced-Air Convection with Dual-Directional Fan System |
| Brand | Froilabo |
|---|---|
| Origin | France |
| Model | AC 60 / AC 120 / AC 240 |
| Temperature Range | Ambient +5°C to 250°C |
| Temperature Uniformity | ≤ ±0.5°C at 70°C, ≤ ±1.2°C at 105°C |
| Temperature Stability | ≤ ±0.2°C at 150°C, ≤ ±0.4°C at 250°C |
| Display Resolution | 0.1°C |
| Chamber Volume | 58 L / 117 L / 230 L |
| Heating Power | 1000 W / 1000 W / 2000 W |
| Voltage | 230 V / 50 Hz |
| Internal Dimensions (W×D×H, mm) | 400×370×390 / 500×470×500 / 500×470×980 |
| External Dimensions (W×D×H, mm) | 522×540×640 / 622×640×740 / 622×640×1236 |
| Net Weight | 39 kg / 53 kg / 79 kg |
| Max. Air Exchange Rate | 50 / 35 / 35 × chamber volume per hour |
| Shelf Load Capacity (per shelf / total) | 20 kg / 50 kg / 20 kg / 70 kg / 20 kg / 90 kg |
| Shelf Quantity | 2 standard shelves |
| Shelf Grid Count | 21 / 29 / 62 |
| Shelf Size (mm) | 380×320 / 480×430 / 480×430 |
| Door | Double-glazed insulated glass with silicone gasket |
| Interior Material | AISI 304 stainless steel |
| Exterior Finish | Epoxy-polyester powder coating |
| Control System | PID digital temperature controller with over-temperature safety cut-off |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FTF11 |
| Pricing | Available Upon Request |
| Max Operating Temperature | 700 °C |
| Heating Chamber Dimensions (D×L) | 11 cm × 20 cm |
| External Dimensions (L×W×H) | 40 cm × 30 cm × 30 cm |
| Controller Dimensions (L×W×H) | 30 cm × 25 cm × 30 cm |
| Thermocouple Type | J-Type |
| Heating Element Material | Kanthal A-1 |
| Power Supply | 220 V, 50 Hz, 30 A |
| Rated Power at 700 °C | ~2 kW |
| Temperature Control | PID Algorithm with SCR Power Regulation |
| Cooling Method | Integrated Water-Cooling System |
| Atmosphere Options | Ambient Air, Vacuum, Inert/Reactive Gas (User-Specified), Atmospheric Pressure Range: 0–101.3 kPa |
| Mass | ~1 kg |
| Temperature Uniformity & Stability | ±0.5 °C at Setpoint (Center Zone, Steady-State) |
| Origin | USA |
|---|---|
| Type | Box-type muffle furnace |
| Model | E14 |
| Maximum Temperature | 1093°C |
| Temperature Uniformity | ±3°C |
| Rated Power | 3120 W |
| Internal Dimensions (W×D×H) | 331 × 343 × 223 mm |
| Heating Element | Kanthal A1 resistance wire |
| Insulation | 150 mm thick refractory ceramic fiber |
| Voltage/Frequency | 230 V / 50 Hz |
| Compliance | CE, UL Listed (per UL 746A & UL 1286) |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | 9023 |
| Pricing | Available Upon Request |
| Temperature Range | RT +10°C to 300°C |
| Temperature Uniformity | ≤ ±3°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Sensor | Pt100 Platinum Resistance Thermometer |
| Display | LED Digital |
| Exterior | Powder-Coated Cold-Rolled Steel with Anti-Rust Treatment |
| Interior | SUS304 Brushed Stainless Steel |
| Insulation | High-Performance Glass Wool |
| Heating Element | Nickel-Chromium Alloy Wire |
| Circulation Fan | Centrifugal Blower |
| Safety Protections | Over-Temperature Cut-Off, Fan Overheat Protection |
| Shelf Load Capacity | 5 kg per shelf |
| Internal Dimensions (D×W×H) | 300 × 300 × 275 mm |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Category | Domestic |
| Model | DHG-9023A-aa |
| Temperature Range | Ambient +10°C to 300°C |
| Temperature Uniformity | ≤±3°C |
| Temperature Fluctuation | ≤±0.5°C |
| Internal Dimensions (D×W×H) | 300 mm × 300 mm × 275 mm |
| External Dimensions (D×W×H) | 625 mm × 500 mm × 490 mm |
| Inner Chamber Material | SUS304 Brushed Stainless Steel |
| Heating Method | Nickel-Chromium Alloy Wire with Centrifugal Forced-Air Circulation |
| Power Rating | 1000 W |
| Supply Voltage/Frequency | 220 V, 50 Hz |
| Net Weight | 31.5 kg |
| Safety Protections | Over-Temperature Cut-Off, Fan Overheat Protection |
| Shelf Load Capacity | 5 kg |
| Sensor | Pt100 Platinum Resistance Thermometer |
| Display | LED Digital |
| Insulation | Super Glass Wool |
| Outer Casing | Cold-Rolled Steel with Anti-Rust Coating and Powder Finish |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Category | Domestic |
| Model | DHG-9030A-aa |
| Temperature Range | +10 °C to +200 °C |
| Temperature Uniformity | ≤ ±0.5 °C |
| External Dimensions | 625 mm × 500 mm × 490 mm |
| Internal Chamber Dimensions | 300 mm × 300 mm × 350 mm |
| Chamber Material | Stainless Steel (SUS304) |
| Heating Method | Electrically Heated Forced-Air Circulation |
| Rated Power | 1000 W |
| Electrical Supply | 220 V, 50 Hz |
| Instrument Class | Precision Laboratory Drying Oven |
| Brand | Genlab |
|---|---|
| Origin | United Kingdom |
| Model | HAS/50/SS |
| Temperature Range | 40–250 °C |
| Temperature Uniformity | ±0.75 °C |
| Temperature Stability | ±0.5 °C |
| Internal Chamber Dimensions (W×D×H) | 340 × 320 × 320 mm |
| External Dimensions (W×D×H) | 620 × 530 × 490 mm |
| Chamber Material | AISI 304 Stainless Steel |
| Heating Method | Forced-air convection with high-efficiency centrifugal fan |
| Capacity | 50 L |
| Programmable Ramp-Soak Profile | 8-segment (4 ramps + 4 holds) |
| Timer Range | 0–99 h |
| Safety | Independent over-temperature protection circuit |
| Display | Dual LED display (setpoint & actual temperature) |
| Standard Accessories | 2 adjustable stainless steel shelves, 3 shelf positions |
| Brand | Genlab |
|---|---|
| Origin | United Kingdom |
| Model | ME/250 |
| Instrument Type | Forced-Air Drying Oven |
| Temperature Range | 40–250 °C |
| Temperature Uniformity | ±0.75 °C |
| Temperature Stability | ±0.5 °C |
| Chamber Dimensions (W×D×H) | 450 × 490 × 460 mm |
| External Dimensions (W×D×H) | 570 × 850 × 590 mm |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Horizontal Forced-Air Convection with Dual-Side & Rear Mounted NiCr Sheathed Elements |
| Control System | PID Microprocessor-Based Digital Controller with Dual LED Display (Setpoint & Actual Temperature), Tamper-Proof Calibration Lock, Independent Over-Temperature Cut-Out (Mechanical Backup) |
| Brand | Genlab |
|---|---|
| Origin | United Kingdom |
| Model | OV/100 |
| Temperature Range | 40–250 °C |
| Temperature Uniformity | ±0.75 °C |
| Internal Dimensions (H×W×D) | 42 × 53 × 46 cm |
| External Dimensions (H×W×D) | 57 × 85 × 59 cm |
| Chamber Material | Stainless Steel |
| Heating Method | Forced-air convection via rear/side-mounted NiCr sheathed elements |
| Fan Standard | Yes (≥30 L capacity) |
| Control System | Dual PID digital controller with dual-display (setpoint & actual temperature), mechanical over-temperature cut-out, tamper-proof calibration lock, and status indicators for heating and overheat protection |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | T100-MST20 |
| Price | Upon Request |
| Temperature Range | RT + 5°C to 100°C |
| Temperature Stability | ±0.05°C |
| Display | 4-digit LED |
| Temperature Resolution | 0.1°C |
| Heating Power | 1.3 kW (230 V) / 1.4 kW (120 V) |
| Bath Opening | 240 × 210 mm |
| Bath Capacity | 20 L |
| Minimum/Maximum Liquid Depth | 185 / 225 mm |
| Total Power Consumption | 1.4 kW (230 V, 50/60 Hz) / 1.5 kW (120 V, 50/60 Hz) |
| Max. Gerber Fat Meter Capacity | 36 units (3 × H1-25M racks, 12 per rack) |
| Safety Features | Fixed overtemperature cut-off, low-level fluid alarm |
| Control System | Detachable digital PID controller with adaptive tuning, 3 programmable setpoints, flywheel + dual-button interface |
| Construction | Acid-resistant stainless steel inner tank and outer housing, removable stainless steel lid with ergonomic handles |
| Immersed Components | Acid-resistant heater, float switch, and Pt100 temperature sensor |
| Calibration | User-executable self-calibration routine |
| Brand | Gerber |
|---|---|
| Origin | Germany |
| Model | WB 436-D |
| Bath Volume | 16 L |
| Temperature Range | Ambient to 99 °C |
| Temperature Stability | ±0.3 °C (at 37 °C, steady state) |
| Circulation | Internal & External Pump |
| Power | 1000 W |
| Voltage/Frequency | 230 V / 50–60 Hz |
| Display | 4-digit LED |
| Timer Range | 1–99 min |
| Dimensions (L×W×H) | 396 × 331 × 265 mm |
| Weight | 10.1 kg |
| Construction | Stainless Steel Inner & Outer Chamber |
| Overheat Protection | Dual-stage thermal cutoff |
| Recommended Fluid | Distilled Water |
| Brand | Gerhardt |
|---|---|
| Origin | Germany |
| Manufacturer | C. Gerhardt GmbH & Co. KG |
| Model | KI 1 |
| Maximum Temperature | 600 °C |
| Heating Zone | Single |
| Flask Capacity Range | 50–250 mL |
| Dimensions (W×D×H) | 150 × 225 × 130 mm |
| Weight | 2 kg |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Power Rating | 450 W |
| Ordering Code | 10-0003 |