Constant Temp/Heating/Drying Equipment
Filter
Showing 1231–1260 of 3291 results
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | SX-4-10 |
| Instrument Type | Box-Type Resistance Furnace |
| Rated Temperature | 1000 °C |
| Rated Power | 4.0 kW |
| Voltage Supply | 220 V AC |
| Internal Chamber Dimensions | 300 × 200 × 120 mm (L × W × H) |
| Net Weight | 108 kg |
| External Dimensions (D × W × H) | 700 × 465 × 535 mm |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | WS-2-400-2 |
| Instrument Type | Constant-Temperature Water Bath Circulator |
| Circulation Mode | Internal Circulation Only |
| Temperature Control | Heating-Only |
| Bath Volume | 24 L |
| Temperature Range | RT + 5 °C to 100 °C |
| Temperature Stability | ±0.05 °C |
| Temperature Resolution | 0.01 °C |
| Input Power | 1200 W |
| Supply Voltage | 220 V AC |
| Display | Large LCD with Touch Keypad |
| Safety Features | Dual-Stage Overtemperature Protection, Dry-Run Prevention via Level Sensor, PT100 Sensor Fault Detection, Adjustable Temperature Offset Calibration |
| Communication Interface (Optional) | RS-232 or RS-485 |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | WS-3 |
| Instrument Type | Constant-Temperature Bath |
| Circulation Mode | Internal Circulation |
| Temperature Control | Heating-Only |
| Bath Capacity | 30 L |
| Temperature Range | Ambient to 80 °C |
| Temperature Stability | ±0.05 °C |
| Display Resolution Options | 0.1 °C / 0.01 °C / 0.001 °C |
| Working Chamber Dimensions | Ø300 mm × 400 mm (D × H) |
| Opening | 4 × Ø65 mm |
| Depth | 400 mm |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | WS-6 |
| Instrument Type | Constant-Temperature Circulating Bath |
| Circulation Mode | Internal Circulation |
| Temperature Control | Refrigeration & Heating |
| Bath Volume | 28 L |
| Temperature Range | 0–80 °C |
| Temperature Stability | ±0.05 °C |
| Bath Dimensions (Ø × H) | 300 × 400 mm |
| Opening Configuration | 4 × Ø65 mm |
| Depth | 400 mm |
| Display Resolution | 0.01 °C |
| Control Algorithm | PID with Auto-Tuning & Manual Adjustment |
| Safety Features | Dual Independent Temperature Protection, Compressor Overheat/Overcurrent Protection |
| Communication Interface | Optional RS-232 or RS-485 |
| Programmable Ramp Control | Optional |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | ZC-10 |
| Bath Volume | 10 L |
| Temperature Range | Ambient to 100 °C |
| Temperature Stability | ±0.1 °C |
| Circulation Type | Internal & External Pump |
| Display | Dual LED (Setpoint & Actual Temperature) |
| Brand | Harry Gestigkeit |
|---|---|
| Origin | Germany |
| Model | PZ28-3TD |
| Instrument Type | Constant-Temperature Bath |
| Circulation Function | Internal Circulation |
| Temperature Control | Heating-Only |
| Bath Volume | 1 L |
| Temperature Range | RT to 600 °C |
| Temperature Stability | ±2 K at 600 °C |
| Heating Surface | 280 × 200 mm (Ti) |
| Uniform Zone | 230 × 160 mm |
| Power | 2000 W |
| Voltage | 220–240 V / 50–60 Hz |
| Dimensions (L×W×H, no lid) | 350 × 300 × 110 mm |
| Height with Lid | 145 mm |
| Sealed Gap Height | 26 mm |
| Weight (no lid) | 8 kg |
| Weight (with lid) | 10 kg |
| Cable Length | 1.5 m |
| Brand | Harry Gestigkeit |
|---|---|
| Origin | Germany |
| Model | SVD95/P |
| Power | 2500 W |
| Voltage | 220 V |
| External Dimensions | 450 × 310 × 180 mm |
| Maximum Temperature | 950 °C |
| Heating Time (RT → 950 °C) | < 5 min |
| Crucible Capacity | 8 × Ø34 mm or up to 4 × Ø50 mm |
| Ashing Bed Length | 400 mm |
| Timer Range | 0–120 min with audible alarm |
| Safety Interlock | Lid-activated power cutoff |
| Construction Material | Grade G stainless steel |
| Compliance | CE-marked, designed for ISO 562 / ASTM D3174 / AOAC 942.05 ash content determination |
| Brand | Harvard Apparatus |
|---|---|
| Origin | USA |
| Model | Heat Therapy Pump |
| Connector Type | Click-Tight or Colder |
| Flow Rate | 9–14 gal/hr |
| Operating Temperature Range | 85–107 °F |
| Hose Length | 10 ft (3 m) |
| Power Supply | 120 VAC, 60 Hz or 220 VAC, 50 Hz |
| Dimensions (W × D × H) | 8.5 × 5.6 × 6.25 in (20.6 × 14.3 × 16.2 cm) |
| Weight | 5.2 lb (2.6 kg) |
| Accuracy | ±2 °F |
| Mobility | Four swivel casters + integrated carrying basket |
| Brand | Harvard Apparatus |
|---|---|
| Model | Homeothermic Blanket System |
| Origin | USA |
| Control Range | 35–40 °C (95–104 °F) |
| Preset Temperature | 37 °C |
| Probe Types | Flexible (2 mm Ø, 100 mm length) & Rigid Stainless Steel (1.6 mm Ø) |
| Blanket Sizes | Small (15 × 20 cm), Medium (45 × 70 cm), Large (60 × 90 cm) |
| Cable Length | 2 m (blanket & probe) |
| Power Delivery | Proportional DC control |
| Display | Front-panel LCD + LED power bar graph |
| Electrical Isolation | Floating design with optional grounding switch |
| Compliance | Designed for GLP-compliant in vivo physiological studies |
| Brand | HC |
|---|---|
| Origin | Jiangsu, China |
| Model | MINIB-100P |
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Accuracy | ≤ ±0.3°C |
| Heating Time | ≤6 min (20°C → 56°C) |
| Dimensions | 145 × 113 × 110 mm |
| Net Weight | 0.5 kg |
| Display Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±0.3°C |
| Stability | ±0.3°C |
| Timer Range | 1 min – 99 h |
| Power Supply | AC 100–240 V, 50–60 Hz |
| Optional Modules | A (Φ10 mm, 15 wells), B (Φ12 mm, 12 wells), C (Φ15 mm, 8 wells), D (Φ16 mm, 8 wells), E (Φ12 mm conical bottom, 14 wells, compatible with Sihuan BI), F (Φ9 mm, 18 wells) |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Crystal Structure | Hexagonal (α-Al₂O₃) |
| Lattice Parameters | a = 4.758 Å, c = 12.992 Å |
| Orientation Options | C-plane (0001), A-plane (11–20), M-plane (10–10), R-plane (1–102) |
| Purity | >99.99% |
| Melting Point | 2040 °C |
| Density | 3.98 g/cm³ |
| Mohs Hardness | 9 |
| Thermal Expansion Coefficient | 7.5 × 10⁻⁶ /°C |
| Thermal Conductivity | 46.06 W/(m·K) @ 0 °C, 25.12 W/(m·K) @ 100 °C, 12.56 W/(m·K) @ 400 °C |
| Dielectric Constant | ~9.4 (a-axis), ~11.58 (c-axis) @ 300 K |
| Loss Tangent | <2×10⁻⁵ (a-axis), <5×10⁻⁵ (c-axis) |
| Surface Finish | Single- or double-side polished, Ra < 0.5 nm |
| Dimensional Tolerance | ±0.2° orientation, ±0.05 mm thickness |
| Standard Packaging | Class 1000 cleanroom assembly, Class 100 clean bags or individual substrate carriers |
| Brand | Hefei KEJING |
|---|---|
| Model | DHG-9000J |
| Chamber Dimensions | 35 cm × 45 cm × 45 cm |
| Internal Volume | 71 L |
| Operating Temperature Range | 25 °C to 400 °C |
| Temperature Uniformity | ±5 °C |
| Control Accuracy | ±1 °C |
| Max Heating Rate | 7 °C/sec |
| Rated Power | 3.2 kW |
| Voltage | 208–240 V AC, 50/60 Hz |
| Current Rating | 16 A |
| Chamber Material | Anodized Aluminum |
| Safety Features | Over-Temperature Alarm, LED Status Indicator, Programmable Timer |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | DZF-6020-220 |
| Chamber Volume | 25 L (300 × 300 × 275 mm) |
| Max Operating Temperature | 200 °C |
| Temperature Control Accuracy | ±1.5 °C |
| Temperature Uniformity | ±5 °C (at center heating zone) |
| Vacuum Range | 0–30 inHg (≤133 Pa) |
| Heating Power | 1000 W |
| Voltage | 220 V AC, 60 Hz |
| Chamber Material | 304 Stainless Steel |
| Insulation | 76 mm Glass Wool |
| Door Seal | Silicone Gasket with Mechanical Latch |
| Vacuum Port ID | 6.35 mm (¼") |
| Standard Shelving | 2 Electroplated Carbon Steel Trays + 1 Movable Anodized Aluminum Rack |
| Vacuum Requirement | Single-Stage Rotary Vane Pump Required |
| Brand | Hefei Kejing |
|---|---|
| Model | DZF-6020-HT |
| Chamber Volume | 25 L |
| Max Operating Temperature | 500 °C |
| Temperature Range | 50–500 °C |
| Temperature Uniformity | ±3 °C |
| Vacuum Interface | KF-25 |
| Inlet Port | 1/4″ stainless steel tube with shut-off valve |
| Gas Flow Control | 50–500 mL/min glass tube rotameter |
| Heating Power | 1800 W |
| Cooling | External recirculating water cooling (Φ6.35 mm hose) |
| Vacuum Pump Compatibility | Dual-stage rotary vane pump (optional, ≤133 Pa) |
| Chamber Material | Mirror-finish 304 stainless steel |
| Insulation | High-purity alumina fiber |
| Sealing | Fluoroelastomer (FKM) gasket |
| Controller | 30-segment PID programmable temperature controller with over-temperature protection |
| Certification | CE Certified |
| External Dimensions (L×W×H) | 590 × 490 × 450 mm |
| Net Weight | Approx. 68 kg |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | DZF-6050-220V-MS |
| Chamber Volume | 52 L |
| Internal Dimensions | 715 × 345 × 370 mm |
| Operating Temperature Range | Ambient to 300 °C (max. 250 °C continuous) |
| Vacuum Level | ≤133 Pa (≤−0.1 MPa gauge) |
| Temperature Uniformity | ±5 °C (center vs. chamber corners) |
| Temperature Resolution | 0.1 °C |
| Programmability | 28-segment ramp-soak profile |
| Power Supply | 220 V AC, 50/60 Hz, <1500 W |
| Chamber Material | 304 stainless steel |
| Insulation | 76 mm glass fiber |
| Vacuum Tubing | Corrosion-resistant stainless steel (6.35 mm ID) |
| Safety | Polycarbonate safety shield, silicone door gasket, mechanical latch |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | GSL-1700X-VT |
| Type | Vertical Tube Furnace |
| Max Temperature | 1700 °C (≤1 h) |
| Control Accuracy | ±1 °C |
| Max Power | 4 kW |
| Heating Rate to Max Temp | 10 °C/min |
| Heating Element | Four U-shaped MoSi₂ Rods |
| Chamber Dimensions | OD 60 mm × ID 54 mm × L 800 mm |
| Certification | CE, UL/MET/CSA (components >24 V), TUV/CAS optional |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | GSL-3F |
| Price | Upon Request |
| Gas Channels | 6 (customizable from 1–8) |
| Flow Controllers | Thermal Mass Flow Controllers (MFCs) |
| Standard Full-Scale Ranges (N₂) | 200 SCCM, 500 SCCM |
| Accuracy | ±1.5% FS |
| Linearity | ±0.5–1.5% FS |
| Repeatability | ±0.2% FS |
| Response Time (Gas) | 1–4 s |
| (Electrical) | ≤10 s |
| Operating Differential Pressure Range | 0.1–0.5 MPa |
| Maximum Inlet Pressure | 3 MPa |
| Tubing | Stainless Steel SS316, OD 6 mm × ID 4 mm |
| Pressure Gauge Range | –0.1 to +0.15 MPa, Graduation: 0.01 MPa |
| Shut-off Valves | 6 × Φ6 mm High-Pressure Manual Valves |
| Display | 4-Digit LED Digital Readout |
| Operating Ambient Temperature | 5–45 °C |
| Compatible Gases | High-Purity Inert, Reducing, and Oxidizing Gases (excluding simultaneous H₂/O₂) |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | GZK-101 |
| Ultimate Vacuum | 1.0 × 10⁻¹ Pa |
| Primary Pump | 2TW-4C Rotary Vane Mechanical Pump (Pumping Speed: 4 L/s |
| Ultimate Pressure | 5 × 10⁻¹ Pa |
| Motor Power | 400 W) |
| Digital Vacuum Gauge | Range 10⁻⁴–1000 Torr |
| Operating Ambient | 5–32 °C, RH ≤ 85 % |
| Power Supply | 220 V ±10 %, 50–60 Hz |
| Total System Power Consumption | 1 kW |
| Compliance | ISO 14001-aligned environmental safety |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1100X-S-H |
| Furnace Type | Box Furnace |
| Max Temperature | 1100 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 700 W |
| Heating Rate (to max temp) | 20 °C/min |
| Internal Chamber Dimensions | 100 × 100 × 100 mm |
| Voltage | 220 V, 50/60 Hz, Single Phase |
| Continuous Operating Temp | 1000 °C |
| Intermittent Max Temp | 1200 °C (<30 min) |
| Thermocouple Type | K |
| Heating Element | Mo-doped Fe–Cr–Al Alloy |
| Insulation | High-purity Al₂O₃ Fiber with High-temp Al₂O₃ Coating |
| Door Mechanism | Top-hinged downward-opening with auto power cutoff |
| Vacuum Compatibility | Yes (with quartz tube & SS flange) |
| Vacuum Gauge | Digital display gauge included |
| Temperature Controller | PID-based with auto-tuning, 30-segment programmable ramp/soak profile |
| Safety Features | Over-temperature protection, thermocouple break detection |
| Certifications | CE, UL/MET/CSA compliant (>24 V components), NIST-traceable portable thermometer (USB/RS232) |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1200X-H |
| Furnace Type | Hybrid Box-and-Tube Furnace |
| Max Temperature | 1200 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 3.5 kW |
| Ramp Rate (to max temp) | 20 °C/min |
| Internal Chamber Dimensions | 300 × 200 × 120 mm (12″ × 8″ × 5″) |
| Heating Elements | Top & dual-side mounted |
| Insulation | High-purity alumina fiber with high-temp alumina coating |
| Cooling | Dual-shell structure with forced-air cooling |
| Surface Temp (operational) | <60 °C |
| Vacuum Capability | 10⁻³ Torr (mechanical pump), 10⁻⁵ Torr (turbo-molecular pump) |
| Tube Configuration | Two Φ50 × 600 mm fused quartz tubes with single-end seal |
| Sealing | Two stainless-steel KF25 vacuum flanges with mechanical pressure gauges, 1/4″ armored thermocouple ports |
| Viewing Window | 0.5″ fused quartz viewport on door |
| Safety | Door-interlocked power cutoff |
| Controller | FA-YD518P-AG PID temperature controller with 30-segment programmable ramp/soak, auto-tuning, over-temperature & thermocouple-failure alarms |
| Communication | DB9 RS-232 port |
| Optional Software | MTS02-Y PC-based temperature logging & control (supports real-time curve display & export) |
| Optional Controller | Eurotherm 3504 (LabVIEW-compatible) |
| Certifications | CE, UL/MET/CSA compliant for all >24 V components, RoHS compliant |
| Net Weight | 50 kg |
| External Dimensions | 635 × 670 × 535 mm (D × W × H) |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1200X-J (4.2 L) |
| Max Temperature | 1200°C |
| Temperature Uniformity | ±1°C |
| Heating Rate to Max Temp | 20°C/min |
| Rated Power | 2.5 kW |
| Internal Chamber Dimensions | 150 mm × 155 mm × 180 mm (4.2 L) |
| Heating Element | Mo-doped Fe-Cr-Al alloy with ZrO₂ coating |
| Insulation | High-purity alumina fiber + Al₂O₃ reflective coating |
| Cooling System | Dual-shell air-cooled jacket |
| Certifications | CE, UL/MET/CSA compliant (>24 V components), TÜV/CAS optional |
| Brand | Hefei Kejing |
|---|---|
| Model | KSL-1700X-A4 |
| Maximum Temperature | 1700 °C |
| Operating Temperature | ≤1650 °C |
| Chamber Dimensions (W×D×H) | 300 mm × 400 mm × 300 mm |
| Effective Volume | 36 L |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Temperature Control | 30-Stage Programmable Controller (708P) |
| Thermocouple Type | Type B (PtRh30–PtRh6) |
| Accuracy | ±1 °C at steady state |
| Max. Ramp Rate | 10 °C/min |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 15 kW |
| External Dimensions | 650 mm × 760 mm × 1550 mm |
| Net Weight | 140 kg |
| Door Configuration | Side-opening |
| Certifications | CE |
| Brand | Hefei Kejing |
|---|---|
| Model | KSL-1700X-S |
| Maximum Temperature | 1700 °C |
| Operating Temperature | Up to 1650 °C |
| Temperature Uniformity | ±1 °C |
| Heating Rate (to max temp) | 10 °C/min |
| Chamber Dimensions (W×D×H) | 120 mm × 120 mm × 120 mm |
| Heating Element | Molybdenum Disilicide (MoSi₂) Rods |
| Thermocouple Type | Type B (Platinum–Rhodium 30/6) |
| Control System | 30-Stage Programmable PID Controller (518P Series) |
| Rated Power | 2.5 kW |
| Voltage/Frequency | AC 220 V / 50 Hz |
| External Dimensions | 380 mm × 410 mm × 620 mm |
| Net Weight | 30 kg |
| Certification | CE |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1750X-A1 |
| Maximum Temperature | 1750 °C |
| Temperature Uniformity | ±1 °C |
| Rated Power | 3 kW |
| Heating Rate (to Max Temp) | 10 °C/min |
| Internal Chamber Dimensions | 150 × 150 × 150 mm |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Thermocouple Type | Type B (Pt–30%Rh / Pt–6%Rh) |
| Control System | 30-Stage Programmable PID Controller (518P) |
| Chamber Lining | Polycrystalline Alumina Fiber with US-Imported 1750 °C Alumina Reflective Coating |
| Certification | CE, UL/MET/CSA (components >24 V), Optional TÜV or CSA Single-Unit Certification Available |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1750X-A2 |
| Max Temperature | 1750 °C |
| Temperature Uniformity | ±1 °C |
| Rated Power | 5.2 kW |
| Heating Rate (to max temp) | 10 °C/min |
| Chamber Dimensions | 200 L × 200 W × 200 D mm |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Thermocouple Type | Type B (Pt–30%Rh / Pt–6%Rh) |
| Controller | 30-Stage Programmable PID with 708P Interface |
| Insulation | Polycrystalline Alumina Fiber with US-Imported 1750 °C Al₂O₃ Reflective Coating |
| External Dimensions | 820 × 460 × 545 mm |
| Net Weight | 140 kg |
| Certification | CE |
| Compliance | Designed per IEC 61000-6-3 (EMC), IEC 61000-6-2 (Immunity), and EN 60519-1 (Electrical Safety for Industrial Electroheating Equipment) |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1800X-S |
| Furnace Type | Box-type Muffle Furnace |
| Max Temperature | 1800 °C (≤2 h) |
| Continuous Operating Temperature | ≤1750 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 2.5 kW |
| Heating Rate to Max Temp | 10 °C/min |
| Heating Element | Kanthal Super-1900 MoSi₂ Rods |
| Internal Chamber Dimensions | 120 × 120 × 120 mm |
| Chamber Lining | Zirconia-Stabilized Alumina Fiber |
| Thermocouple Type | Type B Dual Platinum-Rhodium (Pt–30%Rh / Pt–6%Rh) |
| Control System | 30-Stage Programmable PID Controller |
| Power Supply | AC 220 V, 50 Hz |
| External Dimensions | 380 × 410 × 620 mm |
| Net Weight | 30 kg |
| Safety Certifications | CE, UL/MET/CSA (components >24 V), optional TÜV or CSA single-unit certification available upon request |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | MSK-AFA-III |
| Instrument Type | Benchtop Box-Type Coating & Drying System |
| Max Temperature | 200°C |
| Temperature Control Accuracy | ±1°C |
| Max Heating Power | 1500 W |
| Max Ramp Rate | 10°C/min |
| Push Rod Travel | 10–250 mm (adjustable) |
| Push Rod Speed | 0–100 mm/sec (adjustable, ±10 mm/sec repeatability) |
| Vacuum Platen Dimensions | 365 mm × 200 mm (Aluminum) |
| Coater Blade Width | 100 mm (adjustable gap: 0.01–3.5 mm) |
| Overall Dimensions | 550 mm × 330 mm × 320 mm (L×W×H) |
| Certification | CE |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Rod Extraction Machine for Sapphire |
| Spindle Motor Power | 7.5 kW |
| Servo Motors (X/Y/Z) | 2.5 kW / 2.5 kW / 2.5 kW |
| X-Axis Travel | 1020 mm |
| Y-Axis Travel | 510 mm |
| Z-Axis Travel | 635 mm |
| Spindle Nose to Table Distance | 100–735 mm |
| Table Size | 1220 mm × 520 mm |
| T-Slot Specification | 18 mm × 5 slots × 100 mm pitch |
| Maximum Load Capacity | 800 kg |
| Rapid Traverse Rates (X/Y/Z) | 20 / 20 / 18 m/min |
| Machine Dimensions | 2880 mm × 2540 mm × 2756 mm |
| Footprint | 4500 mm × 3000 mm |
| Net Weight | 6000 kg |
| Cutting Speed | 3–5 mm/min (sapphire-specific) |
| Compatible Tool Length | up to 360 mm |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | Single-Wafer Cassette |
| Dimensions (Φ2") | 60 mm Ø × 11 mm H |
| Dimensions (Φ4") | 110 mm Ø × 12 mm H |
| Dimensions (Φ6") | 160 mm Ø × 16 mm H |
| Material | Semi-Transparent Polypropylene (PP) or Polycarbonate (PC), Chemically Resistant & Autoclavable |
| Configuration | One-piece cassette body with hinged lid and integrated elastomeric wafer retention fingers |
| Compliance | Designed for Class 100–Class 1000 cleanroom environments per ISO 14644-1 |
| Brand | Heller |
|---|---|
| Origin | USA |
| Model | Mark III |
| Instrument Type | Box-type Reflow/Curing Oven |
| Max Temperature | 400 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 2500 W |
| Heating Rate to Max Temp | 15 min |
| Heating Method | Resistive Wire Heating |
| Internal Chamber Dimensions | 450 × 150 × 180 mm |
| Compliance | SMEMA-compatible |
| Cooling | Water-cooled BlowThru Module |
| Flux Recovery | Integrated Drain Tube with Collection Jar |
| Vacuum Option | Optional Vacuum Module (Model 755 compatible) |
| Nitrogen Atmosphere | Optional |
| Conveyor Width Range | 75–250 mm |
| Cycle Time Range | 7.5 min to several hours |