Constant Temp/Heating/Drying Equipment
Filter
Showing 1711–1740 of 3291 results
| Brand | Kylin-Bell |
|---|---|
| Origin | Jiangsu, China |
| Model | GL-150B |
| Temperature Range | Ambient +5°C to 150°C (digital control) |
| Temperature Accuracy | ±0.5°C |
| Heating Time to 100°C | ≤15 min |
| Dimensions (W×D×H) | 250 × 180 × 160 mm |
| Net Weight | 3–5 kg |
| Maximum Power | 200 W |
| Standard Block Configuration | Two 95 × 25 × 50 mm aluminum heating blocks |
| Sample Capacity (per block) | 35 × 0.5 mL tubes |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | 202-1EBS |
| Power Supply | 220 V AC, 1800 W |
| Internal Chamber Dimensions | 350 × 450 × 450 mm (W × D × H) |
| External Dimensions | 515 × 740 × 655 mm (W × D × H) |
| Price | USD 410 (FOB Shanghai) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | DHG-9070A |
| Voltage | 220 V, 50 Hz |
| Temperature Control Accuracy | ±0.1 °C |
| Temperature Uniformity | ±1 °C |
| Timer Range | 0–9999 min |
| Chamber Material | Stainless Steel with Viewing Window (A-series) |
| Compliance | Meets GB/T 5170.2 (Chinese National Standard for Environmental Testing Equipment – Temperature Test) |
| Brand | LabCompanion |
|---|---|
| Model | CKC Series |
| Type | Forced-Air Circulating Clean Drying Oven |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (Guangdong Hongzhan Instrument Co., Ltd.) |
| Cleanliness Class | ISO Class 5 (100 Class) |
| Oxygen Level Control | ≤2% O₂ (optional inert gas purge configuration) |
| Construction | Stainless steel interior & exterior, double-wall insulated chamber |
| Airflow System | Precision-balanced horizontal forced-air circulation with optimized outlet diffuser array |
| Filtration | Dual-stage high-efficiency particulate air (HEPA) filtration (H14 grade, ≥99.995% @ 0.3 µm) |
| Temperature Uniformity | ±0.5°C across working volume (per IEC 60068-3-5) |
| Cooling Rate | Up to 1.5°C/min (typical, dependent on setpoint delta and chamber load) |
| Compliance | Designed per ISO 14644-1, ISO 14644-3, and GB/T 2423.2–2012 (IEC 60068-2-2) |
| Brand | LabCompanion |
|---|---|
| Model | CS101 |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (Guangdong) Co., Ltd. |
| Category | Forced-Air Drying Oven |
| Interior Dimensions (H×W×D) | 750 × 600 × 500 mm |
| Exterior Dimensions (H×W×D) | ≈1230 × 1100 × 680 mm |
| Power Supply | 220 V, 50 Hz |
| Heating Power | 4.0 kW |
| Operating Temperature Range | Ambient +10 °C to 250 °C |
| Temperature Uniformity | ±1.6% of setpoint |
| Control Accuracy | ±0.5 °C |
| Heating Rate | Ambient to 100 °C in ≈15 min |
| Insulation | 80 mm glass wool |
| Heating Element | Stainless steel sheathed tubular heater (bottom-mounted) |
| Air Circulation | Dual-channel horizontal forced-air system |
| Fan Motor | 40 W |
| Temperature Sensor | Pt100 RTD |
| Controller | Digital PID with LED display, keypad input, auto-hold function |
| Timer Range | 0.01–99.99 h with audible alarm and heating cutoff |
| Safety Protections | Short-circuit, overload, motor thermal overload, phase-loss protection |
| Standard Accessories | 2 stainless steel wire mesh shelves (SUS430, ≥1.2 mm thick) |
| Outer Casing | SECC cold-rolled steel (≥1.5 mm), powder-coated light gray finish |
| Inner Chamber & Air Duct | SUS430 stainless steel (≥1.2 mm thick) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CS101-128 |
| Instrument Type | General-Purpose Forced-Air Oven |
| Temperature Range | RT + 5°C to 200°C |
| Temperature Uniformity | ±1°C |
| Temperature Fluctuation | ±1°C |
| External Dimensions (W×D×H) | 640 × 750 × 900 mm |
| Internal Chamber Dimensions (W×D×H) | 500 × 550 × 605 mm |
| Interior Material | Mirror-Finish Stainless Steel |
| Heating Method | Forced-Air Circulation with Imported Motor and Impeller |
| Power Rating | 1800 W |
| Temperature Resolution | 1°C |
| Timer Range | 1–9999 min |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Optional Features | Φ25 mm test port, multi-segment programmable LCD temperature controller |
| Warranty | 12 months |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CS101-1EB |
| Temperature Range | 50 °C to 200 °C (optional up to 300 °C) |
| Temperature Stability | ±1.0 °C |
| Temperature Uniformity | ±2.0–3.0 °C (standard), ±3.0–4.0 °C (larger chambers) |
| Heating Time | ~50 min (50 °C → 200 °C) |
| Interior Dimensions (W×D×H, mm) | 400 × 350 × 350 |
| Exterior Dimensions (W×D×H, mm) | 610 × 670 × 570 |
| Heating Power | 2000 W |
| Air Circulation | Sirocco fan (90 W, 1 unit) |
| Interior Material | Stainless steel (SUS304) |
| Exterior Material | Powder-coated steel plate |
| Insulation | Glass wool |
| Safety Features | No-fuse breaker, over-temperature limit switch, protection fuse |
| Standard Accessories | Mechanical timer, 2 adjustable stainless-steel shelves |
| Power Supply | 220 VAC ±10%, 3-phase or single-phase, 50/60 Hz |
| Current Rating | 10.5 A (3Ø) / 12.6 A (1Ø) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (OEM/ODM Producer) |
| Model | CS101-1EB |
| Temperature Range | 50°C to 200°C (optional up to 300°C) |
| Temperature Stability | ±1.0°C |
| Temperature Uniformity | ±2.0–3.0°C (standard), ±3.0–4.0°C (larger chambers) |
| Heating Rate | ~50 min (50°C → 200°C) |
| Interior Dimensions (W×D×H, mm) | 400×350×350 |
| Exterior Dimensions (W×D×H, mm) | 610×670×570 |
| Heating Power | 2000 W |
| Air Circulation | Forced-air convection via sirocco fan (90 W × 1) |
| Chamber Material | Interior – AISI 304 stainless steel |
| Insulation | High-density glass wool |
| Safety Systems | Dual overtemperature limit protection, thermal cut-off fuse, no-fuse circuit breaker |
| Standard Accessories | Mechanical timer, 2 adjustable stainless-steel shelves |
| Power Supply | 220 VAC ±10%, 3-phase or single-phase, 50/60 Hz |
| Current Draw | 10.5 A (1Ø), 12.6 A (3Ø) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | CS101-1EBN |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (to 300°C) |
| Control System | PID with PT100 Sensor |
| Display | LED digital (set & actual temperature) |
| Timer Range | 0–999 min |
| Interior Material | SUS304 mirror-finish stainless steel |
| Exterior Material | Powder-coated cold-rolled steel |
| Insulation | Ultra-fine glass fiber |
| Viewing Window | High-temperature tempered glass |
| Door Seal | Eco-friendly silicone rubber |
| Exhaust Port | Φ45 mm (rear-mounted) |
| Heating Element | Nickel-chromium alloy wire |
| Safety Features | Independent over-temperature protection, over-current protection |
| Internal Dimensions (W×D×H) | 450×400×400 mm |
| External Dimensions (W×D×H) | 610×575×905 mm |
| Net Volume | 72 L |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Compliance | JB/T 5520–1991 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | CS101-E |
| Pricing | Upon Request |
| Circulation Method | Forced Convection |
| Temperature Range | R.T. +10°C to 300°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±2.5% |
| Heating Rate (to 200°C) | ≤70 min |
| Control System | PID Digital Controller with Self-Tuning |
| Temperature Sensor | Industrial Platinum RTD (PT100) |
| Display | Dual LED Display (Set & Actual Temperature) |
| Timer Range | 0–999 min |
| Interior Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-Painted Cold-Rolled Steel with High-Temp Silver Coating (EN variant) |
| Exterior Material | Powder-Coated Cold-Rolled Steel with Anti-Rust Treatment |
| Viewing Window | Double-Layer Heat-Resistant Tempered Glass |
| Insulation | Ultra-Fine Glass Fiber |
| Door Seal | Eco-Friendly Silicone Rubber Gasket |
| Exhaust Port | Φ45 mm × 1 (Rear-Mounted) |
| Blower | Centrifugal Fan with Condenser Motor |
| Heating Element | Nickel-Chromium Alloy Sheathed Heater |
| Safety Features | Independent Over-Temperature Protection Circuit & Over-Current Trip Breaker |
| Internal Dimensions (W×D×H, mm) | 450×400×400 / 550×500×500 / 650×600×600 |
| External Dimensions (W×D×H, mm) | 610×575×905 / 710×675×1025 / 810×775×1175 |
| Capacity | 72 L / 137.5 L / 234 L |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW / 2.5 kW / 3.0 kW |
| Standard Compliance | JB/T 5520–1991 (Technical Specifications for Drying Ovens) |
| Accessories Included | 2 Stainless Steel Shelves, 4 Shelf Supports, Full User Manual |
| Optional Accessories | Additional Shelves, Programmable Temperature Controller, Cable Port (Φ50 mm), RS485 Communication Interface |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | CS101-E |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Method | Nickel-Chromium Alloy Heaters |
| Control System | PID Digital Controller with PT100 Sensor |
| Air Circulation | Forced Convection (Centrifugal Blower) |
| Interior Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-treated Cold-Rolled Steel (EN variant) |
| Insulation | High-Density Fiberglass |
| Safety Features | Over-Temperature Protection, Over-Current Circuit Breaker |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Internal Volume | 72 L |
| Interior Dimensions (W×D×H) | 450 × 400 × 400 mm |
| Exterior Dimensions (W×D×H) | 610 × 575 × 905 mm |
| Standard Accessories | 2 Stainless Steel Shelves, 4 Shelf Supports, User Manual |
| Brand | LabCompanion |
|---|---|
| Model | CS101-E |
| Type | Forced-Convection Benchtop Drying Oven |
| Temperature Range | RT+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 300°C) | ≤70 min |
| Control System | Microprocessor-Based PID with Auto-Tuning |
| Temperature Sensor | Industrial PT100 Platinum Resistance Thermometer |
| Chamber Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-Painted Cold-Rolled Steel (EN variant) |
| Insulation | High-Density Ultra-Fine Glass Fiber |
| Viewing Window | Double-Layer Tempered Heat-Resistant Glass |
| Safety Features | Independent Over-Temperature Cut-Off, Over-Current Circuit Breaker |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Internal Volume | 72 L |
| Interior Dimensions (W×D×H) | 450 × 400 × 400 mm |
| External Dimensions (W×D×H) | 610 × 575 × 905 mm |
| Standard Accessories | 2 Stainless Steel Shelves, 4 Shelf Supports, User Manual |
| Brand | LabCompanion |
|---|---|
| Model | CS101-E |
| Type | Forced-Air Circulating Drying Oven |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 300°C) | ≤70 min |
| Control System | Microprocessor-based PID Controller with Self-Tuning |
| Temperature Sensor | Industrial Platinum RTD (PT100) |
| Interior Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-treated Cold-Rolled Steel (EN variant) |
| Insulation | High-Density Ultra-Fine Glass Fiber |
| Viewing Window | Double-Layer Heat-Resistant Tempered Glass |
| Safety Features | Independent Over-Temperature Protection, Over-Current Circuit Breaker |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW (CS101-1EBN), 2.5 kW (CS101-2EBN), 3.0 kW (CS101-3EBC) |
| Internal Volume | 72 L / 137.5 L / 234 L |
| Compliance | JB/T 5520–1991 Technical Specification for Drying Ovens |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CS101-E |
| Pricing | Upon Request |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 200°C) | ≤70 min |
| Control System | PID with LED Digital Display |
| Sensor | Industrial PT100 Platinum Resistance Thermometer |
| Heating Element | Nickel-Chromium Alloy |
| Air Circulation | Forced Convection via Centrifugal Blower |
| Interior Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-treated Cold-Rolled Steel (EN variant) |
| Insulation | Ultra-Fine Glass Fiber |
| Door Seal | Eco-Friendly Silicone Rubber |
| Viewing Window | Double-Layer High-Temperature Tempered Glass |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Internal Dimensions (W×D×H) | 450×400×400 mm |
| External Dimensions (W×D×H) | 610×575×905 mm |
| Net Volume | 72 L |
| Safety Features | Independent Over-Temperature Protection, Thermal Cut-Out Circuit Breaker |
| Compliance | JB/T 5520–1991 “Technical Specifications for Drying Ovens” |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CS101-E |
| Pricing | Upon Request |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 200°C) | ≤70 min |
| Control Method | PID with PT100 Sensor |
| Display | LED Digital (Set & Actual Temp) |
| Timer Range | 0–999 min |
| Interior Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-treated Cold-Rolled Steel (EN variant) |
| Insulation | Ultra-Fine Glass Fiber |
| Viewing Window | Double-Layer Heat-Resistant Tempered Glass |
| Air Circulation | Centrifugal Blower with Condenser Motor |
| Heating Element | Nickel-Chromium Alloy Sheathed Heater |
| Safety Features | Independent Over-Temperature Protection, Thermal Cut-Out Circuit Breaker |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Internal Dimensions (W×D×H) | 450×400×400 mm |
| Internal Volume | 72 L |
| Compliant With | JB/T 5520–1991 “Technical Specifications for Drying Ovens” |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CS101-E Series (CS101-1EBN / CS101-2EBN / CS101-3EBC) |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 200°C) | ≤70 min |
| Control System | Microprocessor-based PID with Auto-Tuning |
| Temperature Sensor | Industrial-grade PT100 Platinum Resistance Thermometer |
| Chamber Liner | SUS304 Mirror-Finish Stainless Steel (BN models) or Pre-treated Cold-Rolled Steel (EN models) |
| Insulation | High-Density Ultra-Fine Glass Fiber |
| Viewing Window | Double-Layer Tempered Heat-Resistant Glass |
| Safety Features | Independent Over-Temperature Protection, Over-Current Circuit Breaker |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW / 2.5 kW / 3.0 kW |
| Internal Volume | 72 L / 137.5 L / 234 L |
| Compliance | JB/T 5520–1991 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | CS101-E Series (CS101-1EBN / CS101-2EBN / CS101-3EBC) |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 200°C) | ≤70 min |
| Control System | Microprocessor-based PID with Auto-Tuning |
| Temperature Sensor | Industrial-grade PT100 Platinum Resistance Thermometer |
| Heating Element | Nickel-Chromium Alloy Sheathed Heater |
| Air Circulation | Centrifugal Blower with Adjustable Airflow |
| Inner Chamber Material | SUS304 Mirror-Finish Stainless Steel (BN models) or Pre-Painted Cold-Rolled Steel with High-Temp Silver Paint (EN models) |
| Outer Casing | Powder-Coated Cold-Rolled Steel |
| Insulation | High-Density Ultra-Fine Glass Fiber (≥100 mm thickness) |
| Viewing Window | Double-Layer Tempered Heat-Resistant Glass |
| Door Seal | Environmentally Compliant Silicone Rubber Gasket |
| Exhaust Port | Φ45 mm × 1 (rear-mounted) |
| Safety Features | Independent Over-Temperature Cut-Off, Thermal Fuse, and Circuit Breaker with Over-Current Protection |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW / 2.5 kW / 3.0 kW |
| Internal Volume | 72 L / 137.5 L / 234 L |
| Standard Accessories | 2 Stainless Steel Shelving Plates + 4 Adjustable Shelf Supports + Full Technical Manual |
| Optional Upgrades | Programmable Ramp-Soak Controller, RS485 Modbus Interface, Cable Entry Ports, Additional Shelving Kits |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | 20L |
| Instrument Type | General-Purpose Drying Oven |
| Temperature Range | RT +10°C to 300°C |
| Temperature Uniformity | ±0.5°C |
| External Dimensions (W×D×H) | 1195×890×2060 mm |
| Internal Chamber Dimensions (W×D×H) | 940×700×1400 mm |
| Chamber Material | Stainless Steel (AISI 304) or Galvanized Steel |
| Heating Method | Forced-Air Convection / Thermal Oil Heating |
| Power Supply | AC 220 V, 50 Hz (Internal Heating) |
| Temperature Resolution | 0.1°C |
| Temperature Stability | ±0.5°C at Setpoint |
| Programmable Timer Range | 1–9999 minutes/hours |
| Optional Controller | Intelligent LCD Programmable Controller (‘D’ Series) |
| Brand | LabCompanion |
|---|---|
| Model | DGF |
| Type | Forced-Convection Constant-Temperature Drying Oven |
| Temperature Range | R.T.+10°C to 300°C (DGF 3002B–3006B) |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C (≤±1°C for higher-range models) |
| Heating Method | Nickel-Chromium Alloy Heaters |
| Control System | Microprocessor-Based PID Controller with PT100 Sensor |
| Timer Range | 0–999 min |
| Internal Volume | 110–640 L |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Construction | Inner Chamber – SUS304 Stainless Steel (BN variants) or Pre-treated Cold-Rolled Steel (N variants) |
| Safety Features | Independent Over-Temperature Protection Circuit |
| Compliance | JB/T 5520–1991 Technical Specification for Drying Ovens |
| Optional Accessories | Programmable Temperature Controller, RS232/RS485 Interface, Chart Recorder, Additional Shelves, Observation Window, Φ50 Cable Port, Casters (4), Two Standard Shelves, User Manual |
| Brand | LabCompanion |
|---|---|
| Model | DGG-9030A |
| Type | General-Purpose Forced-Convection Oven |
| Temperature Range | RT +10°C to 300°C |
| Temperature Uniformity | ±1°C |
| Temperature Resolution | 0.1°C |
| Heating Rate | 1.0–3.0°C/min |
| Timer Range | 1–9999 min |
| Inner Chamber Material | Stainless Steel (Austenitic 304, Argon Arc Welded) |
| Outer Casing | Cold-Rolled Steel with Epoxy Powder Coating |
| Viewing Window | Dual-Layer Tempered Glass |
| Air Circulation | High-Temperature-Resistant Imported Centrifugal Blower + Optimized Tangential Airflow Duct Design |
| Operating Environment | 5–35°C ambient, ≤85% RH |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | DHG-9000 |
| Instrument Type | General-Purpose Forced-Air Oven |
| Temperature Range | RT + 10 °C to 300 °C |
| Temperature Uniformity | ±0.5 °C |
| External Dimensions (W×D×H) | 1195 × 890 × 2060 mm |
| Internal Chamber Dimensions (W×D×H) | 940 × 700 × 1400 mm |
| Chamber Material | Stainless Steel (AISI 304 equivalent, 1Cr18Ni9Ti) or Galvanized Steel |
| Heating Method | Forced-air convection with axial fan circulation and auxiliary oil-heating option |
| Power Supply | Internal heating: AC 220 V, 50 Hz |
| External heating | AC 380 V, 50 Hz |
| Temperature Resolution | 0.1 °C |
| Temperature Stability | ±0.5 °C at setpoint |
| Timer Range | 1–9999 min/h |
| Optional Controller | “D”-series programmable LCD controller with multi-step ramp-soak profiles |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (OEM/ODM Capable) |
| Type | General-Purpose Forced-Convection Drying Oven |
| Temperature Range | RT +10°C to 300°C |
| Temperature Uniformity | ±0.5°C (at 100°C, steady state) |
| External Dimensions (W×D×H) | 1195 × 890 × 2060 mm |
| Internal Chamber Dimensions (W×D×H) | 940 × 700 × 1400 mm |
| Chamber Material | 1Cr18Ni9Ti Stainless Steel (AISI 304 equivalent) |
| Heating Method | Horizontal Forced-Air Circulation with Dual-Side Heaters |
| Power Supply | AC 220 V / 50 Hz (Internal Heating), AC 380 V / 50 Hz (Optional External Heating Circuit) |
| Temperature Resolution | 0.1°C |
| Temperature Stability | ±0.5°C (measured at center point per ISO 17025-compliant validation protocol) |
| Timer Range | 1–9999 minutes/hours |
| Controller | Standard PID Digital Controller (D-Series Optional: Programmable LCD Controller with Ramp-Soak Profiles & Data Logging) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9005 |
| Instrument Type | General-Purpose Drying Oven |
| Temperature Range | RT + 10°C to 300°C |
| Temperature Uniformity | ±0.5°C |
| External Dimensions (W×D×H) | 1195 × 890 × 2060 mm |
| Internal Chamber Dimensions (W×D×H) | 940 × 700 × 1400 mm |
| Interior Material | Stainless Steel (1Cr18Ni9Ti) or Galvanized Steel |
| Heating Method | Forced-Air Convection with Optional Thermal Oil Heating |
| Power Supply | AC 220 V, 50 Hz (Internal Heating) |
| Temperature Resolution | 0.1°C |
| Temperature Stability | ±0.5°C |
| Timer Range | 1–9999 min/h |
| Programmable Controller Option | “D” Series LCD Microprocessor-Based Controller |
| Key | Brand: LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | DHG-9005D |
| Temperature Range | RT+10°C to 300°C |
| Temperature Uniformity | ±0.5°C |
| Internal Dimensions (W×D×H) | 300×280×350 mm |
| External Dimensions (W×D×H) | 445×490×700 mm |
| Chamber Material | Stainless Steel (1Cr18Ni9Ti) |
| Heating Method | Forced-Air Circulation |
| Power Supply | AC 220 V, 50 Hz |
| Temperature Resolution | 0.1°C |
| Timer Range | 1–9999 min/h |
| Controller Type | Intelligent Programmable LCD Controller |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | FO-800 |
| Pricing | Available Upon Request |
| Temperature Range | RT + 10°C to 200°C (standard), optional up to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤60 min (from RT to 200°C) |
| Chamber Volume | 72 L (FO-800 base configuration) |
| Interior Dimensions (W×D×H) | 450 × 400 × 400 mm |
| Exterior Dimensions (W×D×H) | 610 × 575 × 905 mm |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Control System | Microprocessor-based PID controller with auto-tuning |
| Temperature Sensor | Industrial-grade PT100 platinum resistance thermometer |
| Heating Element | Nickel-chromium alloy sheathed heater |
| Air Circulation | Forced convection via centrifugal blower |
| Insulation | High-density ultra-fine glass fiber (≥100 mm thickness) |
| Interior Material | Mirror-finish SUS304 stainless steel |
| Exterior Material | Powder-coated cold-rolled steel |
| Viewing Window | Double-layer heat-resistant tempered glass |
| Door Seal | Environmentally compliant silicone rubber gasket |
| Exhaust Port | Φ45 mm (rear-mounted, single) |
| Safety Features | Independent over-temperature cut-off, thermal fuse, and over-current circuit breaker |
| Compliance | JB/T 5520–1991 “Technical Specifications for Drying Ovens” |
| Standard Accessories | 2 adjustable stainless steel shelves, 4 shelf supports, user manual |
| Optional Accessories | Programmable temperature controller (up to 99 segments), RS485 communication interface, additional shelves, cable ports |
| Brand | LabCompanion |
|---|---|
| Model | FO-8000 |
| Temperature Range | 100–800 °C |
| Chamber Dimensions (W×H×D) | 300×200×120 mm |
| External Dimensions (approx.) | 450×450×580 mm |
| Control System | Microprocessor-Based PID Controller with Digital Keypad Input |
| Heating Element | Embedded Ceramic Heating Plates with Kanthal A1 Resistance Wire |
| Insulation | Lightweight Ceramic Fiber Liner (Dual-Layer Shell) |
| Safety Features | Automatic Spring-Loaded Door, Over-Temperature Protection, Thermal Cut-Out, Ground Fault Detection |
| Compliance | Designed for GLP/GMP-aligned laboratory workflows |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GZX |
| Power Options | 3.0 kW / 4.0 kW / 6.0 kW |
| Temperature Range | RT+10°C to 300°C or RT+20°C to 450°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (RT+10°C → 300°C) / ≤80 min (RT+20°C → 450°C) |
| Air Exchange Rate | 5–200 cycles/hour |
| Internal Dimensions (W×D×H, cm) | 50×60×75 |
| External Dimensions (W×D×H, cm) | 67×106×96 |
| Control System | Microprocessor-based PID controller with auto-tuning |
| Temperature Sensor | Industrial-grade PT100 platinum resistance thermometer |
| Display | LED digital display for both setpoint and actual temperature |
| Timer Range | 0–999 minutes |
| Construction | Cold-rolled steel outer shell with epoxy powder coating |
| Interior options | SUS304 stainless steel (BN variant) or high-temp silver-painted cold-rolled steel (N variant) |
| Insulation | High-density polyurethane foam + glass fiber composite |
| Door Seal | Eco-friendly silicone rubber gasket |
| Heating Element | Ni-Cr alloy wire heater |
| Safety Features | Independent over-temperature protection, thermal cut-off, over-current circuit breaker |
| Standard Compliance | JB/T 5520–1991 Technical Specifications for Drying Ovens |
| Optional Accessories | Programmable temperature controller, RS232/RS485 communication port, chart recorder, additional shelves, observation window, Φ50 cable feedthrough |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GZX-14 |
| Pricing | Upon Request |
| Internal Dimensions (W×H×D) | 450×400×400 mm / 550×500×500 mm / 650×600×600 mm |
| External Dimensions | 610×905×575 mm / 710×1025×675 mm / 810×1175×775 mm |
| Construction | Exterior – Powder-Coated Steel |
| Insulation | High-Efficiency Compressed Glass Wool |
| Heating System | Finned-Tube Electric Heaters |
| Air Circulation | Forced Convection with Optimized Outlet Design |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Uniformity | ±1.5°C at setpoint |
| Temperature Stability | ±1.0°C |
| Control System | Microprocessor-Based PID Controller with Dual Display (Setpoint & Actual), Auto-Tuning Function |
| Safety Protections | Dual-Stage Overtemperature Protection (ALM1 Visual/Audible Alert + ALM2 Cut-off), MCCB Overload Protection, Ceramic Fuse, Non-Fuse Circuit Breaker, Post-Heating Fan Delay Shutdown |
| Power Supply | 3-phase 380 VAC ±10% or Single-Phase 220 VAC ±10% |
| Accessories | 2–6 Adjustable Stainless Steel Shelves |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GZX1 |
| Power Options | 3.0 kW / 4.0 kW / 6.0 kW |
| Temperature Range | RT+10°C to 300°C or RT+20°C to 450°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (RT+10→300°C), ≤80 min (RT+20→450°C) |
| Air Exchange Rate | 5–200 cycles/hour |
| Internal Dimensions (W×D×H, cm) | 50×60×75 |
| External Dimensions (W×D×H, cm) | 67×106×96 |
| Control System | Microprocessor-based PID controller with auto-tuning |
| Temperature Sensor | Industrial-grade PT100 platinum resistance thermometer |
| Display | LED digital display for both setpoint and actual temperature |
| Timer Range | 0–999 minutes |
| Insulation | High-density polyurethane foam + glass fiber |
| Door Seal | Environmentally compliant silicone rubber gasket |
| Heating Element | Ni-Cr alloy wire heater |
| Safety Features | Independent over-temperature protection, thermal cutoff fuse, over-current circuit breaker |
| Standard Compliance | JB/T 5520–1991 Technical Specifications for Drying Ovens |
| Optional Accessories | Programmable temperature controller, RS232/RS485 communication port, chart recorder, additional shelves, observation window, Φ50 cable feedthrough |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GZX2 |
| Construction | Cold-Rolled Steel Exterior with Epoxy Powder Coating |
| Interior | SUS304 Stainless Steel (BN variant) or High-Temperature Silver-Painted Cold-Rolled Steel (N variant) |
| Insulation | High-Density Polyurethane Foam + Glass Fiber |
| Door Seal | Eco-Friendly Silicone Rubber Gasket |
| Heating Element | Nickel-Chromium Alloy Resistance Heater |
| Temperature Controller | Imported Intelligent PID Controller with Auto-Tuning |
| Temperature Sensor | Industrial Platinum RTD (PT100) |
| Display | LED Digital Display for Both Setpoint and Actual Temperature |
| Temperature Range | R.T.+10°C to 300°C / R.T.+20°C to 450°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (R.T.+10°C → 300°C) |
| Air Circulation | Forced Convection via Horizontal Centrifugal Fan |
| Air Exchange Rate | 5–200 times/hour |
| Timer Range | 0–999 minutes |
| Power Supply | AC 220 V ±10%, 50 Hz ±0.5 Hz |
| Power Rating | 3.0 kW / 4.0 kW / 6.0 kW |
| Internal Dimensions (W×D×H, cm) | 50×60×75 |
| External Dimensions (W×D×H, cm) | 67×106×96 |
| Safety Features | Independent Over-Temperature Protection, Thermal Cut-Off, Over-Current Circuit Breaker |
| Standard Compliance | JB/T 5520–1991 Technical Specification for Drying Ovens |
| Optional Accessories | Programmable Temperature Controller, RS232/RS485 Communication Port, Chart Recorder, Additional Shelving, Observation Window, Φ50 Cable Entry Port |